Dell Venue Pro 8 - Set Sleep Mode To Never On Power Management Option?
Mar 9, 2014
I recently purchased a DVP8 and I love this thing. Problem is, it suffers from wifi issues in that once it goes to sleep, the wifi automatically goes to "limited" and I need to retoggle the wifi setting to get it connected. I've tried all kinds of fixes - uninstall windows updates and reinstalling drivers, but to no avail.
So I basically said screw it, and set "sleep mode" to never on the power management option, and no more wifi issues. Seems like the wifi doesn't reactive properly when coming out to sleep mode. My question is - will this damage the tablet in the long run? In terms of battery life, I would think the main factor is the screen on time. I can just turn the screen off with a tap of the power button. Is there really that big of a difference?
I have ASUS S400CA windows 8.1(upgraded from windows8). When I right click for openwith for jpg,png files, I get option of opening with Photo gallery. But in my Dell venue pro tablet with Windows 8.1, I don't get this option. Any way to get it in dell venue 8 pro?
I have turned sleep mode off in power settings and turned off requirement for password yet after no activity within a very short space of time I am required to log back in. How do I disable these functions for good ??
issue with my laptop where I can't allow it to enter sleep mode or else it will restart/appear to have restarted the next time I wake it up. At first I thought it might be a power options issue, but I made sure that the computer was set to sleep and not restart when I close the lid. I've checked the bluescreen viewer and the cause of the restart seems to come from a driver power state failure coming from ntoskrnl.exe+1fcc1e, hal.dll+6a37, and storport.sys+33f0.
I've already run sfc/scannow to check for damaged files and I was also able to replace them using a DISM command, so now scanning the computer doesn't run into any errors, but this driver error still persists.
Sidenote: The driver errors mainly started after I reinstalled Kaspersky onto my computer to fix some issues that I had with it. Before that I was getting a couple of kernel data inpage errors, the latest of which occurred June 1.
I'm having a BSOD problem. After walking computer from sleep mode, within 1-2 minutes it will get a BSOD with the "driver power state failure" error and restart, but interestingly I never get the error the moment I wake up the computer. I'm using a Lenovo IdeaPad Y510P with Windows 8.1 64-bit. I already tried uninstalling the Intel HD 4000 driver, restarting computer, and installing the one on Lenovo's site (as this was suggested on the Lenovo forum as a common fix) but it didn't work.
The problem only started occurring after one of the following: - Updating Malwarebytes to latest last week - Installing a Windows update last week (there were 3 installed components, 1 of them was an Intel HD 4000 driver update, forgot what the other 2 were) - Updating GeForce Experience and latest NVIDIA Graphics Driver (337.88), it included NVIDIA PhysX System Software 9.13.1220
Here is a log created by WinDbg tool: 'BSOD dump' | TextUploader.com Here is a log created by BluescreenView: ================================================== Dump File : 060514-96281-01.dmp Crash Time : 6/5/2014 7:23:39 PM Bug Check String : DRIVER_POWER_STATE_FAILURE Bug Check Code : 0x0000009f Parameter 1 : 00000000`00000003
[Code] .....
The full minidump .dmp file is attached. In case attachments don't work here is the full minidump .dmp file uploaded: [URL] .....
My laptop (Latitude E6420) can't enter sleep mode either when I close the lid or select Sleep command from Start menu.It's a new hard drive with clean Windows 8.1 Pro.All latest drivers have been installed (downloaded right from Dell's site)
I tried to run powercfg /energy command as it's suggested on some web-site. It reported about 6 errors. First 5 of them are about USB suspend and the latest is about disabled PCI ASPM.Here you can download full report: [URL] .... Maybe I should re-install some drivers?
I have an Insipron 17R, core i5 zm2410, NVIDIA Geforce 525m, win8 64bit and I'm experiencing a problem with the hibernation/sleep mode.
About 2 weeks ago my laptop went to hibernation mode after beeing in sleep mode for 2 hours while on battery (to advoid full battery drain).
Now it doesn't do it anymore but stays in sleep mode for the whole time and drains the battery.
I usually detach the power cable from the laptop over night because of the noise from the power adapter and the laptop always hibernated after beeing in sleep mode. I went over the configuration in power options and power plans, and even reseted and configured them again, without success.
The only changes that were made to the system are the important windows updates...
I recently updated my Studio 1458 Notebook from 64-bit Windows 7 Ultimate to Windows 8 Pro. It is a 2.4GHz Intel Core i5-520M, 8 GB Shared Dual Channel DDR3 at 1066 MHz RAM, 512 MB ATI Mobility Radeon HD 4530 Video Card, 500 GB SATA @7200 RPM HDD.
Since upgrading, I have had no control over the Sleep function. I have changed all settings I can find on CONTROL PANEL<POWER OPTIONS, and still the system goes to "Sleep Mode" if I do not touch it for a few minutes. It even went to Sleep DURING the Windows 8 installation, which made it take longer than expected.
After I updated to windows 8.1 two things happened:
1-The laptop can't exit sleep mode.....it either restarts or stops working (with the screen off and the power light on) every time I try to exit sleep mode. i haven't been able to solve this problem.
2- When the screen turn off after leaving the laptop idle for a while it won't turn on....this happened after I installed the latest AMD display driver from the AMD website......I managed to solve the problem by downgrading to the AMD driver version provided on the dell website.......sadly this driver causes lagging in games on the contrast of the version provided on the AMD website.
Is there any chance of dualbooting Dell Venue 8 Pro with Windows 8 and Android? I like Windows 8 but would also like to be able to use Android on this awesome tablet.If not dual boot, is there any other way of using Android as virtual machine or something that provides full touch and other sensor's support?
I have a Dell Venue tablet running Windows 8.1 Pro (32-Bit) and have been having a bit of an issue getting PIN login to work since refreshing the tablet recently. I can access the settings and set a PIN for login, but when I unlock the screen it only allows a password to be put in.
I want to disable the "allow this device to wake the computer" to prevent the accidental pressing of the keyboard waking up the PC. This option doesn't exist though, like it does with the USB mouse. Is there a way around this?
On a Windows 8 tablet such as a Dell Venue 11 how to you type inputs for desktop programs without an attached keyboard? I don't know anything about Windows tablets.
I have Asus N550LF, always on boot or when i unplug the charger power management set to high performance which is causing the battery life to decrease ( wear level 7%), since i found out H.P. causes this i always set it to Balanced but its annoying to do it every time i boot up, any way to set it to default?
When I leave my computer after a session, it automatically goes into sleep mode after a period of time and remains that way till I wake it up.
However when I manually put it to sleep ( via shutdown options) , it goes to sleep immediately but for only a while ( a few minutes) then it shows the desktop screen again. If I then leave it alone after it self awake , it goes back to sleep as described above.
I have hp notebook with windows 8 OS. When I plugged in the charger the display totally disappears and the screen has black for only 1, 2 seconds. And the same situation is when i removed the charger. But this is not happened when i was using windows 7. Is this a problem or a feature of windows 8.
I recently upgraded to Windows 8 (64-bit) and noticed I don't have power options available. I own an HP Pavilion DV7, usually when I leave the laptop to do something over night, I go into "Choose what closing the lid does" and I get the error saying my power plan info is not available. Whenever I try to create a powerplan it tells me the same thing, but when I hit next, it tells me it can't find the file specified. I have no power options at the moment. I tried resetting to defaults using cmd, rebooted, and the only power option I had (Razer Gamebooster) was gone, and had nothing after.
I've been trying to change my power options. I go into Power Saver, "change plan settings," and try to change the "On battery" setting from "Put the computer to sleep: 3 minutes" to "Put the computer to sleep: Never." (I want to make this change because I have a Dell XPS, and it can have difficulties waking up from sleep.)
I've made this change a number of times, but after a while my computer simply reverts back to the 3 minute setting on its own. So, I leave the machine alone for a few minutes, I come back, and it's asleep...even though I thought I had changed the setting to 30 minutes. And in fact, I *had* changed the setting to 30 minutes; the computer is somehow reverting to 3 minutes on its own.
Use of the Power Saver Setting in Windows 8 lowers my pc temperature (at idle) by at least 6 degrees. Using this setting, my pc now idles at 27 degrees C. When I use High Performance, my idle temp is usually at least 33 degrees, or more. For those who have problems with their pc's running warm, this is just one of the things I've found which works for temperature lowering. My biggest impact on lowering temp was air cleaning the pc case interior - getting all the fuzzy balls out...... At one point, my idle temp was in the 50 to 60 degree range and I figured my disk was failing. After checking for a possible problem, I found much of the problem was my own maintenance procedure failure. So, if your pc seems to be running rather high, look around for the simple solutions - clean pc, use power settings, etc.
I have had to do a complete reset of my computer recently and ever since I did that I have not had the option of putting my computer to sleep even after checking all my drivers to see if they are up to date. I am also having a problem where when I turn on my computer It will stay a black screen even though all signs point to it working just nothing shows on the screen. After a complete shutdown by holding the power button and turning it back on it works but doesn't let me get into BIOS.
My windows 8 laptop no longer allows me to select an option out of Power Saver, Balanced, High Performance, Power4Gear Battery Saving, and Power4Gear High Performance. It is set to High Performance, and any time I try to click another option it immediately returns to High Performance.
I don't know how to wake my PC up without pressing power button. There's nothing wrong with doing it this way, it's just inconvenient. Can it wake on key press?
I'm running Windows 8 Pro 64 bit on a Dell Precision 490 desktop. I upgraded from XP so it was basically a clean install.
I have my power button configured to put the system to sleep and it will do that ONCE after I turn it on. After that, pushing the power button does nothing until the next reboot or power cycle. Going to Charms -> Settings -> Power -> Sleep always works.
This obviously isn't a critical problem, but it's really annoying because I'm in the habit of hitting the power button and usually it just doesn't work.
Things I've tried: - searching Google - can't find the needle in the haystack - searching this forum - nothing that matches - checking the Event Log - nothing interesting or suspicious - apply all Microsoft updates - no change - disable my Comodo Internet Security - no change - change power options and then change them back - no change - checked if I could stop and restart the power service - nope
I've been getting persistent BSOD's when attempting to wake up my computer (Lenovo Twist u230) from sleep. I am also sporadically getting Kernal Data Inpage Error BSOD while using my computer.
My machine is Windows 8, installed from factory with a recent refresh done. SFC /SCANNOW and DISM both come up clean. All of my hardware diagnostics are also clean.
I have a lenovo twist running windows 8.1. This computer will be running run fine but will freeze then come right back. It also will not wake up from a sleep at times and the only way to get it back on is to cut all power or hold down the power button until it shuts off. It just started not being able to do some of the windows updates.
