Service Setup On Windows 7 Installation?
Aug 17, 2012ust like you ca slipstream windows updates is there a way to pre-configure windows services - either to disable or sc delete?
View 4 Repliesust like you ca slipstream windows updates is there a way to pre-configure windows services - either to disable or sc delete?
View 4 RepliesI am installing Windows 7 (Custom installation initiated from Windows XP) but I get the following error message when the installation is on the "Installing updates" step of the installation:
"Setup cannot continue due to a corrupted installation file. Contact the vendor of your Windows installation disc or your system administrator for assistance."
Do you have any idea what the problem may be with the installation? Is there a way to see what file that may be corrupted?
I have tried to burn the DVD in low speed, but the error appears anyway. I have a MSI K8T Neo2-Fir mainboard and the Windows 7 upgrade advisor application says that my hardware is okay for upgrading.
I would like to download the 64-bit version of Windows 7 Service Pack 1 to patch my system.
1) Is this the correct Service Pack 1 installation file for Windows 7 Professional 64-bit?
Windows6.1-KB976932-X64.exe
2) Do I need to download and install any of the other .Symbols files from the website?
3) I am installing a new PC with Windows 7 Professional RTM from the DVD. Can I install SP1 immediately after installing Windows 7, or do I need to do a Windows Update first?
I am trying to install my windows 7 and it wont complete the setup. After all the files load from my original disks, the computer restarts and starts the setup but its been a blank screen for over 2 hours now and still nothing. I can use the restore from an image file and it sets up in 30 minutes and works but i have no home group setup and cant read some external hard drives right so I wanted to try a clean install. The computer is a Gateway 64 bit.
View 7 Replies View Relatedi am trying to upgrade my computer from vista 32 bit to windows 7 ultimate i did a windows advisor got everything installed but it keeps showing my cd rom driver as being outdated i have done the upgrade that windows 7 called for (cyberlink 8.2)oh i am on a dell inspiron 530s with 3gig mem and 140gig hd i have copied windows 7 to a flash drive (8gb) when i run setup form usb drive setup comes back saying: (windows could not retrieve information the disks on this computer) then it stops..... i am wondering if my recovery disk has something to do with this........????? when my computer starts there are 2 copies of vista 1 is corrupt which is called (recovery) the other one takes me to vista..... i would really like to do this if possible.....also usb drive is bootable.... but i think my computer does not support it start windows 7.
View 3 Replies View RelatedI m reinstalling window 7 on my new laptop ..previously it got 000000f4 error blue screen appers and it restarts all the time so i decide to reinstalll it..so when i reinstall it setup was working fine but at the end it got setup.exe error ..i thought may be cd is corrupt ..so i bought new cd now when inset a cd it appera press any key to boot from cd han i presss any key than window is loading file after that window is starting up appers than it is frozen their why .
View 1 Replies View Related- build a system with 1 WD1101FALS HDD and installed Windows 7 64 bit no problem. All was good for few days until I got a bug to set up a RAID 10.
- Went out bought 3 more of the same drives. All 4 drives are WD1101FALS 1TB.
- Set up the RAID 10 array on the ASUS motherboard, got the RAID drives for Win7 64bit on a USB key.
- Start install, no problem. Win7 asks for drivers, I click browse and select the drives from USB for the RAID. Install continues, files are copied, thing are flying, it's fast.
- Then 1st re-start
- Windows continues to install (finalizing things, registry update, etc).
- I get to 4 check marks on the Windows Install screen and then it goes into the last step "Completing Installation". The progress bar goes to about 80% complete and then
BLACK SCREEN, computer re-starts. Windows comes up with a message "The computer restarted unexpectedly or encountered an unexpected error. Windows installation can not proceed. etc.." It assks to press OK and and PC re-starts and the installation re-starts from scratch. I tried about 15 times, with different RAID drives, from XP to Vista, to Win7.
I have no clue what else I can try. Usually people have problem with the RAID drives but I have no problem with that step. The drivers are selected and seem to be working fine. The install almost completes.
Here are the images on how far along the install goes. The progress bar actually goes more than that, I just took a picture before the black screen.
I am trying to install Windows 7 on a new hard drive but it is hanging on the "setup is starting" page.
View 2 Replies View RelatedI am trying to install Windows 7 on my Acer Predator 7750G but everytime the first installation phase stops it says that it cannot configure my computer so the installation will stop.I have had some virus problems on my HDD were i couldn't see what was on them, that is the reason why i have choosen to install from scratch on the computer!
View 9 Replies View RelatedBSOD when Win7 is extracting the installation on setup
View 3 Replies View RelatedI am trying to install Windows 7 through USB in my Dell studio 1555 Laptop. Every time it gets stuck at "setup is starting".I have already disabled all other boot options except USB. There is no floppy drive option.I have gone through more or less every post related to this problem , but the common solution that is to remove all the USB, Firewire etc. attachments. It does not work in my case as I am installing from USB.
View 2 Replies View RelatedI am with a friend re-installing Windows 7 on his laptop. Unfortunately the laptop had been infected beyond repair by a virus/malware and would not boot past bios. When installing Windows 7 x32, I make it to the "Setup is starting..." screen and it does not continue. It is not the disk as I have used the same one to install it on my laptop. The laptop is a Dell Inspiron 1545 with 4gb of ram and 500gb HDD space.
View 14 Replies View RelatedSetup is starting services.Windows could not complete the installation. To install Windows on this computer, restart the installation.About one month ago I decided I wanted to have a clean install of windows 7 on my acer machine. I did this by using an acer made pre-installed program. It claims to be very straightforward, all you have to do is click a button and they will reinstall windows 7 for you and even back up all your data ,so that after the clean install you don't lose a thing. Sounded great but in reality it has stopped my notebook from working.I am now in a circle-jerk of the error message I stated in the beginning of this topic. Once my computer restarts it just gets me the same error message again. I tried booting from a bootable USB-key with the windows 7 iso downloaded from official sources. But this did not do anything from me. I also went to acer support in my city. They offered me to fix it. All they had to do is copy all the info of my hard drive I wanted to keep and do a fresh install of windows 7. Would take them 3 hours. This is the easyiests option for me. But problem is I live in China and I don't trust those tech support guys for good reasons. I went there with my laptop, the tech-support guy put in a usb-key and started up my computer. It started some kind of diagnostics. After 20 minutes of this he stopped the diagnostics and started running some chinese software on my computer. Presumably booting from the USB-key. After a couple of clicks he was browsing around on my hard-drive. I was right behind him and could see him every move. He was snooping around my folders looking for all sorts of personal stuff. He was going to folders he had no business going to. I think he thought I had no idea what he was doing or would not recognize he was snooping around on my computer. At one point he went into a folder and told him not to go there in chinese. He quickly exited, but then couple of seconds later went back to that same folder to do some looking around. Presumably cause he thought I would not notice. So I do not trust these people one bit. And would not want him to copy all the info of my hard drive to then re-install windows7.
View 1 Replies View RelatedI get the attached error when I try to install Windows 7 Service Pack 1 for x64 based Systems(KB976932).
View 4 Replies View RelatedI just ordered a Gigabyte Z68X-UD3H- B3 mobo.
If you were me would you add a 64GB SSD and setup this system for Smart Response Technology or would you add a 120GB SSD and install the OS on it?
i installed windows 7 but didnt know u had to partition the hard drive the instalation got to setup services and restarts then it says that the hard drive is in bad condition but i cant open any options such as bios or setup only thing i can do is press f1 to resume which does same thing wit services setup then goes back to the black screen with f1 resume
View 1 Replies View RelatedHow can I get the setup of photoshop for installation on my system
View 4 Replies View RelatedI want to make a 100% automated Windows 7 installation. (Literally 100%, meaning you do not have to know anything to install it) You only need to put the DVD into the DVD Rom and restart the computer and it will automatically:
1- Boots the computer from the DVD (No need to set the DVD Rom to the first priority)
2- Formats the drive C:
3- Installs the windows and drivers and some software
I know how to do part 3, but I'm not sure about parts 1 and 2.
So I just built my new computer and fired up my Windows 7 Ultimate 64-bit disc. The setup files load, the Windows logo video plays, the pretty blue screen with the flowers in the corner appears and my cursor has the rotating green circle indicating something is happening.
Then the circle stops spinning and disappears. At this point it appears the installation freezes. Pressing any keys or moving the mouse does nothing. I have to restart the computer. Same thing happens. Any off-the-bat suggestions before I start troubleshooting hardware?
My hard drives are in a RAID configuration per the M/B controller and a mirror volume has been created on the disk. I have one IDE DVD rom drive (the only part of the computer that's not brand new) and one additional HD audio card installed. The system is stable in the BIOS.
i recently installed windows 7.. when i installed VIA drivers for graphics it didn't get installed properly... i had the message "setup was unable to complete the installation (error code-6) ".. so i was asked to upgrade my BIOS... i downloaded it and installed it... when i ran the update, the system just hanged up and nothing happened for hours,..
so i had to restart the system and went to BIOS settings and clicked load optimized settings,,,.. from then onwards my OS is booting until the windows startup screen appears and just hangs..it's not booting to the users login... but it logs in at times... i dont have any restore points too..what to do?
I have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me saying Setup was unable to create a new system partition or locate an existing system partition.The stupidity that I did was deleted the partition which had the Recovery Drive in it. So, now I am stuck and not able to install Vista as well as Windows 7. I am not able to boot Windows as there is no OS in my laptop now.
View 9 Replies View RelatedMy laptop Specs below:
Acer Aspire 5742
Intel i5-480M
6GB DDR3
Intel Graphics
It started when I needed to take the computer back to factory default with a fresh install. It was going back to Acer to have the charger point fixed (charger socket had become loose but still charged when it was held in). I used the control panel interface to reinstall windows, all was going well until the laptop power died, I restarted the laptop and the screen displayed:
"Setup is starting Services" a pop up box then appeared with "The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer and then restart installation."
I have searched around the net and found a few guides but most require a repair disc or Installation disk. I have neither. Is there any way of starting the install again? For example from Command Prompt?
I have a Sony Vaio VPCEB23FM, At first when I tried to go to windows i got a black screen that said "Operating System Not Found", so my friend tried to fix it with a windows 7 repair cd. But here is the problem he accidentally formatted the Hard Drive which deleted all the files and file the manufacture put in it, he also tried to mess with the ranish partition manager, so he tried to install a fresh windows 7 OSX but the laptop shutoff, now he tried it again and we get a message saying "setup cannot continue due to a corrupted installation file" I cant get to my desktop either.
View 1 Replies View Relatedmy attempt to install windows 7 today ended in ! When I boot from the DVD, choose the Language and press "Install" I get an Error message stating "A DVD/CD drive device driver is missing. If you have a driver CD/Floppy please insert it now..."
Here are my specifications-
HP Pavilion p6126f Desktop PC Product Specifications HP Pavilion p6126f Desktop PC - HP technical support (Austria - English)
I have experienced this same problem with Vista x86 and x64. I am trying to clean install Windows 7 64bit.
I put the drivers on a thumb drive and Browse to it when 7 prompts me. Funny thing is, Windows 7 reads all the other files on the thumb drive like .psds, .flas, .skps, and so on.... but it just plays stupid to the actual drivers for the motherboard/chipset. The system rejects XP and I was forced to put Ubuntu on it. Ubuntu sucks, nothing runs. I know all about WINE to get some programs to run but I use the entire Adobe Suite.
I am helping out a friend by re-installing Windows 7 on his laptop. Unfortunately the laptop had been infected beyond repair by a virus/malware and would not boot past bios.When installing Windows 7 x32, I make it to the "Setup is starting..." screen and it does not continue. It is not the disk as I have used the same one to install it on my laptop. The laptop is a Dell Inspiron 1545 with 4gb of ram and 500gb HDD space.
View 1 Replies View Relatedone of the netbooks was plugged in to initially power it up, but then hard-shut-down before Windows could run through its initial setup.Now when I boot up the netbook, and it attempts to go through the initial windows setup "Setup is starting services", and then throws an error message: The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer, and then restart the installation.I restart, and the cycle continues. This happens whether I try to boot normally or in safe modeI've got no CD-drive attached to it, so I'm not sure what I can do to break this error cycle.
View 6 Replies View RelatedI have a Dell XPS M1730 with Windows 7 Ultimate and it was doing an iTunes update and the lid got closed during the update process. Now when I start the computer up it says "the user profile service service failed the login, user profile cannot be loaded". The computer starts up in safe mode and won't let me do a system restore because it says it is shut off.When I look at User Profiles in Windows 7, it states that the users profile is as backup and the default profile is the local profile. How can I fix my computer to get my user profile back up and working?
View 1 Replies View RelatedWhen you boot you get the login screen, click login, then instantly displayed with this message:"User Profile Service service failed the login.User Profile cannot be located."You cannot log into windows normally or in safe mode, I don't use the PC as its someone else's so I don't have any other information as they don't know either they just turned it off and this is what happened when they turned it on.
View 14 Replies View RelatedI've tried going into regedit and changing the RefCount to 0 and restarting but it keeps going back to 2 - it was at 3 originally but keeps reverting to 2 when I restart.
View 1 Replies View RelatedWhen trying to log onto my user account, i get this error.
"The user profile Service service failed the logon.
User profile cannot be loaded" Unfortantly this is the only account i have so i have no way to access my computer.
I am running Windowns 7 Ultimate 32 bit (non beta)
Any help please?
I have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me error saying Setup was unable to create a new system partition or locate an existing system partition.
View 9 Replies View Related