I have had to do a complete reset of my computer recently and ever since I did that I have not had the option of putting my computer to sleep even after checking all my drivers to see if they are up to date. I am also having a problem where when I turn on my computer It will stay a black screen even though all signs point to it working just nothing shows on the screen. After a complete shutdown by holding the power button and turning it back on it works but doesn't let me get into BIOS.
I recently purchased a DVP8 and I love this thing. Problem is, it suffers from wifi issues in that once it goes to sleep, the wifi automatically goes to "limited" and I need to retoggle the wifi setting to get it connected. I've tried all kinds of fixes - uninstall windows updates and reinstalling drivers, but to no avail.
So I basically said screw it, and set "sleep mode" to never on the power management option, and no more wifi issues. Seems like the wifi doesn't reactive properly when coming out to sleep mode. My question is - will this damage the tablet in the long run? In terms of battery life, I would think the main factor is the screen on time. I can just turn the screen off with a tap of the power button. Is there really that big of a difference?
My laptop won't go to sleep when It's plugged in for some reason, though if I take out the power cable it will sleep. If I have the power cable out, send it to sleep then plug the power cable in this doesn't wake it up.
I've gone into the power option's but I'm not too sure what I can really change to make it work.
I've changed the multimedia setting's to allow the computer to sleep.
I've tried the different power plans - same behaviour.
I just got a new Win 8 computer. I love it, however it wakes from sleep mode every 15 minutes on the dot. It will wake for about 2 minutes than sleep again.
Is this something it should do in order to get some air flow every once in a while or can I stop it from doing this? I have searched around online and tried everything i have come across. I turned off the setting that allows programs to wake the computer, as well as made sure the ethernet connection doesn't wake it.
Every few days my computer will BSOD when waking from sleep. The screen will display this message as the error "DRIVER_IRQL_NOT_LESS_OR_EQUAL cmudaxp.sys". Also sometimes the system will crash during sleep but no mini dump will be created. I have looked at the minidumps that were created and the only thing its pointed to were the cmudaxp.sys driver, hal.dll and ntoskrnl.exe. I tried reinstalling the 8.1.8.1822 drivers for the soundcard but that did not solve the problem. Today i reverted back to older drivers 8.0.8.1821 and will see if this fixes it. .dmp files included in attachment.
I have a custom built computer running Windows 8.1 64-bit. Recently, it stopped going to sleep on it's own (except the first time that the power plan is followed after boot). Otherwise, the monitor goes to sleep and that is it. After a bunch of other attempts and fixes, I have found that there is a driver that is blatantly disregarding powercfg settings (as seen here: [URL] .....). This has been going on for over a week. I have run sfc /scannow, and dism /online /cleanup-image /restorehealth with no luck.
I took my computer to a computer repairs to get my fan fixed and when I got it back I found that my computer kept crashing when waking from sleep. It happens every time and is inconvenient as it just resets. It also takes longer to turn on, it has a black screen for a short amount of time, it was not like this before, I can put up with the added turning on time but I need to be able to sleep and wake my laptop without issues.
The display and the sleep feature timers do not work. I just did a complete restore to try and correct this problem and another problem, which was no restore points and no ability to create one. The restore points are working for now, I mean that I was able to create a restore point. The display and sleep timer, not so, still a problem.
I've had this desktop Windows 8 computer since November and honestly I don't know if this has been a problem the whole time or not. Definitely, not the display, I know it has worked, but the sleep timer I'm not sure. I set the timer and just assume it sleeps and then goes into hibernation after a certain amount of time. With all the refreshing and restoring and changing over to this computer, I've not been paying much attention to the sound of the fan or the missing orange color on the power button (not visible, on the side of the computer).
I've set the timer through the Power Options feature in the Control Panel to 10 minutes for the sleep and to turn off the display to 3 minutes. Neither of them respond after set times. The computer is still wide awake and the display is not gone.
I have also gone to the "Change Advance Power Settings" menu box and turned off the hybrid sleep, which didn't work, and the Multimedia Settings in this menu box to turn on the setting "Allow The Computer To Sleep". Neither of these fixes did anything.
How can the computer not respond to something so basic and fundamental to its design?
Lastly, I'm wondering how this idea of powering down works at all. What I would like is for the computer to sleep after 20 minutes and then go into hibernation after 45 minutes. This would be when I'm done for the day. I have set the hibernation time in the "Change Advance Power Settings" menu box, but of course that does not respond either.
After updating from Windows 8 to Windows 8.1 my PC doesn't seem to want to sleep.
I've done some googling and cant really find anything. I found a command prompt thing I should do. I did that and it said nothing was keeping my computer awake.
I recently bought a new Dell Inspiron laptop with Windows 8 (first time 8 user). I am loving the computer so far and don't mind Windows 8. It is not nearly as bad as people have told me, just takes getting used to.
However, I have had a problem when I put my computer to sleep. The screen shuts off and the power button blinks slowly like a slept computer would. However, the computer continues to feel as warm as it does when it is on and running. I also had it unplugged overnight after I put it to sleep, and in the morning, the battery had died, which shouldn't happen when it is asleep. I am far from an expert but I figure that while the computer goes to sleep, some program may still be running to keep using all that power.
How can I fix this problem because I need to transport my laptop around, but don't want to put it in an enclosed case if it stays warm while asleep?
After my upgrade to 8.1 Pro my computer lost the ability to sleep/hibernate. After following many tips on here, I managed to get sleep & hibernation onto the shutdown menu so manual operatin works okay.
The automatic mode is still a work in progress but I'm wondering if I've managed to get it to go into automatic sleep mode but not as yet hibernation.
I prefer to use hibernation so don't really know alot about sleep mode - I've got it configured to go into hibernation (10 minutes ) before sleep (15 minutes) in the power options.
After a period of time the computer will automatically attempt to enter either sleep or hibernation mode - not sure which. The screen switches off and the cpu increases in volume as if its consuming more power. The blue light flashes slowly which to me signifies that it has entered sleep mode. The computer has in effect shut down but sounds like its in overdrive with either the cpu or fan going ten to the dozen. Clicking the mouse wakes it up and brings it back to the sign-on screen.
So what's going on here? Is this a failed attempt at sleep mode as trying manual sleep brings the same result. It certainly doesn't go into automatic hibernation which is something I'm ultimately trying to resolve.
So I'm not sure if I've solved automatic sleep or not as its unbearably noisy and not something I can put up with.
Almost every morning for the last month or so I will discover my computer is running (monitor off, but computer not in sleep mode as it should be). To figure out what was waking it, I went to cmd prompt and used the command "powercfg -waketimers":
C:WINDOWSsystem32>powercfg -waketimers Timer set by [SERVICE] DeviceHarddiskVolume1WindowsSystem32svchost.exe (Sys temEventsBroker) expires at 4:01:43 AM on 2/23/2014. Reason: Windows will execute 'NT TASKMicrosoftWindowsTaskSchedulerRegular Maintenance' scheduled task that requested waking the computer. I also tried "powercfg -lastwake":
[code]...
So it appears that "Regular Maintenance" is waking my computer. But why isn't it returning to sleep? It used to.
I then went to Power Options > Edit Plan Settings. These settings are still correct (Put the computer to sleep: 30 minutes).
Next I checked the Task Scheduler. Under "Active Tasks" I found "Regular Maintenance".
Next run time: 3:53 AM tomorrow. That very closely matches the 4:01 AM listed in "powercfg -waketimers", but I find it odd that it is after the scheduled time.
Triggers: At 3:00 AM every day
Doubling clicking on Regular Maintenance provides more detail.
Last Run Time: 5:46 AM
Last Run Result: operation completed successfully
However, another item in here is "Idle Maintenance".
Triggers: when computer is idle
Last Run Time: 5:46 AM
Last Run Result: The process terminated unexpectedly. (0x8007042B)
All of my drive partitions are scheduled to optimize weekly rather than daily. My computer is waking up daily.
Last night I turned all scheduled optimization off. This morning my computer was again woken from it sleep.
The cmd prompt gives me the same reason for the wake (Regular Maintenance).
Task Scheduler shows Regular Maintenance as:
Last Run Time: This morning at 4:36 AM
Last Run Result: The last run of the task was terminated by the user. (0x41306)
Under Idle Maintenance it shows nothing for this morning.
What does this mean? Optimization ran despite me turning it off?
Sometimes when my computer goes to sleep and I reactivate it some of my task bar options are lost
The date & display is no longer present neither is the volume control or my wifi display.
Also when this takes place I can no longer open any programs that are in the task bar I can simply click on them but nothing happens and when I attempt to open task manager it does not work I simply receive a black screen.
The only solution I have found so far is to restart and this solves the problem.
This is a new computer and I have only been using it for two or three days.
My Acer M5811 will not wake up from sleep mode on intermittent basis. Running Windows 8 Pro 64 bit. Power settings are disabled for both the monitor and CPU. I have also disabled "allow computer to shut off applications to save power" to devices. I never had this issue until I installed Windows 8 (clean install) from Windows 7. I have updated all drivers but have had no luck. The computer will wake up successfully several times, then it will not wake up. It appears to start up but the monitor remains in sleep mode. The only way to fix the problem is to shut down the computer and then restart. Acer M5811, purchased May 2010; i760 processor; 8 GB ram, ATI Radeon 5570, 1TB hard drive.
I did a fresh install (upgrade) and the moment I got the desktop up and idle, I tried to put the computer to sleep. It did, then 5 seconds later, on it came again.
Event viewer says "wake source unknown".
I have updated all drivers from asus, and installed all windows updates. No difference.
I have used every tool POWERCFG gives, it's report is clean, there are no wake requests, all devices (mouse keyboard) have had their wake ability disabled, I have even disable ALL devices in bios, booted without a keyboard and mouse and still, it wakes as soon as it's put to sleep. Even with all on board devices disabled except for sata.
Wake source: unknown.
I boot into Win 7 from another hard drive, no issues.
One thing to note is that from a fresh restart, if i put it to sleep, it stays asleep. Once waked, it will never sleep again. Restart the system, leave for idle for ages, hit the power button; it goes to sleep and stays. After waking, it never stays asleep again.
I have tried safe mode. no difference.
I have disabled all services. I have changed all the power settings to disable wake timers and to allow sleep during sharing. Still no difference.
What's up with my Asus Z8P68-V Pro that disagrees with windows 8? All my other machines have no issue.
I have no choice but to keep using Win7 at the moment, I can't have a computer that doesn't sleep.
I'm having the same problem with my Acer w500 which uses mSATA SSD drives only. I have upgraded to a Mushkin Atlas 120GB V series SSD and obviously upgraded to Windows 8 (professional) and every time it wakes from sleep it says there was a problem and needs to reboot. I'm going to put the stock 32GB Sandisk SSD back in later today and see if the problem is still present. I do have the latest BIOS on this computer and the latest firmware on the Mushkin SSD, drivers are the latest from Acer and most are November 2012 dates. There are no BIOS settings on this computer, all I really get are boot order, AHCI or IDE mode, and a couple other trivial things so I can't change suspend to ram or suspend to disk settings. I'll make the changes to hopefully show the BSOD when it comes out of sleep so I can try to gather more info.
This was a "clean" upgrade install (do not keep any settings or applications) which puts all the old stuff in a .old file, it was a clean from restore disk win7 that was used as the base OS to allow an upgrade, and is the 32 bit version of Windows 8.
Recently, I got a new graphics card for my computer (the card was Galaxy NVIDA GEForce 620). Well, after install some things changed that I do not like:
I can no longer sleep my computer. The #1 thing I liked about Windows 8 was getting to sleep the computer/ wake it up real fast. After I put this card in, the only options I get are Reboot and Shutdown. (And I even had to turn fast startup off, because when I start the computer up with it on, my USB's loose their functionality).
So, I have a computer I built myself specs being: AMD FX-8350, Gigabyte 990FXA-UD3, AMD Raedon 7900 HD Series, 4x4GB 1600MHz, and Windows 8. I don't feel as though listing the other parts are necessary. Anyways, my problem is that whenever I leave my computer idle it goes to sleep. Only problem is, if it's for a long amount of time I can't wake it back up. I have to not only turn off the computer, but instead unplug it and plug it back into the power.
The Troubleshoot icon that should be under the 'Advanced Startup' Option is missing. System is a new Dell Latitude 10 ST2 Tablet running Windows 8. Have access to 9 other identical tablets, all configured the same and they all have the Troubleshoot Option. Have tried multiple methods of getting to "Advanced Startup" display (including Safe mode, 'shutdown /r /o', etc.), but all result in only having the 'Continue', 'Use a Device', and 'Turn Off your PC' options - No Troubleshoot. Other than missing this icon, system is working fine. Shy of wiping the disk and starting over.
When I leave my computer after a session, it automatically goes into sleep mode after a period of time and remains that way till I wake it up.
However when I manually put it to sleep ( via shutdown options) , it goes to sleep immediately but for only a while ( a few minutes) then it shows the desktop screen again. If I then leave it alone after it self awake , it goes back to sleep as described above.
I was wondering if it's possible to take windows 7 from my first computer and install it to my new one that has windows 8 on it (windows 8 has problems with its wifi where windows 7 worked perfectly).
Why I don't have a setting for personalization? I am activated and running a pro edition of Windows 8.1 [URL] .... When I goto main pc info next to my "your copy of windows is activated" is a terms button which gives me [URL] .....
Your use of this software is subject to the terms and conditions of the license agreement by which you acquired this software. If you are a volume license customer, use of this software is subject to your volume license agreement. You may not use this software if you have not validly acquired a license for the software from Microsoft or its licensed distributors. EULAID:WinBlue_R8_1_ED_PS_V_en-us
I have hp notebook with windows 8 OS. When I plugged in the charger the display totally disappears and the screen has black for only 1, 2 seconds. And the same situation is when i removed the charger. But this is not happened when i was using windows 7. Is this a problem or a feature of windows 8.
