Message Appears Resuming Windows When Turn On PC
Jun 9, 2011
I have a Dell laptop that I went to turn on. The message "Resuming Windows" came on for about 5-10 seconds, then the computer turned off. Now when I press the power button nothing happens. No lights no noise nothing. I'm hoping its just stuck in sleep mode or something.
View 5 Replies
ADVERTISEMENT
Nov 7, 2011
My adapter is always gone from resuming from sleep. I know it was working before. Just changed my ram and bios settings from a fresh build. Went from Corsair xms3 to G.Skill Ripjaws.
I am having this same issue with my newly built pc. The drive running Windows 7 is from a laptop where the mobo died. I am using it in AHCI mode because my case has a front hot swap caddy.
I have a Gigabyte Z68X-UD3H-B3 mobo and after installing and uninstalling drivers, software, changing settings, removing ram, changing power options to maximum power for pci card and wifi, turning off hibernate, restarted, rebooted, updated all drivers from Gigabyte, chipset drivers, etc. I have unchecked "allow Windows to turn off this device". Restarted and tested and I get the same issue. I have unchecked this box in all of my networking devices too including, 802.11n Wireless Lan Card #2 and Microsoft Virtual Wifi Miniport Adapter. Also, uninstalled and reinstalled these and updated drivers from my disc that came from Gigabyte as well as driver update from the Gigabyte website.
Nothing I do will turn on my wifi card after sleep. Windows will not see a network adapter. Everything works fine after restarting though. I have S3 enabled in bios as that is what I want. I have case fans that I don't want to hear with no option to turn them off. Otherwise, i'd be fine with S1.
Is this just not a working feature? I've read that sleep is an ongoing issue with Windows, but my pc sleeps fine. I just want to be able to put my pc to S3 sleep and resume with a working wifi card. There must be a key setting i'm missing because i'm sure it was working with my last set of ram.
View 2 Replies
View Related
Jul 22, 2009
When coming out of hibernation in Windows 7, I get the following error message:
"Your system's firmware did not preserve the system memory map across the hibernation transition. If you proceed with resume, your system could behave in an unexpected manner after resume completes. It is recommended that you save all your data and reboot after system resume finishes. Kindly check for a firmware update with your system vender as it may fix this problem."
Windows 7 continues to resume and I have not noticed any problems once it resumes.
I am dual booting Vista 64 bit SP2 and Windows 7 64bit on an HP DV3510NR. I recently flashed the latest bios version for my system dated May 2009.
I have no problem resuming from hibernation when booted into Vista. Has anyone else gotten this error message. Any thoughts on how to go about solving this?
View 9 Replies
View Related
Apr 22, 2012
Error message appears every now and then when start Windows 7
View 1 Replies
View Related
Apr 27, 2011
I have looked on my windows live mail for an area to stop my emails from opening immediately. Everytime I open my email the body of the message appears immediately.I don't want that
View 5 Replies
View Related
Jul 26, 2011
I recently installed code blocks C compiler on my win 7 PC.
It worked fine for a day or so but will now not launch. An error message appears stating that file 'mingwm10.dll is missing'
View 1 Replies
View Related
Sep 15, 2012
It has been a year or so since I got my computer with a full running copy of Windows 7 Ultimate...All of a sudden after about 6 months of owning the computer i get a message when i turn my computer back on saying Windows 7Build 7601This copy of windows is not Genuine.I bought this computer from a guy my friend knew and now i feel like i got ripped off because of this...Is there any way to fix it... tried to contact Microsoft...unresponsiv
View 8 Replies
View Related
Sep 8, 2010
After a Windows update today I noticed when I went to turn off my PC that there was some sort of Message pop up on the Desktop just before it shut Down. I was unable to read it so I did another restart and shut down and again got something that pop up on the Desktop again just as it shut down and I dont have a clue what it is
View 1 Replies
View Related
Dec 10, 2009
I'm not sure this is the right place to post, but, I get a message on start up to turn on action center, this was on before, I think I may have disabled it, and I don't know how to reset it.
View 4 Replies
View Related
Feb 5, 2012
Unable to play DVDs message states not possible to turn on analog copy protection on the output display.
View 1 Replies
View Related
Apr 17, 2011
Is there a registry setting or option to turn off the message "other users are logged on" you get when you try to turn off or restart/ Windows 7, vista, xp etc? Whats a "quite command"?I guess I'm looking for no warning even if other users are logged on and multi RDP.Also where are the settings to turn on or off the various windows warning messages and notices? (I'm NOT referring to the "action center" messages).I'm doing a lot of virtual testing and multi RDP etc.Also how do you go through 2 subnets, where one is a virtual VMWare subnet Real PC -> Physical router (ADSL Modem Internet gateway) 1 -> Physical sub router 2 -> VMware subnet router -> VMWare workstation.
View 6 Replies
View Related
Apr 4, 2010
I have disabled the search indexing service, & would like to know is it possible to disable the message bar that pops up every time I use advanced search."Your searches might be slow because the index is not running. Click to turn on the index.
View 2 Replies
View Related
Nov 22, 2011
when turning on computer i get "resuming windows" then a black screen it will not let me start up in safe mode either
View 1 Replies
View Related
Apr 29, 2012
When I turn on the laptop (Dell Inspiron) it gets to the Resuming Windows screen then goes to a blank screen and then hangs forever.
There is just a blank black screen and the mouse cursor. I can move the mouse cursor but there is nothing to click on. F8 does't seem to take me into safe mode or anything like that.
I can get into bios and boot menu before it gets to the Resuming Windows screen but don't know what to do there.
View 2 Replies
View Related
Nov 9, 2010
Every time my dell laptop is in sleep mode for a while - and there is still plenty of battery left it seems to "resume windows" and it's like a startup. Shouldn't it just ask for my password and be there right away?
View 3 Replies
View Related
Jan 25, 2013
System Spec:64 bit- I built the machine August 2010, I have not reinstalled the OS since. Full Retail Version of Windows 7.I have been experiencing problems with this machine since about a month after I built it in August 2011. At first I would get a BSOD just every once in a while. I am at architecture school and I didn't have time to address the issue, so I just kept a diligent written log of every time I noticed it happening. I have included that as an attachment. You'll notice that there was not an obvious trigger - it would not crash as soon as I opened something, or as soon as I tried to use the sound card. It would happen both while I was working in Adobe Illustrator, and when I left my computer idle to go grab a cup of coffee or something like that. I have included all the dump files I have as attachments.Recently, however, Windows has had trouble resuming. I can't figure out exactly what is happening because it hasn't happened while I was at my computer yet. But, pretty much every time I return to my computer after a 10 minute absence, I come back to a black screen with a blinking white underscore in the top left corner. I think it has something to do with the machine going to sleep and having trouble resuming windows.
Another clue, which I've researched a little bit, is that I think I heard a single beep the other day. Granted, I'm in a studio with 50 other people and there are cellphones, headphones tons of computer and all kinds of noise, but I'm sure enough about what I heard to include it here. The forums I checked suggested this was a problem with the RAM.Here is a list of the components from the NewEgg invoice:
[code]...
View 2 Replies
View Related
Jan 23, 2012
My Windows 7 is:- x64 Home Premium SP1- the original installed OS on the system.- an OEM version. Came pre-installed on system.- The age of system (hardware) is 8 Months.- The age of OS installation is 8 Months.- Never re-installed.Hardware is:Sony VAIO VPC-EB46FXIntel Core i5 CPU M480 @2.67GHz
View 3 Replies
View Related
Jan 30, 2012
I have a refurbished Dell XPS 15 laptop from 5 months. Every time i resume my windows from sleep, after a few minutes i got different Blue Screen errors. I've re-installed my OEM windows, once (from recovery Partition) but still the same errors.I've attached my mini-dumps files, with the report and some screenshots.
View 1 Replies
View Related
Mar 2, 2012
For months I had Windows 7 installed and running without any incidents; I was using Microsoft Security Essentials. The other day I installed Win8, decided I hated it, and reformatted/installed Windows 7. This time I tried Avast 7 Free and things looked good for a while until I woke up my PC from Sleep mode then it crashed.
View 5 Replies
View Related
Nov 15, 2011
I have a Plextor 716-A DVD drive in my machine that's running Windows 7 32-bit, ASUS P5Q deluxe MB and 2 x SATA HDD's. The DVD drive is not found by Windows on start-up, it does not appear in My Computer or in Computer Management - basically Windows knows nothing about it.
The DVD drive is found in the BIOS and I can see it's being loaded during boot-up. I can use the drive as a bootable drive. The drive is only discovered by Windows when I enter and then resume from sleep mode or hibernation and works fine.
View 7 Replies
View Related
May 16, 2012
I just built a new computer and had it running stable for several days with all hardware except the graphics card and a new monitor. After plugging the new video card, I believe the system remained stable, but am not 100% confident since it only survived overnight. After plugging the new monitor (HP z2740w) and connecting via USB crashes started occurring when resuming from sleep.
I tried uninstalling the graphics drivers and the problem seems to have stopped for now, so I'm reinstalling to see if anything changes.
Windows 7 Pro 64 OEM (System Builder) Everything in the machine is brand new except the hard drives. Installation age is a few days.
View 3 Replies
View Related
May 29, 2012
I got a new monitor (Dell 2007wfp) and hooked it up to via VGA cable. I ordered a usb cable for it, and a DVI cable and then I went out of town for two weeks and completely unplugged all electronics including my computer. When I got back I installed the new cables, plugged everything back in, and the computer wouldn't start. The light on the PSU was flashing. I re-seated the PSU and then it came on just fine. Now every time my computer tries to resume from sleep I get a BSOD with the error "Bad_Pool_Caller".I have included the files requested in the instructions.
View 8 Replies
View Related
Jul 4, 2012
I don't know what's going on but everytime I try to set my computer to sleep, it doesn't resume anymore instead it restarts automatically.
View 1 Replies
View Related
Sep 16, 2012
About 75% of the time, when I lift the lid to resume my laptop from sleep, the laptop will not resume immediately. The screen will remain black, the wifi light stays disabled, and while I can hear the fan, nothing else really happens.Usually after anywhere from 3 to 20 seconds, though, the laptop will eventually wake up, and I believe it tends to be when the hard drive actually starts spinning -- the hard drive light will blink and I'll hear the faint 'click' of the hard diskThe resume used to be more or less instant. I've reformatted since I first noticed this problem, yet I still have it, which makes me think it might be a hardware issue
View 5 Replies
View Related
Nov 15, 2011
I have a Plextor 716-A DVD drive in my machine that's running Windows 7 32-bit, ASUS P5Q deluxe MB and 2 x SATA HDD's.The DVD drive is not found by Windows on start-up, it does not appear in My Computer or in Computer Management - basically Windows knowns nothing about it.The DVD drive is found in the BIOS and I can see it's being loaded during boot-up. I can use the drive as a bootable drive.The drive is only discovered by Windows when I enter and then resume from sleep mode or hibernation and works fine.I've gone through every article I could find on the Web from Mr Fix it to the Upper/Lower Filters regedit.
View 4 Replies
View Related
Jan 9, 2012
My computer took a little while longer booting tonight so I checked the error log and found the following:
- System
- Provider
[ Name] Microsoft-Windows-Diagnostics-Performance
[ Guid] {CFC18EC0-96B1-4EBA-961B-622CAEE05B0A}
[code]....
View 3 Replies
View Related
Mar 31, 2012
when i resume my pc from sleep the blue screen appears with some written stuff and my pc restarts. This has worried me alot and i would like to know a way i can fix it. Im using windows 7 64 bit.
View 2 Replies
View Related
Jun 19, 2012
Daugher's laptop from after she downloaded something. I know something about computers so figured I'd run some virus scans, clean it up a bit etc. But I can't get it to stop resuming. I've even taken the battery out. I need it to reboot. I need it to not load up in the same frozen state. I used xp on my computer so not knowledgeable about windows 7. I cannot afford to bring to a tech and have never needed to all my years online.
View 3 Replies
View Related
Nov 19, 2011
My new Dell is stuck in 'resuming windows' and I have tried everything I could find on-line, but nothing works. Have tried F8 but can not get into Safe Mode. Did the diagnostics, but all okay. Alt, ctl, delete does nothing. Now when I power up it freezes on the Dell splash screen then says Hard-disk drive failure. Strike f1 to continue, f2 to run setup utility. If I hit ft I get: No boot device available, Press any key to reboot the system. Then it goes through the Dell splash screen and resuming windows, then black screen. When this started I had a music cd in the drive and accidentally powered it on. When it came up to the password screen I typed in my password but the 'enter' key would not work. On the monitor there were two little red squares at the bottom right and a blue one with a circle in it on the bottom left (something like that anyway... trying to remember). I had never seen these before... Don't know if this had anything to do with what is going on. It was locked up so I powered it off, back on and now keep getting resuming windows.
View 2 Replies
View Related
Dec 15, 2011
My adapter is always gone from resuming from sleep. I know it was working before. Just changed my ram and bios settings from a fresh build. I am having this same issue with my newly built pc. The drive running Windows 7 is from a laptop where the mobo died. I am using it in AHCI mode because my case has a front hot swap caddy. I have a Gigabyte Z68X-UD3H-B3 mobo and after installing and uninstalling drivers, software, changing settings, removing ram, changing power options to maximum power for pci card and wifi, turning off hibernate, restarted, rebooted, updated all drivers from Gigabyte, chipset drivers, etc. I have unchecked "allow Windows to turn off this device". Restarted and tested and I get the same issue. I have unchecked this box in all of my networking devices too including, 802.11n Wireless Lan Card #2 and Microsoft Virtual Wifi Miniport Adapter. Also, uninstalled and reinstalled these and updated drivers from my disc that came from Gigabyte as well as driver update from the Gigabyte website.
Nothing I do will turn on my wifi card after sleep. Windows will not see a network adapter. In device manager, there is no wireless card, even after showing hidden devices. Adding a device does not discover it. Installing the network card driver and software does nothing to detect it. Windows thinks there is no device connected. Everything works fine after restarting though. I have S3 enabled in bios as that is what I want. I have cpu fan that I don't want to hear with no option to turn them off. Otherwise, i'd be fine with S1. Is this just not a working feature? I've read that sleep is an ongoing issue with Windows, but my pc sleeps fine. I just want to be able to put my pc to S3 sleep and resume with a working wifi card. There must be a key setting I'm missing because I'm sure it was working with my last set of ram.
View 7 Replies
View Related
Apr 2, 2012
I have got an HTPC/Server that has a lot of hard drives in it. The OS is run off a SSD and of all the hard drives, the one that really gets used is 1.5TB WD drive for recording of the television.
I have set Windows up so it turns off hard disks off after 20 minutes if they are not being used which is fine, but my problem is that my computer automatically goes into Sleep Mode (S3 hybrid sleep) when it is not recording anything and when it wakes up all the hard drives spin back up.
Is there any way to keep hard drives spun down even when resuming from sleep?
View 5 Replies
View Related