My computer took a little while longer booting tonight so I checked the error log and found the following:
- System
- Provider
[ Name] Microsoft-Windows-Diagnostics-Performance
[ Guid] {CFC18EC0-96B1-4EBA-961B-622CAEE05B0A}
[code]....
Basically my laptop has been having very high temperatures for a long time (usually ~60C for CPU and often 100-110 for GPU...insanely high, in other words) For example, see how hot the machine gets just by resuming from a sleep (this is all within a minute or so):I have been seeing the following error in event viewer each time I start Windows (4 entries) for some time:So today I bit the bullet and had the back cover off the laptop and noticed what a bad state the thermal compound was in, for both the CPU and the chipset chip, so wiped it off using TIM Cleaner, and then applied new thermal compound and put the laptop back together. I was actually shocked because for the first time since I can remember, I could feel cold air blowing from the vents of my laptop! I logged into Windows and noticed that my temperatures had fallen and were staying at around the below:Not as low as I'd like but a massive improvement. Trouble is, I am still getting the WHEA-Logger event errors in Windows Event Viewer ('processor core') and wondered if this was not in regards to overheating after all?The plus side is my laptop is now almost totally silent - the way it must have been when I bought it new 3 years ago! But I was wondering how to investigate these WHEA-Logger errors?PS - I think I accidentally got some TIM Cleaner spilt on the carpet. Might be nothing to worry about, but I did notice the "Harmful" hazard symbol on the bottle?
View 2 Replies View RelatedCan anyone help with the following errors in event viewer
Event ID 1001 DHCPv6-Client
Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x001C25E65B39. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.
Errors appear every 3 mins or so can you help fix please? has been happening sinc install.
Event ID 7000 Service Control Manager
The BANTExt service failed to start due to the following error:
The system cannot find the file specified.
Began this morning
Event ID 16385 Security-SPP
Failed to schedule SPPSVC for re-start at 2009-06-17T23:59:11Z. Error Code: 0x80070490.
Began 2 days ago
Event ID 2 Kernel-EventTracing
Session "Circular Kernel Context Logger" has failed to start with the following error(s) 0xC0000035
This has begun to appear this morning and every 2 or 3 mins
Clean install from Microsoft image and valid key from Microsoft.
I recently checked my event log and theres a huge list of warning, error, and critical events.
View 5 Replies View RelatedI started getting these about 6 months ago and they became especially noticeable while playing SWTOR back then. They seem to occur more often when playing an online game but also occur when browsing the web, see one of my screenshots to get an idea of the frequency.I checked the windows help page url... and I have no idea what they're talking about. I tried the simple fix which was disabling IPv6 (no luck). I dunno what a "spanning tree portfast" setting is on my router and I didn't want to go messing around with the registry for their first fix when I have no idea what I'm doing.The error seems kinda vague which I guess explains the multiple fixes, it has listed different URLs too, teredo is just the most recent, I looked that up when it first showed up and it was indeed something to do with IPv6.
View 1 Replies View RelatedI just bought a new ASUS laptop with Windows 7 and I am so disapppointed. I got an error on reboot after updating Windows. I get hangs all the time. Application consitantly stop responding. The event log is chalk ful of errors, some dated from before I even bought this computer.
I attached a screenshot of the event log. I suspect there is more than one thing wrong. I expect an out of the box product to work. I am so upset and am about to return this and go mac..
i am getting atapi errors in event viewer, the other day my monitor would not come out of power save mode. i have tester bother my hard drives and they pass. i have also checked my cables and they are fitted ok. i have never had this before and do not know what to do.
View 1 Replies View RelatedHow can I delete event errors in my event viewer? 41,000 event viewer events? Is that bad??
View 1 Replies View RelatedEvent viewer of 17,264 warning and errors
View 4 Replies View RelatedI have Win 7 installed and working (built from the Dell OEM DVD - Home Edtion 64 bit). I have all the 80 + updates/patches downloaded and installed Everything is working good. My main partition is Drive C (system/boot/active) and I have an image backup of it stored on another drive My data partition is Drive D and I have file backups for it on another drive Issues. All is good except on restarts, I get chkdsk / drive consistency problems. In the event I cannot clear out the errors, I may need to reformat Question - Which, if any, of the two options should I go with.
OPTION 1
1) Boot from Win 7 OEM DVD
2) Select Custom/Advanced/Format
3) Let Win 7 format the drive and install clean.
4) But then blow away the WIn 7 version and recover Win 7 SP1 from the image backup
Or Option 2
1) Boot from WIn 7 OEM DVD (same as Option 1)
2) Select Custom/Advanced/Format (same as Option 1)
3) Let Win 7 format the drive and install clean. (same as Option 1)
4) And then continue from there ,ie start all over again to reload all the windows updates.
Every 7 minutes this error is logged in event viewer.
I have wired connection disabled, wireless connection works fine. It actually works much better than it did with XP Pro. Lan transfers are much faster.
What's causing this and how to stop it?
Friends I have two repetitive errors routinely showing up in my System Event log. I believe these to be Windows 7 networking policy errors in that it does not deal with a missing workgroup member correctly, but I could be wrong, obviously.
View 3 Replies View RelatedI'm having a problem with the Windows 7 CD burner when trying to burn a data CD-R or CD-RW in Mastered (CDFS) format (Windows 7 Home Premium 64-bit). Whenever I use a new or blank disc and then select the Mastered option, when I re-insert the CD after burning it says it's in UDF format. What is more, I then have problems trying to open or copy files from the CD - files won't open.
Bad block errors in the event viewer etc. These errors are seen when trying to use the CD on any computer, including the one it was recorded on, and I've tried several different makes, types and speeds of disc. I can record in CDFS format using the Windows 7 CD burner if the CD already contains files which were recorded in that format using a 3rd party application or another computer.
This is happening on two Windows 7 computers. I have considered using the Live File format (UDF) instead, but when using Windows 7's burner to format the disc it reduces its capacity by about 130MB and the data won't fit any more. I know I can use other CD burning software (and already do), but there are occasions when the Windows burner is the simplest option, so I'd like to get it to work properly.
I bought a Sony Vaio VPCZ227GG almost 2 months back and its been running perfectly until the last week. There have been no hardware updates, system installs etc. only the recommended Sony Vaio Care driver updates.I will be using the laptop for a while and then it will just crash. The laptop stays on the screen it was on before the crash but the mouse, keyboard, basically everything is dead. The only way to cycle it is to power down.
System Spec:
Windows 7-64 bit Came preinstalled
Intel� Core� i7-2640M Processor 2.80 GHz with Turbo Boost up
8GB Ram
256 SSD Drive
Intel Onboard Graphics
AMD Radeon External Graphics via Media Dock
Full Retail
Hardware and OS less than 2 months old.
I can no longer leave my pc on overnight or it freezes. If I run more than 2-3 programs it freezes. I was watching a video once with headphones on and heard a loud noise then freeze.I at first thought it was just one of my hard drives dying because I had similar symptoms before I removed it. But, the fact that the crashes are happening more frequently without accessing the questionable e: has me stumped.Then I figured maybe it was the overclock I did in my bios. But, restoring it to normal has had little effect on the performance of my machine.I have run and run on an almost daily basis the following: All updated daily or when available.
Microsoft security essentials
Superantispyware
Malwarebytes
CCleaner
JV16 power tools 2011
[code]....
As of recently, I just upgraded my system to the following configuration:
Intel i5 2500K 1155 socket CPU
Gigabyte Z68A-D3H-B3 revision 1.3 mobo
8GB Corsair Vengeance DDR3 1600 RAM
(2) 60GB OCZ Solid 3 SSDs (One for each partition that I'm running on my system)
2TB Western Digital SATA HDD
nVidia GeForce GT430 2GB DDR3 graphics card
Rosewill RD 500-2SB 500 Watt PSU
Rosewill Challenger Mid-Size ATX case
Prior to installing the software, I had tested the memory, CPU, HDDs, everything. All checked out OK. My system hosts two SSDs to run two partitions: One is Windows 7 Ultimate 64-bit, the other being Windows XP Professional 32-bit. The additional 2TB HDD is basically to store the tons of data that I have on, and I use the Windows 7 My Documents folders to have everything map to the HDD to acquire my data, download to it, etc.
The issue that I seem to be running into, is that every time I load up the Windows 7 partition, no matter how long I leave everything running, if per say I was to leave it running overnight, when I wake up in the morning, it will show that the PC has rebooted. Upon checking the event viewer, I am seeing multiple entries specifying that the error was caused by a kernel-power error, listed as event 41. Reviewing this info, I later noticed that it was causing a bugcheckcode of 265 everytime the issue occurs.
Ideally, I would like to think that it was hardware related, or driver related, as it mostly occurs when I play movies or videos, but when I boot the Windows XP partition, I never come across any of these issues whatsoever. Granted, the XP partition is used primarily for work when I do remote stuff from home, but granted I want to watch a movie on it I can also. Also, when loading the eventvwr on the XP partition, no kernel-power entries are listed. So clearly, this is occuring on the Windows 7 partition, and not the Windows XP partition. Since I dont really think this is due to hardware issues.
I was going to going to reinstall windows 7 professional x64 version of windows in my laptop but during installation I got structed at the point where the earlier partitions are to be deleted and new ones are to be made(I got the option from custom install) to give the path for new C:// drive and others. Here is the basic of problem, the installation was taking very long time to delete my earlier partitions(nearly 30 mins.). So I derectly pressed the power button and shut down (while the deletion of earlier C:// drive was going on) my laptop eject the DVD on next boot, but now nothing was appearing after booting. So I again tried to do the same installation but this time the installation was stucked at the windows icon ('Starting Windows' Icon).
View 1 Replies View RelatedWindows 7 home premium, 64-bit HP Envy 3D laptop with 8GB memory, no custom hardware
I have configured a backup job which wakes up the laptop at midnight, takes a backup and puts laptop into standby again. All this happens with the laptop lid closed. The power scheme is configured to put laptop into standby when lid is closed.
The resume from standby, backup and suspend after backup is controlled by Windows Home Server (2003) console which is installed on the laptop. I had purchased the HP laptop in October of last year and this job used to work just fine. Sometime in March of this year, the backup stopped working.
After checking the logs and physically observing the laptop at midnight, I found that the laptop resumes from standby at the scheduled time but immediately goes into standby if the lid is closed. The backup fails. Windows event logs indicate that laptop lid close action is putting system into standby.
If the lid is open, then the laptop resumes from standby, stays awake, backup proceeds and laptop goes into standby again.
Here are my problems:
a) Why did the backup work for several months and then stopped working?
b) I have other laptops in the house running Windows 7 home premium on variety of hardware (all HP) and they do not have any issue. Even with the lid closed, they resume from standby, do a backup and go into standby again. The power scheme on all these laptops is set to put laptop into standby when lid is closed. I have verified from physically observing the laptops during backup time.
I have checked all the usual suspects like BIOS updates, driver updates, run sfc, completely deleted the Windows Home Server console from laptop and re-installed after deleting all past backups. Is there some setting that I have overlooked?
Problem:
Computer rarely restarts during the time I am using it. It restarts if I leave stuff downloading overnight or if I leave on during the day. I then have to re-install any software I installed the previous time because it says it was shutdown improperly ( CRASHED).
I then check the Event logger and see it has multiple crash reports.
Shows as
Level: Critical
Source: Kernal-Power
Event ID: 41
Task Category: 63
I show 20 of these crashes so far and I just built the system yesterday. I need help in determining what could be causing this. The motherboard? Old Videocard? Windows 7? 64 Bit platform? Any thoughts?
I just built a brand new i7 920 System.
Specs:
i7 920 ( Stock Speed )
Asus P6T SE Motherboard
Windows 7 Pro 64 Bit
Power Supply Antec 750W Modular PSU
CPU Cooler: Zalman CNPS 10X Extreme
Samsung DVD burner
Seagate 1TB Drive 7200 RPM's
RAM: Kingston Hyper X 6GB of DDR3 @ 16000MHZ ( stock also) KHX1600C8D3K3/6GX
All parts are brand new except for the videocard which is a NVIDIA Geforce 7300 GS
This has been popping up in my event log and preplexing me... I want to get rid of it, but don't know what exactly is generating it and wondering if anyone has any insight...
Log Name: System
Source: Microsoft-Windows-DNS-Client
Date: 1/26/2012 9:21:14 PM
[Code].....
I have a refurbished Dell XPS 15 laptop from 5 months. Every time i resume my windows from sleep, after a few minutes i got different Blue Screen errors. I've re-installed my OEM windows, once (from recovery Partition) but still the same errors.I've attached my mini-dumps files, with the report and some screenshots.
View 1 Replies View RelatedFor months I had Windows 7 installed and running without any incidents; I was using Microsoft Security Essentials. The other day I installed Win8, decided I hated it, and reformatted/installed Windows 7. This time I tried Avast 7 Free and things looked good for a while until I woke up my PC from Sleep mode then it crashed.
View 5 Replies View RelatedI have a Plextor 716-A DVD drive in my machine that's running Windows 7 32-bit, ASUS P5Q deluxe MB and 2 x SATA HDD's. The DVD drive is not found by Windows on start-up, it does not appear in My Computer or in Computer Management - basically Windows knows nothing about it.
The DVD drive is found in the BIOS and I can see it's being loaded during boot-up. I can use the drive as a bootable drive. The drive is only discovered by Windows when I enter and then resume from sleep mode or hibernation and works fine.
when turning on computer i get "resuming windows" then a black screen it will not let me start up in safe mode either
View 1 Replies View RelatedWhen I turn on the laptop (Dell Inspiron) it gets to the Resuming Windows screen then goes to a blank screen and then hangs forever.
There is just a blank black screen and the mouse cursor. I can move the mouse cursor but there is nothing to click on. F8 does't seem to take me into safe mode or anything like that.
I can get into bios and boot menu before it gets to the Resuming Windows screen but don't know what to do there.
I just built a new computer and had it running stable for several days with all hardware except the graphics card and a new monitor. After plugging the new video card, I believe the system remained stable, but am not 100% confident since it only survived overnight. After plugging the new monitor (HP z2740w) and connecting via USB crashes started occurring when resuming from sleep.
I tried uninstalling the graphics drivers and the problem seems to have stopped for now, so I'm reinstalling to see if anything changes.
Windows 7 Pro 64 OEM (System Builder) Everything in the machine is brand new except the hard drives. Installation age is a few days.
I got a new monitor (Dell 2007wfp) and hooked it up to via VGA cable. I ordered a usb cable for it, and a DVI cable and then I went out of town for two weeks and completely unplugged all electronics including my computer. When I got back I installed the new cables, plugged everything back in, and the computer wouldn't start. The light on the PSU was flashing. I re-seated the PSU and then it came on just fine. Now every time my computer tries to resume from sleep I get a BSOD with the error "Bad_Pool_Caller".I have included the files requested in the instructions.
View 8 Replies View RelatedI don't know what's going on but everytime I try to set my computer to sleep, it doesn't resume anymore instead it restarts automatically.
View 1 Replies View RelatedWhen coming out of hibernation in Windows 7, I get the following error message:
"Your system's firmware did not preserve the system memory map across the hibernation transition. If you proceed with resume, your system could behave in an unexpected manner after resume completes. It is recommended that you save all your data and reboot after system resume finishes. Kindly check for a firmware update with your system vender as it may fix this problem."
Windows 7 continues to resume and I have not noticed any problems once it resumes.
I am dual booting Vista 64 bit SP2 and Windows 7 64bit on an HP DV3510NR. I recently flashed the latest bios version for my system dated May 2009.
I have no problem resuming from hibernation when booted into Vista. Has anyone else gotten this error message. Any thoughts on how to go about solving this?
About 75% of the time, when I lift the lid to resume my laptop from sleep, the laptop will not resume immediately. The screen will remain black, the wifi light stays disabled, and while I can hear the fan, nothing else really happens.Usually after anywhere from 3 to 20 seconds, though, the laptop will eventually wake up, and I believe it tends to be when the hard drive actually starts spinning -- the hard drive light will blink and I'll hear the faint 'click' of the hard diskThe resume used to be more or less instant. I've reformatted since I first noticed this problem, yet I still have it, which makes me think it might be a hardware issue
View 5 Replies View RelatedEvery time my dell laptop is in sleep mode for a while - and there is still plenty of battery left it seems to "resume windows" and it's like a startup. Shouldn't it just ask for my password and be there right away?
View 3 Replies View Related