I have a Canon i9100 printer which worked great through XP, Vista and Win 7....Canon provided updated drivers.. However, for 8.1, Canon does not provide a driver for this printer. Is there another source which makes a generic driver for this printer so it does not become obsolete?
View 1 RepliesWindows 8 Release Preview 64 bit found my USB connected Canon Pixma iP5000 printer, but didn't install a driver. WU says there is an update available, but that will not install. Error is WindowsUpdate_80070BC8, which doesn't work much. I haven't been able to find a 64 bit driver on any of the Canon sites, but I have found an XP 64 driver, on another site.
Checking properties for this printer in Devices & Printers throws up the following event: Driver Management concluded the process to install driver prnca00m.inf_amd64_26559657092dd606prnca00m.inf for Device Instance ID
USBPRINTCANONIP50007&8F48641&3&USB005 with the following status: 0xBC8.
This status code is listed as ERROR_CORE_DRIVER_PACKAGE_NOT_FOUND
Attempting to update the driver from the printer properties finds a couple of drivers, but they also fail to find a core driver package. Add printer wizard finds a compatible driver on my machine, but that also fails for the same reason.
This printer is installed OK on my W7 installation on the same machine.
The 64 bit XP driver installed OK on this Windows 8 RP installation, and printed a file OK, but attempting to upgrade results in the same error. After installing this XP driver, WU reported that the update installed, but Update History shows 'Failed'. Now WU isn't offering the update.
I have one main computer with a router and 3 other computers who receive their internet wireless. How can you set up the canon PIXMA MX700 to enable printing from all computers?
View 1 Replies View RelatedTrying to install a Canon MF5750 Printer on windows 8.1. Canon has a driver for this printer and windows 8.1 64.
My primary problem is that when I get to the point of selecting a port, I am unsure of what to do. My choices are LPT 1-4, COM 1-4, FILE, and PORTPROMPT, none of which would seem to represent a usb port. By crawling through the Device Manager listings, I should have plenty of usb 2 and 3 ports. So my question is what happened to my usb ports. An additional observation is that while the printer and fax functions are installed (though not working) the scan function is not installed.
I have a HP laptop, which I just recently run system recovery on. I had a pixma MP495 series print installed wireless and it was working fine. (wireless) I believe that I had used the compatibility wizard to install it as windows 7. My OS is windows 8.1. When attempting to run setup, I get a window that my computer has a newer version of MP driver in it so it will skip the installation of the driver. It runs the rest of the setup and gets to detecting the printer. I have the USB cable hooked to the computer also. It searchs both wireless and through the USB connection and can not find the printer.
View 6 Replies View RelatedI'm in program trying to remove the canon MP495 series MP Driver and it will not remove. A window says that the printer is in use by someone. The printer in question is completely turned off. I've shut the computer off and restarted it and it is still there. What now? I was trying to remove a virus and it had programs running to close them first. This is why I had to run recovery to clear it.
View 1 Replies View RelatedI have a Kodak Scanner and Canon Imageclass printer to which neither functions with my Windows 8 laptop. I tried installing new drivers a couple of months ago with no success. Do I now have to go out and get all new hardware just to be able to print/scan?
View 6 Replies View RelatedI have a windows 8 64 bit system. There is a laptop with windows 7. I have my canon mp470 printer plugged into the windows 8 system via usb. Up until a few days ago we could printer from the windows 7 laptop through the network. I have done 2 things since then. 1.) I uninstalled mcaffee internet security and installed nortons internet security and 2.) I tried to update to windows 8.1 which failed part way through the update then it said the system was reverting back to windows 8.0
Now I can't print from the laptop. (nothing changed on the laptop only on the windows 8 system).
Last night two updates from MS, KB2919355 & KB2961887 were installed. Today the driver for my Epson R3000 printer was gone. Windows 8/8.1 seems to have a problem with this printer, even though Epson claims it is compatible and provides updated drivers. When I updated from Windows 8 to 8.1, it replaced my Epson drivers is a very basic MS generic driver. I had to manually install the Epson drivers again. That was a pain, and took several attempts. Is there a recommended way to install a driver that works?
View 1 Replies View RelatedJust updated my window 8 to window 8.1 last few months and getting trouble with my little printer.
Problem: Driver need troubleshooting (unavailable) but i already install?
1)having problem when install the driver from HP support and downloaded the correct driver which is window 8.1 64bit.
2)when i click install, getting to the usb connection part, it said connection fail (usb connection is really fine, i tried it with another window 8 and window 7 laptop..successful, but my window 8.1 can't).
What i have done after i found the driver error?
1) delete the old driver
2) reinstall the driver
3)try to use update driver option from device manager (comes out this error: The system cannot find the file specified)
I've tried several installs, gone to Lexmarks's site, searched the web, and I can't get a Lexmark z730 inkjet driver, or a work around that might work.
Do I resign myself to the inconvenience of using my XP laptop for the occasional print job, or can something be done?
I'm facing a problem about my printer under Windows 8.1. I cannot create custom paper size.
My previous printer is a HP P2035 printer. According to HP, the driver is built into Windows 8.1 and thus does not offer any driver for Windows 8.1. The printer is detected correctly and I'm able to print, except I cannot create a custom paper size.
I raised this issue on the HP forum and a couple of members explained that the printer is pretty old and thus there is no incentive for Microsoft nor HP to develop a driver for Windows 8.1
Then I change to Fuji Xerox DocuPrint p355db. Again this printer is able to print just fine by Windows 8.1 built in driver, except the driver just won't allow me to create a custom paper size!
new build win 8.1 I am trying to configure an HP printer driver to digitally scan to a specific folder on a hard drive it says "the device needs to authenticate itself on the network before it can save to a network folder" then asks for my user name and password (not the wireless router name and password) direct Ethernet connection from main computer to router I have tried many variations without success how do I figure out my network computer and user name: in net speak ? e.g. ????????username ?? the Microsoft account adds a whole new level of complexity and woe is my user password my pin number or is it my MS account password or something else is my user name "Robert" as listed in windowsusers folder or is it some variation of in "netspeak" my new build screams but I am undergoing the usual trials of a new clean install (Win 8.1)
View 6 Replies View RelatedWindows detects my Ricoh AC104 on a wireless network but insists it's an HP 5Si MX and installs that driver. When it adds the printer, it loads the driver automatically and without choice or prompt. Perhaps the misidentification has something to do with the printer driver in between (Hawking HMPS1U). I need to force it to use the printer driver from Ricoh, but I've had no luck so far. Some things I've tried:
1. There's an installation program with the Ricoh driver, but it doesn't see the printer on a wireless network.
2. Going to the advanced options for the printer on the device manager, I can see the driver info but Windows will not permit changes. I tried as Administrator also. No difference.
3. Attempting to update the driver just leads to Windows telling me the (wrong) driver is up to date.
Shared printer(HP laserjet 1300) on local area network connecting problem and show "No driver found" error simple attached image.
While this was not a problem in previous Windows 8 enterprise.
Driveronwin8.1.pn
I have had no problems with Win 7 computers finding my Canon G16 WiFi camera and connection it to them. But my Win 8.1 system just can't find the camera to get it connected.
View 3 Replies View RelatedThe software for the Canon MP280 is automatically installed but the scanner is not recognized by programs such as Paperport. When I try to use the installation CD that came with the MP280 it starts the process of installation and gets to the install screen and tells me that a printer is already in use and that I should reboot and try again. The same message comes back after following the install process from the CD again. Everything works just fine with Windows 7
View 2 Replies View RelatedMy computer has always had intermittent BSOD but generally it's been only 1-2 a month and after a system restart everything works fine. In the last couple of weeks I've been getting BSOD after only a few minutes of operation every time I start up and generally after these errors the computer won't boot - sometimes it will be a black screen after BIOS check, sometimes it won't even get that far - just black screen without the BIOS check even starting. Usually the only way to get it to boot again is to disconnect the power and remove the CMOS battery from the motherboard. I've run driver verifier which has indeed generated it's own minidumps but I don't really understand what these error reports are trying to tell me.
View 1 Replies View RelatedI am trying to be able to see CR2 files (RAW photo files from Canon) as thumbnail icons in Windows Explorer. I am using Windows 8.
Microsoft's codec pack (Download: Microsoft Camera Codec Pack - Microsoft Download Center - Download Details) does not work for Windows 8. When I am trying to install it, I get an error message mentioning that I can use Windows 8 Update function, but doesn't give any more information on how to do this exactly.
My laptop automatically updated to Windows 8.1 and now my HP wireless printer is not recognized.
Even if I plug it in to the USB port, it's like it won't even find the printer. I don't even hear the sound that the printer is plugging in. I have tried several USB ports and yes, the ports are working as I have tried other hardware in them.
Hate Windows 8
I have an HP network printer, that's not being used anymore, showing up in my print dialogs, but not under Devices and Printers. How can I get rid of it as it annoys me?
View 4 Replies View RelatedIn the settings,the words comes up,you are offline;therefore,printer can't print.How do I get to online.
View 1 Replies View RelatedI can't seem to install my HP Printer,
It says that the computer can't find the c:windowssystem3hpzprl40.exe
I've check the windows installer and it's not set as automatic, and I can't change it, the options are disable.
Just got a new laptop with windows 8.1. it cant find my epson sx510w printer but can see all wireless connections in my area.
View 9 Replies View RelatedEpson WF 2540 keeps going offline every time my Dell XPS 13 running Windows 8 goes to sleep. Am looking to see what I need to change in the software to keep this from happening. It will go back online after sometime or I have to go and turn it off to get it back online.
View 3 Replies View Relatedi has install my printer (HP Laserjet P1102) and using that with no problem. But, Suddenly i want to print my file but there are message say the printer isn't installed on my windows. Now, i want to install my printer but there are message "There are no more endpoint available from the endpoint mapper".
View 2 Replies View Relatedi am now aware that normal booting only achievable when my USB printer is disconnected.
Can't begin to understand what is happening here.
Asus P8Z68-VLX / Intel i3 2120 / Win 8 Pro 64
I have two laptops, Lenova with Windows 8 and HP Pavilion with Windows 8 pro. I have a HP Officejet 7560 hooked up to the Lenova.
When I try to access the printer from the HP, it can see the printer, but in trying to connect, Windows is telling me access denied.
If I hookup the printer to the HP, the Lenova can see it, connect to it and print to it just fine.
I have checked all the sharing and permissions settings on my Lenova, and everything should be set to allow another computer to access the printer, but it is still giving me the same message.
The Printer drivers are all up-to-date. I ran DriverScanner 2013
Downloaded printer driver for a hp deskjet 540 printer get errors all the time.
View 2 Replies View RelatedI am using windows 8 and have problems printing documents, the printers only print part of the document. It's not the printer, because it happens at my work and at home.
View 14 Replies View RelatedI have a hp laptop and a hp 5510 photo smart printer and when I put the disk in to install it I get the following message.
The computer does not meet the following system requirements The operating system of this computer is not supported. This software can only be installed on the computers running the following windows operating systems.
1) Windows xp with service pack 2
2)windows vista
3) Windows 7
Upgrade the operating system of this computer or install this software on another computer system.
Now before I reinstalled windows 8, I did install this disk before. and it does the same with the usb in or out, Yet it will print with the usb in but I cannot get it to print with the wireless function with the usb out,