Not Able To Install Canon Wireless Printer - Pixma MP495 Series
Sep 12, 2014
I have a HP laptop, which I just recently run system recovery on. I had a pixma MP495 series print installed wireless and it was working fine. (wireless) I believe that I had used the compatibility wizard to install it as windows 7. My OS is windows 8.1. When attempting to run setup, I get a window that my computer has a newer version of MP driver in it so it will skip the installation of the driver. It runs the rest of the setup and gets to detecting the printer. I have the USB cable hooked to the computer also. It searchs both wireless and through the USB connection and can not find the printer.
View 6 Replies
ADVERTISEMENT
Sep 13, 2014
I'm in program trying to remove the canon MP495 series MP Driver and it will not remove. A window says that the printer is in use by someone. The printer in question is completely turned off. I've shut the computer off and restarted it and it is still there. What now? I was trying to remove a virus and it had programs running to close them first. This is why I had to run recovery to clear it.
View 1 Replies
View Related
Jun 2, 2012
Windows 8 Release Preview 64 bit found my USB connected Canon Pixma iP5000 printer, but didn't install a driver. WU says there is an update available, but that will not install. Error is WindowsUpdate_80070BC8, which doesn't work much. I haven't been able to find a 64 bit driver on any of the Canon sites, but I have found an XP 64 driver, on another site.
Checking properties for this printer in Devices & Printers throws up the following event: Driver Management concluded the process to install driver prnca00m.inf_amd64_26559657092dd606prnca00m.inf for Device Instance ID
USBPRINTCANONIP50007&8F48641&3&USB005 with the following status: 0xBC8.
This status code is listed as ERROR_CORE_DRIVER_PACKAGE_NOT_FOUND
Attempting to update the driver from the printer properties finds a couple of drivers, but they also fail to find a core driver package. Add printer wizard finds a compatible driver on my machine, but that also fails for the same reason.
This printer is installed OK on my W7 installation on the same machine.
The 64 bit XP driver installed OK on this Windows 8 RP installation, and printed a file OK, but attempting to upgrade results in the same error. After installing this XP driver, WU reported that the update installed, but Update History shows 'Failed'. Now WU isn't offering the update.
View 2 Replies
View Related
Sep 26, 2013
I looked at the specs and they indicate this printer will function on W7 and W7 SP1 with no mention of Windows 8.
Could it possibly work on Windows 8.
View 1 Replies
View Related
Apr 19, 2014
I have a Canon i9100 printer which worked great through XP, Vista and Win 7....Canon provided updated drivers.. However, for 8.1, Canon does not provide a driver for this printer. Is there another source which makes a generic driver for this printer so it does not become obsolete?
View 1 Replies
View Related
Feb 27, 2013
I have one main computer with a router and 3 other computers who receive their internet wireless. How can you set up the canon PIXMA MX700 to enable printing from all computers?
View 1 Replies
View Related
Jan 1, 2014
Trying to install a Canon MF5750 Printer on windows 8.1. Canon has a driver for this printer and windows 8.1 64.
My primary problem is that when I get to the point of selecting a port, I am unsure of what to do. My choices are LPT 1-4, COM 1-4, FILE, and PORTPROMPT, none of which would seem to represent a usb port. By crawling through the Device Manager listings, I should have plenty of usb 2 and 3 ports. So my question is what happened to my usb ports. An additional observation is that while the printer and fax functions are installed (though not working) the scan function is not installed.
View 9 Replies
View Related
Sep 3, 2013
I have a Kodak Scanner and Canon Imageclass printer to which neither functions with my Windows 8 laptop. I tried installing new drivers a couple of months ago with no success. Do I now have to go out and get all new hardware just to be able to print/scan?
View 6 Replies
View Related
Oct 22, 2013
I have a windows 8 64 bit system. There is a laptop with windows 7. I have my canon mp470 printer plugged into the windows 8 system via usb. Up until a few days ago we could printer from the windows 7 laptop through the network. I have done 2 things since then. 1.) I uninstalled mcaffee internet security and installed nortons internet security and 2.) I tried to update to windows 8.1 which failed part way through the update then it said the system was reverting back to windows 8.0
Now I can't print from the laptop. (nothing changed on the laptop only on the windows 8 system).
View 3 Replies
View Related
Sep 15, 2014
Just got a new laptop with windows 8.1. it cant find my epson sx510w printer but can see all wireless connections in my area.
View 9 Replies
View Related
Mar 3, 2014
I am connected to my router by a Ethernet cable. can i still connect to my printer wireless?
View 7 Replies
View Related
Apr 30, 2014
All of a sudden my wireless printer has stopped scanning i just get a message saying no scanner detected it is a hp110a model. I have uninstalled and installed it a few times now but still not working it is printing ok.
View 8 Replies
View Related
Apr 25, 2014
I've once again encountered this problem with my Canon PIXMA MP620 printer/scanner: when using it wirelessly, it can't print. According to 'Devices And Printers', it's offline and therefore most programs I use in Windows 8.1 claim it can't print.
However, using Canon's program 'MP Navigator', it can scan from the printer without any problems. I can scan from the computer to the printer and the other way around. Therefore I'm suspecting that the problems lies with Windows 8.1 and not the printer. The connection is obviously there but Windows doesn't seem to think so.
I can't find a solution in the printer's manual, Windows doesn't give me anything when I try to troubleshoot the printer in question, and Canon's own 'Network IJ Tool' can find the printer but says it's doesn't work without clarifying why.
View 2 Replies
View Related
Sep 30, 2013
I have a Brother HL 2270DW printer in one room of my house. Each of my two Win7 machines, all in different rooms, print to this printer wirelessly with no problems. However, my new Dell One 2020 detects the the printer as a wireless printer but reports something like 'Driver Unavailable' in Settings/Devices. How do I go about making a driver available? I have the latest Brother drivers on my HD but can't seem to figure out how to install them under Win 8. The CD that came with the printer has only very old, out of date drivers.
View 2 Replies
View Related
Aug 9, 2014
Windows detects my Ricoh AC104 on a wireless network but insists it's an HP 5Si MX and installs that driver. When it adds the printer, it loads the driver automatically and without choice or prompt. Perhaps the misidentification has something to do with the printer driver in between (Hawking HMPS1U). I need to force it to use the printer driver from Ricoh, but I've had no luck so far. Some things I've tried:
1. There's an installation program with the Ricoh driver, but it doesn't see the printer on a wireless network.
2. Going to the advanced options for the printer on the device manager, I can see the driver info but Windows will not permit changes. I tried as Administrator also. No difference.
3. Attempting to update the driver just leads to Windows telling me the (wrong) driver is up to date.
View 2 Replies
View Related
Jan 16, 2014
So I downloaded the ISO and burned it via unetbootin. I go into bios and change the following settings: disable fast boot, and make the OS selection CMS make USB boot first Then when i boot, it just boots back to windows 8. I also noticed that once I reboot back into bios, the USB is not set to first boot as I set it initially.
By the way I have a Samsung Series 7 Chronos with nividia graphics.
View 2 Replies
View Related
Sep 12, 2013
I Know that Windows 8 doesn't support this program. Before i have Windows 8 but i had to format. Now i dont' find how to install it. How can i install Graphics Media Accelerator of Mobile Intel R Series Express Chipset Family?
View 6 Replies
View Related
Mar 10, 2014
I can't seem to install my HP Printer,
It says that the computer can't find the c:windowssystem3hpzprl40.exe
I've check the windows installer and it's not set as automatic, and I can't change it, the options are disable.
View 2 Replies
View Related
Dec 5, 2013
I have a hp laptop and a hp 5510 photo smart printer and when I put the disk in to install it I get the following message.
The computer does not meet the following system requirements The operating system of this computer is not supported. This software can only be installed on the computers running the following windows operating systems.
1) Windows xp with service pack 2
2)windows vista
3) Windows 7
Upgrade the operating system of this computer or install this software on another computer system.
Now before I reinstalled windows 8, I did install this disk before. and it does the same with the usb in or out, Yet it will print with the usb in but I cannot get it to print with the wireless function with the usb out,
View 5 Replies
View Related
Mar 25, 2014
When installing printer missing file hpzshl.ice shows and stops install
View 2 Replies
View Related
Feb 27, 2013
This morning I installed an optional update from Windows Update. It was Ralink Technology WLAN 802.11 wireless LAN card.
Since then, when I try to print to my wireless network printer, the network would disconnect then come back on after a while. The update shows up in Update History as successfully installed but not in the installed updates. System restore is of no support here. The network configuration page shows normal. The web does not appear to be affected. I made a new network connection for the printer but it did not work.
Is there a way to reverse this update or should I uninstall the 802.11 LAN card and let windows re-install anew.
The printer is a HP Officejet Pro 8600e
View 5 Replies
View Related
May 30, 2014
My laptop tends to install all the printers on the network where I work. I dont use any of those printers and having them installed is pointless and a pain. I can delete them, but it will go and install them all again. Is there anyway I can disable this so it doesn't keep doing it?
View 3 Replies
View Related
Mar 28, 2013
just formatted to install windows 8 and then install the Belkin wireless software for the dongle after that was complete restarted and the dongle wasn't showing any available connections Got the software from Belkin
View 2 Replies
View Related
Feb 6, 2014
I just bought a Dell Inspiron 3537 with 500 gb hard drive capacity, 4 GB RAM, no graphics card and came with UBUNTU as its OS. So I made a clean install of Windows 8.1 pro myself. All the drivers that have been provided by the site installed perfectly, except for the 1705 wireless and bluetooth driver. It says that the driver isnt for my platform .. wth :@I even tried checking my drivers via Intel and it says that it doesnt recognize my wireless card.
View 10 Replies
View Related
Nov 15, 2013
I have had no problems with Win 7 computers finding my Canon G16 WiFi camera and connection it to them. But my Win 8.1 system just can't find the camera to get it connected.
View 3 Replies
View Related
Mar 7, 2012
The software for the Canon MP280 is automatically installed but the scanner is not recognized by programs such as Paperport. When I try to use the installation CD that came with the MP280 it starts the process of installation and gets to the install screen and tells me that a printer is already in use and that I should reboot and try again. The same message comes back after following the install process from the CD again. Everything works just fine with Windows 7
View 2 Replies
View Related
Jul 14, 2013
I recently upgraded my Samsung Series 7 Ultra to the Windows 8.1 preview to check out it's new offerings. It's ok I suppose. Some positives and some negatives. Anyway on to my point:
So with the update came some unwanted changes. It seems to have disabled most of my func keys on the top row of my keyboard. Also, it now no longer saves my touchpad settings. They are reset to default everytime the system is rebooted.
I'm guessing this has to do with the Samsung software that controls these features not yet upated or ready to run on 8.1.
View 9 Replies
View Related
Jan 28, 2013
I have a Samsung Series 5 Ultra Touch. The other day, for reasons unknown, it would start up into the auto repair process. It would "diagnose PC" then "repairing", warning that might take a long time. Well after 24 hours I figured this was a dead end.
I have been through a crazy number of troubleshooting steps
--couldn't get into any F8 or Shift=F8 action
--Samsung's Restore mode crashed (F4)
--Made a recovery USB and figured out the magical BIOS steps that would actually allow me to use it after much trial and error)
The recovery process has yielded no joy.
--System Restore crashed
--Automatic Repair was never ending
--System Refresh said the drive was locked
So I started using DOS commands. Chkdsk seems to be taking forever to accomplish very little. See the screenshot:
Should I let it continue with chkdsk /f /r /x?
View 5 Replies
View Related
Aug 25, 2014
I have a Samsung NP9000 model NP900X4C-A05AU. It regularly crashes due to full memory. It has 8G of RAM, running Windows 8.1. It's done this since day 1 - I managed to remove some Samsung bloatware that mitigated the problem somewhat, i.e. from once a day to three times a week. Mostly, just before it happens I get the "close some programs or lose some data" message, and I can possibly kill something (chrome usually) to free some memory so I can reboot cleanly. Usually at this point, the "Modified" section of the Task Manager Memory usage tab is quite big. Reboot and it's good for another couple of days.
Sometimes the "close some programs" message is too late... I get the message and almost immediately Windows crashes and reboots. Up until last week, this didn't cause any issues after the reboot. But last week, it did this, gave me the message and immediately crashed. It took about 1 hour for it to reboot, sitting at the "please wait" dots. I was in the process of making a recovery USB to boot from when it finally came to life. Everything seemed ok, was able to start things up, and carried on as usual. Couple of days later, get the "close some programs" message, and am able to reboot. But the laptop takes 5 to 10 minutes to reboot. Up until I had this issue, a reboot would take 5 to 10 seconds (to get to the login prompt). Even a reboot after just rebooting takes 5 to 10 minutes. I've run scans on my SSD, it says everything is ok. Every reboot now takes 5 to 10 minutes.
View 3 Replies
View Related
Dec 17, 2013
I'll find a new folder has been created whose filename is a long series of HEX digits. An example:
6bed9f48b0b3717ec4110b2e.
What these folders contain? Can they be deleted?
View 3 Replies
View Related
Mar 23, 2013
I don't like the two finger scrolling on Windows 8 for Asus. It works decent but I still prefer the old fashions one finger scrolling it seems to be more fluid when scrolling through pages. For me it still feels unnatural to use two fingers; I want my Windows 8 PC back and toss the mac feature for two finger scrolling. I'm not sure why Asus added this because it really ruins my Windows 8 experience as scrolling is an essential function for workflow. I'll put it this way if one finger scrolling was enabled I would have a 10 out of 10 experience versus two finger scrolling I would have a 7 out of 10 experience.
View 3 Replies
View Related
