System Drive
Nov 24, 2009
when i go to create a system image for some reason when i go to select the partitions and drives to back up i have the normal system drive automatically selected which is normal
but now for some reason it is treating my 1 terabyte hard drive as a system disk as well which it is not. which means i cannot remove the tick
when i go to the disk management and delete the volume and then recreate the volume again its not part of the system disks and i can make my backup if i do it within about 5 minutes of recreating the volume other wise it is treated as a system disk again
as far as i know i have done nothing different this time to any other time i have reinstalled seven
i am dual booting 2 sevens as i was going to delete the old install which i haven't yet and when i boot into that one the 1 terabyte drive is not part of the system disks
View 3 Replies
ADVERTISEMENT
Mar 21, 2012
I recently reorganized my computer and this included a fresh install of Windows 7 on a new disk. I backed up all my data on the old disk so that I could make sure I wasn't losing any important documents or whatever.I'm now sure I've got everything off the disk that I needed and am using the disk as a storage disk for media. However, there are still folders that I can't seem to erase in the Program Files, Program Files (x86), and Windows directories. Most of the files are gone but about 12GB of junk remains that I no longer need. Whenever I try to delete what is left, it says I need permission from TrustedInstaller and it won't let me delete these files.Is there any way to blow these directories away without having to format the disk? I really can't format because the disk is almost full with data that I need to keep and I don't really have any other disks to temporarily back these files up to.
View 6 Replies
View Related
Apr 30, 2012
I have a WIN -7 system with 1 trig SADA hard drive. I also have a Vista system with a 750mb hard drive from my old computer.Can I install the Vista hard drive into the Win-7 system and boot from either system?
View 1 Replies
View Related
Jul 6, 2012
Would it be possible to download (My Documents) from my XP 32 bit system to a flash drive and load it in my Win.7 64 bit system?
View 3 Replies
View Related
Feb 18, 2012
My C: dreive is a 128GB SSD which devided into 70 and 50 GB.Windows and all programs are installed on 70GB, the 50GB drive is free.All programs are about 11GB, Win7 ultimate 64 is about 17GB so all together it should not exceed 30GB. Suddenly I found on one day that my user folder became 25GB without any reason. When looking into it and calculated all subfolders it even did not come to 1GB.So the C drive is almost full and I have no idea for the reason.
View 9 Replies
View Related
Sep 17, 2012
My 750gb hard disk is failing on a HP laptop that came preloaded with Windows 7 home prem. I have a SMALLER excellent 500gb, 7200 rpm hard disk that I'd like to replace the failing hard disk with. I've read that my Windows 7 System Repair DVD will not restore my recent system image (on NAS) to a smaller partition. The C:partition on the failing drive is well over 600gb but can shrink to 300gb. QUESTION Can I restore a system image from my larger drive "as is". If not, and I shrink my C: partition (contain windows) ay 350GB will I be able to restore the system image to where windows will boot?I have an old copy of (7.0) partition magic that I used to resize partitions on XP machines Can this old 32 bit partition magic safely resize my C: partition. If so, and I create a new system image can I restore it to the new disk?
View 5 Replies
View Related
Dec 18, 2009
I'm really hoping I find an answer to this question besides the one I've found on the internet a hundred times over (That's not a good idea, you shouldn't do it).
My question is: Is there a way to allow a user to create/edit files in the C drive (system drive), and in the Program Files contained there? Let's assume that this user is not only a local admin, but a domain admin as well.
The reason for this is I work for a company that does a lot of editing within these areas of Windows. We need to be able to create and edit files where they are stored. I know one way around we've found is to copy the item out of the folder, edit it, and put it back, but this is a pain in the butt.
I also know that most program need to "run as admin", so that's not the problem either. I've given this user every right and permission in the Security tab of the C drive, and had it propagate down through all files, folders, and sub-folders, and still I'm hit with an error that says "Access is Denied" or another one saying that I don't have the right privileges.
Please, if anyone knows how to change this in 7 it would be much appreciated. I know that this worked in XP, and I'm not looking for someone to tell me "this is a bad idea so don't do it", or "maybe it didn't work right in XP". I have seen enough of these.
UPDATE: I have been playing around with saving office and wordpad documents into the C drive, and into the Program files. It seems that I'm able to do both now (for some odd reason), but I still receive intermittent errors when trying to edit or copy/paste or cut/paste from one location to another.
View 5 Replies
View Related
Jan 18, 2013
I decided to just revert to my old XP64. At first I was gonna try to dual-boot, but the fly in the ointment was all I had was an image on my external HD, which has about 100G of other stuff on it. My disc drive would not for the life of me burn an ISO image on any of my three DVD types. And the process of trying to find how to fix the drive problem and/or create just a bootable PARTITION on a HD without effecting everything else just drove me insane...which is kind of where I am now. After a week now I just have to get back to my project. lol And if that means no fancy windows 7 internet experience..while attempting a dual-boot scenerio workaround, I shrunk partition C and created a new 5G partition at the end of it. In EaseUS, I assigned it letter B and I set it to active, figuring it was to be bootable (wrong, I know). Additionally near the same time in Folder Properties, I unhid system files, folders...etc.
NOW the System drive showed as F! Then, attempting to use EasyBCD, it told me it could not find the BCD files to begin. So, naturally it had to do with that.I thought maybe it should have been B, but why would Ease US give me that letter option?After showing Easy BCD the file it seems to be OK....there. Also in Startup & Recovery it is listed in System Startup as the default system. But is it OK?Also, should it also be active. Did I inadvertently switch it by making the new partition active? What should I do to get it to boot properly. I AM planning on booting XP from a flash drive anyway, but still.
View 2 Replies
View Related
Sep 30, 2012
I have a 1T SATA system drive and a 1T SATA working drive. I installed a 3T SATA storage drive, and now my system won't boot from the C:. I have to go into the BIOS and boot from there, or use a boot disk. How do I get the system to boot from C: again?
View 3 Replies
View Related
Aug 19, 2012
i have a (spinning) hard-drive with my windows 7system and data on it. it is up to date to this month. the hard-drive is a 320gb. there is jsut 69gb used on the 320gb.i just bought a 256 gb SSD (solid state HD). i would like to place everything on the 256 and put IT in my laptop. i have saved a system image of the 320gb on DVD. windows seems to want an exact size (320gb) to restore the system to.
View 10 Replies
View Related
Aug 11, 2010
My primary system drive where Windows 7 is installed is a: WD 7K 16M SATA2 WD3200AAKS HD 320G - OEM. Long version (feel free to scroll down to short version): Yesterday, I came back to my computer, and all of my applications and desktop were frozen, but I could move the mouse. When I clicked on a window, the cursor would turn to the blue spinning thing, and the window would eventually say not responding and turn a lighter shade of white. I couldn't click on the desktop of the start menu, so I did a hard reset. The computer then wouldn't pass the black "starting windows" screen. I did another hard reset, and it asked me if I wanted windows to try to repair start up. Soon after that, it asked if I wanted to restore windows, but when I clicked OK, I got what looked to me to be a memory error. Then startup repair seemed to do nothing for a few hours, till I got impatient and restarted the computer. I was able to get into Windows, and I scheduled a memory test, and reset the computer. Memory test ran and found no problems. I restarted and Windows loaded, but soon after my computer was laggy and the programs were freezing. So then I thought it may be a HDD issue, so I scheduled to run check disk on that drive, and reset. Check Disk found corrupt files and bad sectors. After that, I was able to load Windows normally, but when I tried to open MC7 for "Live TV", it wouldn't pass the searching for tuner stage, so I closed out MC7, and got an error message in the action center. So I ran chkdsk again. This time, windows wouldn't load after restart, so I went back into repair startup, and it seemed to have found the error really fast, restarted and everything seemed fine. I decided to run chkdsk one more time for good measure, and it had a couple more read errors and found more bad sectors. Now I have been running windows with no apparent issues yet.Short version, computer froze, ended up running chkdsk 3 times, had to repair start up, and now everything is OK for now, but obviously I'm worried about more harddrive failure. Here are my questions:
1)How troubling is this? Do I need a new harddrive ASAP, or can it run for years with a few bad sectors? Any further tests I could run?
2)If I am to get a new system drive, what should I get? All I have on it is windows and my programs. I have separate disks for data. I'm using roughly 32 GBs out of 298. Should I just try to get the same drive (same speed, same capacity), or is there a good upgrade and is it worth getting an upgrade (I don't need more space, but something that would help performance maybe?) or any good deals on sale now?
3) I bought my current (failing) HDD on 9/24/2008, and I'm pretty sure WD has 5 year limited warranty. Should I peruse that angle?
4)How should I got about moving/restoring this OS to the new drive?
4a) I have a half dozen Windows Image Backups saved. Should I just use an old one from before the failure, or should I try to create a new one now, even though the disk may be corrupt?
4b)Or is there a better program to be using than Windows backup and restore?
View 9 Replies
View Related
Apr 6, 2012
I had Windows 7 Ultimate 64 bit installed on a partition of my 1TB drive. I recently bought a 240GB SSD and installed Windows 7 Ultimate 64 bit there. I did a completely fresh install, since I needed to move things around on the original partition anyway. So basically, I put all the drives in (which was probably my first mistake) and fired it up and low and behold, it booted immediately from my original drive, despite the fact that I had set the SSD as the first boot option in BIOS. Grr.. Anyway, I ran the setup for Win 7, hoping that would resolve the issue and I now boot (sort of) exclusively from the new SSD and into the new install of Windows.
now that I've moved everything off the original drive that I wanted to keep (onto a 3rd drive) I want to delete the old Windows partition and merge it with some other unused space on that drive but it won't allow me to do that, since the old Windows partition is listed as the System drive, while my new Windows partition is listed as the Boot drive.The other strange issue that I came across... is that I went back into BIOS and removed the option to boot from the old drive completely and then it wouldn't even boot at all.It kept asking me if I wanted to make a floppy disk of the SATA drivers.
View 2 Replies
View Related
Jul 7, 2010
1) i installed new Windows 7 to drive E in addition to the original OEM Vista installed in drive C of my computer (drive D is the original OEM restore drive). i want to do a SYSTEM IMAGE to backup drive E only (because the windows with all my files I now use is in drive E) but there seem to be some boot files/system files also in drive C (which i don't want to use) and Windows indicate the SYSTEM IMAGE must include both drive C and E. how can i make drive E (the 2nd physical hard disk that the computer got) function exactly as "drive C" with ALL boot files/system in it. so that my SYSTEM IMAGE only includes drive E without wasting space to include the entire drive C which i don't use now. ( OR i am asking, if I can only copy/clone drive E, when both physical drives failed, i want to make sure my copied/cloned drive E alone can function to boot up windows. right now, it seems to tell me I have to backup/clone drive C as well for drive E when i don't even use drive C now).
2) my computer does not go to sleep mode automatically even i set it so. it keep turn on in normal mode. i don't know why. the BIOS indicated it is from march, 2010, so should be update. is there anything i can do to make it sleep automatically?
View 2 Replies
View Related
Oct 13, 2012
My c: is 128 GB and darn near full. I have Win7 and most used programs on it. My b: (179 GB of 500) has my libraries and less used programs. I have a single windows image backup of both B & C on an external drive.
For example if I purchase a 500 GB hard drive can I restore that image to the new drive? Will it partition the C from the B on the new drive or just show it as seperate folders?
Does the new drive have to be greater than the sum of the allocated/unallocated space on both drives even though the image is less than 500GB?
View 1 Replies
View Related
Mar 9, 2011
I'm running Windows 7 on a system with two hard drives. I have the OS and applications installed on one drive (SSD) and moved my user folder (documents, pictures, etc) onto a second hard drive. Well, that second hard drive died on me, so I have to replace it. My question: how should I go about setting up the new drive, so that the file structure is restored? I don't mean the lost data, just how to make it so my directories are how they were before, and recognizable by the OS.
View 1 Replies
View Related
Oct 1, 2012
I reinstalled windows 7, now it doesn't see the drive beside the system drive
View 1 Replies
View Related
Oct 25, 2011
So, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
View 9 Replies
View Related
Oct 31, 2010
I have a system drive on a workstation which is 1) removable, 2) contains 2 partitions - one for the sytem & data files, one reserved by the os.
I would like to use this drive and it's file data in an external drive case (SATA) connected to my notebook.
Will the notebook handle the external drive properly?
View 7 Replies
View Related
Jan 19, 2012
I am on Windows 7 Ultimate x64. I need to set up a full disk encryption either with TrueCrypt (preferably) or PGP Desktop.I have five hard drives inside my PC. The System Reserved partition (100MB) and the OS (C:) partition are on Disk 4. There are also D:, E: and F: partitions on that drive.I think in order to have a bootable encrypted system the system disk should be Disk 0 (and not Disk 4 as in my case). What should I do to make Disk 4 be Disk 0?Second question: having read a lot about other people's experiences with FDE, most of them suggest to get rid off the 100MB system reserved partition. Can I do it without reinstalling Windows? Can I merge it with C: partition on the active system?
Third question: my system disk (Disk 4) is a dynamic disk. It's not supported neither by TC FDE nor PGP WDE. I have to change it to basic. What's the best and easiest way?Another thing, I understand that FDE can be done only on systems with "legacy BIOS" and not other types of BIOS. My motherboard is Asus Sabertooth X58 - what kind of BIOS does it have (I can't find that info anywhere in the mobo's user guide)?I know it's many questions for the first post, but I am in hurry to encrypt the system and these obstacles seems insuperable to me. I have already asked elsewhere but I didn't get any useful info.I am sure this is the best community with excellent experts and I hope I'll find solutions to my issues here
View 9 Replies
View Related
Feb 8, 2013
my old laptop crashed recently, so i had the harddrive taken out and made into an external harddrive with all my data on it. when i plugged it into another laptop, it worked perfectly, i opened it up and looked through all my files and everything.now i have a [COLOR=blue !important][COLOR=blue !important]new [COLOR=blue !important]laptop[/COLOR][/COLOR][/COLOR] here, and when i plug in the external harddrive it opens and i have all my folders in front of me.. but they are shortcuts, such as G:Users and when i open it, it tells me the system cannot find the drive specified?
View 12 Replies
View Related
Sep 5, 2011
I'm running Windows7 Ultimate 64-bit. I went in to the control panel/System Protection to turn on Protection on the drive that contain my documents so I could use the "Restore Previous versions". When I attempted to do so I got an error stating "Could not apply settings for the following reason: THe Filename, directory name, or valume label syntax is incorrect"
View 2 Replies
View Related
Sep 3, 2012
I recently brought a new ssd disk because the old one was running out of space. Since I have created a system image I was of just restoring this to the new ssd disk but I have also brought some new ram as well and will install this too. Will this cause problems with using system image.
View 9 Replies
View Related
Oct 24, 2009
How do i format system drive, from windows?
can i use command prompt?
View 9 Replies
View Related
Oct 26, 2009
I have 3 hard drives on my laptop, i have vista on one, seven on the other and one with no OS on. After buying and installing seven today on a clear hard drive, and transfering everything of vista's hard drive onto my seven one, it was time to format vista.
Windows will not let me do this because of the dual boot setup, and the vista drive being shown as the system drive (see screenshot) can someone tell me how to change the system drive, so i can format my vista hard drive which isnt needed anymore.
View 4 Replies
View Related
Jan 1, 2010
What would be the easiest way to change my "System" - drive to C: ?
When I look at Disk Management the (Disk 0) Windows 7 Drive (C says (Boot, Page File, Crash Dump, Primary Partition) but not System.
the (Disk 1) (System) drive is F:
How could I change it to the (Disk 0) C: drive ?
View 5 Replies
View Related
Feb 18, 2012
My C: dreive is a 128GB SSD which devided into 70 and 50 GB logical drives.Windows and all programs are installed on 70GB, the 50GB drive is free.All programs are about 11GB, Windows 7 ultimate 64 is about 17GB so all together it should not exceed 30GB. Suddenly I found on one day that my user folder became 25GB without any reason. When looking into it and calculated all subfolders it even did not come to 1GB.So the C drive is almost full and I have no idea for the reason.
View 2 Replies
View Related
Nov 30, 2012
When I reboot the laptop to install Windows XP, it goes well. But when it comes to the page where you can Select, Delete or Create a partition, the laptop's system drive is not showing. The page only shows the USB drive as my drive C, because it is my priority right? So now, I cannot reformat the laptop because the system drive of the laptop is not showing. What and where is the problem? Is it the bootable USB? or there is another way to make a downgrade? or the problem is my system drive?
View 1 Replies
View Related
Dec 9, 2011
My friend recently upgraded to 7 with my help. However i made the mistake of making it a logical partition. Once he deleted his old Vista partition, the system was unbootable. Now he needs a way to convert the logical partition to a primary one. I had him try use gparted live to convert it, but gparted doesnt have that option. My next idea was to run puppy off a USB and use a partition manager on that.
View 1 Replies
View Related
Jun 4, 2009
Tried a system restore from the RC1 install disk? Mine lists about 8 restore points, but when I select one, it tells me that "You must enable System Protection for this drive." and it will not restore.. I understand that from the Brink tutorial on this topic of System Restore, that it's supposed to be on my default. There is no way I can check to see if it is on or off, because my computer will not boot. I certainly didn't turn it off, so I am wondering what is going on. It doesn't seem to make sense to create restore points if you can't use them.
View 9 Replies
View Related
Mar 4, 2012
I need to create a system Image of my C drive. I m I right in thinking Windows Backup wont allow me to save that image onto a USB Flash drive?
What if I use something like paragon, does that allow the actual image to be put into a flash drive? I know they allow "bootable usb" but I guess that s the same as what the Windows 7 DVD/USB tool does right..i.e but the actual windows to boot into and then use an image in the HDD to restore?
View 4 Replies
View Related
Apr 7, 2012
I recently got a new SSD drive that I was interested in turning into my "System Drive" where I just keep all my system files (and some applications that I want to run fast) so that my boot speed is faster.So this is what I did: Downloaded EASEUS Disk Copy Booted it from a USB Copied my System Reserve and System Partition onto my SSD Set my System Reserve on my SSD to Active using Diskpart Changed the boot order to run my SSD first at startup Once I completed all these steps I started up my computer and after my post I get a little white bar "_" that just stays there blinking forever.I have tried changing my SATA controller to AHCI with the same result. (It's on IDE, now)Did disk copy not copy some of the files I need to boot with my SSD? Or did I not copy all the correct partitions?
View 9 Replies
View Related
