Screen Won't Wakeup On Reboot But Computer Boots Without It?
Sep 16, 2012
If I reboot my desktop goes thru the procedure but the monitor stays black - nothing, not even the safety screen and no cursor. There is an amber light on the monitor which goes green when it receives its wake up call but it remains amber. I have to switch the power off entirely before switching it on again, and rebooting and this time the screen works. I've run scandisk, I've gone thru scannow, I've installed the latest graphics card drivers. I've tried changing the power settings. Bear in mind that this set up and computer has worked perfectly for 2 years and as all the hardware is working I believe it to be a software issue.
View 1 Replies
ADVERTISEMENT
May 18, 2012
my computer boots up to a black screen with a mouse. The problem is, when I boot from anything or into any option I get this. Safe Mode gets me black screen, so does booting from a Win 7 Recovery disk, everything puts me in a black screen with cursor. At first it will show Windows logo on the screen, with loading bar, then cuts out, and cursor pops up. That's it.Also, when I try to boot normally, it hangs at Windows logo, then flashes a quick blue screen then reboots.
View 1 Replies
View Related
Oct 7, 2012
but I was given it used from the previous owner and later found out it was refurbished. It is a Gateway NV53A. I have always had issues with BSOD's and Windows errors, and most of them either driver or memory related. I fixed and updated all drivers, but never did anything about memory except maybe some tests and they all came out fine. 3 days ago, I was using my PC just browsing a Web page and suddenly the screen went black. I thought it was the lcd, but I closed the lid to see if it would go into standby mode and it just stood there powered on and frozen... The only way it would react was if I manually turned it off holding power button.
Sometimes it does boot up, sometimes it gets farther than others. What I mean is, sometimes it gets past the Gateway logo and crashes there, sometimes it boots up to to the home screen, and sometimes it doesn't even boot... How far it gets depends on how long the PC has been turned off. Odd I know... Anyways, I found out my motherboard requires ram with 1066mhz fsb whereas the current ram sticks it has installed are 800mhz.... I was told new ram with 1066mhz would fix my issues and allow my PC tu boot and run fine as it always did, but I just wanted to be sure that's my Issue, and I also wanted to know how come the computer ran fine (with the exception of BSOD's and some errors occurring every now and then) before and now suddenly I'm screwed. I'm currently using two 2GB DDR3 Ram memory sticks. The brand and model of each stick is Nanya nt2gc64b88b0ns-cg
View 2 Replies
View Related
Feb 18, 2012
my computer boots up and after log-in the welcome comes on, then my screen turns blue. i can move the cursor but nothing shows...it works fine in safe mode?
View 1 Replies
View Related
May 4, 2012
My computer boots up fine. All programs work fine. While I'm not using it (at least it hasn't happened while I'm using it) I hear it beep once and when I go to check the computer the screen wont show any picture, it's like the monitor is on but the PC is off.PC light is still on, hard drive still spinning and the fans are still on.I have to reset the PC and I get the "Windows was not properly shut down" message upon reboot.
View 5 Replies
View Related
Sep 4, 2009
I have a problem with the hybrid sleep mode.
Whenever I try to put my notebook in sleep mode everything works ok, also normally waking up the system.
But when I disconnect the power cord and restart the system, Windows tries to resume its state but suddenly stops with a black screen and a blinking cursor.
I have absolutely no problems with normal sleep and normal hibernate (shutdown -h).
For a short time hybrid sleep worked only when I put the system to sleep with the notebook FN keys, but not through the Win start menu.
Now it doesn't work at all. Maybe this was also just a coincidence.
Can anyone help me?
View 8 Replies
View Related
Oct 31, 2009
A very minor question. I was wondering if it's possible to show the "Welcome Screen/Switch User" screen after the computer is woken up from screensaver or standby. I know it's really easy for a user to click on the "Switch User" button on the "lock page", but still I want to make it easy for my mom.
View 2 Replies
View Related
Dec 15, 2012
My current error is "Reboot and Select proper Boot device or Inser Boot Media in selected Boot device and press a key". I took a picture of two different messages that appeared previous to this continuous message. If someone is able to help I can text or E-mail the pictures of the previous errors. I am on a laptop at the moment and the computer that is sick is my desktop.
View 2 Replies
View Related
Apr 7, 2011
I disable the SATA in window 7 after that i am trying to open window but the message "reboot and selectproper bootdevice or insert boot media in selected boot device and press key" is diplay. setup also not open
View 1 Replies
View Related
Feb 25, 2012
I have a gaming laptop asus g71g with windows 7 loaded on it. When I try to boot up it gets to right before the windows symbol would load and the screen just goes black but the comp stays on.
View 1 Replies
View Related
Sep 14, 2010
A few weeks back the PC would not wake up from it's sleep mode so I turned it off and it fixed the problem but now when I turn the PC on it boot's and I hear the 'MS jingle' but I am looking at a black screen, after hitting the restart button it start's up and I get the massage the PC was not closed down properly what mode do I wish to start it in, I have checked the task manager before closing down a number of times and there has been nothing running at close down?
View 8 Replies
View Related
Oct 8, 2009
SO i jsut got a limited edition windows 7 ultimate 64bit cd and i previously has windows 7 64bit rc installed and when i install the disc i just got it installs fine and everything but when it restarts it goes to the finishing installation and then it starts to boot up but gets stuck at blk screen with the mouse. I have had this problem before with windows 7 rc but all i had to do was just start it in safe mode then shut it down from there and start it back up it normal mode and it worked, but this i cannot do that.
I go to safe mode and it goes to applying settings screen (doesnt do this in normal mode like it should) but it says it cannot finish this in the safe mode... so yeah... I am getting pretty mad because this is the final version of the software and it shouldnt have this problem.
View 7 Replies
View Related
May 18, 2012
I just purchased a new motherboard, processor, RAM, and power supply for my Desktop. I have been trying to boot the computer using my hard drive from my old setup which had Windows 7 on it. Whenever the computer boots it goes from the bios screen to the Windows Boot page with the logo but then it goes straight to a Blue Screen. When the Blue Screen comes up it only flashes for a tenth of a second and then restarts so I can not read it. The same thing happens when I try to boot the computer in safe mode.
View 3 Replies
View Related
Jan 28, 2012
when i first turn on my computer it makes a clicking sound then i get a black screen with just the mouse cursor, if i restart if it works fine, it does this every time if its off a hour or so. its a dell insperon 560 desktop less than a year old, ive spend 3 or 4 hrs will dell tech on phone to no avail, they have tried all kinds of repairs? i think its the hard drive and they are trying to patch it till im out or warranty 28 days left.
View 2 Replies
View Related
May 28, 2012
I recently formatted my main drive (upgrading from Vista to Win. 7), and it worked perfectly.It asked to install some updates, including my graphics card and everything else.Then it restarted, and updated a few registry settings ( I think somewhere around 5600-56000, alot more than a few lol), and it black screened when it came to the login screen. I tried logging in, and I could hear the sounds and everything else, so I think it's the graphics card that's the problem.I tried booting into safe mode and uninstalling/reinstalling the graphics driver, but it still black screened.I checked almost every other topic about this, and I tried everything but it didn't work, but i'm still open to more common suggestions.
Right now, i'm just running on the on-board graphics in normal boot mode.System Specs:OS Version: Microsoft Windows 7 Home Premium, 64 bitProcessor: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz, Intel64 Family 6 Model 23 Stepping 7Processor Count: 4RAM: 6078 MbGraphics Card: NVIDIA GeForce GT 120, 1024 MbHard Drives: C: Total - 280139 MB, Free - 253850 MB; D: Total - 420255 MB, Free - 420153 MB;Motherboard: Acer, EG45MAntivirus: None, I will be adding Kaspersky later.
View 1 Replies
View Related
Jul 17, 2012
Basically I woke up this morning to my computer sitting at a black screen with the cursor visible I'm able to move the cursor but do nothing else I rebooted my computer my manually shutting it off and then it started up as it would normally but did this disc check:[URL]from there it moves back to the black screen with the cursor I again restarted and booted in safe mode this time I was then able to reach windows and tried to do a system restore to an earlier point When i did this i was greeted with this error [URL]Finally here is my harddrive just in case [URL]I exported my full system info so please let me know if more info is necessary
OS Name Microsoft Windows 7 Professional
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name *****
System Manufacturer INTEL_
[code]....
View 8 Replies
View Related
Aug 25, 2012
I am using w7 ultimate with a GT 9600 Nvidia GPU, connected to a samsung 22" wide screen via a HDMI cable, when I boot up the OS loads the startup screen in the old Vista format instead of the new W7 screen. It appears that my issue is the initial low resolution output via the HDMI cable. I have tried a DVI cable onto anther screen and the issue is not present as the new 3 ball bootup screen appears. Is there any way that I can tell the OS and or the GPU to start up immediately in a higher resolution which will enable the W7 newer boot screen.
View 9 Replies
View Related
Sep 27, 2012
I turned on my computer tonight and before booting it started scrolling text saying deleting corrupted files and scanning files etc...this went on for at least 10-15 minutes and then when it was done it said "Starting Windows" like normal, then brought me to a black screen that said "Preparing to configure windows...do not turn off your computer". That message disappeared after a few seconds and left me with a black screen with a mouse cursor. In the bottom right hand corner of the screen is a power button, bottom left is ease of access button and bottom center it says Windows 7 Home Premium.
I can't do anything with this. I've restarted numerous times, and I've tried restarting in Safe Mode and it still brings me to this point every time. I've also tried using system restore and startup repair through the advanced settings from pressing F8 during boot up.
PS. I did not upgrade my version of windows or anything...Windows did install some updates last time I turned off the computer I think.
View 4 Replies
View Related
Oct 19, 2012
I can boot windows seven but the screen goes black when i select my user icon and the mouse pointer is visable and moves but nothing is there to click. I can get into taskmanager but there is nothing i can do there either. I have lost my instal/upgrade disk. This was an upgrade from vista.
View 1 Replies
View Related
Dec 6, 2012
I bought my acer recovery and system discs and loaded them everything went smooth untill the end put last disc in and it loaded it and then said windows will complete installation after restart then it shut off and restarted the lil wii fii light came on and blue disk light blinks but nothing on screen?
View 1 Replies
View Related
Feb 13, 2013
So this started out as a driver issue - I couldn't seem to install the updated drivers for my ati radeon hd 5 series (I don't have access to my actual specs right now) video card no matter what I tried. Each time it would seemingly revert to the awful on-board graphics and I would have to perform a system restore to correct it. Rinse and repeat. Eventually, I tried one forum poster's recommendation of updating my bios, which managed to bork the computer so bad that it broke the system restore function altogether. So, time to reinstall windows.The computer is a dell xps9100 and didn't come with a windows 7 cd, so I restored to the factory image of windows 7 through the advanced boot menu. It seemed to work, but when it rebooted I got the windows logo and then nothing (black screen, no cursor).
View 5 Replies
View Related
Nov 17, 2012
today I was cleaning around my computer area and well was dusting where my computer sits and I pushed it too far out and it fell and hit the ground. It was on too and the monitor lost signal even though the VGA cord was plugged in...Since I couldn't properly shut it off by going to start etc etc I just held the power button till it shutdown..I thought my video card got loose so I hit the kill switch unplugged it and checked everything,but it was all fine. When I plugged it back in,it turned on and well kinda lagged on start up,more than usual...I figured everything was fine until I shut it down and after it was off like 5 seconds later it turned on by itself?? I checked my motherboard and components for any damage or cracks but couldn't find anything. Now this I do not mind,i'm just afraid that it'll cause damage to my PC or cause my motherboard to fry or something because now in order to keep it off from starting byitself I have to shutdown then quickly hit the kill switch,sometimes I dont do it fast enough and the computer slightly turns on,too fast to stop me from switching it off. Also when I hit the killswitch to off and then switch it back on.the pc refuses to start itself until I push the ON button and shutdown again.
View 4 Replies
View Related
Feb 22, 2012
Running Win 7 Home Premium 64 bit on a Lenovo Ideapad Laptop.Two days ago, I was trying to make my monitor display just a little less contrast, so I opened a utility called Intel HD Graphics that I found on the bottom right toolbar, and it had sliders with which I fixed the problem. But then I noticed a slider called "Hue", and by moving that quickly from side to side, my monitor went from blue to green to pink to yellow and back again, what can I say, I'm easily entertained.Anyway, the computer froze up, and I had to rude boot it. From then on, I would start the computer, and it would look good, like it would start for real, and I would even see some icons on the desktop, but then it would freeze up and I'd have to rude boot it again. It still works in Safe Mode.
View 1 Replies
View Related
Oct 27, 2012
[CODE] - When i press the repair computer it won't work and boots.
View 8 Replies
View Related
Oct 24, 2009
When my new laptop boots up and I click on Internet Explorer, I am not autmatically connected to internet. This is not true of my other laptop and desktop at home.
Is there some setup thing I have to do so I can avoid having to always hit the additional button to connect?
View 1 Replies
View Related
Dec 7, 2012
when I first boot up for the day, I am not able to activate any programs on my desktop by clicking on an icon. sometimes i get the wheelie spinning round but nothing happens, this am i tried to open windows live mail and received an error message. Unfortunatley I cant quote the contents but it did mention that memory could be a problem. anway I rebooted an as usual everything was fine,
View 1 Replies
View Related
Dec 13, 2011
I tried a registry tweak to fix my home networking issues and came up with a major fail. Long story short, I changed the rpcedptmapper value and the system won't boot.I put the HDD in a cradle and it won't get recognized. HP in all their wisdom, sets the recovery disk to obliterate the entire HDD even if you created a separate boot partition
View 5 Replies
View Related
Feb 11, 2012
I was all good working on my computer when I decided to restart my computer because "rocketdock" (a dock program) didn't open a folder and gave me the "open with" dialog instead.
Background:- I've installed a lot of updates recently, including SP1. The windows is customized i.e. some files are edited. I used tune up registry cleaner, which caused a problem in Chrome, so I used a command found on the Internet, it made tons of errors (which was mentioned by the one who suggested the command) and the computer CPU was fully loaded, the command was replacing files, or something like that. When I remember the command I'll post.
PS: "Ctrl+Alt+Delete", "Ctrl+Shift+Esc", and "Ctrl+L" don't do anything. PS2: Safe Mode loads into the same screen.
View 3 Replies
View Related
Jul 17, 2012
Basically I woke up this morning to my computer sitting at a black screen with the cursor visible. I'm able to move the cursor but do nothing else. I rebooted my computer my manually shutting it off and then it started up as it would normally but did this disc check: [URL] from there it moves back to the black screen with the cursor. I again restarted and booted in safe mode this time. I was then able to reach windows and tried to do a system restore to an earlier point. When I did this i was greeted with this error [URL]. Finally here is my harddrive just in case [URL]. I exported my full system info:
OS Name Microsoft Windows 7 Professional
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name *****
System Manufacturer INTEL_
System Model DH67BL__
System Type x64-based PC
Processor Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292 Mhz, 4 Core(s), 4 Logical Processor(s)
BIOS Version/Date Intel Corp. BLH6710H.86A.0076.2010.1115.1959, 15/11/2010
SMBIOS Version 2.6
Windows Directory C:Windows
System Directory C:Windowssystem32
Boot Device DeviceHarddiskVolume1
View 4 Replies
View Related
Jan 21, 2011
Windows boots and starts up, but at some point I get a black screen from which I cannot exit unless I reboot. Since my video card has 512MB, and my board's maximum memory is 4GB, I suspected Windows would not have the full 4GB to play with, and, sure enough, the Windows properties screen shows I have 3584 MB available. Also, the POST screen seems to test 3670016 KB, which I believe is the same thing. In fact, even the memory test programs report only 3584 MB memory. I have been running Win 7 x64 for several months on my Gigabyte GA-K8NSC-939 motherboard using 2GB memory (4x512MB). I decided to upgrade to 4GB (4x1GB), the max the board can handle.
Installed and tested using Memtest-86, Memtest86+, and Memscope with several passes of each -- all good. On the other hand, one of the advanced tests for Win Mem Diagnostic failed, but since it was making lots of artifacts on the screen, I suspected it was confusing video memory with RAM. So I thought Windows knows about my memory and vid card and is reserving things apprpriately, but maybe not. I boot and go into Win 7, and enter my password, but some time later the screen goes dark as if it has gone to sleep, except it will not wake up.
Most of the time just before it goes dark, I see several colors on the screen, which make me think it has something to do with the video, and I wonder if the computer is getting confused about which memory it can use for what purpose. I looked in the BIOS for something obvious, but I didn't find anything, except (maybe?) the setting for "Init Display First" which was set to "PCI slot," and which I changed to "AGP," but I don't think that worked. I looked for but did not find something about memory mapping, so maybe that is on already.
View 18 Replies
View Related
Oct 15, 2012
i was using my HP 2711x last night and it was working wonderfully, and today i turn it on to do some homework and it doesn't show me the login screen, it's just black. and then i try it in safe mode and it works, what could be the problem? and can you explain step by step so i don't miss anything
View 3 Replies
View Related