Error: Recovery.Dat
Oct 30, 2009
I have a ASUS x83v notebook,
duel p8400 64bit 4gigs ram nVidea w/ 1gig ram
running vista.
During the RC trials I downloaded W7 burned it as a bootable iso and installed it from the dvd. It flawlessly installed I went through all the setup stuff, clock language ect. and then it reboots and just as it starts I got a screen with a big red ERROR on it with
"Can not open c:Recovery.dat"
I reinstalled it two more times, same thing.
I redownloaded the RC iso and burned it again then installed it again, same thing.
I figured it was somehting to do with the RC version, until today!
I just bought the W7 Ultamite64 and installed it and it did the same exact thing. I am guessing there has to be some incompatability with my BIOS or something but I don't know a lot about this stuff.
If you know anything please let me know as I can't buy a new computer to run W7.
View 6 Replies
ADVERTISEMENT
Jun 23, 2012
I've gotten to the point where I need to just reinstall windows completely on my Asus G74SX (too many problems, I want to start fresh.). I encounter an error 1029 with Asus's recovery disks that I made when I had windows working: it says it is recovering all the way to 100% then doesnt work. I am in the process of trying it again so I'll see if it actually managed to wipe my hard drive like it said it was doing, and maybe if it did actually work and reinstall windows.However, I'd like to be able to get into the recovery partition because I would prefer restoring it with Asus as they recommend me to. However, when I hit F9, their target to get there, it doesn't do anything and just reloads the boot screen, with the Asus logo on it. I don't have an actual Wndows recovery CD so that's not an option, and at this point since my hard drive has likely been wiped by these recovery DVDs, I don't think going into Ubuntu and fixing the MBR will do me much good anymore.It may be worth noting that before I last restarted, I marked the Windows partition as active because of a tutorial here, making it so that recovery partition isn't active anymore.
View 4 Replies
View Related
Dec 3, 2008
Rafael writes "Today, while in a class, I installed some software in Windows 7. You know, to pass time. A reboot later, I was greeted by a driver-induced bugcheck, making me doubt the whole “Windows Vista applications will work fine on Windows 7” word going around… (but that’s another story)
I already knew what the problem was, so no big deal… I figured I’d just mash F8 a few times and boot up into the Last Known Good Configuration to prevent the culprit driver from loading and be on my way… "
Read on :-
Windows 7 Error Recovery is a punch in the nuts for techies - Within Windows
However Bryant at AeroXperience had a different view of the Recovery process
"got to work today and booted my macbook. Having forgotten that I switched it to boot Windows the night before, I didn’t hold the Option key to boot into Mac OS 10.5 (for work needs. I wouldn’t dare keep it otherwise). I wasn’t paying much attention to what was going on with the screen as I was in the middle of a meeting, but I got back to it after about 5 minutes and came upon the above scene unfolding on my laptop. It was vaguely familiar; Paul Thurrott reminded me later that it’s an offshoot of the Windows Recovery Environment which is now integrated into Windows 7 as opposed to being contained solely on the installation DVD.
The fact that the Windows Recovery Environment (WinRE) would be contained in the Windows 7 installation is nothing new; reviewers covered this after their reviews went live on Windows 7 keynote day at PDC. However, no one has actually seen it work, so here I am.
Yes, it actually works.
In my case, my instance of build 6801 died on an “unknown bugcheck: 12b” which led to WinRE being launched. The recovery mechanism checked for issues, subsequently asked me if I’d like to use system restore to roll back to the last working point, rolled back, and presented me with full details of all of its scans (some of which you’ll see in my quick-n-dirty BlackBerry shots). After all of that, it rebooted and voila, Windows 7!
View 1 Replies
View Related
Apr 4, 2012
I am receiving a windows error recovery each time we power up the compter. The first thing that comes up is windows error recovery. It says to use system repair (recommended) but when we do that it just goes to boot recovery. The other option we get is start windows normally...windows then starts but then freezes and goes right back to windows boot manager. It will not even load up in safe mode anymore.
View 12 Replies
View Related
May 14, 2011
It's a HP Pavillion running Windows 7. When I start it up it goes into Windows Error Recovery, does it's thing then says "Startup Repair canot repair this computer automatically". I've then tried going into the advanced options where I can run a system restore but this fails too. Is there anything else I can do?
View 3 Replies
View Related
Aug 5, 2012
Now I am having trouble on starting Windows. I get the "Windows Error Recovery" screen on startup or restart. And now I also get a blue screen that says something about "dumping files" at the bottom, it goes by so quickly I can't read everything.I've done some reading on the internet and most say that my registry has been compromised and to buy a registery cleaner. Is this correct? I am afraid to do anything, I don't want to lose what is on my harddrvie.I went to system restore and chose a restore point but then was afraid if I did that I would any programs I had installed, like the PC Tools I just installed last night
View 1 Replies
View Related
Jan 27, 2011
Im running in Ubuntu and Made a USB recovery to get my Windows partition back from SFS. I changed the type to NTFS via testdisk. I loaded the recovery software once and tried to do a repair. It restarted and now when I try to boot the USB it brings up the Windows bootloader with a 0xc0000098 error that has to do with boot/BCD.
View 9 Replies
View Related
Oct 30, 2009
I have tried to install Windows 7 Ultimate on to my Asus F7Se but keep getting the above error.
I have deleted my d: partition so now I only have c: and a recovery partition. I have tried to do the upgrade option and the custom one but always get this message when it is trying to boot up.
I have searched everywhere for a fix and found a few posts but none have worked so far.
Do anyone have any pointers so I can get it installed ? If anyone needs more information please let me know.
View 9 Replies
View Related
Feb 20, 2009
I'm getting a very strange installation issue. I was hoping someone could shed some light on my problem.
To start with, I'm using a Windows 7 v7000 installer disk. I'm confident that this installer is good, because I've already set up my gaming machine with it.
Now I want to install Windows 7 on my home theater PC. The components are as follows:
ASUS P5N-EM HDMI
Intel Core 2 Duo 2.66Ghz
Western Digital HD
2 GB of Ram
I am able to install windows Vista on this machine with out a problem.
This is what happens when I attempt to install windows 7:
Everything appears to load off of the DVD drive. I go through "Copying Files," "Expanding Files," "Installing Features," and "installing Updates." Then the machine reboots.
The installer continues to behave as expected, with "setup is updating registry settings." Then it reboots again. This is where the Sh*t hits the fan...
After the reboot, it takes me into a black screen "Windows Error Recovery." If I ask the machine to start up normal, it immediately reboots again, returning to another "Windows Error Recovery" screen. It will repeat this cycle forever.
If I ask it to start in Safe Mode, then I get the following error message: "Windows cannon complete installation in safe mode. To continue installing windows restart the computer."
I'm at a loss. I even downloaded build 7022, and the problem still persists.
View 3 Replies
View Related
Oct 5, 2011
I did the stuff that is listed below, but first, my issue and a yes or no question: If I boot windows, without the Linux CD in, it shows me the "Windows Error Recovery" if I hit start windows normally, it starts loading the windows 7 screen, half way through the Windows Logo, it freezes, then brings me back to the windows error recovery, so I tried "Launch startup repair" it then brought me to a "Windows boot manager" and says 1. Insert your windows installation disc and restart, 2 choose your language settings and then click "next" 3 click repair computer.
View 5 Replies
View Related
Jul 29, 2012
I can not get past the System Recovery Error Message screen. I have tried F8 and then safe mode, restore to an earlier point, repair and all to no avail????
View 8 Replies
View Related
Oct 20, 2012
My friend installed Windows 7 (from internet) on my Compaq C700 (which had Windows Vista 32) I don't know if he used windows 7 32 or 64... Now I'm receiving an error message :0xc00000e9 Since I don't have the recovery/repair CD I will buy one but before doing it I want to know if I have to buy the recovery/repair CD for Windows 7 or Vista?
I tried to repair it using F11-F10-F8 but it didn't work.
View 2 Replies
View Related
Sep 17, 2012
I have been experiencing a problem that has occurred out of nowhere on my HP TouchSmart Tx2-1377nr laptop. I'll go step by step on what happens when I turn it on:1.Standard Boot Screen occurs.2."Windows Error Recovery" Screen. On this screen I have two options, launch startup repair or start windows normally.2a. If I start the startup repair it shows a loading files screen then I am met with the backround of my login screen. No user accounts are shown and all I can control from this screen is my cursor. After a couple seconds, a command prompt window flashes and disappears and from there on I'm stuck on this screen till I unplug the battery or emergency shut off.2b. If I start windows normally the 4 color loading animation starts. Then the computer just bluescreens, and restarts and I'm sent back to step 1.I've tried a lot of things. I've started it in safe mode, done every option off F8, done a lot with my BIOS, and tried reinstalling windows off the windows installation disk. When I try to install windows off the disk, it holds me on the setting up installation screen with the same backround as step 2a.
View 1 Replies
View Related
Jan 4, 2013
So it all started when I was playing swtor. I walked away from my computer to have a smoke. When I got back swtor had closed. I tried launching it again with no success. I used the fixlauncher.exe, again with no success. My computer then bsod's and restarts to windows error recovery. Attempted to launch startup repair, it restarts. Try to start windows normally,get a glint of hope from windows loading then got bsod flash then restarts. I've tried to start in safe mode, last good config, etc. no matter what I tried it didnt start. So I put th hdd in a different pc put a fresh windows 7 on it and still the same problem.
Psu:cooler master gx-750w rs-750-acaa
Cpu: amd athlon II 651k
Ram: corsair vengeance 2x8gb 240 pin 1600mhz
Vid card: nvidia geforce 550ti 2gb
Mobo:asus f1a75-m
View 4 Replies
View Related
Jan 5, 2013
my computer keeps saying windows error recovery.
View 2 Replies
View Related
Aug 17, 2011
When I use the backup utility in the control panel, and try to restore an image, at the point where I hit restart, I get the message - windows cannot restart into recovery environment.
Has anyone ever seen this message (it's the first time I've seen it).
View 9 Replies
View Related
May 2, 2011
Windows Recovery Error after installing H50 cooler.
View 7 Replies
View Related
Apr 27, 2012
Ordered recovery cds from acer. Had to delete 100 mb partition to make it work. Said recovery successful except when computer re-booted. Error msg came up: "An error occured while attempting to read the boot configuration data."File BootBCD Status: Oxc0000225.It also said to fix problem insert my windows install disk.Choose your language settings and click next.Click "Repair your computer".I dont have windows install disks. There are none on internet to download. I thought system recovery installed all this. Can someone help to get this booted up and running.
View 1 Replies
View Related
Nov 19, 2012
So I have a machine on my hands that is suffering registry damage due to viruses that I managed to remove but I still can't get the registry repaired since the computer has no recovery partition and the original cd is gone. System restore did nothing so I'm wondering if there is a way to fix the registry with what those things missing.
View 5 Replies
View Related
May 31, 2011
My son downloaded Windows 7 Recovery (virus) this weekend. I have Windows 7. I searched for the solution and it was suggested in a forum Grindsoft Trojan Killer.I downloaded that and it worked. It showed the hidden documents, programs and photos etc. I then ran Windows restore for a date much before the virus and that restored a almost normal computer. It seems I can do everything...have not checked everything but so far everything looks good but I am unable to do a Windows update.I get an error code 80070005. It acts like it is unable to access Microsoft. I have gone to the control panel-trouble shooter-windows update and it said it repaired it but still the same problem. I have done many scans with Malwarebytes, Online Norton and more of the Grindsoft Trojan Killer and everything comes up clean. I seems that I am hopefully down to this windows update problem
View 13 Replies
View Related
Aug 3, 2012
I ran VAIO Recovery Wizard in VAIO Rescue Tool(s) and it shows an error with error code 320.In here it says:320(When using the Recovery discs)Recovery Discs and Optical Drive(Try using F10)320(When using F10)RAM and/or HDD(See the important notes above)I ran the diagnosing program in VAIO and it tells me there's an error in the HDD. Now I'm running a further diagnosis but now what can I do?
View 1 Replies
View Related
Dec 23, 2011
My mothers Dell running Windows 7 has a problem where, soon after powerup, the screen goes to a Windows Error Recovery screen featuring two options, either A) Launch Startup Repair, or B) Start Windows Normally. If A is chosen, then it goes to a screen which says, Loading files at the bottom with a loading bar, then when the bar is full, the screen returns right back to the Windows Error Recovery screen. The same with starting normally.
View 1 Replies
View Related
Nov 28, 2012
i am using factory installed Windows 7 over hp laptop its working perfectly even recovery from f11 and hp recovery manager system recovery option also working means easily to restore i was create recovery usb from recovery manager when i try to boot usb for recovery after loading start error show Unmountable Boot Volume blue screen appears
View 1 Replies
View Related
Sep 1, 2012
My laptop has been experiencing the disk read error on startup. I called Sony (I have a Sony VAIO Laptop VPCF130FD) and they put me through all these steps including trying to boot up the recovery partition of the drive. Through the steps taken, they think that the OS is corrupt as the computer had been freezing before.The only step that has taken effect is the reset default values of the BIOS. When the recovery partition is selected it hangs between the "Starting Windows" screen and the first recovery screen.Sony wanted me to pay $60 for discs to be sent to my house, but I am building a gaming desktop PC so I thought I would just buy the OEM System Builder Win 7 Home Prem x64 and use that disc to install as I have the product key my laptop uses.So I bought the disc today and booted my laptop off of it but like the recovery partition, it sits between the Start Windows screen and the first install screen.
View 9 Replies
View Related
Jan 21, 2012
I am on Windows 7 x64. Today I turned my computer on and it stopped at the "Windows Error Recovery". From the 2 options given I chose "Start Windows Normally". After pressing Enter it will not go beyond the black screen where it says "Starting Windows" and immediately reboots to the "Windows Error Recovery" again. I then chose the other option which is "Launch Startup Repair", entered the Disk, wait for it to load system files but it reboots to the Disk loading the files again like an eternal loop. Tried the F8 Advance booting options, chose "boot in safe mode with command prompt", it starts loading but then it reboots itself again!!
My system specs are these:
>XFX Nforce 750i SLI
>Intel Core 2 Quad Q9400 @ 2666 MHz
>3x2gb Corsair CM2X2048-6400C5 DIMM DDR2 PC2-6400U DDR2-800 (5-5-5-18 3-22-6-3)
>ATI Radeon HD 4300/4500 Series
>WD Caviar Blue 500gb
View 4 Replies
View Related
May 17, 2012
I had two hdd's in my computer and decided to remove one as I did not really need it and figured it save some power, after removing secondary hard drive which was just being used as storage i received the " MBR Error 1" after about 2 hours researching, I found I could repair it from windows cd, only problem is I only have a live usb version of it and when I try to launch system recovery the operating system is not listed and I have to load drivers for the hard disk. I really do not want to wipe and reinstall windows as its only been 2 weeks since i built the system and also I have a game which is 25gb digital download installed on it but it deletes the installation files after installing it and reinstalling would mean re-installing.
I guess I have 2 questions:
1. Is there anyway to copy a liveusb onto a disk ? for example, make an iso of a usb drive and burn it to dvd?
2. What drivers would I have to load on the windows startup recovery to get it to see the operating system
Below are my system specifications:
MOBO: Asus sabertooth z77
RAM: gskill ripjaws 8gb (2 x 4gb)
CPU: Intel i5-2500k
GRAPHICS: Zotac geforce gtc 580 3gb
HDD: WD caviar blue 500gb
OS: Windows 7 ultimate SP1 64 bit
View 2 Replies
View Related
Nov 19, 2011
I'm writing about my brother's Samsung R780 laptop (running Windows 7 64 bit), which recently stopped working. When he starts the computer, he gets the following error: "Windows Error Recovery." Searching around online led us to create a system repair disk on my laptop (which also runs Windows 7). When we boot with the disk in the drive, a prompt asking for our language (which is greyed out so we can't change it) and our keyboard (which we can change) appears. Without changing the keyboard option, we press 'next' and then it freezes. We've also tried the 'repair your computer' option in the Advanced Boot Options, but it also freezes.
View 1 Replies
View Related
Nov 24, 2012
I have this laptop with Windows 7 as the operating system and with a capacity of 500 GB. My HDD was making loud noises and weird noises so I brought it to the shop and they told me to change the HDD because it might die anytime. So I did a full backup on my external hard disk, meaning that I cloned my laptop. I changed my 500gb HDD with a 240gb SSD. And when I tried to restore my backup files into the new drive, there's an error: "no disk that can be used for recovering the system disk can be found".
So I did some research on the internet and found out the reason of the error: it's because the image created was from a bigger drive than the new drive I put into my laptop. Even though my backup files are only about 100gb, I still cant restore it to my 240gb SSD because the image created was from my 500gb HDD. I am going to copy my backup files into an external hardisk with a capacity of 200gb and then backup from that drive and then I will restore it into my 240gb SSD. Will the backup file be considered as a backup from the 200gb drive or from the original 500gb HDD?
View 8 Replies
View Related
Oct 27, 2012
I have a dell desktop computer with windows 7. As soon as you turn it on it goes straight to the "windows error recovery" screen where it has the option to either start system recovery or start windows normally. If I choose system recovery, it just gets stuck on a screen that looks similar to the backround of the loggin screen, but it's just the backround and my mouse. It will stay on this screen for hours until I turn it off. If I start windows normally, it will have the regular "starting windows" screen then it will flash back to the "windows error recovery" screen. If I try booting into safe mode, or loading the last good configuration, it will always bring me back to "windows error recovery". I have the 2 recovery disks I made when the computer was first bought, but when those are inserted, nothing happens and I'm not sure how to open them, it just always ends up at the "windows error recovery" screen. This computer is only about a year old and I have no idea what to do. I just need it to start up again.
View 1 Replies
View Related
Apr 29, 2012
I'm weeks of spasmodic attempts into replacing my old C-drive with a new SSD and a clean install of Windows 7, 32 bit. Here's the current loop: Following Sandisk's instructions on formatting SSD for use as OS with Win 7:
1) I verify BIOS - SATA is (as before) set to ACHI
2) I place Windows 7 upgrade disc in drive, hoping to use "Option 1 - normal clean install" (from Clean Install with a Upgrade Windows 7 Version )
3) I get "Windows Error Recovery" screen, stating "windows did not shut down normally" (white text on black screen), with two options - start normally, or startup repair.
- if I select "start normally," it merely returns (after a minute or two) to the same Error Recovery screen after some POSTs (nothing other than single-beep) - no request for my input, no "press any key," etc.
- if I select default ("startup repair") option load: "Windows cannot repair this computer automatically" ultimately results after a lot of attempting to repair, etc.
PC will still run Ok from old HD when connected, and shows the SSD in Disk Management with a "System Reserved" 100 MB (F) partition along with a 112GB (E) partition. I keep thinking I need to wipe those and try again, but not sure how or if that's even worth trying. I did have the same SSD up and running Win 7 for a brief time - didn't start at some point afterwards...
View 9 Replies
View Related
Oct 17, 2012
My toshiba satellite wont start. goes straight to blank screen with flashing mouse no cursor. on blank screen no error messages wont start from recovery disk
View 7 Replies
View Related
