Keeps "resuming" Windows 7 On Wakeup?
Jan 28, 2010
i have a dell laptop with win7 ultimate on it. when i am done with the laptop i put the thing to sleep, never shutting down. lately, i noticed the laptop keeps showing me a Resuming Windows screen when i hit the power button now. its never done that before. prior to this new thing, i would turn the laptop on and when it woke up it would go right to the user login page for the windows splash, but now it shows the resuming page first, then the little scrolling bar, then it goes to the page.
View 4 Replies
ADVERTISEMENT
May 5, 2011
I generally leave my PC on during the day but lately after an hour or so it will not wake up.I have tried varying the sleep time but it makes no difference.
View 4 Replies
View Related
Nov 22, 2011
when turning on computer i get "resuming windows" then a black screen it will not let me start up in safe mode either
View 1 Replies
View Related
Apr 29, 2012
When I turn on the laptop (Dell Inspiron) it gets to the Resuming Windows screen then goes to a blank screen and then hangs forever.
There is just a blank black screen and the mouse cursor. I can move the mouse cursor but there is nothing to click on. F8 does't seem to take me into safe mode or anything like that.
I can get into bios and boot menu before it gets to the Resuming Windows screen but don't know what to do there.
View 2 Replies
View Related
Nov 9, 2010
Every time my dell laptop is in sleep mode for a while - and there is still plenty of battery left it seems to "resume windows" and it's like a startup. Shouldn't it just ask for my password and be there right away?
View 3 Replies
View Related
May 11, 2011
About a month ago my pc started going to BSOD while trying to resume after being put to sleep. PC is 16 months old. I read the forums, etc and updated the ATI radeon display driver and the Realtek network driver but the problem persisted.I also rolled back the system using restore to before the problem began but no change. I then reinstalled windows 7 64bit using the OEM CD rom and installed all the MS updates - no change. Last week, it occurred to me that it might be a monitor hw issue so I swapped out the monitor with another I had. That seemed to solve it - for 4 days - now it's doing the same thing with the second monitor.
View 5 Replies
View Related
Jun 17, 2009
How to Enable or Disable Require Password on Wakeup in Windows 7 ?
View 0 Replies
View Related
Jun 9, 2011
I have a Dell laptop that I went to turn on. The message "Resuming Windows" came on for about 5-10 seconds, then the computer turned off. Now when I press the power button nothing happens. No lights no noise nothing. I'm hoping its just stuck in sleep mode or something.
View 5 Replies
View Related
Jan 25, 2013
System Spec:64 bit- I built the machine August 2010, I have not reinstalled the OS since. Full Retail Version of Windows 7.I have been experiencing problems with this machine since about a month after I built it in August 2011. At first I would get a BSOD just every once in a while. I am at architecture school and I didn't have time to address the issue, so I just kept a diligent written log of every time I noticed it happening. I have included that as an attachment. You'll notice that there was not an obvious trigger - it would not crash as soon as I opened something, or as soon as I tried to use the sound card. It would happen both while I was working in Adobe Illustrator, and when I left my computer idle to go grab a cup of coffee or something like that. I have included all the dump files I have as attachments.Recently, however, Windows has had trouble resuming. I can't figure out exactly what is happening because it hasn't happened while I was at my computer yet. But, pretty much every time I return to my computer after a 10 minute absence, I come back to a black screen with a blinking white underscore in the top left corner. I think it has something to do with the machine going to sleep and having trouble resuming windows.
Another clue, which I've researched a little bit, is that I think I heard a single beep the other day. Granted, I'm in a studio with 50 other people and there are cellphones, headphones tons of computer and all kinds of noise, but I'm sure enough about what I heard to include it here. The forums I checked suggested this was a problem with the RAM.Here is a list of the components from the NewEgg invoice:
[code]...
View 2 Replies
View Related
Jun 17, 2011
been watching that when the system wake up form hibernation, the LED that shows me the activity (I guess read/write..) of the hard disk is blinking, and keep doing that for several minutes (2- 6 minutes).The weird part is that the system is not going slow, when i open the task manager to see what is running, in processor usage the value is minimal, between 0 and 5%.In the process tab, the only thing using some CPU is one of the svchost.exe, it had an intermittent CPU usage of 0-3%, when i finished it, the LED stop blinking.
View 3 Replies
View Related
Sep 11, 2009
For the past month I have been randomly getting BSOD when my computer wakes up from sleep. My first crash was 25 days after install, and now it happens every 3-5 days. Usually just once, and I can never seem to replicate. But it happens only when the comp is waking up, never when in use. I have tried to induce it by sleep/wake repeatedly but it happens totally randomly.
I typically don't leave my computer on for prolonged periods so I can't say it wouldn't do this after being turned on for 3 days but I have yet to have a crash like that.
My system is overclocked/watercooled and had been running stable with Vista x64 since it was built in Jan 09. I installed Win 7X64 Ultimate 7100 on July 5 2009.
So, far I have tried:
Reinstalling chipset, and updating all USB pheripheral drivers.
Update video and sound drivers
Uninstalling all windows updates
Removed one 4870 and disabled crossfire
Full repair of windows (not clean install)
Overnight memtest 8 passes
Prime 95 multithread 9 hours with no failures
Last Night I tried:
Updating chipset again, bios, and raid firmware.
Disconnecting my UPS from the USB port.
I am at a loss for what is causing this. I've seen a few threads around with
ntoskrnl issues, but none that happen only on wake up. Tonight I plan to do some PSU testing.
Does anyone have any ideas about this, mini dump file is attached ?
View 6 Replies
View Related
Jan 23, 2012
My Windows 7 is:- x64 Home Premium SP1- the original installed OS on the system.- an OEM version. Came pre-installed on system.- The age of system (hardware) is 8 Months.- The age of OS installation is 8 Months.- Never re-installed.Hardware is:Sony VAIO VPC-EB46FXIntel Core i5 CPU M480 @2.67GHz
View 3 Replies
View Related
Jan 24, 2010
I have standalone windows xp Machines that are in standby during the night and standalone windows 7 machines that are in sleep during the night. I am wondering what is the best way to get them to wake up so that my backup program can run a scheduled backup job at like 2am?
I have tried just setting the scheduled backup in my program (Cobain Backup), but it doesn't seem to work very often, and I think that the machines are just not waking up. Is there some sort of scheduled task that I can create or something in XP or 7 to make it wake up at a certain time automatically?
View 1 Replies
View Related
Sep 4, 2009
I have a problem with the hybrid sleep mode.
Whenever I try to put my notebook in sleep mode everything works ok, also normally waking up the system.
But when I disconnect the power cord and restart the system, Windows tries to resume its state but suddenly stops with a black screen and a blinking cursor.
I have absolutely no problems with normal sleep and normal hibernate (shutdown -h).
For a short time hybrid sleep worked only when I put the system to sleep with the notebook FN keys, but not through the Win start menu.
Now it doesn't work at all. Maybe this was also just a coincidence.
Can anyone help me?
View 8 Replies
View Related
Sep 16, 2012
If I reboot my desktop goes thru the procedure but the monitor stays black - nothing, not even the safety screen and no cursor. There is an amber light on the monitor which goes green when it receives its wake up call but it remains amber. I have to switch the power off entirely before switching it on again, and rebooting and this time the screen works. I've run scandisk, I've gone thru scannow, I've installed the latest graphics card drivers. I've tried changing the power settings. Bear in mind that this set up and computer has worked perfectly for 2 years and as all the hardware is working I believe it to be a software issue.
View 1 Replies
View Related
Nov 26, 2009
I have a problem about my laptop (Presario CQ40-416AU) when waking it up from sleep, I set a password for my login and I required the password when resuming from sleep but it shows password error everytime I tried to login.. what could be the problem?
View 9 Replies
View Related
Dec 8, 2012
I purchased am HP Mini 110 netbook three weeks ago to use in school while I leave my heavier and bigger laptop at home. It came with Windows 7 Starter, but I took the (bad) decision of installing an illegitimate copy of Windows 7 Home Premium because I found starter somewhat clunky.
I downloaded the ISO from a torrent and created a bootable USB. I just run the installer from Windows itself and the installation took about 45 minutes. After that I installed the drivers and everything went fine for a week. I also used the ''activator' that came with the torrent.
This Friday, as I resumed from sleep, the system froze as I put my password for a few seconds and soon after I got a BSOD and the computer shut off. As it rebooted I got a message saying that no OS is installed and that no HD is detected. I attempted to run some diagnostic tests through the BIOS but it tells me that not HD is detected. I even attempted to install Ubuntu and it doesn't detect a drive either.
I already talked to HP costumer service and they'll soon come to pick up the netbook to get it serviced, but meanwhile, I sent it to a technician to find out what is wrong with it. The news I got from him were that the HD was completely dead.
Previously, I had unplugged the HD to make sure the ribbon was not lose and plugged it again. Now, I am in this dilemma: Would my HP warranty void if they find out I installed a pirated OS which arguably caused the hardware to fail?
View 5 Replies
View Related
May 7, 2009
I am using Acer Travelmate 8204WLMi laptop running the latest RC build of Windows 7. The internet connection is lost on both LAN adapter and WLAN (3945ABG) adapter when laptop is restored from a 'sleep' mode. I have disabled 'Power Management' of each adapter via the Device Manager. I have updated to the latest set of updates.
Disabling and re-enabling LAN or WLAN adapter to restore connectivity does not work (as it does in Win-XP). I have tried to 'log off' and log back in but this does not work either. I have discovered that the only way to restore connectivity is to re-boot the laptop.
It would appear that there is an issue of the Windows 7 code to correctly manage the LAN/ WLAN adapters. Has anyone else come across this problem?
View 5 Replies
View Related
May 22, 2011
See my sig for my system description. Windows 7 64 bit OS. ASUS P8P67 Pro B3 motherboard. i7 2600k CPU. Whenever I put my system to sleep or shut it down, and it comes back on on its own (for example, Vipre anti-virus turns the comp on at night to run virus scans), the system boots up just fine, but the keyboard, mouse and display don't do anything. I can't get a response. So I have to hold down the power button for 4-5 seconds to shut the system down and restart. Then everything works fine again.The mouse is a Logitech wireless (USB). The keyboard is Logitech wired (USB) gaming. The display is ASUS hooked up via HDMI to my video cards
View 1 Replies
View Related
Oct 31, 2009
A very minor question. I was wondering if it's possible to show the "Welcome Screen/Switch User" screen after the computer is woken up from screensaver or standby. I know it's really easy for a user to click on the "Switch User" button on the "lock page", but still I want to make it easy for my mom.
View 2 Replies
View Related
Jan 30, 2012
I have a refurbished Dell XPS 15 laptop from 5 months. Every time i resume my windows from sleep, after a few minutes i got different Blue Screen errors. I've re-installed my OEM windows, once (from recovery Partition) but still the same errors.I've attached my mini-dumps files, with the report and some screenshots.
View 1 Replies
View Related
Mar 2, 2012
For months I had Windows 7 installed and running without any incidents; I was using Microsoft Security Essentials. The other day I installed Win8, decided I hated it, and reformatted/installed Windows 7. This time I tried Avast 7 Free and things looked good for a while until I woke up my PC from Sleep mode then it crashed.
View 5 Replies
View Related
Nov 15, 2011
I have a Plextor 716-A DVD drive in my machine that's running Windows 7 32-bit, ASUS P5Q deluxe MB and 2 x SATA HDD's. The DVD drive is not found by Windows on start-up, it does not appear in My Computer or in Computer Management - basically Windows knows nothing about it.
The DVD drive is found in the BIOS and I can see it's being loaded during boot-up. I can use the drive as a bootable drive. The drive is only discovered by Windows when I enter and then resume from sleep mode or hibernation and works fine.
View 7 Replies
View Related
May 16, 2012
I just built a new computer and had it running stable for several days with all hardware except the graphics card and a new monitor. After plugging the new video card, I believe the system remained stable, but am not 100% confident since it only survived overnight. After plugging the new monitor (HP z2740w) and connecting via USB crashes started occurring when resuming from sleep.
I tried uninstalling the graphics drivers and the problem seems to have stopped for now, so I'm reinstalling to see if anything changes.
Windows 7 Pro 64 OEM (System Builder) Everything in the machine is brand new except the hard drives. Installation age is a few days.
View 3 Replies
View Related
May 29, 2012
I got a new monitor (Dell 2007wfp) and hooked it up to via VGA cable. I ordered a usb cable for it, and a DVI cable and then I went out of town for two weeks and completely unplugged all electronics including my computer. When I got back I installed the new cables, plugged everything back in, and the computer wouldn't start. The light on the PSU was flashing. I re-seated the PSU and then it came on just fine. Now every time my computer tries to resume from sleep I get a BSOD with the error "Bad_Pool_Caller".I have included the files requested in the instructions.
View 8 Replies
View Related
Jul 4, 2012
I don't know what's going on but everytime I try to set my computer to sleep, it doesn't resume anymore instead it restarts automatically.
View 1 Replies
View Related
Jul 22, 2009
When coming out of hibernation in Windows 7, I get the following error message:
"Your system's firmware did not preserve the system memory map across the hibernation transition. If you proceed with resume, your system could behave in an unexpected manner after resume completes. It is recommended that you save all your data and reboot after system resume finishes. Kindly check for a firmware update with your system vender as it may fix this problem."
Windows 7 continues to resume and I have not noticed any problems once it resumes.
I am dual booting Vista 64 bit SP2 and Windows 7 64bit on an HP DV3510NR. I recently flashed the latest bios version for my system dated May 2009.
I have no problem resuming from hibernation when booted into Vista. Has anyone else gotten this error message. Any thoughts on how to go about solving this?
View 9 Replies
View Related
Sep 16, 2012
About 75% of the time, when I lift the lid to resume my laptop from sleep, the laptop will not resume immediately. The screen will remain black, the wifi light stays disabled, and while I can hear the fan, nothing else really happens.Usually after anywhere from 3 to 20 seconds, though, the laptop will eventually wake up, and I believe it tends to be when the hard drive actually starts spinning -- the hard drive light will blink and I'll hear the faint 'click' of the hard diskThe resume used to be more or less instant. I've reformatted since I first noticed this problem, yet I still have it, which makes me think it might be a hardware issue
View 5 Replies
View Related
Nov 15, 2011
I have a Plextor 716-A DVD drive in my machine that's running Windows 7 32-bit, ASUS P5Q deluxe MB and 2 x SATA HDD's.The DVD drive is not found by Windows on start-up, it does not appear in My Computer or in Computer Management - basically Windows knowns nothing about it.The DVD drive is found in the BIOS and I can see it's being loaded during boot-up. I can use the drive as a bootable drive.The drive is only discovered by Windows when I enter and then resume from sleep mode or hibernation and works fine.I've gone through every article I could find on the Web from Mr Fix it to the Upper/Lower Filters regedit.
View 4 Replies
View Related
Jan 9, 2012
My computer took a little while longer booting tonight so I checked the error log and found the following:
- System
- Provider
[ Name] Microsoft-Windows-Diagnostics-Performance
[ Guid] {CFC18EC0-96B1-4EBA-961B-622CAEE05B0A}
[code]....
View 3 Replies
View Related
Mar 31, 2012
when i resume my pc from sleep the blue screen appears with some written stuff and my pc restarts. This has worried me alot and i would like to know a way i can fix it. Im using windows 7 64 bit.
View 2 Replies
View Related
