RunDLL Error every time i start up my computer. Im running on windows 8.1 pro. Its a box And it says "There was a problem starting P17RunE.dll The specified module could not be found."
View 2 RepliesEvery time I boot up Windows 8.1 I get a RunDDL error. Now I have done some research to see what is causing all this , and apparently I had a malware on my computer , so the reason this error keeps popping out is because it's looking for the file that has been removed. Now my question to you is how can this be fixed. I have an image provided below with the error message.
UPDATE : I was able to solve it all I had to do was the following steps:
1.)Download CCleaner
2.) Run Cleaner
3.) Go To Tools > Start Up > Remove The File.
I'm getting this message since my most recent update on Windows 8.
RunDLL error"The specified module could not be found."
My iPhone and iPod devices are also not appearing in iTunes when connected to my computer.
The description for Event ID 0 from source amdacpusrsvc cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
amdacpusrsvc
[EVENT]: SERVICE_CONTROL_POWEREVENT: RESUME: FAILED.
The description for Event ID 0 from source amdacpusrsvc cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
amdacpusrsvc
acpusrsvc: GraphicsMemory API Wrapper: Dummy Packet Submission FAILED
And now the information message Note i never put my computer to sleep.
The system has returned from a low power state.
Sleep Time: 2014-08-25T22:39:55.069952300Z
Wake Time: 2014-08-25T22:40:21.165214600Z
Wake Source: Unknown
It started doing this today.
i installed fresh windows 8.1 x64 bit
since installation every time when i start my pc , then usually motherboard picture displayed then my pc restart auto and then my pc start normally sometimes it shows BSOD ,
" Your PC ran into some problem & crashed . We are collecting information
To illustrate this point I realised I'd uploaded and incomplete zip file so here's another one!
My error messages following a re-start are:
C:windowsminidump101913-26769-01.dmp and
C:usersalanaappdatalocal empwbr-873667-0.sysdata.xml
While trying to add folders to the Search Index, I was informed the Windows Search process was not started. When I go to the Services Console and attempt to manually start, I am given the error:
"Windows could not start the Windows Search service on Local Computer.
Error 2: The system cannot find the file specified."
So I opened an command prompt with administrative level access to run sfc and received the following error after it was complete:
"Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.Log windirLogsCBSCBS.log. For example C:WindowsLogsCBSCBS.log. Note that logging is currently not supported in offline servicing scenarios."
The CBS.log file is too large to upload to here or paste into pastebin, so here is a dropbox upload of it:
What other way, aside from a repair install, do I have to fix my missing files and services?
Specs:
Processor: Intel i5 2500k @ 3.3GHz
OS Name: Microsoft Windows 8.1 Preview with Media Center
Motherboard: Z68A-D3H-83
Installed Physical Memory: 8.00GB
Last night my laptop (lenovo z400 ideapad, running windows 8 - i never updated to 8.1) went to a blue screen with a "kernel data inpage error" message. Tried to boot it back up, but once i entered my password and logged in, the screen looked wrong. The windows homepage had no apps and the background pattern was not the one i normally had. I couldn't click on anything, so i shut it back down and went to sleep. This morning, i turned it back on, and this time it looked normal when i logged in. However, after about a minute, it froze and would not unfreeze. Thats where i am now. I can open the computer in safe mode and it works fine, and through that i can access the event viewer and command prompt, etc. I did a disc repair, no luck, and a system restore failed. Like i said, computer only works in safe mode, so i dont know if I'll be able to do the right procedure to upload the dump file from the BSOD, but i can try. Lots of interesting things in the event viewer. I'm on my phone but i can sample them later.
View 5 Replies View RelatedA few days ago my comp randomly crashed while I was playing a game. It gave an error "KMODE_EXCEPTION_NOT_HANDLED (NETwew00.sys)".
Every time I turn my laptop on it gives me that error, but I can use it find in safe mode. Also found out, my comp crashes when ever i connect to any wifi.
I have an alienware m14x R2 Windows 8
You see his laptop is in a constant rebooting session it keeps trying to reboot and reboot and reboot. And gives me that error message above. I CANT NOT, I REPEAT CANNOT GET TO THE OS SYSTEM meaning that i cant get to the start menu or anything like that. Also when i tried to select automatic repair it tries to load it then gives me the same error above. The Computer my friend has is a HP Spectre XT running windows 8 64 bit. Also the only thing, I could get to is the boot menu which has the OS boot manager which keeps rebooting and stuff. Then select a EFI file from the hard disk drive.
View 1 Replies View RelatedI recently re installed Windows 8 then upgraded to Windows 8.1 because I was having BSOD. Now on the fresh install, which is 4 days or so old, my computer BSOD on start up like before.
My guess hardware failure or Norton....
I am getting BSOD most of the time when my computer starts up, also a few times when I'm browsing websites. The first few times it happened I did not notice the file name that causes it.
The files that I noticed which causes the BSOD:
DPC_WATCHDOG_VOLIATION
MULTIPLE_IRP_COMPLETE_REQUESTS
What I did that causes this mentioned file to prompt BSOD. I have attached a zip file achieved by the diagnostic tool from this website as told.
Computer: HP Pavilion DM4 3070-se (Beats Edition)
OS: Windows 8
It would not boot up, and when I started it the BIOS showed a '3F0 hard drive not exist' error. I left it until this morning, and tried again. Everything booted up and it reached the Windows 8 login screen -- I have automatic login enabled, but the screen freezes (spinner indicator stops suddenly) and the screen goes black. It restarts again, and sometimes I get the Windows 8 repair screen, sometimes I get the 3F0 error again.
The inconsistency makes me think that something is screwed up hardware-wise, but I'm not totally sure. Apparently, from reading online, the problem could be the HDD (I don't think this is the case) or a poor cable connection (most likely), or a software problem.
Because I don't have recovery media for Windows 8 (I installed it on a USB drive I don't have with me) I can't try a system refresh or restore, but I'd rather avoid those if at all possible.
Do you all think that a good option might be to take it to a hardware repair place and have them check the cables for errors?
Every time i formatted my pc,then after sometime it gives a bsod error & restart then pc cant start then windows start screen loading & loading......
I updated all driver & ssd firmware but no result.
I collect dmp files & collect some data.
Stop code 0x00000133.
Related driver show hal.dll +546a
Due to restart i didn't collect so many.
I will update dmp file information shortly.
I have Windows 8 64 bit installed on a new Hp h8 1360t . On each restart I get this error.
"PKU2u log failed to start with the following error: 0xc0000035".
The results of my searches to resolve this error has been minimal to say the least.I have run sfc/scannow and a chkdsk /r with no positive results. how to correct .
My windows 8 laptop (studio 1537-DELL) crashes several times and I have this error displayed on start up:
C:Windowsminidump21514-20498-01.dmp
C:UsersuserAppDataLocalTempWER-72025-0.sysdata.xml
C:WindowsMEMORY.DMP
My SF_DD_MM_YYYY.zip folder is uploaded.
I get this RunDLL (Not Responding) message box every time I restart the computer. The rest of the message says "There was a problem starting C:UsersSHERRYAppDataLocalConduitBackgroundContainerBackground Container.dll The specified module could not be found." I have included a snip .png of the message box.
I will attach this information as a .pdf file, if interested. The files instructed to be deleted in the 'regedit' would not delete at all. And I still don't know if I was intended to delete the the entire folder with sub-folders, but since they couldn't be deleted it doesn't matter. These folders and the files listed in them did not seem to have anything to do with Conduit Ltd. A couple of these 'Regedit' folders were not even listed.
I build computers for people. And after I install Windows 8.1 I want to install the drivers and set it to run first time boot again so my customers can customize it. I could do it on XP.
View 3 Replies View RelatedI have a custom built computer running Windows 8.1 64-bit. Recently, it stopped going to sleep on it's own (except the first time that the power plan is followed after boot). Otherwise, the monitor goes to sleep and that is it. After a bunch of other attempts and fixes, I have found that there is a driver that is blatantly disregarding powercfg settings (as seen here: [URL] .....). This has been going on for over a week. I have run sfc /scannow, and dism /online /cleanup-image /restorehealth with no luck.
View 2 Replies View Relatedmy PC running Win 8/IE10 . At random times during the day, I lose the Hard Drive/ DVDDrive Icons in the "My Computer" and all icons in Control Panel . On both pages I just get a blank screen with "Empty Folder" message, and a blue "Search Bar" at the top. Also, when the fault occurs, I lose all the Thumbnail Icon pictures of my Photographs, leaving justa white square with the name of the photograph beneath.
If I double click on the white square, the photograph appears normally jn Windows photo viewer.
Rebooting returns the PC to normal for a couple of hours maybe, but eventually the fault will reappear.
I have run Kaspersky AntiVirus, MS Disk and Registry , but all report "No Problems". Tried to run scan now but keep getting 'try as administrator' when I am the administrator ?
Windows 8 Pro x64.
For reasons I can't explain, the time on my computer keeps randomly jumping forward, usually several times a day, in 10-30 minute increments. I go in and re-sync it to the internet time servers each time I notice, but it just changes randomly again a little bit later. The time.windows.com server usually returns the message "An error occurred while Windows was synchronizing with time.windows.com. This operation returned because the timeout period expired.", the other servers sometimes the same, sometimes no problem. The other computers on my network don't seem to have any problems.
How can I stop this happening?
My Dell XPS8700 is like a 16 year old, friendly one minute and totally nuts the next for no reason at all! The computer DOES boot, but there's no beep and well...
View 9 Replies View RelatedThe display and the sleep feature timers do not work. I just did a complete restore to try and correct this problem and another problem, which was no restore points and no ability to create one. The restore points are working for now, I mean that I was able to create a restore point. The display and sleep timer, not so, still a problem.
I've had this desktop Windows 8 computer since November and honestly I don't know if this has been a problem the whole time or not. Definitely, not the display, I know it has worked, but the sleep timer I'm not sure. I set the timer and just assume it sleeps and then goes into hibernation after a certain amount of time. With all the refreshing and restoring and changing over to this computer, I've not been paying much attention to the sound of the fan or the missing orange color on the power button (not visible, on the side of the computer).
I've set the timer through the Power Options feature in the Control Panel to 10 minutes for the sleep and to turn off the display to 3 minutes. Neither of them respond after set times. The computer is still wide awake and the display is not gone.
I have also gone to the "Change Advance Power Settings" menu box and turned off the hybrid sleep, which didn't work, and the Multimedia Settings in this menu box to turn on the setting "Allow The Computer To Sleep". Neither of these fixes did anything.
How can the computer not respond to something so basic and fundamental to its design?
Lastly, I'm wondering how this idea of powering down works at all. What I would like is for the computer to sleep after 20 minutes and then go into hibernation after 45 minutes. This would be when I'm done for the day. I have set the hibernation time in the "Change Advance Power Settings" menu box, but of course that does not respond either.
Currently I have a home network and need to do some rewiring but wanted to know if a software solution exists.
Right now I have the following setup
Code: +------+ +--------------+ +--------------------+ |Modem|----------->|Wi-Fi Router |+-------->|Desktop Computer| +------+ +--------------+ +--------------------+ + + | | | | +------+ | +-------------->|Server| v +------+ +----------------+ |Laptop Computer| (wifi atapter is OFF) +----------------+ + | v +---------------+ |Network Storage| (security storage computer NAS200) +---------------+
My laptop computer is the only computer has 2 NIC and thus I have set it up so that no other computers on my network can reach the network storage. I will be changing how things are wired together so that the network storage will now be connected through the Wi-Fi router, however I want to maintain the security of not allowing other computers on my network from reaching the network storage.
Is there a way that I can do this? Can I put the network storage computer on a different workgroup from the other computers? Can I have my laptop see 2 work groups so that it can see both the network storage and my home (unrestricted) LAN?
I am running windows 8 (not 8.1) x64 on all my computers. My router is a Linsys E4200.
I've noticed that when I leave my pc for some time and the screen savers come on, then the screens go blank (my machine doesn't sleep or hibernate) when I use the pc again I can see that during the time the monitors had turned off, the CPU usage was at or above 50% ? When I use the computer after that, watching movies, photoshop etc the cpu usage is much less than that!
View 1 Replies View RelatedI have Windows 8.1 Pro 64 bit activated using kmspico. For some reason, every time I wake up my computer, it disconnects it from the Wifi and when I try reconnecting it, it won't reconnect, then I had to restart my computer to connect it again successfully. This never happened on the computer's previous Os's.
View 5 Replies View RelatedI'm having the same problem with my Acer w500 which uses mSATA SSD drives only. I have upgraded to a Mushkin Atlas 120GB V series SSD and obviously upgraded to Windows 8 (professional) and every time it wakes from sleep it says there was a problem and needs to reboot. I'm going to put the stock 32GB Sandisk SSD back in later today and see if the problem is still present. I do have the latest BIOS on this computer and the latest firmware on the Mushkin SSD, drivers are the latest from Acer and most are November 2012 dates. There are no BIOS settings on this computer, all I really get are boot order, AHCI or IDE mode, and a couple other trivial things so I can't change suspend to ram or suspend to disk settings. I'll make the changes to hopefully show the BSOD when it comes out of sleep so I can try to gather more info.
This was a "clean" upgrade install (do not keep any settings or applications) which puts all the old stuff in a .old file, it was a clean from restore disk win7 that was used as the base OS to allow an upgrade, and is the 32 bit version of Windows 8.
I would like to automatically create a restore point everytime I shut my computer down. I have had no success with TASK SCHEDULER (which could easily mean I'm doing something wrong). Heard of/ Use any 3rd party software for this?
View 3 Replies View RelatedShortly after I pressed the Power button for the first time on my brand new Windows 8 laptop, I was brought to the screen where I set my time zone. I changed the default - Pacific Time - to my time zone - Eastern Time - and continued setting up my computer. Not long after, I realized that the time shown on my computer was wrong, and when I checked I discovered that the time zone had reverted to Pacific Time.
The problem is: I cannot change the time zone! (Yes, I am an Administrator.) Whether I do it from the Start Screen or the desktop, the time zone always reverts to Pacific Time. I even tried running tzutil from an elevated command prompt - the time zone will not change.
How can I change the time zone to Eastern Time? (I have plain Windows 8, not the Pro version.)
Before I upgraded to windows 8.1 my start up time was fairly quick about 20 seconds, now I find after I have upgraded to 8.1 my start up time is over one minute.
View 8 Replies View RelatedI was messing around with the Win 8.1 preview in a VM tonight and noticed that you can have the Desktop Mode opened half screen along with Modern UI apps on the other half of the screen. I haven't heard about this capability, only 2 Modern UI apps sharing the screen at any one time.
[URL] .....