has anyone else noticed their external usb drives spinning down more often with windows 7? power management setting is set to high performance and to never turn off hard drives. i didnt see this issue under vista. having to wait those few seconds for the drive to spin back up when i access the drive frustrates me!!
View 3 RepliesI have got an HTPC/Server that has a lot of hard drives in it. The OS is run off a SSD and of all the hard drives, the one that really gets used is 1.5TB WD drive for recording of the television.
I have set Windows up so it turns off hard disks off after 20 minutes if they are not being used which is fine, but my problem is that my computer automatically goes into Sleep Mode (S3 hybrid sleep) when it is not recording anything and when it wakes up all the hard drives spin back up.
Is there any way to keep hard drives spun down even when resuming from sleep?
I just finished putting together my computer, installed Windows 7 Pro 64 bits. However, both of my hard drives (one SSD, one regular HDD) are showing up as external drives (plug-and-play). If I click the "Safely Remove Hardware" icon, I could actually "eject" both of my hard drives.
View 5 Replies View RelatedThis problem just popped up on both my win 7 machines. Powered usb external drives (the ones that are based on standard hard drives and plug into the wall) are recognized, but the smaller usb powered ones are not. The drives work on the same computers when booted xp so it's not the usb itself.
View 2 Replies View RelatedI can only run one at a time instead of two. I would like to copy my 1.5tb over to my 2tb so I have a back up.
My laptop only holds 200GB of remaining data so I can't use that hard drive or I would.
i have two external hardrives, well a laptop hardrive and a desktop hardrive in enclosures, and they were working fine with windows 7, but then i installed a virtual disc program virtual clone drive and now they won't show up at all.
anyone else have a similar problem or know what may have happened, i already uninstalled the virtual clone disc program but it still won't load.
Is there a way that I can search and index external drives and USB flash drives from the Start button search?
View 2 Replies View RelatedI have used "search" in microsoft before there was windows. From that time to 95, 98, xp, vista, but Windows 7 has me baffled. My Desktop pc died and I was well backed up but now I need to find some stuff in one of the drives. Windows support is useless. Give it more than one word and it is lost most of the time. When desktop comes up I am limited to all programs on the c drive of where to search. When I go to computer and select an external drive of course the search option disappears. I detest the standard layout as it is so different from all the other systems which were easy to use.
View 3 Replies View RelatedI have Asus N55SF laptop, with Windows 7 SP1 64 bit. Also, I have 2 external hard drives. One with USB 3.0, and one USB 2.0. Following problems, I am going to describe below, happen to the both of them. Just to mention, external drives are tested on desktop computer and following problems do not happen.Let me now describe what happens when I try certain actions:
- When I try to copy large files (10 or more GB) I get an error that destination is no longer visible. External drives disappear from My Computer and I can't do safe remove. But when I copy files using programs FastCopy or TeraCopy everything copies well and drives do not disappear.
- When I try to do Windows Backup and encrypt them using BitLocker drives also disappear, and are not visible within OS.
- There is a difference between external hard with USB 3.0 port and the one with 2.0 port:
1-when one with 3.0 disappears after described actions I can't see it from Device Manager, I can see it only after windows reboot. USB 3.0 disk connects to one USB 3.0 port on laptop.
2-when one with 2.0 port disappears I can see it from Device Manager, and I only have to unplug it, and plug it in again to see it. USB 2.0 disk connects to 2 USB 2.0 ports on laptop.
Common to both disks is that when then disappear from My computer the diode on the external disk cases are still flashing, what probably means that they have some power. Both disk are formated to NTFS, and Allocation unit size is set to: Default. Their removal policy is set to: Better performance (default). On laptop I only have Windows, Office and Asus drivers. Antivirus is: MSE.
I am currently running Ubuntu 11.04 on my HP (DV5 1110em) laptop from an external USB 2 Buffalo ministation hard drive, I have noticed my machine is equipped with an E-SATA port. Would using an e-sata external hard drive be any faster that the usb option ?.
View 3 Replies View RelatedI've done a bit of research but I'm not sure if these drives actually are less reliable than equivalent 3.5" ones. I have tended to use these for back-ups and have had a few problems with a Toshiba and a Freecom Toughdrive. Is it perhaps down to the fact that most of these drives do not require a separate power supply but are powered solely by the USB connector and perhaps are more prone to electrical connection issues. I used to have a USB ethernet connector before I upgraded my system and this had problems showing in the event log which was cured by cleaning the connector with electrical contact cleaner. Perhaps it is simply the USB connectors.
View 7 Replies View RelatedSo today is my first day with 7 and overall I love it... but I have run into a strange problem with my video library. I have many videos organized by folders on two separate (but identical, both Lacie 1TB) drives that I would like to add to my video library. I can add one drive without trouble. When I try to add folders from the second drive from within media center, the program seems to be adding it but says 0 videos found and when i check back, the folders are no longer listed under the library (essentially the same thing happens from wmp.)
It doesn't matter which drive I try - as long as I delete the libraries first and only plug one drive in, either will add its folders to the video library individually. It's when I try adding the second drive that I can't add its folders. I can always access videos through explorer and view them just fine - strictly a library problem. I can also add the folders from the 2nd new drive to any other library without problem (there are no folders in either that I included in any other libraries - it's only a problem when there are folders in the same library on the first drive.)
When I try right clicking on folders in explorer from the 2nd drive (after adding the first) and try to 'include in library,' it starts to work and then says "The folder could not be included in Videos." I've tried changing the names of the drives and the drive letters, swapping cables and USB ports and nothing works.
My HP netbook will not recognize my verbatium external hard drive, which is about 2 years old and which it recognized last week. Help. Do I need a driver for it? If so, where can I find one?
View 2 Replies View RelatedHow do I get my external drives to show up in my computer as a letter and not in the printer and devices.... Some of my external drives works fine. Everything was working fine 3 months ago. Everything works fine on my laptop...
View 1 Replies View Relatedmy catalyst control centre has stopped working and l can't open my external hard drives.as it says they are empty and also my pictures.could someone please tell me how l can get the catalysr control centre to work again after it made my computer crash as well
View 2 Replies View RelatedAfter searching this forum and googling everything I could think of, I still can not find a solution.
I have a Compaq Presario V2000 (Yeah I know, probably not the best machine for Windows 7) and any type of USB drive I put into a USB port will not show up in My Computer but it does show up in Device Manager and Disk Management. However, my iPhone will connect just fine.
I have checked all the drivers and they are up to date. I went to the Western Digital (my non accessible External Hard Drive) site and there were no new drivers for the drive. I un installed all of the USB Root Hubs and then re installed them. I have basically tried everything thing that I found after googling.
Does Windows 7 have a limit on how many USB external hard drives it will use? We have 5 WD My Book 1TB drives; 4 of them are recognized and work just fine with Windows 7 Home Premium 64 (which we recently did a clean install of to replace Vista Home Premium 64), but the 5th one doesn't show up with a drive letter (in Computer or Windows Explorer), even though it does show up in Control Panel.
The one we are having trouble with has had the latest firmware and WD SmartWare installed, and our computer has the most current Dell BIOS installed. We know the drive works, because we can plug it into our other computer which has Windows XP on it and it comes up with a drive letter just fine. Just wondering if there's a limit on how many of these you can use with Windows 7, since we had no problem with the drive until we installed the new OS.
I bought a 2TB external hard drive (Western Digital) earlier this year on sale and for Christmas I got another one for redundancy (a back-up in case the one I have fails). My problem is that while my computer (a Dell Desktop purchased last year) will get a bit glitchy in picking up one (sometimes it won't recognize it but this is seldom), it will never recognize both at the same time. As a result, I have to add files (pictures, music, etc) to my external hard drives one at a time. I've checked all the USB ports with other hardware, and they all work - the only thing I can think of is that this is a Windows issue. I have both external hard drives assigned to different drive paths, so it's not a matter of that.
View 4 Replies View RelatedI can copy any files (from and to) in any external devices.... wen i tried it says disk write protected
View 4 Replies View Relatedi've got 2 extra 1TB Seagate drive:[URL]I use these to make backups of my 3 hard drives (1 x SSD, 1 hybrid, and 1 SATA). I brought this new machine back in April, and it was working fine up until then. However, after trying to install some software (which didn't wanna install in the end anyway, due to it being rubbish!), I can now no longer see these drives on my PC The weird part too - is that my Win7 laptop has exactly the same issue ... but my brothers Vista laptop, and Win7 PC see them just fine!To start with I was thinking the drive had gone faulty (as it wasn't working on both my machines), but after testing it on my brothers stuff it prooved they are both working fine The USB's I'm using to connect it to are fine (They work for USB sticks and other USB kit) ... so I'm at a bit of a loss as to what it could be? The even weirder thing - is that my brothers 500gb external drive (can't remember what make that was, but its not Seagate) works just fine!Its driving me up the wall as I can't do my daily backups (I'm a software developer, so having a current backup of my PC incase of a fatal mess up with my system is vital for me)
View 5 Replies View RelatedWhenever I plug in one of my external USB drives, Windows automatically pops up a window asking me if I want to scan it for errors. Where do I change settings so that it does not automatically do this every time.
View 3 Replies View RelatedI've a dual boot configuration, XP Professional and Windows 7, where the 2 partitions/OS's are independent by use of a third-party (non-Windows) boot manager. My problem is that any external hard drive I use while booted into my Win 7 OS becomes write protected within a few minutes of installation; however, the same drive is fully usable--i.e., not write protected--if used while booted into my XP Pro OS.
I'm slowly losing my mind. I've checked the registry entry involving "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies" and it's as it should be. I've used the command prompt to check volume/disk attributes for the external drives and all of them are readonly clear. Literally, running Windows 7, within minutes of plugging in an otherwise not write protected USB external hard drive it becomes write protected. Every time.
If I restore 7 with an external attached, will it restore files that were changed on the drive?
View 2 Replies View RelatedMy desktop does not detect and external hard drive that do not come with their own power supply. I have many externals that also plug into the wall and they are working fine; but whenever it is an external without a plug, i.e. the portable ones they are never found.
They do not show up in Computer Management, so it is not because I did not assign a letter to the drive.
I have tried various things, but I don't know what I should be testing for or looking for. These externals all work on other laptops and other desktops perfectly fine so it is not the externals. When they are plugged into my desktop, they light up normally like they should, but the desktop never detects them. I have tried these externals with the different USB cable I have on hand, but nothing seems to work. It doesn't matter which USB port I plug the device in, it still gives me no response.
I am running a i7 860 on a ASUS P7P55D Pro.
I currently have 4 external hard drives connected to my computer. I have each of them set to sleep after an hour of inactivity. However, if I am using the computer, they stay asleep, until I delete something; anything. Any time I send something to the recycle bin, all four of my external hard drives wake up.
I would like for this not to happen. I already went to the Recycle Bin Properties and set each external hard drive to "Don't move files to the recycle bin. Remove files immediately when deleted" thinking that it would quit checking them for deleted files.
how to prevent these external hard drives from turning on when I delete files off of my computer. And just to be clear, I am NOT deleting files that are on the externals, they are files that are on the Computer.
I recently noticed an issue when trying to connect to external hard drives. Initially noted that it wasn't showing in 'my computer' and so assumed I had driver issues and sought to update them from Dell's site. After doing so there was still no change, but noted that It was appearing in 'device manager'.I even tried updating the USB hubs from the Device Manager, and it states that they are all up-to-date with the correct drivers. Both external hard drives that i have tried has worked on other PC's so i assume that mine is the issue.
View 1 Replies View RelatedI'm having an issue with trying to mount shares on my network to a WD Live player. Everything worked fine before reinstalling the OS on my computer. I am using Windows 7 Ultimate on a Dell XPS box. I have 2 external MY book 1TB drives with movies and music. The shares on my internal drives mount correctly through SSH to the WD Live but I get this error when trying to mount from the external drives:
Code: # xmount "//192.168.0.195/Films" "Films" cifs
mount: mounting \192.168.0.195Films on /tmp/media/usb/Films failed: Cannot allocate memory
xmount: xmount //192.168.0.195/Films Films cifs user=guest,iocharset=utf8,ro FAILED WTF?!? Also, I get this info when I run the command on SSH to see my shares:
[code]....
I am running windows 7 64 bit, and have 4 external hard drives attached (not the best way, but until I can afford a server, the only way). I am using my computer as a media center only. When I wake my computer it can take a while (30 seconds to a minute), before I can use it, due to it starting up my external hard drives, but I have noticed a couple of times, my computer will wake without starting up my external hard drives (able to use media center within 2 seconds). Does anyone know if there is a way to get my computer to wake up without starting up the external hard drives every time?
View 7 Replies View RelatedMy external hard drives partitions are hidden in windows 7
View 2 Replies View RelatedI plug quite a few different hard drives into my PC running windows 7 VIA a usb 3.0 Nexstar SATA adapter, normally just bare hard drives that need data backed up or moved, and as time goes on it seems to get slower and slower to find and bring up a new drive when i bring it in. My assumption is that it caches all the drivers for each drive and searches them to see if a matching driver is already installed for that specific device, or something of the nature. I had thought the 2-5 minute wait when plugging in a hard drive was just how W7 operates but apparently this is not the case according to some other tech savvy people i've talked to. Other USB devices such as flash drives don't take nearly as long to come up as a SATA I could clean out so as to get the process back onto a fresh leg.
View 6 Replies View RelatedI have a new Dell with windows 7 and I have three external hard drives which I use on three other machines with xp pro one them. This machine will not open these drives and demands a format. They work perfect on my other machines
View 2 Replies View Related