Computer Will Not Sleep Past First Time After Boot
Jun 29, 2014
I have a custom built computer running Windows 8.1 64-bit. Recently, it stopped going to sleep on it's own (except the first time that the power plan is followed after boot). Otherwise, the monitor goes to sleep and that is it. After a bunch of other attempts and fixes, I have found that there is a driver that is blatantly disregarding powercfg settings (as seen here: [URL] .....). This has been going on for over a week. I have run sfc /scannow, and dism /online /cleanup-image /restorehealth with no luck.
I'll start my computer, it will post and go into the BIOS just fine, it will always get past the screen right after the bios (with the motherboard logo and the windows spinning dots) and then it will go to a blank screen of blackness. It's had this problem off and on for a while, and I put in a new power supply about 2 weeks ago and it fixed the problem but now it will only boot into safe mode.
It has no problems in safe mode and I have not seen it BSOD once.
This has been happening for a couple of months now, and it used to be sporadic on the old power supply, but then it always happened, and now it seems to be happening all of the time now as well. Oddly, if I were to disconnect the ethernet cable it seemed to boot up better on the old power supply, but it doesn't matter what I disconnect now, it doesn't seem to want to boot up past the spinning logo thing before you actually get into any kind of windows 8.
The display and the sleep feature timers do not work. I just did a complete restore to try and correct this problem and another problem, which was no restore points and no ability to create one. The restore points are working for now, I mean that I was able to create a restore point. The display and sleep timer, not so, still a problem.
I've had this desktop Windows 8 computer since November and honestly I don't know if this has been a problem the whole time or not. Definitely, not the display, I know it has worked, but the sleep timer I'm not sure. I set the timer and just assume it sleeps and then goes into hibernation after a certain amount of time. With all the refreshing and restoring and changing over to this computer, I've not been paying much attention to the sound of the fan or the missing orange color on the power button (not visible, on the side of the computer).
I've set the timer through the Power Options feature in the Control Panel to 10 minutes for the sleep and to turn off the display to 3 minutes. Neither of them respond after set times. The computer is still wide awake and the display is not gone.
I have also gone to the "Change Advance Power Settings" menu box and turned off the hybrid sleep, which didn't work, and the Multimedia Settings in this menu box to turn on the setting "Allow The Computer To Sleep". Neither of these fixes did anything.
How can the computer not respond to something so basic and fundamental to its design?
Lastly, I'm wondering how this idea of powering down works at all. What I would like is for the computer to sleep after 20 minutes and then go into hibernation after 45 minutes. This would be when I'm done for the day. I have set the hibernation time in the "Change Advance Power Settings" menu box, but of course that does not respond either.
I'm having the same problem with my Acer w500 which uses mSATA SSD drives only. I have upgraded to a Mushkin Atlas 120GB V series SSD and obviously upgraded to Windows 8 (professional) and every time it wakes from sleep it says there was a problem and needs to reboot. I'm going to put the stock 32GB Sandisk SSD back in later today and see if the problem is still present. I do have the latest BIOS on this computer and the latest firmware on the Mushkin SSD, drivers are the latest from Acer and most are November 2012 dates. There are no BIOS settings on this computer, all I really get are boot order, AHCI or IDE mode, and a couple other trivial things so I can't change suspend to ram or suspend to disk settings. I'll make the changes to hopefully show the BSOD when it comes out of sleep so I can try to gather more info.
This was a "clean" upgrade install (do not keep any settings or applications) which puts all the old stuff in a .old file, it was a clean from restore disk win7 that was used as the base OS to allow an upgrade, and is the 32 bit version of Windows 8.
I build computers for people. And after I install Windows 8.1 I want to install the drivers and set it to run first time boot again so my customers can customize it. I could do it on XP.
My Dell XPS8700 is like a 16 year old, friendly one minute and totally nuts the next for no reason at all! The computer DOES boot, but there's no beep and well...
I tried updating to Windows 8.1 Update 1 and in didn't go through properly (it hard froze and crashed) and now won't boot past the BIOS. I cannot get into Windows and I cannot get into the Recovery Menu.
I tried recovery USB's and any I create either from a 3rd party or Windows itself results in loading to a black screen with a mouse cursor. Only one worked, Acronis (probably because its Linux) and it showed all the drives ruling out a hardware issue but sadly it cannot repair Windows.
So it seems I might be a victim of the black screen issue some had when moving to Update 1.... BUT the difference is I cannot boot into the recovery menu at all and any recovery media boots to a black screen.
How to get out of this screen and actually boot into anything which will allow me to try to fix the MBR or go back to a restore point.
I thought the point of recovery software was that it loads no matter how corrupted Windows is... obviously not! Something is stopping all of them booting properly.
I recently noticed this strange behavior in my pc. When I restart my computer, cpu usage will stay around 20%, and fluctuate the usage of my processes (system host and firefox being the big hitters) to maintain this general figure. Upon putting my computer to sleep and reawakening, the symptoms are the same, except the usage hovers around 40%. This will continue until usage hovers around 99-100%.
I also just noticed that your TSG SysInfo (included below) says i have windows defender disabled, but I have been under the assumption that it is enabled. It has been since i uninstalled AVG as this was once a heavy hitter in my processes and I thought a cause to some of this.
Before this I didn't think this was a virus, because I've run multiple malware searches including malwarebytes in and outside of safemode but now I'm not so sure.
Also most likely related, my pc takes (literal) hours to shut down.
OS Version: Microsoft Windows 8.1, 64 bit Processor: Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz, Intel64 Family 6 Model 60 Stepping 3 Processor Count: 8 RAM: 16178 Mb Graphics Card: NVIDIA GeForce GT 750M, -2048 Mb Hard Drives: C: Total - 905049 MB, Free - 561457 MB; D: Total - 25599 MB, Free - 22620 MB; Motherboard: LENOVO, 20217 Antivirus: Windows Defender, Disabled
I started to notice a change with the clock every now and then. I finally concluded that the clock does not change during sleep, restart, or shutdown.
My computer goes to sleep often, and when it wakes up from sleep, the time is the same as when it was prior to sleeping, not synchronizing to the correct time after waking up.
I've done some research and I fell onto the official Windows thread where they explained the use of third-party-utility will cause this problem.
The big problem here is that I don't have the single clue which ones. I tried uninstalling some, not sure if I left any utilities out. The utilities I've used are the general ones for visual styles and themes.
Running a family PC, with different user login's. Users is leaving the PC even sometimes after logoff not putting the PC to sleep or switching on the PC, do not log in and leaves the PC running. (training of users, no result).
Task: Ensure the PC goes to sleep within reasonable time.
Sleep settings does not seem to work after user logoff. (3 different login profiles) all set to same standard "balanced" scheme. The standard scheme is changed/set to HDD off 20min, sleep 20 min, hibernate 240min.
A small app is called by screen saver logs the user off after 15 min inactivity with a 1 min warning screen. All working fine with logoff etc.
I had hoped the adjusted standard settings "balanced" was cascaded to the "logoff" state, but it seems to run it's own life after logoff, meaning the PC keeps running (screen goes black as set in the "standard scheme) however the power settings is not putting it to sleep, it takes hours...
The Ethernet card "hard wire" is set to not wake, the wireless adapter is disabled, lock screen is disabled.
Have also tried in the registry to set all default user schemes to = 5 (this was working in XP after logoff) but seems to have no effect in Windows 8. I'm not having Windows 8 pro, so GPO is not an option.
Here comes the questions: Case, after logoff I want the PC to sleep after 20 min. Where is the settings for "logoff" state (i.e. no user logged in and after user logoff) in the registry How to changed the setting in the registry, meaning Dword, name, value for 20 min to sleep
Thought this was problem - Microsoft writes "When you resume a computer from sleep or from hibernation, the SATA hard disk drivers require the SATA hard disks to be ready within 10 seconds. However, a large SATA hard disk may take longer than 10 seconds to be ready. In this situation, the resume operation times out." in their fix for W7 - You receive various Stop error messages in Windows 7 or in Windows Server 2008 R2 when you try to resume a computer that has a large SATA hard disk
Have tried a variety of things like checking all current drivers, turning off hybrid sleep, power troubleshooter, windows update and the like on instruction but my ASUS p7p55d-e doesn't seem to have any Windows 8 specific drivers.
boot drive C: (partitioned into two logical drives)
I have had to do a complete reset of my computer recently and ever since I did that I have not had the option of putting my computer to sleep even after checking all my drivers to see if they are up to date. I am also having a problem where when I turn on my computer It will stay a black screen even though all signs point to it working just nothing shows on the screen. After a complete shutdown by holding the power button and turning it back on it works but doesn't let me get into BIOS.
My laptop won't go to sleep when It's plugged in for some reason, though if I take out the power cable it will sleep. If I have the power cable out, send it to sleep then plug the power cable in this doesn't wake it up.
I've gone into the power option's but I'm not too sure what I can really change to make it work.
I've changed the multimedia setting's to allow the computer to sleep.
I've tried the different power plans - same behaviour.
my PC running Win 8/IE10 . At random times during the day, I lose the Hard Drive/ DVDDrive Icons in the "My Computer" and all icons in Control Panel . On both pages I just get a blank screen with "Empty Folder" message, and a blue "Search Bar" at the top. Also, when the fault occurs, I lose all the Thumbnail Icon pictures of my Photographs, leaving justa white square with the name of the photograph beneath.
If I double click on the white square, the photograph appears normally jn Windows photo viewer.
Rebooting returns the PC to normal for a couple of hours maybe, but eventually the fault will reappear.
I have run Kaspersky AntiVirus, MS Disk and Registry , but all report "No Problems". Tried to run scan now but keep getting 'try as administrator' when I am the administrator ?
The description for Event ID 0 from source amdacpusrsvc cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
The description for Event ID 0 from source amdacpusrsvc cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
amdacpusrsvc acpusrsvc: GraphicsMemory API Wrapper: Dummy Packet Submission FAILED
And now the information message Note i never put my computer to sleep.
The system has returned from a low power state.
Sleep Time: 2014-08-25T22:39:55.069952300Z Wake Time: 2014-08-25T22:40:21.165214600Z Wake Source: Unknown
For reasons I can't explain, the time on my computer keeps randomly jumping forward, usually several times a day, in 10-30 minute increments. I go in and re-sync it to the internet time servers each time I notice, but it just changes randomly again a little bit later. The time.windows.com server usually returns the message "An error occurred while Windows was synchronizing with time.windows.com. This operation returned because the timeout period expired.", the other servers sometimes the same, sometimes no problem. The other computers on my network don't seem to have any problems.
I just got a new Win 8 computer. I love it, however it wakes from sleep mode every 15 minutes on the dot. It will wake for about 2 minutes than sleep again.
Is this something it should do in order to get some air flow every once in a while or can I stop it from doing this? I have searched around online and tried everything i have come across. I turned off the setting that allows programs to wake the computer, as well as made sure the ethernet connection doesn't wake it.
Every few days my computer will BSOD when waking from sleep. The screen will display this message as the error "DRIVER_IRQL_NOT_LESS_OR_EQUAL cmudaxp.sys". Also sometimes the system will crash during sleep but no mini dump will be created. I have looked at the minidumps that were created and the only thing its pointed to were the cmudaxp.sys driver, hal.dll and ntoskrnl.exe. I tried reinstalling the 8.1.8.1822 drivers for the soundcard but that did not solve the problem. Today i reverted back to older drivers 8.0.8.1821 and will see if this fixes it. .dmp files included in attachment.
My laptop computer is the only computer has 2 NIC and thus I have set it up so that no other computers on my network can reach the network storage. I will be changing how things are wired together so that the network storage will now be connected through the Wi-Fi router, however I want to maintain the security of not allowing other computers on my network from reaching the network storage.
Is there a way that I can do this? Can I put the network storage computer on a different workgroup from the other computers? Can I have my laptop see 2 work groups so that it can see both the network storage and my home (unrestricted) LAN?
I am running windows 8 (not 8.1) x64 on all my computers. My router is a Linsys E4200.
I've noticed that when I leave my pc for some time and the screen savers come on, then the screens go blank (my machine doesn't sleep or hibernate) when I use the pc again I can see that during the time the monitors had turned off, the CPU usage was at or above 50% ? When I use the computer after that, watching movies, photoshop etc the cpu usage is much less than that!
RunDLL Error every time i start up my computer. Im running on windows 8.1 pro. Its a box And it says "There was a problem starting P17RunE.dll The specified module could not be found."
I have Windows 8.1 Pro 64 bit activated using kmspico. For some reason, every time I wake up my computer, it disconnects it from the Wifi and when I try reconnecting it, it won't reconnect, then I had to restart my computer to connect it again successfully. This never happened on the computer's previous Os's.
I took my computer to a computer repairs to get my fan fixed and when I got it back I found that my computer kept crashing when waking from sleep. It happens every time and is inconvenient as it just resets. It also takes longer to turn on, it has a black screen for a short amount of time, it was not like this before, I can put up with the added turning on time but I need to be able to sleep and wake my laptop without issues.
After updating from Windows 8 to Windows 8.1 my PC doesn't seem to want to sleep.
I've done some googling and cant really find anything. I found a command prompt thing I should do. I did that and it said nothing was keeping my computer awake.
I would like to automatically create a restore point everytime I shut my computer down. I have had no success with TASK SCHEDULER (which could easily mean I'm doing something wrong). Heard of/ Use any 3rd party software for this?
