Setup SSD With SRT Or OS Installation?
Feb 1, 2012I just ordered a Gigabyte Z68X-UD3H- B3 mobo.
If you were me would you add a 64GB SSD and setup this system for Smart Response Technology or would you add a 120GB SSD and install the OS on it?
ADVERTISEMENT
Installation Error: Setup Cannot Continue Due To A Corrupted Installation File
Sep 13, 2009I am installing Windows 7 (Custom installation initiated from Windows XP) but I get the following error message when the installation is on the "Installing updates" step of the installation:
"Setup cannot continue due to a corrupted installation file. Contact the vendor of your Windows installation disc or your system administrator for assistance."
Do you have any idea what the problem may be with the installation? Is there a way to see what file that may be corrupted?
I have tried to burn the DVD in low speed, but the error appears anyway. I have a MSI K8T Neo2-Fir mainboard and the Windows 7 upgrade advisor application says that my hardware is okay for upgrading.
Installation Got To Setup Services?
May 10, 2011i installed windows 7 but didnt know u had to partition the hard drive the instalation got to setup services and restarts then it says that the hard drive is in bad condition but i cant open any options such as bios or setup only thing i can do is press f1 to resume which does same thing wit services setup then goes back to the black screen with f1 resume
View 1 Replies View RelatedWindows 7 Won't Complete Setup Installation
Jul 9, 2012I am trying to install my windows 7 and it wont complete the setup. After all the files load from my original disks, the computer restarts and starts the setup but its been a blank screen for over 2 hours now and still nothing. I can use the restore from an image file and it sets up in 30 minutes and works but i have no home group setup and cant read some external hard drives right so I wanted to try a clean install. The computer is a Gateway 64 bit.
View 7 Replies View RelatedCan't Continue Windows 7 Setup Installation
Apr 22, 2012i am trying to upgrade my computer from vista 32 bit to windows 7 ultimate i did a windows advisor got everything installed but it keeps showing my cd rom driver as being outdated i have done the upgrade that windows 7 called for (cyberlink 8.2)oh i am on a dell inspiron 530s with 3gig mem and 140gig hd i have copied windows 7 to a flash drive (8gb) when i run setup form usb drive setup comes back saying: (windows could not retrieve information the disks on this computer) then it stops..... i am wondering if my recovery disk has something to do with this........????? when my computer starts there are 2 copies of vista 1 is corrupt which is called (recovery) the other one takes me to vista..... i would really like to do this if possible.....also usb drive is bootable.... but i think my computer does not support it start windows 7.
View 3 Replies View RelatedService Setup On Windows 7 Installation?
Aug 17, 2012ust like you ca slipstream windows updates is there a way to pre-configure windows services - either to disable or sc delete?
View 4 Replies View RelatedGetting The Setup Of Photoshop For Installation On System
Jan 23, 2012How can I get the setup of photoshop for installation on my system
View 4 Replies View RelatedGetting Windows 7 Installation Setup.exe Error
Jan 13, 2013I m reinstalling window 7 on my new laptop ..previously it got 000000f4 error blue screen appers and it restarts all the time so i decide to reinstalll it..so when i reinstall it setup was working fine but at the end it got setup.exe error ..i thought may be cd is corrupt ..so i bought new cd now when inset a cd it appera press any key to boot from cd han i presss any key than window is loading file after that window is starting up appers than it is frozen their why .
View 1 Replies View RelatedCannot Complete Installation Of Windows 7 On RAID 10 Setup
Feb 18, 2010- build a system with 1 WD1101FALS HDD and installed Windows 7 64 bit no problem. All was good for few days until I got a bug to set up a RAID 10.
- Went out bought 3 more of the same drives. All 4 drives are WD1101FALS 1TB.
- Set up the RAID 10 array on the ASUS motherboard, got the RAID drives for Win7 64bit on a USB key.
- Start install, no problem. Win7 asks for drivers, I click browse and select the drives from USB for the RAID. Install continues, files are copied, thing are flying, it's fast.
- Then 1st re-start
- Windows continues to install (finalizing things, registry update, etc).
- I get to 4 check marks on the Windows Install screen and then it goes into the last step "Completing Installation". The progress bar goes to about 80% complete and then
BLACK SCREEN, computer re-starts. Windows comes up with a message "The computer restarted unexpectedly or encountered an unexpected error. Windows installation can not proceed. etc.." It assks to press OK and and PC re-starts and the installation re-starts from scratch. I tried about 15 times, with different RAID drives, from XP to Vista, to Win7.
I have no clue what else I can try. Usually people have problem with the RAID drives but I have no problem with that step. The drivers are selected and seem to be working fine. The install almost completes.
Here are the images on how far along the install goes. The progress bar actually goes more than that, I just took a picture before the black screen.
Windows 7 Installation Hanging On Setup Is Starting
Dec 12, 2011I am trying to install Windows 7 on a new hard drive but it is hanging on the "setup is starting" page.
View 2 Replies View RelatedWindows 7 Installation Fails After 1 Setup Session?
Aug 2, 2010I am trying to install Windows 7 on my Acer Predator 7750G but everytime the first installation phase stops it says that it cannot configure my computer so the installation will stop.I have had some virus problems on my HDD were i couldn't see what was on them, that is the reason why i have choosen to install from scratch on the computer!
View 9 Replies View RelatedMake An Installation DVD That Boots Without Setting The Setup?
Nov 27, 2011I want to make a 100% automated Windows 7 installation. (Literally 100%, meaning you do not have to know anything to install it) You only need to put the DVD into the DVD Rom and restart the computer and it will automatically:
1- Boots the computer from the DVD (No need to set the DVD Rom to the first priority)
2- Formats the drive C:
3- Installs the windows and drivers and some software
I know how to do part 3, but I'm not sure about parts 1 and 2.
Installation Freeze After Setup Files Are Loaded
Dec 10, 2009So I just built my new computer and fired up my Windows 7 Ultimate 64-bit disc. The setup files load, the Windows logo video plays, the pretty blue screen with the flowers in the corner appears and my cursor has the rotating green circle indicating something is happening.
Then the circle stops spinning and disappears. At this point it appears the installation freezes. Pressing any keys or moving the mouse does nothing. I have to restart the computer. Same thing happens. Any off-the-bat suggestions before I start troubleshooting hardware?
My hard drives are in a RAID configuration per the M/B controller and a mirror volume has been created on the disk. I have one IDE DVD rom drive (the only part of the computer that's not brand new) and one additional HD audio card installed. The system is stable in the BIOS.
BSOD When Windows 7 Is Extracting The Installation On Setup
Mar 17, 2011BSOD when Win7 is extracting the installation on setup
View 3 Replies View RelatedWindows 7 Installation Stuck At Setup Is Starting
Jul 5, 2011I am trying to install Windows 7 through USB in my Dell studio 1555 Laptop. Every time it gets stuck at "setup is starting".I have already disabled all other boot options except USB. There is no floppy drive option.I have gone through more or less every post related to this problem , but the common solution that is to remove all the USB, Firewire etc. attachments. It does not work in my case as I am installing from USB.
View 2 Replies View RelatedWindows 7 Installation Hangs At (Setup Is Starting) Screen
Mar 22, 2011I am with a friend re-installing Windows 7 on his laptop. Unfortunately the laptop had been infected beyond repair by a virus/malware and would not boot past bios. When installing Windows 7 x32, I make it to the "Setup is starting..." screen and it does not continue. It is not the disk as I have used the same one to install it on my laptop. The laptop is a Dell Inspiron 1545 with 4gb of ram and 500gb HDD space.
View 14 Replies View RelatedSetup Is Starting Services / Windows Could Not Complete Installation
Jul 19, 2012Setup is starting services.Windows could not complete the installation. To install Windows on this computer, restart the installation.About one month ago I decided I wanted to have a clean install of windows 7 on my acer machine. I did this by using an acer made pre-installed program. It claims to be very straightforward, all you have to do is click a button and they will reinstall windows 7 for you and even back up all your data ,so that after the clean install you don't lose a thing. Sounded great but in reality it has stopped my notebook from working.I am now in a circle-jerk of the error message I stated in the beginning of this topic. Once my computer restarts it just gets me the same error message again. I tried booting from a bootable USB-key with the windows 7 iso downloaded from official sources. But this did not do anything from me. I also went to acer support in my city. They offered me to fix it. All they had to do is copy all the info of my hard drive I wanted to keep and do a fresh install of windows 7. Would take them 3 hours. This is the easyiests option for me. But problem is I live in China and I don't trust those tech support guys for good reasons. I went there with my laptop, the tech-support guy put in a usb-key and started up my computer. It started some kind of diagnostics. After 20 minutes of this he stopped the diagnostics and started running some chinese software on my computer. Presumably booting from the USB-key. After a couple of clicks he was browsing around on my hard-drive. I was right behind him and could see him every move. He was snooping around my folders looking for all sorts of personal stuff. He was going to folders he had no business going to. I think he thought I had no idea what he was doing or would not recognize he was snooping around on my computer. At one point he went into a folder and told him not to go there in chinese. He quickly exited, but then couple of seconds later went back to that same folder to do some looking around. Presumably cause he thought I would not notice. So I do not trust these people one bit. And would not want him to copy all the info of my hard drive to then re-install windows7.
View 1 Replies View RelatedError Code 6 - Setup Was Unable To Complete The Installation
Nov 1, 2009i recently installed windows 7.. when i installed VIA drivers for graphics it didn't get installed properly... i had the message "setup was unable to complete the installation (error code-6) ".. so i was asked to upgrade my BIOS... i downloaded it and installed it... when i ran the update, the system just hanged up and nothing happened for hours,..
so i had to restart the system and went to BIOS settings and clicked load optimized settings,,,.. from then onwards my OS is booting until the windows startup screen appears and just hangs..it's not booting to the users login... but it logs in at times... i dont have any restore points too..what to do?
Setup Was Unable To Create A New System Partition / Installation Error
Dec 28, 2011I have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me saying Setup was unable to create a new system partition or locate an existing system partition.The stupidity that I did was deleted the partition which had the Recovery Drive in it. So, now I am stuck and not able to install Vista as well as Windows 7. I am not able to boot Windows as there is no OS in my laptop now.
View 9 Replies View RelatedSetup Starting Services Loop - No Repair Or Installation Disk
Feb 8, 2012My laptop Specs below:
Acer Aspire 5742
Intel i5-480M
6GB DDR3
Intel Graphics
It started when I needed to take the computer back to factory default with a fresh install. It was going back to Acer to have the charger point fixed (charger socket had become loose but still charged when it was held in). I used the control panel interface to reinstall windows, all was going well until the laptop power died, I restarted the laptop and the screen displayed:
"Setup is starting Services" a pop up box then appeared with "The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer and then restart installation."
I have searched around the net and found a few guides but most require a repair disc or Installation disk. I have neither. Is there any way of starting the install again? For example from Command Prompt?
Ranish Partition Manager - Setup Cannot Continue Due To Corrupted Installation File
Dec 11, 2011I have a Sony Vaio VPCEB23FM, At first when I tried to go to windows i got a black screen that said "Operating System Not Found", so my friend tried to fix it with a windows 7 repair cd. But here is the problem he accidentally formatted the Hard Drive which deleted all the files and file the manufacture put in it, he also tried to mess with the ranish partition manager, so he tried to install a fresh windows 7 OSX but the laptop shutoff, now he tried it again and we get a message saying "setup cannot continue due to a corrupted installation file" I cant get to my desktop either.
View 1 Replies View Related"DVD Drive Device Drivers Missing" In Windows 7 Installation Setup
May 30, 2010my attempt to install windows 7 today ended in ! When I boot from the DVD, choose the Language and press "Install" I get an Error message stating "A DVD/CD drive device driver is missing. If you have a driver CD/Floppy please insert it now..."
Here are my specifications-
HP Pavilion p6126f Desktop PC Product Specifications HP Pavilion p6126f Desktop PC - HP technical support (Austria - English)
I have experienced this same problem with Vista x86 and x64. I am trying to clean install Windows 7 64bit.
I put the drivers on a thumb drive and Browse to it when 7 prompts me. Funny thing is, Windows 7 reads all the other files on the thumb drive like .psds, .flas, .skps, and so on.... but it just plays stupid to the actual drivers for the motherboard/chipset. The system rejects XP and I was forced to put Ubuntu on it. Ubuntu sucks, nothing runs. I know all about WINE to get some programs to run but I use the entire Adobe Suite.
Windows 7 Installation Hangs At "Setup Is Starting..." Screen
Mar 22, 2011I am helping out a friend by re-installing Windows 7 on his laptop. Unfortunately the laptop had been infected beyond repair by a virus/malware and would not boot past bios.When installing Windows 7 x32, I make it to the "Setup is starting..." screen and it does not continue. It is not the disk as I have used the same one to install it on my laptop. The laptop is a Dell Inspiron 1545 with 4gb of ram and 500gb HDD space.
View 1 Replies View RelatedSetup Was Unable To Create A New System Partition Or Locate An Existing System Partition - Installation Error
Dec 28, 2011I have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me error saying Setup was unable to create a new system partition or locate an existing system partition.
View 9 Replies View RelatedWindows 7 Starter Getting Error On Initial Setup; Locked In Setup Loop?
Oct 5, 2011one of the netbooks was plugged in to initially power it up, but then hard-shut-down before Windows could run through its initial setup.Now when I boot up the netbook, and it attempts to go through the initial windows setup "Setup is starting services", and then throws an error message: The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer, and then restart the installation.I restart, and the cycle continues. This happens whether I try to boot normally or in safe modeI've got no CD-drive attached to it, so I'm not sure what I can do to break this error cycle.
View 6 Replies View RelatedSetup Will Only Run In Administrator Mode - Setup Is Aborting
Jan 16, 2009When I try to install some programs and drivers i get error: 'Setup will only run in administrator mode. setup is aborting.'. I only have one account which has administrator rights. I have already tried to enable and disable UAC, booting in safe mode, run as administrator, enabling original administrator account, adding permissions, taking ownership, changing compability mode and other but nothig is solving my problem. I'm running windows 7 x64 build 7000.
View 4 Replies View RelatedSetup Can't Continue, Restart The Computer And Restart Setup
Oct 28, 2009I am trying to upgrade Vista to Windows7 Home Premium and I got this message after the installer copied ~2GB of files on my PC:
"setup can't continue. restart the computer and restart setup. when prompted try getting the latest updates."
I restarted the PC and restarted the setup and I got the same message. I updated the Mother Board Bios and restarted the setup I got the same message. I have tried both options (get update and no update during the setup). And it didn't work.
I do not want to do custom install (fresh install) on my computer.
Installation Hangs At Start Of Windows 7 Installation
Jun 2, 2011I have just got Windows 7 Ultimate.I accept the Licence Agreement, set my partitions as i want them but when it gets to the expanding files part it will hang at 0%. This happens on both the 32 & 64 bit disc.This is a brand new purchase which I opened it about an hour ago.The laptop has a 400GB HD and 2GB of ram. It came with Home Prem x64 pre-installed, So the hardware meets the requirements.What seems to be the problem?
View 9 Replies View RelatedWindows 7 Installation - Computer Shuts Off During Installation?
Jun 29, 2011I just bought a new hard drive and a brand new Windows 7 Home Premium 64bit disc and I am doing a clean install on the new hard drive. it seems that everything is going normal, but at a random time during the installation, the computer just shuts off.sometimes it doesn't even get to the installation when it shuts off. sometimes it shuts off in the middle of the "windows is loading files..." black screen. there are no beeps when it shuts off or when I turn it back on. there are also no error codes.whenever i turn it back on it simply acts as if it never tried to install windows and starts the boot all over from the disc
View 9 Replies View RelatedAsus P9x79 Ssd Installation With New Installation Of Windows 7 Pro?
May 16, 2012So i have a new SSD Corsair Force 3 240 gig and all I want to do is install Windows 7 Pro on it. This board does not support parted magic (cannot wake from sleep and there are no onboard video to wake up to) so ive resorted to clean all.I have not been able to successfully boot the OS on the SSD. I never intended on setting up raid but apparently all the literature i see is on raid. I created a USB install disk as reccomended onto a 8gig ntfs primary active did the bootsect /nt60 X: and it successfully worked copied the cd over to the flash drive and copied the rste drivers in a folder called drivers My SSD is installed on port 1 6gig sata intel (as this board doesnt have marvel apparrently) My DVD is installed on 3gig Sata port 6 I set up Raid in the bios as reccomended by others (as this is the only way to install ssd?).
Nothing UEFI is enabled There are no other drives hooked up to the computer. Just SSD, USB cordless mouse, keyboard and no network cord or WIFI i started with a clean ssd as reccomended my bios recognized the ssd on post i booted into the win 7 install (MBR not uefi) i loaded the 64 bit rste drivers from asus as reccomended by others i left the machine to install the usb then booted into windows install (for whatever reason) i pushed f8 to boot my corsair windows brings up an error on a black screen File: windows/system32/drivers/adpahci.sys driver did not load Status: oxc0000221 Info: Windows Failed to load because of a critical system driver is missing or corrupt
"Windows Could Not Complete The Installation, To Install Windows On This Computer, Restart The Installation"
Apr 16, 2012First, my laptop is a Aspire 5250-BZ853. I received it back in October, I think...may've been earlier. But anyhow, it was working just fine yesterday until I did a Windows Update. I had to restart, and it was fine again. But then it began running sluggishly slow, and just terrible overall so I restarted it once more and that was when the problems began.
This entire day, this has been driving me nuts. I have important files on here, and I backed up most on my external harddrive a bit ago but there were a few I missed and hadn't the chance to get (ironically enough the most important, papers and such.) At first, it said my password was wrong -- as if someone had changed it! I restarted it once more, thinking it an error or something, and did that again so I restarted it again. Finally, it worked but I think it logged me in as safe mode somehow. After that, it restarted on its own and began this loop. I did a LOT of searching on Google until finally someone suggested to someone else to try pressing "ALT + F10" I think it was as it was starting, and finally I made progress. Before that, it was just going into a constant rebooting loop and I couldn't even log into safe mode. Trying to reset it back to a time it was working was futile, because it said there was no recovery time there! So that shot that idea down. At last, I got somewhere.as well. I clicked the reset to factory settings, but still keep all the files (and they would be saved to "C:Backup" and I thought it had finally worked. But now as it reinstalls, I got an error saying something about how it needed to restart or something...so when I clicked "okay" it began again, and finally it all just came to a stop on "Windows could not complete the installation. To install Windows on this computer, restart the installation."