Can't Copy / Backup To External Drives
Dec 9, 2011
I have Asus N55SF laptop, with Windows 7 SP1 64 bit. Also, I have 2 external hard drives. One with USB 3.0, and one USB 2.0. Following problems, I am going to describe below, happen to the both of them. Just to mention, external drives are tested on desktop computer and following problems do not happen.Let me now describe what happens when I try certain actions:
- When I try to copy large files (10 or more GB) I get an error that destination is no longer visible. External drives disappear from My Computer and I can't do safe remove. But when I copy files using programs FastCopy or TeraCopy everything copies well and drives do not disappear.
- When I try to do Windows Backup and encrypt them using BitLocker drives also disappear, and are not visible within OS.
- There is a difference between external hard with USB 3.0 port and the one with 2.0 port:
1-when one with 3.0 disappears after described actions I can't see it from Device Manager, I can see it only after windows reboot. USB 3.0 disk connects to one USB 3.0 port on laptop.
2-when one with 2.0 port disappears I can see it from Device Manager, and I only have to unplug it, and plug it in again to see it. USB 2.0 disk connects to 2 USB 2.0 ports on laptop.
Common to both disks is that when then disappear from My computer the diode on the external disk cases are still flashing, what probably means that they have some power. Both disk are formated to NTFS, and Allocation unit size is set to: Default. Their removal policy is set to: Better performance (default). On laptop I only have Windows, Office and Asus drivers. Antivirus is: MSE.
View 5 Replies
ADVERTISEMENT
Dec 9, 2011
I have Asus N55SF laptop, with Windows 7 SP1 64 bit. Also, I have 2 external hard drives. One with USB 3.0, and one USB 2.0. Following problems, I am going to describe below, happen to the both of them. Just to mention, external drives are tested on desktop computer and following problems do not happen.
Let me now describe what happens when I try certain actions:
- When I try to copy large files (10 or more GB) I get an error that destination is no longer visible. External drives disappear from My Computer and I can't do safe remove. But when I copy files using programs FastCopy or TeraCopy everything copies well and drives do not disappear.
- When I try to do Windows Backup and encrypt them using BitLocker drives also disappear, and are not visible within OS.
There is a difference between external hard with USB 3.0 port and the one with 2.0 port:
- When one with 3.0 disappears after described actions I can't see it from Device Manager, I can see it only after windows reboot. USB 3.0 disk connects to one USB 3.0 port on laptop.
- When one with 2.0 port disappears I can see it from Device Manager, and I only have to unplug it, and plug it in again to see it. USB 2.0 disk connects to 2 USB 2.0 ports on laptop.
Common to both disks is that when then disappear from My computer the diode on the external disk cases are still flashing, what probably means that they have some power. Both disk are formated to NTFS, and Allocation unit size is set to: Default. Their removal policy is set to: Better performance (default). On laptop I only have Windows, Office and Asus drivers. Antivirus is: MSE.
View 9 Replies
View Related
Jan 20, 2013
I can copy any files (from and to) in any external devices.... wen i tried it says disk write protected
View 4 Replies
View Related
May 11, 2012
how can i make a backup/ system image for my internal and external hard drives at the same time?
View 4 Replies
View Related
Jun 29, 2012
can u backup your data (or an system image)to an internal and external hard drives at the same time?
View 1 Replies
View Related
Jul 21, 2011
I just finished putting together my computer, installed Windows 7 Pro 64 bits. However, both of my hard drives (one SSD, one regular HDD) are showing up as external drives (plug-and-play). If I click the "Safely Remove Hardware" icon, I could actually "eject" both of my hard drives.
View 5 Replies
View Related
May 25, 2012
I'm running Windows 7 64x Home Premium on a Toshiba Qosmio X505 laptop. I just got it back from the warranty repair center, where they replaced the hard drive and graphics fan & heatsink, and reloaded the factory windows version. Before I sent it out for repair, I used Windows Backup to create a backup of all my files on a Toshiba casio 500GB external USB drive (I had over 300 GB of files, so it was easier to use Windows Backup than drag and drop all the files, at least at the time). Now that I have the laptop back, I'm having trouble restoring my files. When I go to Control Panel-> Backup & Restore, a message appears in the restore section, saying "Windows could not find a backup for this computer." I've tried reconnecting the drive as well as restarting my computer, but to no avail. I can see and explore the files in My Computer, so I know the hard drive is properly connected.
View 7 Replies
View Related
Oct 21, 2011
I'm trying to backup Windows 7 to an external HD that currently is used to backup mac.eed to do to make this happen? I'm sure I'll have to format the ext HD then backup the mac using a different file format, but am unsure just what I'll have to do or how to do it.
View 4 Replies
View Related
Jan 1, 2013
My computer will start out copying to a usb flash drive at 80+ MB/s, and progressively slow down until less than 5MB/s. Then at the end of the file copy, it will stall out for a while and finally close the save window. The drive is rated at 30+MB/s and certified usb 2.0. The port is also usb 2.0. What can cause the usb bus to slow down and act this way? Trying to copy files that are greater than 4GB onto NTFS filesystem.
View 1 Replies
View Related
Jul 21, 2012
I have already made my "Outer Volume" on my back up HDD with Truecrypt & now using Second Copy to copy my main media HDD to my backup HDD. Once I copy the data & am then going to create the "hidden volume" option Truecrypt offers. How will this sync up with Second copy? If it makes a difference in syncing second copy I would also like to set up the main media HDD the same way with the Outer volume & hidden volume options. So keeping it a perfect encrypted sync if possible.
View 3 Replies
View Related
Sep 26, 2011
I want to do a 100% backup of the C: drive on my PC. Since Tom's Forums still doesn't have a forum search (although I'm sure it did before Tom sold out) I'll ask in innocence.Supposedly XCOPY has been bonged in Win 7 and replaced by ROBOCOPY. If I copy ROBOCOPY to another drive, will I be able to do a 100% backup of my C: drive to an external USB 1.5TB HDD? Is there there something better that might just compress and backup?
View 6 Replies
View Related
Sep 17, 2011
Have a a Win 7x64 Pro system with 24GB memory Intel DX58SO2 CPU. The driveconfigurations are:C: 80GB SSD (Intel) which contains the OSD: Programs)/E: Data) WD 1TF: (Misc) WD 1TAttempt to backup to the F: drive, above, as well as an external 1T drive connected via USB2 to the computer.Have tried the Windows 7x64 backup package, NovaStor, Acronis and one other backup package. All four of the backup programs NEVER run to completion - they simply quit the backup process. So for almost a year I have been unable to do a proper backup!When the backup stops/quits I have noticed that the drive letters of the disk drives I was backing up (a single file or multiple files from the drive) disappear and the drives are no longer accessible. To restore the drive letters I simply reboot the system and all is as it should be.
View 1 Replies
View Related
May 30, 2011
am trying to do a backup of my Win 7 system drive (C, but the backup utility is saying that it must backup by non-system drives (E: and H, which happen to have "System Volume Information" folders on them. They are not system drives. E: is my main utilities drive and H: is my games drive.Somehow, Windows thinks they are system drives, when in reality they aren't.Any ideas on how to change them? When I go in to Disk Management, they are not showing as system drives. They are all partitions on the same hard drive, but there are other partitions not included in the backup.
View 3 Replies
View Related
Jan 22, 2013
It seems that the copy and replace only checks names, but I would want the older files to be replaced by the newer ones, and to be ignored if they have the same names and dates. ouadad has chosen the best answer to his/her question.Click here to view the answer that was selected.
View 1 Replies
View Related
May 27, 2012
I'd like to just do a clean install of Windows 7 Pro on a new drive for the same computer and use the previous drive for storage. But want to make sure everything goes well first. Oh and it's the windows 7 pro OEM system builder pack version.
View 4 Replies
View Related
Nov 28, 2012
one week ago i purchased HP-1000 series laptop which came with pre installed windows 7 but my hard drive failed and a new hard drive is given to me but i dont have the cd of windows 7 or the backup please suggest how to install a valid copy of windows 7 using product key
View 3 Replies
View Related
Dec 13, 2011
I have a new computer build where I have Win 7 Pro 64-bit installed on a SSD. Then I have a pair of 1TB drives that I setup as mirroring drives in Disc Management.I proceeded to setup my windows backup to the mirrored drive, but it is giving me the warning: When restoring a system image from this volume, the disks on your computer cannot be formatted to match the layout of the disks in the backup. To have full restore functionality, select a volume on basic disk as our backup location.it is a small 64GB drive strictly for the OS and surfing the net... minor games (wife card games, etc.)... and a few other minor things. I mirrored the 1TB drives because they are going to be our music server on our network for our laptops... as well as we planned to backup our laptops to the 1TB drive? I figured I would mirror the 1TB in case one crashed we would have the backup. A backup of the backup, so to speak. However, if I am having issues with not being able to setup windows backup on these from this computer, I assume I will run into the same issues with the laptop backups.Is there no way to use windows backup to a mirrored drive?
View 3 Replies
View Related
Aug 15, 2011
My laptop is not letting me copy anything onto USB flash drives. I'm using windows 7. I have already tried system restore and uninstalling the drive in Device Manager and Disabling write protection in the registry but to no avail. I am able to format the pen drive and also access files on it and copy files from it. But I am not able to paste files from my laptop onto the pen drive. It says "Destination folder access denied" and "You need permission to perform this action". I am running an administrator account. Also I am able to do everything normally in the case of a external HDD but again face the problem when trying to paste something to SD cards. I have taken ownership, run as administrator and also tried to drag-drop but to no avail. This not for just 1 particular file/folder. I am not able to copy anything to the USB and at the same time I am able to copy anything to the external HDD.
View 4 Replies
View Related
Feb 1, 2011
I know this is a simple question, but how do I make a backup copy of a new program disk in Windows 7... which I am allowed to do (according to the terms and agreement)? I want to do this so I have a backup in case the original disk fails.
View 12 Replies
View Related
Mar 24, 2012
I have tried a few backup programs but I'm trying to find out the best way of copying around 500gb of files and keeping all the dates, attributes and security permissions intact?
View 3 Replies
View Related
May 26, 2012
I am making regular backups - both the image backup and the file sets using Windows 7 Backup program. No problems with that.
But, I periodically would like to copy the image backup to a portable drive. I plan to take this portable drive offsite to a secure location - I call it my archive.
Is this possible? What files must I copy? Do I have to maintain a certain directory structure or naming convention in case I have to use the archived copy to restore (assume a bare metal restoration)?
I thought I could just copy the VHD files (boot and system) but the image backup has other directories and files and I just don't understand their purpose.
I need to copy these files rather than running the backup over again to this portable archive device. I have multiple computers and it is impractical for me to physically access each computer to re-run an image backup to the same archive device.
My archive device is a regular USB/eSata HDD and I don't plan to put VSS on it.
View 4 Replies
View Related
Dec 8, 2009
I got this really strange problem going on with my win 7 x64 Ultimate
when i wanna copy a iso image thats pretty large (3gigs+) my pc wont let me copy it
even though i have like double the file size that i wanna copy
hyperlink to screenshot
http://i628.photobucket.com/albums/u...g?t=1260273548
anybody else got this problem? anybody able to fix this? seems like a bug to me, not sure though. I also sometimes get the message "you DESTINATION file is too big for the file you are copying!" any solutions also?
View 9 Replies
View Related
Oct 6, 2011
This problem just popped up on both my win 7 machines. Powered usb external drives (the ones that are based on standard hard drives and plug into the wall) are recognized, but the smaller usb powered ones are not. The drives work on the same computers when booted xp so it's not the usb itself.
View 2 Replies
View Related
Jul 10, 2012
I can only run one at a time instead of two. I would like to copy my 1.5tb over to my 2tb so I have a back up.
My laptop only holds 200GB of remaining data so I can't use that hard drive or I would.
View 7 Replies
View Related
Oct 11, 2009
has anyone else noticed their external usb drives spinning down more often with windows 7? power management setting is set to high performance and to never turn off hard drives. i didnt see this issue under vista. having to wait those few seconds for the drive to spin back up when i access the drive frustrates me!!
View 3 Replies
View Related
Jan 17, 2009
i have two external hardrives, well a laptop hardrive and a desktop hardrive in enclosures, and they were working fine with windows 7, but then i installed a virtual disc program virtual clone drive and now they won't show up at all.
anyone else have a similar problem or know what may have happened, i already uninstalled the virtual clone disc program but it still won't load.
View 2 Replies
View Related
Nov 4, 2011
I am not able to make backup, I get message not enough free space for shadow copy? How do I resolve this? I understand some kind of USN journal is created on System reserved partion. This hidden partition was created when I installed and now I have only 38Mb free out of 100Mb. As I understand this has been an Issue for more than a year, and still Microsoft has not resolved?
View 4 Replies
View Related
Oct 28, 2009
Why does windows put two drives in the "Include a system image of drives" option ?
I only want to backup C:
What is causing this?
My F: disk is only storage no system files as i know of.
View 9 Replies
View Related
Aug 31, 2011
As a complete newcomer to Win 7 I've just copied my Favorites from my XP system onto an external hard drive. I can now see the hard drive in Win 7 but I can't see how to copy the files to Favorites.
View 8 Replies
View Related
Jul 10, 2011
how to copy files to an external hard drive( photos and music0 there dosent seem to be a "copy to " option on windows 7
View 3 Replies
View Related
Aug 23, 2011
I have windows 7 OS from last few days I am unable to copy,paste & delete data from any external drive.I have updated Antivirus I have scanned my PC but atlast result is same.
View 1 Replies
View Related
