I unchecked programs in ms-config following instructions on how to rid a computer of a virus. Had me uncheck all but files using "system". I must've unchecked a necessary file because now it won't boot at all. We don't have the cash to go to a professional around here.
View 2 RepliesPC boots normally, though somehow slowly � you can really hear the HD is working hard! Wireless is connected as it should, as one of the last tasks in the entire start up process. Good signal with 4-5 pins in the internet access icon down in the right corner of the lower menu bar, and no problems with connection to the internet. However, after 1 minute or so, I can hear the HD start working intensively again, and then it disconnects the internet access, shown by a red cross over the internet access icon. Just before that, the screen flashes a bit, and the color of the lower menu bar becomes slightly more pale, as if some booting is still going on. Going into the Services.msc, the WLAN Auto Config says that it is started, but opening it in �General�, it says Stop. When I click on Start, it reconnects and works fine again. If I do nothing, after yet another 2-3 minutes it tries to reconnect, and eventually after 5-8 minutes after reboot it is reconnected, and work fine again. I off course use Antivirus program (Microsoft Essentials) and have installed all the latest Windows 7 updates, including SP1.
View 4 Replies View RelatedI have an Acer Aspire one. It came with XP and I have it dual booting into Windows 7 which is working well which I installed from a USB Drive as this model doesnt have a CD Drive.
In the main boot screen it says "Earlier version of Windows" For XP and "Windows 7" for windows 7. All was working well until yesterday...
Now I can't boot into "Earlier version of Windows" i.e. XP. It gives me the C:\windows\system32\config\system is missing or corrupt message. I can boot into Windows 7 fine but all of my work stuff is on the XP platform (I know I can access the files from "7" but I need to get it operational again).
Any ideas? Can I do a repair from the USB Drive?..I've tried a couple of things to boot from the USB Drive but to no avail. And I can't find the BOOT.INI file from XP (I think it gets moved to Windows 7's hidden boot partition when I installed it. I cant seem to access that partition either).
My windows taskbar is no longer visible whenever I open up a site on the internet. The taskbar is locked and auto hide is unchecked. I'm using Internet Explorer 9 and windows 7 lite. The toolbar just suddenly stopped appearing at the bottom of webpages. It still appears on the main screen but not on any webpage!
View 8 Replies View RelatedI'm not able to rename folders. I go to properties and unchecked "Read only", but it does not change this attribute at all.
View 4 Replies View Relatedhow to remove unchecked services completely (DELETING) from the services tab in msconfig? Like Google update service and so on.
View 9 Replies View RelatedYesterday i found out that my rear and centre speakers were producing really low sound. After a restart, Windows lost the ability to set it on 5.1 speaker config. It would just revert back to 2.1. I did a reinstall of the drivers but no luck.
PC Specs:
Intel i5 750 @stock
4GB RAM
SB Audigy 2 ZS
Windows 7 x64
Logitech X-540
i have window 7 test version installed however When i tried to install Act of war: Direct action, it didn't work and since i have herd how the game does not like more than 3 GB of rams i change the MSconfig settings and set a limit on the memory from the Advance options after i restarted my computer it crashed...and i am unable to undo the msconfig changes, because i am unable to access msconfig i have tried to boot into safemode and load msconfig, however it says i do not have the privileged to access msconfig...i have tried the automatic repair in window 7... and it didn't work anyother ways to undo it?i have a lot of accessments in the C: drive which i have not backed up?
View 19 Replies View RelatedI config my host file to go facebook (my country prevent me to go there ) and It work probably to one day... I cannot go to facebook, and I checked my host file again. It's still no change from that time, but there is a small thing: host file now has a key icon at left-bottom. (That I'm sure it doesn't appear before).
View 2 Replies View RelatedOS installed on SDD ..(Windows 7 Ultimate 64bit) I have a seperate 1TB HDD installed - partioned into 2 volumes. (D & E) I would like that the OS puts all programs by default onto D:I know some programs give you option to select location but not all ... can I setup that 'progam' folder is on D.
View 8 Replies View RelatedI just upgrade from bulid 7000 to build 7057. when i try to connect to the Internet it gets connected but when i try to surf no page loads. when i clicked on diagnose problem it says my comp doesn't have a valid ip config, wat do i do
View 7 Replies View Relatedtried to install another 80gig seagate sata drive
it installed o.k and in my computer shows disk d,I only want to use this as storage,but whenever i download anything and want to send it to d it isn;t in the drop down menu,its showing in the sidebar i can drag the files across into d and works o.k.but am mystified why i cant get it in dropdown.have formatted drive,in the disc manager it shows healthy and active.
by the way i think windows 7 is running great couple of teething troubles but o.k
I am running windows 7, I was able to connect to the internet via WiFi the whole time, now I am unable to do so. I have bought a new Lenovo laptop and I am now having a problem that tells me "invalid IP config" the whole time.
View 10 Replies View RelatedI looked in System Configuration on my W7 Ultimate.....There are 80 systems running. Which ones can I shut off to make my pc run faster with W7 and not mess it up. This is just after I rebooted I didn't have anything open yet. [code]
View 6 Replies View RelatedI want ALL my folders to show content as details.Even if they are pictures.How do I do that?Tried the folder options in the Config Screen (sorry, trying to translate from Dutch) but that won't work, plus I'm in a wrong folder, because that's one of the few I want to see as icons.
View 5 Replies View Relatedamd athlon x2 6000+Broadcom netxtreme 57xx gigabite controller (integrated)Fresh Install today.(no updates or sevice pack on yet)I have had this problem for about 4 months now,It started when i put my daughters xp laptop into the local connection(I use a 3 dongle to connect to Internet always have and never had any trouble,shared connection).I got xp working on my network no trouble,the trouble began when i switched off and went to bed.The next morning I replugged my xbox 360 into the local adapter and got the unidentified connection,to cut a long story short I have tried all fixes I could find on the Internet but nothing worked,so I manually assigned a ip address in the ip4 properties and everything i put on local adapter now works but it still says public unidentified network.
So today I formatted and re-installed windows 7 expecting this problem to be fixed but no,it is exactly the same,I am going bald way to quick as It Is,I have this error in event log every time i restart or disable/enable local connection .event id 1001Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x001EC93E0D7B. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.Also this one :The Mobile IP Route Manager service failed to start due to the following error: This driver has been blocked from loading The DHCP allocator has disabled itself on IP address 169.254.149.243, since the IP address is outside the 192.168.137.0/255.255.255.0 scope from which addresses are being allocated to DHCP clients. To enable the DHCP allocator on this IP address, change the scope to include the IP address, or change the IP address to fall within the scope.
Computer with new clean install of Windows 7 Home. Yesterday it was connecting to router via LAN (not wireless). Went to sleep last night and had to do hard restart to get it up today. Since then, it is not finding the router via error msg above. I went into Dev. Mgr and told modified Nertwork Adapters to not allow computer to put to sleep. Still same msg. It will connect via wireless but I want to LAN it.
View 6 Replies View RelatedHow to reset my raid configuration to normal after creating a Raid0 without failure from disk.
View 1 Replies View RelatedI have an HTPC that I've had for about 4 years now. Today when I booted it up it went into an infinite loop with the 'Startup Repair Utility" where it would just sit there claiming to be repairing the drive but never actually completing or providing a notification of the issues (typical Microsoft troubleshooting). Anyway, I finally was able to get into the advanced settings of the utility and get to a command prompt and see what was going on.
1)The previous RAID 1 configuration was setup as the main C: drive with the OS and also where I had all our music stored. But now during the boot sequence the bios startup it flashes in red complaining about the RAID array having degraded and when I finally got into a command prompt it was no longer mapped to C:, the two drives in the array were mapping independently as drive E: and F: respectively (the DVD-ROM is the D: drive).
2)My first concern was to get my music off it so I plugged in an external USB drive and went into command prompt and tried to xcopy from E:, it started to copy then failed catastrophically with a weird error so that would appear to be the bad drive. I then tried the same thing on drive F: (the mirror) and its cranking along nicely copying all my music over. My fingers are crossed but I suspect I'll be OK, its unlikely to get two drive failures in the same array at the exact same time
Once I get my data off the good drive how should I proceed? I assume I need to get a new duplicate drive installed and then can I not rebuild the RAID array from the good drive? I've never done this before, the machine came built for me so I'm not familiar how it is setup. What I do know is that it has a 'RAID utility' you can jump into at boot up by hitting F10.
i install windows 7 64bits on revodrive x2 but is working slow what is the problem what i did wrong?
View 5 Replies View RelatedI have a number of windows 7 machines set up in an office and all of them were set up the exact same way. All but two are having issues shutting down when idle. I have my power options set to do nothing but turn off the monitor. Shutting off harddrives, hibernate, and standby are all disabled:
I have 1 Admin account and 1 User account on each computer. The settings are the same for both accounts. Screensaver is set to "none." I have comodo antivirus installed. The only processes initialized at startup are intel common user interface, audio manager, comodo, itunes crap, and java.
I have windows 7 installed on laptop, i had to install XP on a partition in order to do something i cant in w7, now xp starts..I used to know of a program that could be run from within windows that would let you add OS's to the boot menu and choose a default but i cant remember its name, it was dead simple to use other stuff I see is more complicated, i just want to use that simple little program.
View 9 Replies View RelatedHow can I make windows auto boot to a program, withoutthe need of using the user interface, etcI heard of something like c:/autoboot.iniAlso is their a possibility I can easily make itskip Windows logo loadup sign, and go straight to the program?
View 7 Replies View RelatedI have a little program that I want to load and run at the start up of my Rig, how do I do this? Is there some folder I have to put it in ? If so which one and where is it ? I have looked for a start up folder but can't see one any place.
View 4 Replies View RelatedEvery time I rebooted my laptop windows runs through preparing to configure windows, then configuring the service pack, starting at 35% and finishing on 37% and then boots windows normally. This is very annoying to go through everytime I reboot. I ran the portable fix it program from microsoft to fix windows update problem but it I booted into safe mode to try uninstall the service pack to reinstall but now when it reboots it says preparing to configure windows, then failure to configure service pack, reverting changes. Now it does this every time.I've tried running windows updates to try to reinstall but it just seems to go on forever. I have also run the System update readiness tool from microsoft but it does the same as the windows updates, runs continuously
View 3 Replies View RelatedEvery time I rebooted my laptop windows runs through preparing to configure windows, then configuring the service pack, starting at 35% and finishing on 37% and then boots windows normally. This is very annoying to go through everytime I reboot. I ran the portable fix it program from microsoft to fix windows update problem bI booted into safe mode to try uninstall the service pack to reinstall but now when it reboots it says preparing to configure windows, then failure to configure service pack, reverting changesNow it does this every time.I've tried running windows updates to try to reinstall but it just seems to go on forever. I have also run the System update readiness tool from microsoft but it does the same as the windows updates, runs continuously
View 7 Replies View RelatedI have spent the last couple of hours going through each GPO setting to disable as many features for my kids account on Windows 7 ultimate. I saved the file as kids.msc. The only issue is that I want to be able to clear these settings when needed, so that i can fully access the features. I could not find any options in GPO that allows you to reset the settings back to default...
View 9 Replies View RelatedI tried to allow my windows 7 laptop to print over the network, and after 3 hours gave up as nothing seemed to work. I must have done something because now I cannot connect to WiFi at all or Ethernet. It says on the system tray Not connected and below that connections available, and under wireless network connection it says it is connected to my wireless connection but I cannot connect.
View 2 Replies View Relatedsince I installed Windows 7 on my computer, I've been having trouble connecting to the internet. I have a wired connection to a Belkin router. I have the latest firmware for the router.
When I start my computer, sometimes it will automatically connect to the internet, however most of the time it doesn't. I see a yellow exclamation point over the networking icon at the bottom, which says "Unidentified Network - No Internet Access".
The only way to solve the problem is by running troubleshooter -- numerous times. When the troubleshooter doesn't work, it says "Local Area Connection doesn't have a valid IP Configuration". I then have to repeatedly troubleshoot, or disable and enable my internet. The troubleshooter "Resets the local area connection adapter" - which works sometimes, but sometimes it doesn't.
Other times, it connects to the Belkin router, but says that there is "No Internet Access."
I have disabled the Bonjour service, which was a suggestion I saw in previous threads.
I just installed Win 7 and I have a 7.1 setup, but my subwoofer is not working. I'm pretty sure it's a driver/config issue, because all wiring is OK and it was working on XP some hours ago. I have an Audigy 2 ZS, but I also tried my onboard Realtek High Definition Audio, but the subwoofer does not work.
Anyone experiencing that / any tips for me ?
Edit: So, anyone got the Audigy 2ZS to work yet?
Just built new system MoBo is a MSI P67a-GD65 HDD is Western Digital 10ealx plugged in with the proper 3.0 ata cable, Windows 7 64bit OS. The problem lies in Windows keeps telling me that the current driver isnt compatible and to go to Marvel for more current drivers/software , yet when I go there there is not 1 single download available (that I can find) to correct this issue.
View 1 Replies View Related