Setup Installation :: Not Able To Install Printer From Disk
Dec 5, 2013
I have a hp laptop and a hp 5510 photo smart printer and when I put the disk in to install it I get the following message.
The computer does not meet the following system requirements The operating system of this computer is not supported. This software can only be installed on the computers running the following windows operating systems.
1) Windows xp with service pack 2
3) Windows 7
Upgrade the operating system of this computer or install this software on another computer system.
Now before I reinstalled windows 8, I did install this disk before. and it does the same with the usb in or out, Yet it will print with the usb in but I cannot get it to print with the wireless function with the usb out,
On January 31st, I bought a product key for Win 8 Pro paying $40. I downloaded the Windows.iso that came with the purchase. Afterwards, I burnt the Windows.iso to two separate DVD Roms, opening the ISO with Windows Disk Image Burner.
When one of the two DVD Roms is opened, the program setup.exe presents itself, together with about 9 folders and files. (Please see the attachment, showing the contents of the DVD Rom.)
Setup.exe is obviously the trigger for installing Win 8.
My question is: Will this trigger (setup.exe) install the full Win 8 operating system, using what is stored on the DVD Rom, plus perhaps elements downloaded from the internet during the installation process? Or must I have installation elements on my hard drive, downloaded during the purchase, in addition to the DVD Rom?
In other words, is the DVD Rom burnt from the ISO the "full" Windows 8, the only thing I need apart from my product key, to install Win 8?
I would like to try Windows 8 Pro on my PC, I've currently installed Windows 7 Ultimate (32-bit) with SP1 on my PC which takes about 7.8 gigs of disk space. So, my question is that how much disk space does a normal clean installation of Windows 8 Pro (32-bit) takes?
Is this possible? I have a code and I've just been researching/trying to work out how to do this for the past few days with no real success. As far as I'm aware I could make my own bootable USB/disk but the windows 8.1 updater doesn't work on Vista. I thought I could maybe make the USB with my brother's PC which runs 8.1 but the program asks for the code and I'm not sure whether that would lock that code to his PC or not.
Failing that I thought I could maybe download the iso (I think that's what it's called) and make the USB without the official windows 8.1 program though I'm not sure of that either.
I have a copy of Windows 8.1pro 64 bit which I run on my main computer, I have an old laptop which is about 7-8 years old, I'd like to install a copy of Win 8 for test purposes and mess around with for a few months.
The laptop is so old it won't let me install 64 bit, is there a 32 bit version on the disk hidden away I could install or are they totally separate disks?
Is it possible to download a copy which would work for 30 days without entering a serial number or even an old beta copy.
I tried to install 32 bit Windows 8 in my friends laptop through bootable usb. It has win7 preloaded. I tried for the dual boot. But when I select the partition drive it said that windows cannot be install in that drive because the selected drive is GPT partition style. How to install Windows 8 os in that GPT partition style hard drive.
I partitioned my hard disk into a 150GB (C) and 500GB (D) and upgraded from Win7 to Windows 8 (and subsequently Windows 8.1 after the recent updates). The OS is installed onto the C Drive.
Performed a Clean Installation of Windows 8 on my C Drive. Under the Choose What To Keep Option, I selected Nothing.
Technically speaking my C Drive would have been wiped clean but after the Windows 8 installation, my C Drive only has 5GB of space left (145GB is being used). The Windows 8 OS is not detecting any of the old programs in my C Drive and the automated Disk Clean up feature only offers removal of temporary internet files. Which brings me to one possible assumption...
The Clean Installation Failed. Windows 8 simply installed itself again on my C Drive and the remaining disk space (containing my previous Windows 8.1 OS and programs) is locked down somewhere. I suspect this had something to do with changing my HD format 3 years ago when I wiped clean my pre-loaded ASUS laptop Win7 and partitioned it to install my Windows 8.
Is it possible not to have the partition "recovery"?
Because if you look at the two tutorials:
- UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with - Windows 7 Forums
- UEFI (Unified Extensible Firmware Interface) - Install Windows 8 with
In the tutorial to install Windows 7 in UEFI, there is not that damn partition recovery, while in the tutorial for Windows 8, we can see it.
When I install Windows 7 (MBR mode), I avoid this partition "recovery" by creating a partition with a name before installation. I install the OS on it and everything is fine, no partition "recovery" But here, since one must delete all partitions, If I create a GPT disk with a partitioning tool before installing, is that it might be appropriate?
I just got a new laptop, a Lenovo X230, for which I paid extra to have the OS on it as Windows 8 Pro.
So--now I have it, and Win 8 Pro 64 is installed and activated on it. I am a legal owner of Win 8 Pro.
However, I would like to do a clean install of Win 8 on the computer, to have it free of bloatware, etc. (In fact, I would like to set up a multi-boot with Win 7, and perhaps even triple boot with Xp as well. (I have installation media and my product keys for XP and 7 though, so those are not really a problem.)
The computer came with no discs at all. There is a procedure to make recovery disks. I may do that, but I think those will be to restore the computer to how it came from the factory, and therefore not usable for a clean install.
I don't see my product key for Win 8 anywhere. Not on the computer, not on any kind of card that came with it, etc.
I looked at the tutorial here for clean install of Windows 8, but it requires an install disc and product key. I have neither, although I am a legal owner of Windows 8.
Is there a way I can create (from my installed Windows 8) a win 8 install disk, that can be used for a clean install? Or a link to download one? Is there a way I can get my product key?
I am attempting to install Windows 8 (I currently have Vista) but Autorun doesn't work and when I attempt to access the disk in the CD ROM I am asked if I want to format the empty disk. I recently had to reformat the hard drive back to its factory settings (Vista O/S) for reasons I won't go into. The problem isn't limited to the installation disk.
When Win 8.1 Preview was first released it installed without issue in a second partition on my Win 7 Pro Lenovo Edge E335 and created a standard dual boot setup. A week ago something or other started causing chaos in Win 7 though 8.1 still ran normally, but as 7 is my day-to-day system I needed to get it working normally again. Three different Acronis images restored OK but then each developed the same problems, so probably a rootkit was behind it all. Unable to overcome these problems I restored to factory condition, reinstalled my software and life returned to normal.
I then set about repartitioning to install Win 8.1 Preview again but hit a first problem when the same DVD and key I had used previously failed as the key was not accepted. Undaunted I tried again with a new key I found on the internet and this key did work. However the install then failed with the message that Win 8.1 can not be installed to an MBR disk, only to a GPT disk. Now this is the same disk that installed to the same MBR HDD previously, only the key being different.
Is the only solution to this to convert the entire disk to GPT and reinstall both 7 and 8.1 again? If so, that's a bit of a problem as my Win 7 was preinstalled to an MBR disk and I'm certainly not buying it again.
The Win 8 Pro/Win 7 Ult on the left relates to a different box.
As I used to transfer for our customers Windows 7 from HDD to SSD, I used to pull the HDD out, take the SSD, make a transfer either with Acronis, Paragon or manually. Usually at home, one my own computer, simply by putting both HDDs in.
Today, I got a first Windows 8 computer to migrate. As soon as I connected the main HDD from the laptop to my computer, at boot, I got the blue screen. When I removed the HDD, my system booted OK.
What is that??? I never ever saw Windows crashing just because I put a HDD in it. I left the laptop in the company, so I wasn't able to put it back (going to do it tomorrow), but I already did the first Windows 8 setup - it's an Asus laptop.
Weird thing is, that even when connecting via USB (I have a SATA/USB3 dongle which I can use for such purposes), it first recognizes the disk, then it shows the 2nd partition (DATA), and then it also goes into blue screen. What the hell is that? Is it some new Windows 8 protection or something?
Trouble is, Paragon migration software I bought previously doesn't support Windows 8, so I would have to buy a new one...
Quick question. I am trying to use Acronis disk imager. The second drive I am trying to use had been a primary drive, but it is not the current active partition. The "true" active drive is C...I am trying to reformat/delete everything off of that second drive so I can use Acronis and make the D drive my primary (since it's larger/faster) Disk management won't let me format D because it is showing active as well. I am not sure what to do here. It also wouldn't let me just delete the files manually. how to get around this?
Basically, I upgraded from windows 8 to 8.1 a few weeks ago and since I could barely run any games, they have compatibility issues and all sorts.
I tried updating my drivers, it says they're all up to date I spent countless hours looking for solutions on how to downgrade All the solutions require me to have a disk, but I lost it I also looked up on how to set it back to it's factory setting, but it doesn't work
I was told to press F8 or F9 (can't remember at them moment) as soon as the computer turns on until the recovery screen pops up, but it never does.
I'm using an Alienware x51. Is it even possible to reset my computer without the disk? if not, then where can i get another disk that came with the computer?
Woke up this morning to a frozen Windows 8 screen. Only way out was to power off. On reboot, my nightmare began.
No boot device. Long story short, I went through many attempts at a reset, repair, reinstalls, off the Windows 8 DVD, all to no avail. Indeed, when I booted into Dell diagnostics, it confirmed a failed hard drive.
(Sidebar : was there an automated patch pushed last night.....like there was for Win 7?).
Keeping calm, I know I have all my data backed, up, but I am trying to avoid having to rebuild everything from scratch. I have been vigilant in doing image and file backups for years..... But I always manage to hit a brick wall somewhere along the way.
I have summarized what I have and do not have available to me here : Recovering from disk failure
I ahad updatedmy wife's laptop acer spire 5740 G from windows 7 to 8 and then updated to 8.1. She did not like os and asked me to revert back to 7. After running setup I formated the drivve C containing windows 8. But now computer doesnt boot and I tried to reinstall teh system but I cant see my hard disk- Setup runs till where do you want to install your OS and then I cant find my hard disk
Originally my laptop came with Windows 7 and when i looked at disk management my disks were formatted with UEFI schema. One of my friend gave me a UEFI bootable USB drive loaded with Windows 8. So, i thought why not give it a try. So, I created a backup of my OEM Windows 7 and saved the iso files in a seperate external HD (created twice just to be sure . Now, i decided to load the Windows 8. Booted into the BIOS and there is an option to select the USB drive along with the UEFI option for that USB drive. I selected the UEFI option but some reason it does not boot into UEFI.
So I decided to select the standard USB install and this option let me install windows 8. In the process of installing i formatted the partitions and made a single partition and installed Windows 8 on it. I am guessing now the drive is not GPT but MBR. I also noticed that his installation USB disk had an option to select either 32bit or 64bit of Windows 8... Would Microsoft create a same iso file with both versions? I am guessing he created the USB from a illegitimate source.
I am planning on purchasing Windows 8 Pro version as an iso but wanted to be confident that it would work with UEFI architecture.
Questions: 1. Why would the system NOT boot from UEFI? 2. If I download the legitimate iso from Microsoft and wanted to install Window8 Pro via UEFI, I am sure i would have to format my SSD to GPT and how would i go about formatting it during installation? 3. How would i create a recoverable USB for my iso image i created for Windows 7 via ASUS AI Recovery. Do I need to follow the same procedure as stated in creating bootable USB disk (i.e. FAT32 system) via diskpart utility?
I have a dell laptop with winows 8 preinstalled on it. Soon after the purchase of my laptop I created recovery disk. It had only a single partion that time (Only C drive). Later I created a new partition 'D' from the existing space in C drive. Now my question is , can I still use the windows recovery disc that I created at the time when I had just one partition (just C drive)??
I just received an Asus Zenbook with 8 preinstalled.
It was configured with static IP and my office configuration, I would like to split the existing partition, create a new primary partition and clone the Win 8 installation in the new one.
Then set up a dual boot configuration, so I can have a clean "office config" and an "home config" with the same licenses and software in which I can mess with the configuration and setup my home stuff (DLNA server, access to home headless server, software to flash android handset, etc).
I have a 32-bit version of XP on my system, so when I do an upgrade within the XP OS. It automatically upgrades me to the 32-bit Windows 8. The actual installation went fine, without a hitch actually.
I have a 64-bit version of Vista that I may go ahead and do a clean install of first, just so I can upgrade to the 64-bit of Windows 8. But when I was going through the upgrade program, I never saw the option to create the ISO DVD or Flash drive. The only options were, "Install now, or install from desktop later". I chose "install from Desktop later" and found that all it did was suspend the installation until I clicked the desktop icon, which then just loaded the upgrade without giving me the option to create the DVD or Flash disk. Is there somewhere I can download the ISO so that I can create a disk?
How to Migrate OS to new Hard disk of the same or different size.
For this example, I am using a 500gb HDD moving a 250gb HDD.
Windows 8, uEFI, GPT & Secure Boot.
Using Paragon 12.
1) Download Paragon 12 from here: PARAGON Software Group - partition manager, drive backup, hard disk partitioning Free try link: Paragon Backup & Recovery Home 2) Install your New HDD to a USB Dvice. 3) Install & Open Paragon B&R 12. 4) Click on Hard Drive Migration. 5) Click Next. 6) Click Next. 7) Click Next. 8) Click Next. 9) Click Next. 9) Click Yes & Next. 10) Click Finish. 11) Remove old HDD & replace with New HDD.
Moving pre-installed Windows 8 from HDD to SSD Originally Posted by Epoch IT WORKED! So I know you posted this awhile ago, but I hadn't tried it because I could only find the paid version. After you posted this link I found the free trial version. I installed the program, went to Disk Migration, automated everything, took out the HDD, put in the SSD, and it boot in less than 5 seconds, perfectly.
Wow! There is a solution.
SSD Originally Posted by diesele This app checks alignment Download AS SSD benchmark 1.7.4739 - Technical Details - [URL]...
Hover the mouse in the top left box and it will indicate alignment or not.
Getting almost 500Mbps read and 400Mbps best write on the SSD :-) As Paragon have updated for Windows 8.1, you will need Paragon 14.
I have over 600 GB on my HDD from games, media, and files. I bought a 250GB SSD to boot my OS off of and put some selected programs on. Even after deselecting all my media files, there is still too much on my HDD for the included Samsung clone client to proceed. I just want to use my new SSD as a boot drive for the OS and for several programs while retaining all my other files on my existing HDD.
the hard disk of a Samsung Ultra 5 crashed. I have got a new hard disk. How do i restore windows 8 and Samsung drivers to the new hard disk? My friend has an exact notebook. How do i copy the recovery partition from his pc and use it on mine?
I am trying to do a clean install of windows 8 on my laptop (Elitebook 8770W) from a USB stick with original MS Windows OEM iso. Once I boot from usb stick, at the setup screen I enter the product key and then choose advanced to do a clean install. I then choose my hard disk partition to install windows but I get stuck here with this error:
"Windows cannot be installed to disk 0 partition 1"
I deleted the partition and choose to install on the unallocated space (150GIG) But still get the same error and when I click on the error this is what I get:
"Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's Bios"
In bios I have my disk set as Raid and I also have a m-sata Flash cache. If I change raid to AHCI I will be able then to install windows. But if I turn it back to raid after install I will no longer be able to boot I have to be in raid mode to use my m-sat as cache drive.
So here I am stuck not being able to install windows I even downloaded latest intel rapid storage technology drivers and put them on the usb stick with windows setup files. When i got the error I choose to load driver. But even after that I was getting same error and windows would not install on my HDD.
What's the right way to install in this condition (raid)?
I am trying to upgrade from windows 8 pro to windows 8.1 on a samsung laptop. The download completes and installation starts.
After a while the following message appears "you cant install windows on a usb flash drive with setup"
I am not actually trying to install to a flash drive. I contacted Microsoft and after 5 hours they said that I should connect to the internet with a cable and not by wireless in order to solve the problem (this didn't work of course and I had told them that it was an install problem and not a download problem).
Until very recently i was running Windows 8 with a 240 GB Sandisk SSD as a primary and a 2 TB Western Digital Green HDD as a storage. I decided to set up a RAID 1 setup so i purchased a second 2 TB HDD and installed it.
My intent was to run windows 8 off the 240 SSD as a primary and have a RAID 1 setup for my 2TB HDDs.
I learnt that my data configuration was set to AHCI. I decided to do a complete clean install and change the sata configuration in BIOS to RAID.
After successfully creating a RAID volume using my 2TB HDDs i proceeded to install Windows off my primary. I am however having difficulties in that it will not allow me to install windows on either drive.
I did a Clean Install on a new SSD Drive. When I tried the Relocate User Profiles to another Partition, the System gave me a message that I would have to re-install, but the Windows 8 CD will not re-install. What can I do?