Scan Now Cannot Repair Files
Jul 12, 2012
I have disconnected one of my HDs for audiorecoding. Windows seems to try to boot from it from time to time. Sometimes when I cant boot, the windows installation cant be found at all. Win keeps telling me to change the wireless USB to a faster one, and somtimes it drops out.I have updated all drivers lately, run chkdsk and scf / scannow : it finds files damaged, but cant repair.Even when I bought the PC it could not find the one of the HDs, I changed the ASA-connect-cables and it worked till now. most of the time the PC runns ok.
View 4 Replies
ADVERTISEMENT
Jan 13, 2013
I have Window Seven family on my laptop.It goes quite well. but doing some maintenance, I noticed that SFC scannow detected a problem.
From the log (sfc detail below) it seems to me that it is autotchk.exe is corrupted, both in Windows and in Windows backup store.I can however do a checkdsk which go fine, and do not detect problem (it seems to often be the case when the autochk.exe is currupted). So it goes well.As suggested on many thread, I redid many sfc scans, reboot and retry (seven times at least) without change. O course I did also many virus and spyware scan, both software and online, an the PC is clean, so it don't seems to be the problemI would like an easy remedy, as I don't want to spend days reinstalling Windows, software and settings, and as everything else seems fine.
1 -I was wondering it the autochk.exe is really to be changed, and if this is the only SFC problem. (I posted scan details)
2 -And if so, is this a way I can just copy Autotchk.exe from another PC running window (32 bits as the laptop, in Ultimate or Starter version (both at hand) and replace it in Window.OR to take it from a friend PC that have Seven Family (exactl like the laptop) And also should I change also both autochk.exe.mui which are in the same file or is it pointless ? Or, if not possible, where and how can I get an clean autochk.exe ?
3 - Or is the whole thing unecessary, and am I better to leave things as they are ?
View 6 Replies
View Related
Jan 22, 2012
I have installed windows 7, and connected it the my printer: (Brother DCP-135 C)
after connected it without install the software as I did before with Windows XP, it can printer, but cannot scan, I tried to install the software, it tells me I have to update
View 1 Replies
View Related
Dec 8, 2011
I have some old files that were created with an HP DDeskjet scanner. They are on my PC as an application when I try and open them in Win 7. I can not see the extension, but I think they are .jsd if my feeble memory is correct.I can not find any reference in HP,how I can get the fix to open these files and view them?
View 2 Replies
View Related
Jun 14, 2011
I've run an sfc scan and it reports corrupt files but when i generate an sfcdetail log file on my desktop it shows no currupt files in the log is the sfc tool broken?
View 3 Replies
View Related
Oct 30, 2011
I just reinstalled Windows and I mistook my C drive for my Windows.Old file and I highlighted everything and clicked delete even after I was prompted about system files. My machine is running fine and I'm getting no warnings but I want to know what files I deleted and if there's a way to get these files back without losing everything that I reinstalled. Is there a utility to scan for any missing system files?
View 5 Replies
View Related
Jun 5, 2012
When i try to open epson scan it comes up error cant find files I am using windows7 64bit and the software came with the epson stylus sx445w printer works fine
View 3 Replies
View Related
Jul 24, 2011
I found the [sr] tags in the cbs log file. some of them refer to amd which I don't have. At any rate, is there any way to manually repair these files?
View 7 Replies
View Related
Dec 18, 2011
I was having problems with my wallpaper (couldn't change it) after fresh instalation of windows and I found a solution on somewhere on the interent. (I had to delate one file). But they also said I could do scannow using cmd.exe. So I did it.[CODE]
View 2 Replies
View Related
Feb 20, 2012
I have run sfc/scannow in win 7, and have followed instructions to run sfc at boot in command prompt, but nothing has solved the errors. i have saved the file sfcdetails.txt to desktop, and have extracted only the problematic parts and saved it in another file problems.txt kindly check the file, as i have attached it here.
all the files are either .inf or with .nlp extensions.windows is running fine. but i want to get rid of the problems before they become a serious issue. I have a pre-installed OEM version of win 7 basic SP 1, and i have a HP G6-1117TX laptop. There is a drive named "System", which is the active and boot-able partition, and is not the same drive where windows is installed.
View 5 Replies
View Related
Jul 31, 2012
I tried doing SFC /SCANNOW but its not working certain programs that I try to run they won't run e.g. cmd.exe, sfc.exe and a few more...
View 4 Replies
View Related
Sep 15, 2011
My computer was installing the latest updates for windows 7 professional 64 bit and the battery died during the shut down process, and now when I start the computer it will allow me to log in but when it hits the desktop it freezes up completely. I have tried using the system restore but somehow my restore points cant be found anywhere and when I tried using the system repair option on the installation cd it says it cant because the problem is unfixable. The error it says it has is in the boot sector and it says the error code is 0x45d, but when I ran it a second time it didn't say that. I really don't want to deal with pulling off all of my personal files and then installing a fresh copy of windows because that would be too much of a hassle, but if i have to i will.
View 2 Replies
View Related
Nov 8, 2010
running Win7 X64 having recently (2 months) transferred from XP. My Outlook pst files are in need or repair. I have used SCANPST.EXE on previous machines so am familiar with it. The problem is that the .pst files are stored, as it is the default location, within "/Users/Uername/Local Settings". This directory gives me the message "Access is Denied". I am logged in as adminstrator but am unable to see a way round this.
View 3 Replies
View Related
Jan 13, 2013
I've had trouble with my machine starting. I've done all the advice the 7 Forum suggests, running start up 3 times...etc., and it will work for a day or two, then not start. Then if I hit the reset button a couple of times, it will go into the start up repair and I end up with this message:
Repair Action/ System files Integrity check and repair
Result Failed / Error code = 0x490
Time Taken / 700863 ms
I've run sfc from an elevated window and it says everything is fine.
View 1 Replies
View Related
Jul 23, 2012
yesterday i was watching a show on my computer (sony vaio) and it kept freezing and lagging and wouldn't restart so i manually restarted it. when i tried to turn it on it would say "starting up windows" but it would take to long and it would restart again with error repair. when i would load error repair it would say it's loading files but only a background screen would show and no files.
View 7 Replies
View Related
May 12, 2012
I have an Acer Aspire 5750-6677. I3-2310m. It has been performing the startup repair for over a day. It's now, finally (I think), saying "windows is loading files". It has been doing this for HOURS! Can I simply turn it off and attempt a different method or will that make it worse? BTW: it came with zero discs of any kind when I purchased it new in July 2011. This is my work comp too and I can't lose the info that's on it.
View 8 Replies
View Related
Nov 16, 2011
I couldn't find Windows 7 Repair Disc / Repair System / rewrite MBR for x64?
View 1 Replies
View Related
Nov 4, 2009
Created it with no problems, apparently at least. My BIOS is set to boot from CD drive, so why won't my machine boot from the system repair disk? There were no errors when disk was created. My machine just boots to windows.
Anyone else experience this with Win 7 Professional?
View 9 Replies
View Related
May 11, 2011
I am pretty sure that a virus cause this, right before my computer shut down on it's own my anti virus popped up and said that a Trojan was found but I didn't have to do anything. Then the computer shut down and when it restartrd started to load files and then go into startup repair, only it couldn't fix it. I tried a restore, but again it said that the startup files wern't there. I just quickly scanned the diagnostic details and noticed something that said "boot critical file C:CI.dll is corrupt".
View 8 Replies
View Related
Jan 19, 2012
wreaks havoc with my Norton full system scan. It is scheduled weekly, but never does it, because my computer is on, but sleeping. How can I get the scan to not stop during sleep mode or scan if it's in sleep mode? I having to constantly unsleep my computer or change my control panel settings then change it back.
View 8 Replies
View Related
Oct 5, 2012
I cannot get my computer to restart. It tries to restart but keeps saying that startup repair cannot repair computer automatically. I try to do a system restore but it won't let me do that either
View 1 Replies
View Related
Apr 23, 2010
One day my computer decided not to load windows 7, and instead whenever i open my computer it gets to setup repair, which checks for problems automatically, and then gives the following message:Setup repair cannot repair this computer automatically
Problem Event Name: SetupRepairOffline
Problem Signature 01: 0.0.0.0
Problem Signature 02: 0.0.0.0
Problem Signature 03: unknown
Problem Signature 04: 0
Problem Signature 05: unknown
Problem Signature 06: 1
Problem Signature 07: unknown
OS Version: 6.01.7600.2.0.0.256.1
Locale ID: 1033
I have toshiba satellite P205D-S7438?
View 3 Replies
View Related
Mar 24, 2012
On start up a black and white gateway screen flashes followed by a startup Repair window.This gives me a pop up that says Startup Repair cannot repair this computer automatically.There is the option of sending the information to microsoft or viewing problem details.When looking at the details, Problem Signature:Problem Event Name:StartupRepairOfflineProblem Signature 01:6.1.7600.16385Problem Signature 02:6.1.7600.16385Problem Signature 03:unknownProblem Signature 04: 21200290Problem Signature 05:AutoFailoverProblem Signature 06:11Problem Signature 07: CorruptFileOS Version:6.1.7601.2.1.0.256.1Locale ID:1033Underneath the pop up box, The startup Repair window says WIndows cannot repair this computer automaticallywith the option of viewing diagmostic repair details or viewing advanced options for system recovery and support Under the advanced options, I have tried the startup repair, the system restore, the command promptchkdsk/f/rNone of which have worked Prior to this the notebook was working fine last night, I did not install anythingI ran the Farbar Recovery Scan ToolMod Edit: Removed FRST data, this is a malware tool not permitted in this forum and you have made no indication that this is a malware situation ~ Hamluis.
View 7 Replies
View Related
Jul 31, 2010
Start up repair cannot repair this computer automatically , I am getting this all of the time now when starting the PC ,i am sure it started when a new video card got put in but not sure?
View 2 Replies
View Related
Dec 2, 2012
when I go to safe mode and hit repair computer they say I have to use a dvd and hit repair. my dvd does not have repair on it I have trouble with startup I do not know how to use the dvd if it has no repair listed
View 9 Replies
View Related
Mar 10, 2011
I have no idea what was the last thing done on this computer (it is my wifes), but I do know that every now and then there has been a disc failure, checking disc startup, but it has always had a positive outcome.[CODE]
View 4 Replies
View Related
Jul 24, 2012
i use ubuntu OS and windows7 professional on an HP dv5 notebook, last week i made a mistake in that i removed the battery while the machine was on as i was using windows7. the time i tried to restart it again it recommended startup repair which ran but 'could not repair it automatically' i tried the f8 options but to no avail. when i run scan and memory diagnostics all are successful but the system can still boot. am able to view my data on windows through ubuntu but ubuntu can't execute windows programs. what should i do to restore windows without loosing data?
View 5 Replies
View Related
Jan 8, 2012
My laptop is in a homegroup with my desktop to do printer sharing and also remote desktop. Not sure when it started but both systems are booting very slow. So I ran the sfc /scannow. The CBS.log shows the errors that couldn't be fixed. Is there anyone that can help me fix the errors?Because I did an anytime upgrade doing a clean install is going to be a real pain and I am hoping with the log that I can attempt a fix rather than doing a clean install or system repair which both will require hours of doing. Seems if I understand the log that one problem is a printer issue, maybe?I don't want to post the log here and am not sure which forum I should seek help on.Both my systems are running Win 7 64 bit, Norton IS 2012, Malwarebytes, and I use CCleaner on a regular bases. Everything tells me I am free of any problems like viruses, malware, spyware and the like.
View 6 Replies
View Related
Dec 14, 2012
windows 7 startup repair on every boot but after startup repair hibernate works. How to fix?
View 1 Replies
View Related
Feb 22, 2011
On my old machine with XP, I ran the HP specific drivers without issue and these drivers could scan directly to multipage pdfs. On the new computer with Windows 7, the generic HP PSC 1200 driver that is part of Windows 7 will not scan to pdf. It does the bmp, jpg, tiff, and png. And not multi page. Any way to get back the pdf capability without having to buy acrobat? I legally had the ability before the "upgrade".
View 3 Replies
View Related
Jan 13, 2012
I need to print all incoming faxes to pdf automatically and unattended. I have selected a good pdf printer, and set the print option (Tools-Fax Settings-receive-more options). The fax come is, the print to pdf never happens.
View 2 Replies
View Related
