Just built new system MoBo is a MSI P67a-GD65 HDD is Western Digital 10ealx plugged in with the proper 3.0 ata cable, Windows 7 64bit OS. The problem lies in Windows keeps telling me that the current driver isnt compatible and to go to Marvel for more current drivers/software , yet when I go there there is not 1 single download available (that I can find) to correct this issue.
View 1 Replies
I am using an Asus P6T Deluxe V2 motherboard and Windows 7 Professional. I am having a problem with my external (esata) disk drive being recognized by the OS. It used to work and now it don't?? During boot up I see the drive in the bios messages on my screen. Also when I look in device manager it shows the drive and says this device is working properly. However, when I click on "computer" its not there and no software program such as backup finds the drive either. I have tried uninstalling the drive in device manager and then rebooting. No luck? I am not sure when it quit working or why. Its not the drive as I have tried more than one and they are recognized when used in the USB port. I have uninstalled the Marvell 61xx RAID controller in the device manager also but no change?
View 10 Replies View RelatedI see also lots of people using Windows Media Player playing videos. I am using VLC, and never have used WMP or any other for videos.I wonder, what is most used by Tomshardware.com users? Well, I put down option for the Other, and it erased all the votes It sucks. But I had the page stil open in another tab So this is just before it happened [/URL] Uploaded with ImageShack.us
View 15 Replies View Relatedtomshardware com dell inspiron 1420 drivers?
View 1 Replies View RelatedIt says ''Missing operating system'' on boot up windows 7 after trying to turn it off manually (which means the turn on button)
View 2 Replies View RelatedI have a sony vaio laptop when i start up my computer i get " ERROR unable to start the Bluetooth stack service" what is this?
View 3 Replies View RelatedWhere can i get drivers for Marvell 614x for win7 ?
View 6 Replies View RelatedBeen pulling my hair out for a few days trying to solve an unidentified network problem with my Marvell Yukon 88E8052 . Tried all the fixes I found on the web and nothing worked. I finally did an ipconfig all and noticed the MAC address reported was totally bogus (something like F0-00-00-00-00-00). I went into adapter settings - advanced tab and configured the network name (MAC address) manually. As soon as I did that windows recognized the network and asked what type it was. I've been golden ever since.
View 1 Replies View RelatedI'm using a Marvell Yukon 88E8053 Gigabit adapter. When I installed 7 and logged in for the first time, my ethernet did not work. I had to use a USB drive to get drivers to install it. So, I get it installed and working and then I add the PC to my domain, log in with a domain user and it cant even find the DC to authenticate to!
I log back in with the user on the workgroup and find that the ethernet is not working. I look under device manager and the "Network Adapters" node is not even there! I try to install the Marvell adapter and ony Intel adapters are listed. When I try to "Add Legacy Device" and use the drivers for my Marvell, it won't even display a list to choose a model from, so at this point I'm pulling my hair out. I reboot, log in with the worgroup user and the network card shows up; OMG.
At this point I can finally log in with the domain user. I'm installing a bunch of software and I finally stop and let the system lock the computer. I come back, log in and guess what, no stinkin adapter; not even in device manager. Looks I have to reboot every time this happens. I just set the power options to High Performance, so hopefully I can get past this issue for now.
Anyone else having this problem?
I have lost all sound, any idea if updated the Marvell driver
View 1 Replies View RelatedMy system is slow to load and no real problem with using the internet. It's just when I play BF3 online my system crashes hard sometimes and powers off or I get real slow fps/ freezes up and I have to shut down the pc to get out. Windows tells me the hd controllers driver (Marvell) is not compatible with windows 7, that everything is bottle necking at the controller and suggests I go to the OEM site for an updated, compatible driver. No luck there. No driver and they claim that hd is compatible with Win 7. The hd is a Western Digital, WD 5000 AADS, 500 gig, 32 mb SATA 3. End of the road? Do I have to buy a new hd that has drivers that are compatible with windows 7?
View 5 Replies View RelatedIntel Core i7-960 3.20GHz LGA1366 CPU BX80601960
MB Intel BOX DX58OG
PSU Corsair 600W
MEM 4G KST KVR1333D3/4GR x3
EVGA GeForce GTX 560 Ti
Western Digital 500 GB SATA 6.0 GB-s Internal OEM Drive WD5000AAKX
Western Digital 2 TB Caviar Black SATA 6GB/s Internal OEM Drive WD2002FAEX
Just built this machine. Installed Windows 7 on the 500GB drive. Both drives are plugged into the blue SATA 6GB ports on my board. My drivers for these controllers are Marvell 91xx SATA 6G v1.2.0.1002 (Dated 3/7/2011). The second 2TB drive shows up in BIOS as well as Drive Management in Windows, but it will not be recognized as an accessible drive that can be formatted, partitioned, or anything. I get an error each time I attempt to format or partition through Drive Management. When I plug the 2TB drive into one of the other (black, Intel) SATA ports, the drive works fine, but in the blue ports it just won't seem to work. The 500GB drive, however, works perfectly as the boot disk in these ports.
Earlier many reported this problem with win 7 x64 build 7100, now I did a clean install of build 7600 x64 & the problem is now more frequently happening every 15 mins it freezes the comp.
Uploading stops
downloading sometime stops
sound/video freezes
applications stop responding
nothing can be done to the system at that time.
I am using asus P5B dlx wifi mobo with Marvell Yukon Gigabit Ethernet lan drivers latest v 11.10.6.3 dated 6/15/09.
Is there any solution to this I am pulling my hair due to this issue & cant use the comp.
Intel D975XBX2 Marvell SATA driver needed for Windows 7
Installed Windows 7 (62 bit) onto Intel D975XBX2 ATX Motherboard.
I can not get windows to recognize the SATA drives attached to the internal Marvell card.
BIOS see the drives, just not windows.
Attempted to install both Windows XP 64 and Vista 64 Intel drivers (STOR_allOS_8.7.0.1007_PV), but the install fails with "system does not meet the minimum requirements)
Any Ideas?
Yesterday i found out that my rear and centre speakers were producing really low sound. After a restart, Windows lost the ability to set it on 5.1 speaker config. It would just revert back to 2.1. I did a reinstall of the drivers but no luck.
PC Specs:
Intel i5 750 @stock
4GB RAM
SB Audigy 2 ZS
Windows 7 x64
Logitech X-540
i have window 7 test version installed however When i tried to install Act of war: Direct action, it didn't work and since i have herd how the game does not like more than 3 GB of rams i change the MSconfig settings and set a limit on the memory from the Advance options after i restarted my computer it crashed...and i am unable to undo the msconfig changes, because i am unable to access msconfig i have tried to boot into safemode and load msconfig, however it says i do not have the privileged to access msconfig...i have tried the automatic repair in window 7... and it didn't work anyother ways to undo it?i have a lot of accessments in the C: drive which i have not backed up?
View 19 Replies View RelatedI config my host file to go facebook (my country prevent me to go there ) and It work probably to one day... I cannot go to facebook, and I checked my host file again. It's still no change from that time, but there is a small thing: host file now has a key icon at left-bottom. (That I'm sure it doesn't appear before).
View 2 Replies View RelatedOS installed on SDD ..(Windows 7 Ultimate 64bit) I have a seperate 1TB HDD installed - partioned into 2 volumes. (D & E) I would like that the OS puts all programs by default onto D:I know some programs give you option to select location but not all ... can I setup that 'progam' folder is on D.
View 8 Replies View RelatedI just upgrade from bulid 7000 to build 7057. when i try to connect to the Internet it gets connected but when i try to surf no page loads. when i clicked on diagnose problem it says my comp doesn't have a valid ip config, wat do i do
View 7 Replies View Relatedtried to install another 80gig seagate sata drive
it installed o.k and in my computer shows disk d,I only want to use this as storage,but whenever i download anything and want to send it to d it isn;t in the drop down menu,its showing in the sidebar i can drag the files across into d and works o.k.but am mystified why i cant get it in dropdown.have formatted drive,in the disc manager it shows healthy and active.
by the way i think windows 7 is running great couple of teething troubles but o.k
I am running windows 7, I was able to connect to the internet via WiFi the whole time, now I am unable to do so. I have bought a new Lenovo laptop and I am now having a problem that tells me "invalid IP config" the whole time.
View 10 Replies View RelatedI looked in System Configuration on my W7 Ultimate.....There are 80 systems running. Which ones can I shut off to make my pc run faster with W7 and not mess it up. This is just after I rebooted I didn't have anything open yet. [code]
View 6 Replies View RelatedI want ALL my folders to show content as details.Even if they are pictures.How do I do that?Tried the folder options in the Config Screen (sorry, trying to translate from Dutch) but that won't work, plus I'm in a wrong folder, because that's one of the few I want to see as icons.
View 5 Replies View Relatedamd athlon x2 6000+Broadcom netxtreme 57xx gigabite controller (integrated)Fresh Install today.(no updates or sevice pack on yet)I have had this problem for about 4 months now,It started when i put my daughters xp laptop into the local connection(I use a 3 dongle to connect to Internet always have and never had any trouble,shared connection).I got xp working on my network no trouble,the trouble began when i switched off and went to bed.The next morning I replugged my xbox 360 into the local adapter and got the unidentified connection,to cut a long story short I have tried all fixes I could find on the Internet but nothing worked,so I manually assigned a ip address in the ip4 properties and everything i put on local adapter now works but it still says public unidentified network.
So today I formatted and re-installed windows 7 expecting this problem to be fixed but no,it is exactly the same,I am going bald way to quick as It Is,I have this error in event log every time i restart or disable/enable local connection .event id 1001Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x001EC93E0D7B. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.Also this one :The Mobile IP Route Manager service failed to start due to the following error: This driver has been blocked from loading The DHCP allocator has disabled itself on IP address 169.254.149.243, since the IP address is outside the 192.168.137.0/255.255.255.0 scope from which addresses are being allocated to DHCP clients. To enable the DHCP allocator on this IP address, change the scope to include the IP address, or change the IP address to fall within the scope.
Computer with new clean install of Windows 7 Home. Yesterday it was connecting to router via LAN (not wireless). Went to sleep last night and had to do hard restart to get it up today. Since then, it is not finding the router via error msg above. I went into Dev. Mgr and told modified Nertwork Adapters to not allow computer to put to sleep. Still same msg. It will connect via wireless but I want to LAN it.
View 6 Replies View RelatedHow to reset my raid configuration to normal after creating a Raid0 without failure from disk.
View 1 Replies View RelatedI have an HTPC that I've had for about 4 years now. Today when I booted it up it went into an infinite loop with the 'Startup Repair Utility" where it would just sit there claiming to be repairing the drive but never actually completing or providing a notification of the issues (typical Microsoft troubleshooting). Anyway, I finally was able to get into the advanced settings of the utility and get to a command prompt and see what was going on.
1)The previous RAID 1 configuration was setup as the main C: drive with the OS and also where I had all our music stored. But now during the boot sequence the bios startup it flashes in red complaining about the RAID array having degraded and when I finally got into a command prompt it was no longer mapped to C:, the two drives in the array were mapping independently as drive E: and F: respectively (the DVD-ROM is the D: drive).
2)My first concern was to get my music off it so I plugged in an external USB drive and went into command prompt and tried to xcopy from E:, it started to copy then failed catastrophically with a weird error so that would appear to be the bad drive. I then tried the same thing on drive F: (the mirror) and its cranking along nicely copying all my music over. My fingers are crossed but I suspect I'll be OK, its unlikely to get two drive failures in the same array at the exact same time
Once I get my data off the good drive how should I proceed? I assume I need to get a new duplicate drive installed and then can I not rebuild the RAID array from the good drive? I've never done this before, the machine came built for me so I'm not familiar how it is setup. What I do know is that it has a 'RAID utility' you can jump into at boot up by hitting F10.
i install windows 7 64bits on revodrive x2 but is working slow what is the problem what i did wrong?
View 5 Replies View RelatedI unchecked programs in ms-config following instructions on how to rid a computer of a virus. Had me uncheck all but files using "system". I must've unchecked a necessary file because now it won't boot at all. We don't have the cash to go to a professional around here.
View 2 Replies View RelatedI have a number of windows 7 machines set up in an office and all of them were set up the exact same way. All but two are having issues shutting down when idle. I have my power options set to do nothing but turn off the monitor. Shutting off harddrives, hibernate, and standby are all disabled:
I have 1 Admin account and 1 User account on each computer. The settings are the same for both accounts. Screensaver is set to "none." I have comodo antivirus installed. The only processes initialized at startup are intel common user interface, audio manager, comodo, itunes crap, and java.
Every time I rebooted my laptop windows runs through preparing to configure windows, then configuring the service pack, starting at 35% and finishing on 37% and then boots windows normally. This is very annoying to go through everytime I reboot. I ran the portable fix it program from microsoft to fix windows update problem but it I booted into safe mode to try uninstall the service pack to reinstall but now when it reboots it says preparing to configure windows, then failure to configure service pack, reverting changes. Now it does this every time.I've tried running windows updates to try to reinstall but it just seems to go on forever. I have also run the System update readiness tool from microsoft but it does the same as the windows updates, runs continuously
View 3 Replies View Related
