I am having this problem and I just got a new laptop with windows 8.1 and its been working well until i got ESET NOD32 antivirus installed and i got photoshop cs4 installed too
Its super hard to type and do almost anything! videos minimize themselves and im hating it! i ran malware, spybot, scannow and theres nothing except some problems in spybot but i got it fixed but nothing its not back to normal!
When I turn on my computer, I get to the login screen, click in the field and type in my password. When the login completes, my cursor disappears. I can still see it highlighting things I mouse-over, I can click on things and right click and do everything normally except for the fact that I cannot actually see the cursor. If I Ctrl Alt Del, the mouse is again visible, but as soon as I got back to to desktop or start screen, the cursor goes invisible again. I have tried messing with the mouse trails and enlarging the cursor, selecting a different cursor, re installing drivers and system restore however, system restore was not successful.
When I try to do a system restore, it says that windows is missing files but that I may insert my installation disk to recover these files. Upon doing so, it says my disk in invalid. The disk is in perfect condition and is the exact disk I used to install windows in the first place. At this point the mouse is still invisible. I then went to My Computer and ran the disk from there. Out of nowhere, the cursor appears and everything seems to be normal. After turning the computer off and back on however, the cursor again disappears until I run my windows installation disk. I've tried this 3 times now and every time inserting the disk causes the cursor to reappear. My theory (which may be wildly incorrect) is that when running the installation disk, it loads the proper files into the RAM which allows my cursor to be visible. As soon as the computer looses power, those files are gone and thus the cursor is no longer visible. This makes sense, (at least to me) except for the fact that the cursor is visible on both the login screen and in the Ctrl Alt Del screen.
My PC: Windows 8.1 Gigabyte 970A-DS3 Corsair Vengeance LP 2 x 4GB Corsair TX 550M Evga GTX 550Ti 2GB
I just installed a clean install of Windows 8.1 Preview Pro on my laptop (HP DV9000) and I've been coming back and forth to the forum and getting my questions answered by reading all the post about my problems and it worked. I've come across one problem that's frustration to say the least and it's really annoying.
Now that when I reboot my laptop it boots just fine and now the blank black screen comes on with just the cursor present. I've waited and even rebooted a few times and it's still the same.
I recently upgraded to windows 8.1 from windows 7. Installation went fine and first time I loaded into windows perfectly. I only installed the following: killer enthernet driver and google chrome (also nobodies graphics driver)I reset my computer and it goes through the logo then goes into a blank blue screen where I can move my cursor.What I've tried: I can log into safe mode. Right now I am resetting the PC (file wipe). I can't seem to attach an image on mobile.
I have a Gateway laptop with windows 8...it shut itself down and restored...it has done this before with no issues. The computer loaded and is at the start page where all the apps are listed. I cannot use the cursor...it doesn't show up. When it goes to sleep usually I can hit the space bar and it responds..but nothing...seem the whole key board is frozen. I have tried the function keys for the cursor and nothing...I have taken my mouse from my other computer to try to use it in the lap top and nothing...I have turned the computer off and on..still nothing.
I use my laptop for work and I am frustrated now that I can't get in to it. It seems locked somehow or stuck. When I hit F1 it does open the desktop page and I see the box appear but I can't click on it. The only way to wake the computer up to see the screen I unplug or replug the power cord in. Other than that it seems to go back to sleep.
My laptop has been acting really weird the last couple of weeks. It would crash randomly, and sometimes when I picked it up to put it somewhere else, it crashed too.
Now, I thought this was a problem with Windows 8.1, because it didn't behave like this before with normal Windows 8. So I Refreshed my laptop, and after that it worked again, without crashing.
I left it in sleep mode while I got some sleep too, and when I booted it up this morning, it crashed again.
After that the whole laptop wouldn't boot up, and now the only thing that shows is a cursor on a black screen, and it seems to be stuck in sleep mode, because I can't even turn it off completely manually. So I can't access the BIOS or make it boot up in Safe Mode.What the hell should I do?
Toshiba Sattelite L50-A-15U
Windows 8 64-bit
Intel i7 4th generation processor with Intel HD4600 graphics card
Sometimes when I am playing a game in fullscreen with the 360 controller, the mouse cursor will appear on the screen where I last left it. I have to jiggle the mouse and it will go away, but it comes back periodically. In games where I am using a mouse with a special look during the game, I can see flickers of the regular white windows mouse cursor. At first I thought it was just happening in Steam Big Picture Mode, but it is happening in all games.
I've got a problem with my cursor disappearing when I switch from one Windows account to another. The older account got set up this past Christmas when I got the computer and the newer one got set up a couple of weeks ago. I had no problem with either account until today: now, suddenly, I'm finding that when I switch to the newer account, the cursor just flat-out disappears and doesn't come back for love or money. This leaves me unable to do very much of anything except switch back to the older account, where my cursor usually reappears. But as soon as I go back to the newer account, I've lost the cursor and can't make it come back.
For months now, I've been frustrated by the apparent oversensivity of the gesture interpretation on the touchpad. I innocently move a finger along the touchpad to get it from A to B and find that it gets interpreted as a wish to scroll or bring up a context menu or whatever. So yesterday, I disabled all but the single-finger gestures. The problem seems to have begun right after that. After various reboots and other experiments to get my cursor back on the newer account, I finally decided to re-enable the gestures as they had been on the theory that perhaps that was causing my cursor problems.
Any way to keep my cursor from disappearing in the second Windows account? And if you know how to keep the touchpad from reacting to every minute movement and interpreting it is an attempted-gesture when it is just me moving my hand.
The laptop is an ASUS K55N, which was new at 2012.
After finishing a big job for a friend using Windows 8, I now have some questions that I would like to getting a better understanding of. If one is working with the tiles interface, is there any way after exiting a tile; of going back to the tile interface instead of the desktop?If there is, I appear not to have found it yet.
Next I have noticed that while typing on the Internet using any browser really, I have noticed sometimes the cursor jumps back to a position where I have already typed. Have not been able to find any info on this one.how to set up remote access for me network? Having never tried it before. Also need the same type of info for possibly setting up a vpn as I am starting to travel a lot and what is involved I doing so.
My windows 8 pc when booted, mostly freezes after i see my account picture with a circling dots. Then appears a black screen and just my cursors, but nothing else. I try to get task manager and run explorer.exe but it doesn't work. It has now been happening very much. I have installed the OS just a few days back and i got this issue. This also happens when i sign out/switch from my account to another account.
I shut down my computer last night. It runs 8.1 and when I shut it down I do not believe it installed updates.i tried to boot it. It boots and after I type in my PIN, shows my desktop for a few seconds. Then, my display will either turn black or a blueish grey. There is no cursor. It does this every reboot now. I can not do anything except reset when it happens.
Two GTX 760's in SLI Two Asus monitors
1 - I have Actual Multiple Monitors trial installed. The freezing/display blanking seems to happen when the trial time left window shows up, but that may be coincidence. 2 - I heard graphics card driver updates and windows updates can clash in some way and cause a similar issue. From what I've read, a cursor is still on screen and task manager can be opened with CTRL SHIFT ESC. Neither of these work for me. 3- Virus? I have avast so I doubt it.
I have had Windows 8 since it came out and a little while after I started having issues with it not waking up/randomly freezing. I reinstalled 8 and for a while I have not had any trouble but now I am having issues again.
Basically the computer randomly freezes... but not really. So certain things don't work like opening or closing applications but the cursor can still be moved. Eventually most things won't work but again the cursor is still moveable.
Then again tonight it happened when I got home from work. This is the same problem as before. My computer was left on and locked and when I returned the logon is missing but my cursor is there and moveable.
I have been trying to fix this since the last time it occurred and still cannot find why this is happening. I have the latest drivers, ran scans with Bitdefender and Malwarebytes, checked the event log but nothing shows up from the time I left to the time I got home. I've attached a picture showing the screen frozen with just the cursor and no username/password on the screen.
I just updated my Windows 8.1 when I restarted my PC. When I was going to login, it was just a black screen. If you are in the login screen, the selected language in the right left corner and the internet connection in the left corner. Both of those two signs are flickering in the corners. And my cursor is also flickering.
The Navigation Pane on the left side of Windows Explorer has six major categories from top to bottom as follows: Favorites, SkyDrive, Home Group, This PC, Libraries and Network. When I open Windows Explorer, the cursor is positioned on the Library Category. I would prefer the default cursor position to be on Favorites. I assume that there is no easy way to make this change, at least without editing the Registry somewhere.
Upgraded to Windows 8.1 Pro from 8 through the Windows Store. Everything seemed to go smoothly. Updated graphics card drivers prior to install of 8.1. Now whenever I start up, I can log in, but then it goes to a black screen with a cursor. Ctrl-Alt-Del will bring up the task manager and from there I can access programs and get on the internet. So after maybe 5 minutes or so after opening a program (usually firefox) the Metro screen randomly loads. None of the store apps worked, though I was able to find a fix for that. Some of them still don't work right though. Is there a better way to upgrade from 8 other than through the store?
I just purchased a laptop with Windows 8 installed on it. I have one problem. I know if you hit one of the corners of the screen the right toolbar becomes activated and is displayed. My problem is that it tends to be displayed when I move the cursor in the middle of the screen. When it is displayed I have to deactivate it in order to continue what I was doing. I do not mind the toolbar if it is not so sensitive.
Earlier today my Asus x551m laptop stopped working; the cursor arrow is still visible and movable, but nothing is clickable, ctrl-alt-delete does nothing, and this laptop does not have an easily removable battery that would allow for a hard reset. Also, when I hold the laptop up to my ear, it is completely silent as if it's not even running. It's been like this for almost 3 hours, and I'm hoping that it will be ok once the battery dies and I power it on again.
I have a problem in my dual boot machine. I decided to remove Linux mint 17 from my dual boot with windows 8. I used easeus partition manager to delete the partitions associated (root, home and swap). Then I got unallocated space just before my windows partition. So I moved my windows partition to the extreme left possible. Then I merged this unallocated space with my second storage partition.
These steps required reboot (specifically the moving of windows partition). When I rebooted my PC I got an error that grub was not found. I realized that I had forgot to fix MBR and load windows boot loader. So I used windows 7 recovery disk (yes windows 7 as I don't have windows8 recovery or installation disk). I got a windows 7 style boot loader instead of windows 8's graphical one which has advanced recovery options built in. But I proceeded. Then eases did its job with the partitions. After a reboot now I am stuck at a black screen after entering my password with a movable mose cursor. I can only press Ctrl+alt+del. Selecting task manager from it does nothing.
Since I don't have windows 8 disks and windows 8 boot loader I am not able to refresh or reset my PC. Neither can I shift restart my PC to get advanced boot options. One more thing to note, that while entering password, I noticed that the lock screen and account pictures have changed to defaults of a freshly installed windows.
Windows 8. My custom cursor, when i point to text or links the cursor changes from custom to a hand. Windows XP the cursor stayed as is the custom cursor. Is this normal for Windows 8 for the cursor to change like that, or can I change something??
I had this problem before where, when a pet rabbit (I admit that was a bad decision) would walk or sit on the computer or keyboard, not for a long time, and as the result the mousepad/cursor would stop working. Even a plugged in mouse wouldn't work. I had it repaired and the person who fixed it said it was a setting. Problem is, same rabbit same problem, and now my cursor does it again. I can turn it on and it will move and click, same with my guest account, but then after a while it'll freeze and not do a thing. Where's the setting?
One day i tried to start my computer. Once it started i booted up steam only to see that none of my games were installed. Hmm. So i opened up my computer and saw that one of my SATA cables came unplugged. After plugging it back in my computer did a system check on all of my hard drives. Once that was completed my computer restarted and went to the swirly windows logo and then to a black screen with a mouse pointer that i could move...that's it. I've tried a few things from looking it up like booting into safe mode, trying to log in with the black screen still up, taking out the video card and putting it back in and nothing, just goes to the black screen. I don't have a windows 8 disk so i can't attempt to fix it that way nor do i have my 8 key on hand. i built my desktop so its nowhere on my rig.
Can't move the cursor off the active screen to the top, right or bottom. But when I move the cursor to the left side, it goes forever.
I often do a split screen e.g. to look at two panels concurrently, you can go to the option between minimize & maximize (does this mode have a name???), move the panel to the right and you get a half-screen on the right. Do the same with another screen, move it to the left, and you again get a half-screen. Dunno what this feature is called, but it exists in Win7 & Windows 8, great for doing copy-and-paste from one to another.
Problem is, when I drag to the left, it goes off into space.
I recently started having the black screen with the flashing cursor come up sometimes when I start my PC. I have narrowed it down as being my 3rd HDD (2TB WD) as the culprit, which I only use as media storage. It is not set as a boot device since windows is on my SSD and when I unplug the drive from my mobo, windows always starts up without any issue.
Basically my question is, is this just a case of a hard drive going bad? I ran chkdsk on all 3 drives and none of them had any issues and it is not fragmented or anything that I can tell, so I don't know. I have had this setup for a while now and about a month ago it started doing this. The screen doesn't always come up however, so I have no clue what the issue is.
I am having trouble with moving my cursor. When ever I hold down any key, I cannot move my cursor around on the desktop, but I can move it if I hold down the CTRL key. I have a Synaptics PS/2 Port Touchpad and a Standard PS/2 Keyboard, & I have a Windows 8.1 HP Laptop. I also had a similar problem like this before, but instead of not being able to move my cursor, I was unable to click. However, I am able to click while typing, but cannot move the cursor. I am not sure when the problem occurred or how it happened.
I have my laptop running windows 8, and whenever i boot it up it just shows the "HP" logo and then the spinning dots on the bottom, then it just goes to a black screen with a cursor on it. Now I cant do anything with this, seeing as it is windows 8 I cant boot it into safe mode from startup. I have an HP Envy Laptop.
My MSI GE70 laptop with windows 8 64 has recently been having an issue while watching videos (whether it is a downloaded file or a stream) where the screen will suddenly go black and the sound will go away, but the cursor will still be visible with the spinning circle to show me it is working on something. It will just stay black and nothing will respond, even CTRL-ALT-DEL. The only way to fix it is to restart the computer by holding down the power button. It doesn't give me any error messages before this happens or on start up afterwards. It isn't overheating, and I didn't install any new drivers before this started.
I had to reinstall the whole machine from scratch because old HDD has been playing up. This is what I did:
1. Imaged old (faulty) drive to new one - just because I needed some data out of it and the old one was very slow and freezing. 2. run the system with new imaged drive - all working except sometimes it was playing up, so I decided to upgrade to another drive with Windows 8.1 from Win7 3. have plugged in new HDD to SATA0 port and the imaged drive to port SATA2 4. installed Windows 8.1, copied data over, reinstalled applications and so on. 5. all working perfectly. Now every time I boot up the machine, I'm offered options if I want to boot to Windows 8.1 or Win7. No problem there. 6. Now I wanted to remove the imaged HDD from SATA2 port, so I did - and here comes the problem:
All I get now is the black screen with flashing cursor in top left corner. How is this possible ? When I plug the second drive in all works as before. I just have to remove the second drive. How can I do this? In the attached image you can see my drives from Windows 8.1 the Disk0 is the one I need to keep - that's a Windows 8.1 ( C: ) Disk1 (imaged HDD) is the one with Win7 on it and needs to be removed.
I recently upgraded my dell 1645 from windows 7 to 8.
I installed most of the drivers from the dell website even though they were meants for win 7. For some of them I installed drivers directly from the device manufacturers website.
When the computer first starts up it passes the windows logo, and then a black screen is shown (no cursor) for a good 5 minutes. Then it advances to the login (seatle cartoon image) and everything works perfectly.
I had another issue before that I think I solved which was the intel rapid storage technology. Whenever the computer would go to sleep I got a windows BSOD saying driver_irql_less_than_or_equal. But after installing the newest intel rapid storage drivers sleep seams to work perfectly.
The drivers I installed from the manufacturers that arent on the official 1645 driver page:
- ati radeon drivers from ati - synaptics drivers - bluetooth 380 drivers, supposed to be 370 I believe but it seems to only be 380 available which people say works.
I also tried running the intel chipset automatic check, which said I was on the latest.
For some reason when I try to click on a video, my cursor is offset to a different position where I am unable to start it. This isn't a problem for things like youtube, but I'm having trouble starting videos from mp4uploads and engine.
If you look in the pictures I posted, the cursor only has problems when it's inside the video window. The places where I marked in red is where the cursor is when I right click on it and inside the blue is where I can click to start the video in that particular video player and am unable to go full screen. As I said before this problem isn't on all video players. Others have my cursor in different positions.