Marvell Yukon Gigabit Ethernet Freezeing Every 15 Mins
Jul 30, 2009
Earlier many reported this problem with win 7 x64 build 7100, now I did a clean install of build 7600 x64 & the problem is now more frequently happening every 15 mins it freezes the comp.
Uploading stops
downloading sometime stops
sound/video freezes
applications stop responding
nothing can be done to the system at that time.
I am using asus P5B dlx wifi mobo with Marvell Yukon Gigabit Ethernet lan drivers latest v 11.10.6.3 dated 6/15/09.
Is there any solution to this I am pulling my hair due to this issue & cant use the comp.
View 9 Replies
ADVERTISEMENT
Jun 7, 2009
Been pulling my hair out for a few days trying to solve an unidentified network problem with my Marvell Yukon 88E8052 . Tried all the fixes I found on the web and nothing worked. I finally did an ipconfig all and noticed the MAC address reported was totally bogus (something like F0-00-00-00-00-00). I went into adapter settings - advanced tab and configured the network name (MAC address) manually. As soon as I did that windows recognized the network and asked what type it was. I've been golden ever since.
View 1 Replies
View Related
Apr 19, 2011
I have lost all sound, any idea if updated the Marvell driver
View 1 Replies
View Related
Aug 20, 2009
I was browsing my Event Viewer when I ran across a series of Event 101 errors, all re: the Marvell Yukon 88E8001/8003/8010 PCI Gigabit Ethernet Controller. There would be a series of identical errors, 6-8 in a row, all with the same time stamp. They repeated once a day, sometimes twice, going back weeks. I never noticed a problem with my Internet connection.
I have a wired cable connection. The power has been going out frequently, because of storms. Could that cause the error messages?
View 1 Replies
View Related
Feb 17, 2011
I have a pentium 4 pc that had built in ethernet on the mobo, i replaced it with a gigabit ethernet.I did a speed test at speak easy with the built in and got 60ish mb. I disabled that device and used the gigabit and i got 38mb with or without jumbo frames 7k.I performed the test 4 times with similar results. I have updated both cards with the latest drivers via win update.
View 4 Replies
View Related
May 12, 2009
I'm out of ideas. Tried several different drivers, and settings. Using a fresh install of Windows 7 RC. The drivers all seem to "work", by which I mean Windows 7 has no problem with them, but no driver I've tried will let the card actually talk with anything. It keeps trying to find a DHCP address and always comes up with a 169 address. Even when I specify a static IP it still won't see anything on the network.
DHCP is working for my on board NIC, and this card works in my XP installation on this same PC.
The driver that seems to "work" the best so far is this: Download HP Intel PRO/1000 Gigabit Driver 13.5.00 Rev.C for Vista64 Driver for Windows Vista64 - Softpedia
With that driver I actually get all of the nifty features in the driver properties page, and I've run all of it's diagnostic tests which all come up green.
Also worth nothing: I had this same problem with Windows 7 Beta.
View 9 Replies
View Related
Dec 5, 2011
getting drivers for Realtek RTL8168/8111 PCI-E Gigabit Ethernet NIC?
View 2 Replies
View Related
Jan 18, 2012
I am looking to update my drivers and can`t get the exact one that I require
View 1 Replies
View Related
Feb 28, 2012
New driver for Windows 7 Pro 64 bit. Up grading from Windows XP Pro to Windows 7 Pro 64 bit. Which driver do I need. The windows advisor said I need to up grade the driver?
View 1 Replies
View Related
Feb 28, 2012
I am Going to up grade my system to windows 7 pro 64 git from windows XP pro. It says I should download the latest driver for realtek RTL8168/8111 PCI-E gigabit ethernet NIC and save the Driver. How do I know which one to download?
View 2 Replies
View Related
Jul 29, 2012
i want drivers of toshiba satellite c660-c18
View 1 Replies
View Related
Jan 20, 2013
i need a driver for this Ethernet adapter
View 2 Replies
View Related
Dec 19, 2009
Where can i get drivers for Marvell 614x for win7 ?
View 6 Replies
View Related
Sep 9, 2009
I'm using a Marvell Yukon 88E8053 Gigabit adapter. When I installed 7 and logged in for the first time, my ethernet did not work. I had to use a USB drive to get drivers to install it. So, I get it installed and working and then I add the PC to my domain, log in with a domain user and it cant even find the DC to authenticate to!
I log back in with the user on the workgroup and find that the ethernet is not working. I look under device manager and the "Network Adapters" node is not even there! I try to install the Marvell adapter and ony Intel adapters are listed. When I try to "Add Legacy Device" and use the drivers for my Marvell, it won't even display a list to choose a model from, so at this point I'm pulling my hair out. I reboot, log in with the worgroup user and the network card shows up; OMG.
At this point I can finally log in with the domain user. I'm installing a bunch of software and I finally stop and let the system lock the computer. I come back, log in and guess what, no stinkin adapter; not even in device manager. Looks I have to reboot every time this happens. I just set the power options to High Performance, so hopefully I can get past this issue for now.
Anyone else having this problem?
View 0 Replies
View Related
Apr 18, 2012
My system is slow to load and no real problem with using the internet. It's just when I play BF3 online my system crashes hard sometimes and powers off or I get real slow fps/ freezes up and I have to shut down the pc to get out. Windows tells me the hd controllers driver (Marvell) is not compatible with windows 7, that everything is bottle necking at the controller and suggests I go to the OEM site for an updated, compatible driver. No luck there. No driver and they claim that hd is compatible with Win 7. The hd is a Western Digital, WD 5000 AADS, 500 gig, 32 mb SATA 3. End of the road? Do I have to buy a new hd that has drivers that are compatible with windows 7?
View 5 Replies
View Related
Jun 9, 2011
Just built new system MoBo is a MSI P67a-GD65 HDD is Western Digital 10ealx plugged in with the proper 3.0 ata cable, Windows 7 64bit OS. The problem lies in Windows keeps telling me that the current driver isnt compatible and to go to Marvel for more current drivers/software , yet when I go there there is not 1 single download available (that I can find) to correct this issue.
View 1 Replies
View Related
Jun 8, 2011
Intel Core i7-960 3.20GHz LGA1366 CPU BX80601960
MB Intel BOX DX58OG
PSU Corsair 600W
MEM 4G KST KVR1333D3/4GR x3
EVGA GeForce GTX 560 Ti
Western Digital 500 GB SATA 6.0 GB-s Internal OEM Drive WD5000AAKX
Western Digital 2 TB Caviar Black SATA 6GB/s Internal OEM Drive WD2002FAEX
Just built this machine. Installed Windows 7 on the 500GB drive. Both drives are plugged into the blue SATA 6GB ports on my board. My drivers for these controllers are Marvell 91xx SATA 6G v1.2.0.1002 (Dated 3/7/2011). The second 2TB drive shows up in BIOS as well as Drive Management in Windows, but it will not be recognized as an accessible drive that can be formatted, partitioned, or anything. I get an error each time I attempt to format or partition through Drive Management. When I plug the 2TB drive into one of the other (black, Intel) SATA ports, the drive works fine, but in the blue ports it just won't seem to work. The 500GB drive, however, works perfectly as the boot disk in these ports.
View 9 Replies
View Related
May 19, 2009
Intel D975XBX2 Marvell SATA driver needed for Windows 7
Installed Windows 7 (62 bit) onto Intel D975XBX2 ATX Motherboard.
I can not get windows to recognize the SATA drives attached to the internal Marvell card.
BIOS see the drives, just not windows.
Attempted to install both Windows XP 64 and Vista 64 Intel drivers (STOR_allOS_8.7.0.1007_PV), but the install fails with "system does not meet the minimum requirements)
Any Ideas?
View 8 Replies
View Related
Apr 9, 2011
I am using an Asus P6T Deluxe V2 motherboard and Windows 7 Professional. I am having a problem with my external (esata) disk drive being recognized by the OS. It used to work and now it don't?? During boot up I see the drive in the bios messages on my screen. Also when I look in device manager it shows the drive and says this device is working properly. However, when I click on "computer" its not there and no software program such as backup finds the drive either. I have tried uninstalling the drive in device manager and then rebooting. No luck? I am not sure when it quit working or why. Its not the drive as I have tried more than one and they are recognized when used in the USB port. I have uninstalled the Marvell 61xx RAID controller in the device manager also but no change?
View 10 Replies
View Related
Dec 15, 2011
I can�t get anything faster than 5Mbs transfers over my network. This is what I have connected. I�m using a Dlink DIR-655 Router, set to connect at 1Gbps, Western Digital NAS drive, it says it�s connected at 1Gbps, and my laptop is set to connect at 1Gbps also. My laptop has a Realtek NIC, with the lastest drivers that I can find. Every thing is set to 1Gbps and, they all connect at that speed, but transferring between my NAS and my laptop, I ONLY get right at 5Mbs. Everything is connected with Cat5e cables, no long runs or anything. I�ve looked at several forums to figure out what I can do to get higher transfer speeds
View 1 Replies
View Related
Jul 20, 2012
I noticed that my drivers for this nic card are out of date somewhat. 2009 version.However thats not my problem thats immediately effecting my computer. Delayed or halted shutdown. runnin win7 64 bit raid 5 just installed Kasp pure 2.0 however i dont think thats the problem as i had pure 1.0 before this.
View 2 Replies
View Related
Oct 26, 2011
I have a Dell XPS 15Z with gigabit ethernet port, have dgs 1005d gigabit switch and WDTV live hub also with gigabit "capability"... The network cables should be fine...
The issue is that the file transfer (these are usually HD movies) from my laptop to WDTV are rather slow having in mind it's a gigabit network connection... The speed tops 15 MB/s. Same thing if I connect WDTV directly with my laptop.
The switch indicates (green light) it has set-up a gigabit connection both with WDTV and my laptop.
I have disabled autotuning, RDC, AV software etc. Tried with jumbo frames, disabling flow control - EVERYTHING
View 4 Replies
View Related
Mar 15, 2012
My Linksys WRT120N router no longer works, so I bought a D-Link DIR-655, which has Gigabit ports.I have a PC with Win 7 64-bit with an Atheros L1 Gigabit Ethernet built in the motherboard, an ASUS P5B-VM SE. I also have 4 GB of RAM and internal hard disks connected via SATA 2. The PC is connected to the router via a Cat 5 cable with the label "Type CM24AWG UL E188L30".I also bought a Buffalo Linkstation Live LS-CHLV2 NAS with a 2 TB HD, and it's supposed to have a Gigabit port, too. The NAS is connected to the router via the Cat 5 cable included with the NAS.I checked the settings of the Atheros, and it uses "auto" for the media type (other choices range from 10Mbps Half Duplex to 1000Mbps Full Duplex. The maximum frame size is 1514 (the default), and the receive and transmit buffers at 256. There is no "jumbo frame" property in the configurations.The NAS only has frame size for the configuration, and it's currently set at 1518 (the default). Other options are 4102, 7422, and 9694 (all labeled as "jumbo" frame sizes).
I ran LAN Speed Test from the PC with a folder in the NAS as the destination, and the results for a 100-MB file are 34 Mbps for writing and 71 Mbps for reading.I experimented by setting the Atheros media type to 1000Mbps Full Duplex and the maximum frame size to 9694. I went to the NAS and set the frame size to the highest, 9694. The transfer speed became worse.I could not find any settings in the router except for MTU for Internet connections, but I think that's not used for network file transfers, so I did not change it (the default is 1500).I would like to know if the system and components I have are supposed to be enough to do file transfers between the NAS and the PC that are faster than the results I've gotten.Also, is it necessary to modify Ethernet configurations?Finally, I do not what else to do except to do the LAN Speed test using the ff. options:
1. connect the NAS directly to the PC
2. connect to another PC, probably a laptop, that has Gigabit ethernet and is connected to the router
3. buy two cables that are identified for Gigabit networks and to replace the ones connecting the PC and the NAS to the router
View 6 Replies
View Related
Sep 30, 2012
a friend of mine now has a gigabit connection but can only get 400Mb download when tested via speedtest.net. while the engineer was installing everything he noted speeds of 700Mb on the laptop used for the setup.
would the lower speeds be due to the realtek network card he has?
View 3 Replies
View Related
Nov 3, 2009
I am having networking issues with Windows 7 Pro. I did a clean install on Saturday from Windows XP and started having issues staying/getting connected to the internet with my motherboard's (ASUS A8NVM-CSM) on board Nvidia nForce networking controller. After seeing that others were having the same problem, I bought a new card, Dynex Gigabit PCI Card which installed perfectly and disabled the other one. Now I'm running into issues of my connection dropping sometimes every 5, 10, 20 minutes and the only way to get it back instantly is to do ipconfig /renew.
When I do the troubleshooter, it tells me there's something wrong with the connectivity of my modem or router, which is impossible. I say this because I live with roommates who are all using different operating systems (Vista, XP, Mac OS X Leopard) and they haven't had connection problems either. There are two routers in the house, a Netgear and a Cisco, and I haven't a problems with either of those when I was on XP, and my roommates aren't having issues with it either.
Any ideas or settings I might be able to change on this card? I've tried drivers and changing cables out, making sure Windows doesn't turn off the network card to save power...etc. Let me know if you need more information.
View 2 Replies
View Related
Dec 12, 2012
a week before i formatted my c drive and installed win7 ultimate and comodo free antivirus.i was using bit torrent too for movie downloads.system was runnin all night and the next day morning my bit torrent went blank !!!!there was no downloads in queue..i doubted for some virus and tried to give a full system scan but it was showing some error the next day it started showing some real problems..system went freezin after 5 to 10 mins..mouse ,keyboard, taskmanger..nothin worked.i uninstalled all softwares includin comodo and tried to reinstall windows.reinstalling win7 was more diificult..it will freeze in between..after several shutting down and starting again using power button i successfully installed win7 and its drivers..but still the problem persists..1st i thought my HD went down but its workin in safe mode,only one time the system freezed wen i tried to open in safe mode.
View 3 Replies
View Related
Aug 25, 2011
I have a PC I purchased in September 2010. Its a reasonably high spec Intel i5 760 (overclocked) running Windows 7. It been working fine up until yesterday when I decided to reboot as there were one or to windows updates required.The PC did reboot but only after 40 minutes spending most of that time with 'Starting windows' logo. When it does eventually boot everything seems to work well apart from itunes which also takes 30 or 40 minutes to start.
View 4 Replies
View Related
Jan 10, 2012
This has been ongoing for 1 year. Im finally sick and tired of it. I accidentally stumbled upon this forum and it looks promising! I get the BSOD randomly. Sometimes i'll let it boot up and not touch anything and BAM BSOD out of nowhereHere is my Spec:- Windows 7 Premium Home 64-bit from Ibuypower.com- the original installed OS on the system? yes- an OEM or full retail version? OEM- What is the age of system (hardware)? 1 year (Bought in June )2011- What is the age of OS installation (have you re-installed the OS?) reinstalled twice. the first day i booted up my new omputer, i got the BSOD.
View 6 Replies
View Related
Sep 28, 2011
when I boot up my computer it stays in a black screen for about 3 minutes then moves to the logo screen where it stays there for another 3-4 minutes then finally gets to my desktop.I have a hunch of what it has to do with but could be wrong.I ran diskeeper (defrager program) and it mentioned something about sound driversI just went along with it and just ran it (foolish now I know)Ever since it has finished and I went to turn on my laptop again this boot up lag hasoccurred.
View 7 Replies
View Related
May 13, 2009
On a Laptop with 4G RAM and Dual T7250 CPU install time for Clean install of Rc x-64 build 7100 took just over 15 Mins when booted up from a USB stick .
OK I have to install applications and find one or two drivers etc (you always have to do that anyway) but the "Base" install really didn't take long at all.
Maybe a USB should be an "Optional" install medium.
Was a great trick to run the "BOOTSECT" command from the "Install" DVD to get the bootsector on to the USB disk.
Now I've got a nice fast portable method of installing from a USB stick.
Now to see if it works on a Netbook with no internal DVD drive.
-- It does -- but beware there's no Prompt on the boot so if you re-boot during the setup it will start again from scartch so remove the USB stick after the first boot and insert it again quickly before the setup continues. I.E insert the USB stick again at the boot splash screen.
View 0 Replies
View Related
Sep 19, 2012
My friend has an HP Presario notebook which she is having trouble with and asked me to take a look at it.In short, its Win 7 x64 Home Premium with 2GB RAM and an Intel Celeron CPU (i forget which model of CPU).Unit boots fine, and logs on, but what struck me was it was very very slow. brought up task manager and checked the performance tab and the CPU was fluctuating between a relatively low level of 4% - 10% but sometimes did shoot up to 50% - to be honest, with it being a Celeron I kinda figured this could be "normal" as its not exactly a brilliant chip. - other opinions welcomed on that pointHowever, the Memory usage as up at 1.35GB and continued to rise to 1.89GB - the machine only has 2GB of RAM and it literally took about 10 minutes to do anything.
I did the usual, Malwarebytes Anti-Malware scan - found nothing - Removed the rubbish Norton and installed MS Security Essentials - scanned - found nothing.Removed any and all of the HP Cackware and anything else that looked odd. The finally I removed a lot of rubbish from the MSCONFIG.Rebooted the machine and checked Task Manager again - this time, instead of 88 processes running, I only had 63 running - but yet again, RAM usage was up at 1.35GB. The HDD is not full and has plenty of space.So I felt stumpedDid some reading online and set the value to 1 in the registry.After changing the ClearPageFileAtShutdown value, when I booted back into Windows, the RAM usage was down to 837MB and fluctuated upto abour 1.3GB thought I had sussed it. So one more time I ran MS Security essentials for one last scan - it again found no issue but immediateley after doing this, the RAM usage shot right back upto 1.89GB and above and the problem instantly returned.
View 7 Replies
View Related
