"no Drives Detected" Mess During Win 7 Installation
Aug 19, 2009
I'm using Win 7 Professional x64 rtm from MSDNAA.
When i try to create a clean install, everything goes smooth untill the Partition selection screen. I get a "no drives were detected" notice and the list is empty. It offers the Load drivers option but i dont really know where to get them.
I have Striker Extreme motherboard, and a wdc wd5000aaks SCSI hard drive (connected via SATA).
Im running Vista Ultimate x64 at the moment. If i use vista's install dvd to see if it finds hdd drive during installation, it does find them. Also if i try to use Windows 7 installer from within Vista, win 7 installer finds my hdd normally.
View 4 Replies
ADVERTISEMENT
Aug 19, 2009
I'm using Win 7 Professional x64 rtm from MSDNAA.
When i try to create a clean install, everything goes smooth untill the Partition selection screen. I get a "no drives were detected" notice and the list is empty. It offers the Load drivers option but i dont really know where to get them.
I have Striker Extreme motherboard, and a wdc wd5000aaks SCSI hard drive (connected via SATA).
Im running Vista Ultimate x64 at the moment. If i use vista's install dvd to see if it finds hdd drive during installation, it does find them. Also if i try to use Windows 7 installer from within Vista, win 7 installer finds my hdd normally.
What should i do?
View 3 Replies
View Related
Jun 10, 2012
SO i have just built my first custom PC and I know it is all installed correctly, except possibly my hard drive. So I get to the window where I am supposed to select the drive where windows 7 will be installed. No drives are detected... so this means my hard drive isnt being recognized... I just got th 6822148837 and my case is weird, im not sure if i installed it all the way. My case is the Thermaltake Level 10 GT and it has hard drive slots and some kind of connector in the slot so that it plugs in automatically. I think it may not be connected fully, like I might need to attach a cord too.
View 13 Replies
View Related
Dec 1, 2012
my computer does not starting up...so i choose to press f12 then diagnostics then it shows that no hardrive detected -warning.
View 1 Replies
View Related
Jan 8, 2012
My desktop does not detect and external hard drive that do not come with their own power supply. I have many externals that also plug into the wall and they are working fine; but whenever it is an external without a plug, i.e. the portable ones they are never found.
They do not show up in Computer Management, so it is not because I did not assign a letter to the drive.
I have tried various things, but I don't know what I should be testing for or looking for. These externals all work on other laptops and other desktops perfectly fine so it is not the externals. When they are plugged into my desktop, they light up normally like they should, but the desktop never detects them. I have tried these externals with the different USB cable I have on hand, but nothing seems to work. It doesn't matter which USB port I plug the device in, it still gives me no response.
I am running a i7 860 on a ASUS P7P55D Pro.
View 3 Replies
View Related
Jun 11, 2010
I tried to reformat my dads hard drive to reinstall windows 7. It was in 2 partitions, so I ran the windows 7 disc and it ran through the motions, I formatted the c to re-install windows and it wouldn't let me. I went into dos under diskpart to try and format it that way, still no luck. I connected it to my computer then under disk management deleted the 2 partitions so there was only 1 now which had the size i.e, 600GB Unallocated. I connected it back into my dads computer and ran the set-up again. Now the computer wont even detect the drive. I need to re-format the drive to like factory default, is this possible, also do I have to do it in dos.
View 6 Replies
View Related
Jan 23, 2012
Just today, I decided to reset the BIOS to default settings by resetting the CMOSI used a metal screwdriver to touch the two cmos pins on the motherboard. The problem is, the computer WAS turned off BUT I forgot to pull the plug out of the power supply before resetting the cmos which is what caused the problems. It ended up booting the computer so I waited for it to load and when it got to the screen that said loading operating system underneath it it said missing operating system. I've researched this and checked my bios settings to make sure the hdd was the first boot priority choice and it was.After a few failed tries to get it to work, I was almost convinced my hdd's were fried. I tried re-installing windows 7 by booting to the dvd first, but during installation, when i got to the box that makes me choose my hdd no hdd's were listed. I brought up the command prompt to do a chkdsk and I got the message "This drive is in raw format". After that, I turned the pc off, unplugged the power cord, and took the hdd's out. I reformatted them by connecting them to a startech device and connecting that to my laptop (which is not the tower the drives were originally connected to).
After reformatting to ntfs, I ran chkdsk /f/r on both my hdd's. After this, I'm convinced that my hdd's aren't fried otherwise the device wouldn't have picked them up in the first place. I thought they'd be good to go after the chkdsk ran on both of them but i'm having the same problems trying to re-install windows 7. The only progress now is, I can actually run chkdsk with the drives back in my tower which i'm doing right now.In the dialog box, it said something about loading drivers? I thought the computer would pick up the hdd's anyway because i've re-installed win7 before and never had these issues. So what's your suggestions? Am I going to have to find the drivers for the hdd's and install them before reinstalling win7
View 5 Replies
View Related
Jan 16, 2013
My computer ended up with the malicious toolbar iminent. After multiple attempts to remove it I decided to reformat the computer, since my last backup is mercifully recent. However, when I attempted to run a repair disc, but in the middle of this I received the message in the thread's title. What's wrong? Is the repair disc something other than the disc I need? While writing this via my phone I'm currently trying an alternative of restoring my computer from a system image on my backup drive, I don't know if that will solve the problem. But even if it does, I think I should still try to find out what went wrong here for when something goes wrong in the future.
View 9 Replies
View Related
May 24, 2012
I got a second-hand PC with windows 7. I deleted the previous owner's accounts and created new ones called Owner (regular) and Owner-admin (admin access). Since then everything is messed up..The previous owner account still had files in /users/[account name]/ after I deleted the account. I deleted those and they were mostly gone, but some are protected or are recreated on reboot. Even though I always log in as Owner, downloaded files often en up in the previous owner's "My documents/downloads". When I try to copy them into my new "My documents/downloads", I don't have write permission. I can't write into my own user account directories...? I thought I'd recreate the previous owner's account and try to undo it from the inside out, but ended up with a Owner.Carl-VAIO.Carl-VAIO' as well as aOwner.Carl-VAIO' account. I tried to install Thunderbird, but it is so confused about what is what that it won't install. I can't blame it.
After it was already too late I discovered that my computer thinks it is part of a workgroup. I tried to reset this (it's a standalone), but I couldn't - the button remained greyed out no matter what. Not sure if that has anything to do with the problem.What can I do, other than re-install the OS with an installation CD I don't have?
View 2 Replies
View Related
Feb 17, 2013
I have Avast anti virus running as my preferred AV software. To date I have not needed to use Outlook, but this year its usefulness increased as it saves me accessing work emails through my browser (as well as maintaining the calendar and stuff). So, I start the first run set up. All went well until it asked me to log on to the exchange server. When I did so it refused, eventually telling me I had to turn off the SSL(?). From what I could see, I could only do that after the address was entered into the profile, which it won't let me do. I did some digging and read (somewhere) that Avast was the problem. I tried temporarily disabling filters and logging on again, but no different. As a test, I fired up my laptop, also Windows 7, disabled the Avast filters, started Outlook for first use, set up the Exchange connection, logged on fine. Restarted the filters, all good! So next I try to reset Outlook to first run on my desktop. Can't do it. It resets Outlook to default, but doesn't bring up the set-up screen. I suppose I can uninstall Office all together (I'd only need to back up OneNote at this stage) and run a registry cleaner, but I'd rather not at this stage. I tried importing the registry settings from the laptop (no lectures please). This sort of worked; it now tries to log on to exchange on start up, but still fails. Something is still blocking the connection. Any ideas on what the block is?
View 1 Replies
View Related
Jun 1, 2011
I am installing windows 7. but the installation cd won't recognized the hard drives but my bios does. i went to the website and looked up drivers for the wd2500s but they don't have them. they said that they use the software in windows to work. so is there any way to get the drives to work? i have three set up on raid 0
View 5 Replies
View Related
Sep 26, 2012
No partition appear when i install win 7 in my system.
View 1 Replies
View Related
Jul 23, 2010
after installation of linux mint 7 gloria when i tried to perfoam a new installation windows 7 cant't load drives as well as other operating system i tried
View 2 Replies
View Related
Nov 4, 2009
I'm in a pickle with my machine and Windows 7 after this latest update. On startup I get an error from MMDevApi.dll saying that it might not run on Windows or... something else. This also occurs anytime a program tries to use the sound card ie. WoW, Yahoo IM, Live IM, SL, etc. I've updated my sound card drivers to the newest ones. I still get an error that says the device is detected when going to "Sound Devices" in the control panel.
Trying to adjust the sounds themselves leads me to the Windows Audio thing... which won't start even from the component list.
View 1 Replies
View Related
Nov 7, 2012
I purchased a vizio all in one desktop model CA24-A2 , with windows 7 installed. I upgraded it to windows 8, but decided to return back to windows 7 because the Metro UI always crashes on me. I purchased a windows 7 disc and booted the computer off the disc. When the installation asks which drive to install it to, nothing appears. For some reason, the installation disc is not reading the drives. I've checked vizio's page, but didn't find any drivers for the hard drive that would work. I check the Bios menu and both drives appear. I've read on other forum about changing the bios mode (AHCI,IDE), but my bios menu is very restricted, and i dont have that option available. I used MiniTool Partition wizard on a bootable cd, and it was able to see my hard drives as well. I added some pictures below. When i try to boot windows with windows 8, "bootmgr is missing" error appears. After restarting my computer several times it seems i only have access to the bios menu f2, and not f8 for recovery.
View 4 Replies
View Related
Apr 12, 2012
Just built a moderate spec gaming PC from scratch, and all has went according to plan except when I try to install Windows 7, my hard drive won't show up. My new motherboard doesn't have any IDE slots, but I only have an IDE hard drive. I am using a 'Pluscom Serial ATA PCI Adapter' to connect my hard drive to the computer as it has 1 IDE slot on it. I don't have a disc for drivers and don't know where to start. I am running Ubuntu on it at the moment so I can download any drivers I may need.
View 9 Replies
View Related
Dec 22, 2010
My system crashed and i get the blue dead screen. Now i want to install windows 7 (legal) from usb. When i get to the 'where do you want to install windows?' it gives me the following message: No drives were found. Click Load Driver to provide a mass storage driver for installation.I tried to go to my bios and change some things i read from other treads, but it didn't work out for me. I just don't know where in the bios i can change things, maybe my bios is different than others.This is my laptop: MSI GX700 Intel Core 2 Duo T7500-processor @ 2,2 GHz This is what my BIOS tells me:
MAIN
Market name: GX700
Model Name: MS-1719x
Primary IDE Master [hard disk]
Secondary IDE Master [ATAPI CDROM]
System Information
[code]....
View 4 Replies
View Related
Feb 20, 2012
Set up did not find any hard disk drives during installation?
View 1 Replies
View Related
Jun 14, 2012
I have two hard drives, one is SATA 500gb and the other is IDE 150gb. I had Windows 7 on the SATA and an old Ubuntu on the IDE hard drive. I hardly ever used Ubuntu and got tired of GRUB coming up every time I booted asking which OS I want so I decided to uninstall it. I wanted to go ahead and reformat the drive so I used an old Windows XP cd I have to reformat the 150g IDE drive. It wouldn't let me just reformat without installing XP so I went ahead and did that.So now whenever I turn on the PC it automatically boots into Windows XP. In XP I can see both drives, my 500gb with all my files and Windows 7 and the 150gb with just XP on it. In my BIOS the SATA 500gb is set as the main hdd, and is set as #1 in the boot priority (IDE hdd is not anywhere in boot priority). When I bring up the boot list and choose the SATA HDD it just brings up a BIOS flasher, no Windows 7.
View 4 Replies
View Related
Nov 6, 2012
Its my own fault, I was doing this in a daze. Having installed the new SSD and gone into Windows 7 setup, I thought id created a new partition on the drive for Windows to go on. Anyways, Windows was saying there was some sort of problem, so I thought, ok , rinse & repeat - and so I hit delete...Now nothing is showing up in the drive list. It is visible in bios - and I've since used the OCZ boot disk and did a secure wipe. Still nothing. So I used a PartitionWizard boot disc, and created a brand new NTFS system partition. Still nothing. Do I need some drivers or something? Setup does say I could use a disk to find some...
View 5 Replies
View Related
Dec 26, 2011
I have a system with three hard disks on them. The Primary one has the OS and some programs. Secondary one has programs and data (like pictures and such). Third one has data and backup data.I recently formatted the Primary drive which had Windows Vista on it, and did a full install of Windows 7 Pro.After the install, the Secondary and Tertiary disks showed up in disk management; I just had to assign drive letters to them.The issue: I can see the existing Secondary and Tertiary disks in windows explorer. I can go into properties on each hard disk and see that there is used disk space on them (so the data is still there). But Windows Explorer shows both hard disks as empty. I can't actually see any of the data. What can I do to fix this...obviously without formatting the disks and losing the existing data on there? Is this perhaps a driver issue?
View 5 Replies
View Related
Apr 6, 2012
I have changed my graphic card (MSI N560GTX-TI) and new PSU (Corsair GS 700) and now my PC does NOT start, it gives me an error message: "error code biohd-2 warning no drives detected".Checked the cables, SATA ports, hardware diagnose, reset CMOS, removed the motherboard battery and nothing...My HD is a WD Caviar Green 2TB.
View 4 Replies
View Related
Jul 9, 2012
Originally I had all my data files in drive D and only programs in drive C. Somehow my old user profile got corrupted and the Backgound wall paper is not working properly. So I created a new admin profile to fix it but now I have a mess.After I created a new admin profile and moved the old users folder/files to the new user , I decided to delete the old profile after everything seems to be working properly . When deleting the old profile I elected to save old user files to my desktop ( fortunately) . I now have a very fragmented system . Some of the folder/files are still under my old username in D drive, nothing in my new user name in D drive plus almost all of the folder/files from the old user ( in drive D) are now in a folder on the desktop where windows elected to place them when I elected to save the folders/files. I really need all the old user folders.I would like to have the Data in either under my old or new username in Drive D instead of fragmented all over the place. I realize I ended up in this situation because I didnt understand fully what windows will do when creating and deleting user profiles.
View 9 Replies
View Related
Dec 5, 2011
emachine EL1200, AMD Athlon 64, Boxer 61 MB DA061L, 08120-1, 48.3V801.011. 2GB RAM, SATA HDD. Originally Win Vista but upgraded to Win 7 home premium 32 bit which worked ok. Problem - at boot up the following happens: verifying DMI pool data...update success, boot from CD, bootmgr is missing, press ctrl+alt+del to restart. inserted win 7 CD, installation progresses to stage where i get error message: no drives were found.click load driver to provide a mass storage driver for installation.
View 1 Replies
View Related
Jan 1, 2013
I just got a brand new computer for christmas, it's a hp compaq dc5850, and it was working fine until now! I tried turning the computer on and it got stuck at the blue hp invent screen, I didn't know what to do, so I finally decided to just try and restore it. When I try to use the windows 7 disc to do this it keeps saying "no drives were found. Click to load driver to provide a mass storage driver for installation".
View 1 Replies
View Related
Jul 21, 2011
I just finished putting together my computer, installed Windows 7 Pro 64 bits. However, both of my hard drives (one SSD, one regular HDD) are showing up as external drives (plug-and-play). If I click the "Safely Remove Hardware" icon, I could actually "eject" both of my hard drives.
View 5 Replies
View Related
Sep 13, 2009
I am installing Windows 7 (Custom installation initiated from Windows XP) but I get the following error message when the installation is on the "Installing updates" step of the installation:
"Setup cannot continue due to a corrupted installation file. Contact the vendor of your Windows installation disc or your system administrator for assistance."
Do you have any idea what the problem may be with the installation? Is there a way to see what file that may be corrupted?
I have tried to burn the DVD in low speed, but the error appears anyway. I have a MSI K8T Neo2-Fir mainboard and the Windows 7 upgrade advisor application says that my hardware is okay for upgrading.
View 9 Replies
View Related
May 30, 2011
am trying to do a backup of my Win 7 system drive (C, but the backup utility is saying that it must backup by non-system drives (E: and H, which happen to have "System Volume Information" folders on them. They are not system drives. E: is my main utilities drive and H: is my games drive.Somehow, Windows thinks they are system drives, when in reality they aren't.Any ideas on how to change them? When I go in to Disk Management, they are not showing as system drives. They are all partitions on the same hard drive, but there are other partitions not included in the backup.
View 3 Replies
View Related
Jun 2, 2011
I have just got Windows 7 Ultimate.I accept the Licence Agreement, set my partitions as i want them but when it gets to the expanding files part it will hang at 0%. This happens on both the 32 & 64 bit disc.This is a brand new purchase which I opened it about an hour ago.The laptop has a 400GB HD and 2GB of ram. It came with Home Prem x64 pre-installed, So the hardware meets the requirements.What seems to be the problem?
View 9 Replies
View Related
Jun 29, 2011
I just bought a new hard drive and a brand new Windows 7 Home Premium 64bit disc and I am doing a clean install on the new hard drive. it seems that everything is going normal, but at a random time during the installation, the computer just shuts off.sometimes it doesn't even get to the installation when it shuts off. sometimes it shuts off in the middle of the "windows is loading files..." black screen. there are no beeps when it shuts off or when I turn it back on. there are also no error codes.whenever i turn it back on it simply acts as if it never tried to install windows and starts the boot all over from the disc
View 9 Replies
View Related
May 16, 2012
So i have a new SSD Corsair Force 3 240 gig and all I want to do is install Windows 7 Pro on it. This board does not support parted magic (cannot wake from sleep and there are no onboard video to wake up to) so ive resorted to clean all.I have not been able to successfully boot the OS on the SSD. I never intended on setting up raid but apparently all the literature i see is on raid. I created a USB install disk as reccomended onto a 8gig ntfs primary active did the bootsect /nt60 X: and it successfully worked copied the cd over to the flash drive and copied the rste drivers in a folder called drivers My SSD is installed on port 1 6gig sata intel (as this board doesnt have marvel apparrently) My DVD is installed on 3gig Sata port 6 I set up Raid in the bios as reccomended by others (as this is the only way to install ssd?).
Nothing UEFI is enabled There are no other drives hooked up to the computer. Just SSD, USB cordless mouse, keyboard and no network cord or WIFI i started with a clean ssd as reccomended my bios recognized the ssd on post i booted into the win 7 install (MBR not uefi) i loaded the 64 bit rste drivers from asus as reccomended by others i left the machine to install the usb then booted into windows install (for whatever reason) i pushed f8 to boot my corsair windows brings up an error on a black screen File: windows/system32/drivers/adpahci.sys driver did not load Status: oxc0000221 Info: Windows Failed to load because of a critical system driver is missing or corrupt
View 2 Replies
View Related
