one week ago i purchased HP-1000 series laptop which came with pre installed windows 7 but my hard drive failed and a new hard drive is given to me but i dont have the cd of windows 7 or the backup please suggest how to install a valid copy of windows 7 using product key
View 3 RepliesI have a drive that was using PGP that has become damaged and will not boot despite trying 3 days of different fixes and repairs. I have a complete drive backup that will restore but when I try and boot after my PGP password I get 'Missing operating system'. Again I have tried decrypting and fixing but to no end.
I have another disk with a working and booting install of Windows 7 (same architecture etc) on. I have the entire contents of the non-booting system disk that I can access from the image of it.
If I booted into something like Windows Recovery or Live Linux environment, can I copy the entire contents of the non-working Windows 7 drive over the working one and expect it to work and then boot?
I'm new to this forum and your tutorial, but they have already served me fine. Right now I'm stuck in your "How to Create a System Image Backup in Windows 7". I (think I have a backup) on an 5yr. old 40g portable done with HDClone. Now I'm trying to follow your Win 7 Image Backup, I do have a few more older HDD's but I want to use a new 32g Corsair flash, but "Create a System Image" keeps giving me a "the drive is not a valid backup location." Do you have any ideas if/how to get around this??
View 9 Replies View RelatedI'm stuck in your "How to Create a System Image Backup in Windows 7". I (think I have a backup) on an 5yr. old 40g portable done with HDClone. Now I'm trying to follow your Win 7 Image Backup, I do have a few more older HDD's but I want to use a new 32g Corsair flash, but "Create a System Image" keeps giving me a
"the drive is not a valid backup location." Do you have any ideas if/how to get around this?
When trying to Create a Back Up System Image having correctly formatted the memory stick. I am confronted by, "the drive is not a valid backup location".
View 7 Replies View RelatedI'd like to just do a clean install of Windows 7 Pro on a new drive for the same computer and use the previous drive for storage. But want to make sure everything goes well first. Oh and it's the windows 7 pro OEM system builder pack version.
View 4 Replies View RelatedI know this is a simple question, but how do I make a backup copy of a new program disk in Windows 7... which I am allowed to do (according to the terms and agreement)? I want to do this so I have a backup in case the original disk fails.
View 12 Replies View RelatedI am not able to make backup, I get message not enough free space for shadow copy? How do I resolve this? I understand some kind of USN journal is created on System reserved partion. This hidden partition was created when I installed and now I have only 38Mb free out of 100Mb. As I understand this has been an Issue for more than a year, and still Microsoft has not resolved?
View 4 Replies View RelatedI have Asus N55SF laptop, with Windows 7 SP1 64 bit. Also, I have 2 external hard drives. One with USB 3.0, and one USB 2.0. Following problems, I am going to describe below, happen to the both of them. Just to mention, external drives are tested on desktop computer and following problems do not happen.Let me now describe what happens when I try certain actions:
- When I try to copy large files (10 or more GB) I get an error that destination is no longer visible. External drives disappear from My Computer and I can't do safe remove. But when I copy files using programs FastCopy or TeraCopy everything copies well and drives do not disappear.
- When I try to do Windows Backup and encrypt them using BitLocker drives also disappear, and are not visible within OS.
- There is a difference between external hard with USB 3.0 port and the one with 2.0 port:
1-when one with 3.0 disappears after described actions I can't see it from Device Manager, I can see it only after windows reboot. USB 3.0 disk connects to one USB 3.0 port on laptop.
2-when one with 2.0 port disappears I can see it from Device Manager, and I only have to unplug it, and plug it in again to see it. USB 2.0 disk connects to 2 USB 2.0 ports on laptop.
Common to both disks is that when then disappear from My computer the diode on the external disk cases are still flashing, what probably means that they have some power. Both disk are formated to NTFS, and Allocation unit size is set to: Default. Their removal policy is set to: Better performance (default). On laptop I only have Windows, Office and Asus drivers. Antivirus is: MSE.
I have already made my "Outer Volume" on my back up HDD with Truecrypt & now using Second Copy to copy my main media HDD to my backup HDD. Once I copy the data & am then going to create the "hidden volume" option Truecrypt offers. How will this sync up with Second copy? If it makes a difference in syncing second copy I would also like to set up the main media HDD the same way with the Outer volume & hidden volume options. So keeping it a perfect encrypted sync if possible.
View 3 Replies View RelatedI want to do a 100% backup of the C: drive on my PC. Since Tom's Forums still doesn't have a forum search (although I'm sure it did before Tom sold out) I'll ask in innocence.Supposedly XCOPY has been bonged in Win 7 and replaced by ROBOCOPY. If I copy ROBOCOPY to another drive, will I be able to do a 100% backup of my C: drive to an external USB 1.5TB HDD? Is there there something better that might just compress and backup?
View 6 Replies View RelatedIt seems that the copy and replace only checks names, but I would want the older files to be replaced by the newer ones, and to be ignored if they have the same names and dates. ouadad has chosen the best answer to his/her question.Click here to view the answer that was selected.
View 1 Replies View RelatedI have tried a few backup programs but I'm trying to find out the best way of copying around 500gb of files and keeping all the dates, attributes and security permissions intact?
View 3 Replies View RelatedI am making regular backups - both the image backup and the file sets using Windows 7 Backup program. No problems with that.
But, I periodically would like to copy the image backup to a portable drive. I plan to take this portable drive offsite to a secure location - I call it my archive.
Is this possible? What files must I copy? Do I have to maintain a certain directory structure or naming convention in case I have to use the archived copy to restore (assume a bare metal restoration)?
I thought I could just copy the VHD files (boot and system) but the image backup has other directories and files and I just don't understand their purpose.
I need to copy these files rather than running the backup over again to this portable archive device. I have multiple computers and it is impractical for me to physically access each computer to re-run an image backup to the same archive device.
My archive device is a regular USB/eSata HDD and I don't plan to put VSS on it.
I have Asus N55SF laptop, with Windows 7 SP1 64 bit. Also, I have 2 external hard drives. One with USB 3.0, and one USB 2.0. Following problems, I am going to describe below, happen to the both of them. Just to mention, external drives are tested on desktop computer and following problems do not happen.
Let me now describe what happens when I try certain actions:
- When I try to copy large files (10 or more GB) I get an error that destination is no longer visible. External drives disappear from My Computer and I can't do safe remove. But when I copy files using programs FastCopy or TeraCopy everything copies well and drives do not disappear.
- When I try to do Windows Backup and encrypt them using BitLocker drives also disappear, and are not visible within OS.
There is a difference between external hard with USB 3.0 port and the one with 2.0 port:
- When one with 3.0 disappears after described actions I can't see it from Device Manager, I can see it only after windows reboot. USB 3.0 disk connects to one USB 3.0 port on laptop.
- When one with 2.0 port disappears I can see it from Device Manager, and I only have to unplug it, and plug it in again to see it. USB 2.0 disk connects to 2 USB 2.0 ports on laptop.
Common to both disks is that when then disappear from My computer the diode on the external disk cases are still flashing, what probably means that they have some power. Both disk are formated to NTFS, and Allocation unit size is set to: Default. Their removal policy is set to: Better performance (default). On laptop I only have Windows, Office and Asus drivers. Antivirus is: MSE.
After an auto-update and reboot, a Dolby error popped up saying "The current Dolby audio driver is 7.2.8000.13 and the software application expects driver version 7.2.7000.11. Please install a valid driver and software application combination." What can I do? I can't find any downloadable updates anywhere.
View 3 Replies View RelatedI have an Acer with Win 7 Home Premium (64bit) and I would like to re install it?Where can I get a copy of Windows 7 to re install it? I have the original key what it came with?
View 4 Replies View RelatedA friend of mine have a pc with invalid windows 7 installation (I get a message that that I may be a victim and so on...).I have a real original windows 7 pro copy that is still new and wasn't registered yet.Can I register the bad copy with the key of the good one so it will be legal and she want need to reinstall windows 7 (because then she will need to install all the other programs she already install on it).
View 8 Replies View RelatedI've been wanting to upgrade to getting an SSD and I was just wanting to know does anyone know if you're able to install a copy of Windows twice if it's from an OEM copy? I bought an OEM off of Newegg and the only thing I thought was different was that it didn't come with a manual and other things that really aren't necessary, but I heard somewhere that you aren't able to use OEMs for doing a OS wipe and reinstalling and it's just a one time thing.
Will I have to also buy another copy of Windows 7 anyone know? If that's the case I'd rather hold off for another month or two before I buy my SSD.
Also I'm planning on getting a Samsung 840 Series
Today I restarted my main audio machine and the C drive wont bootTurns out the pcb on the drive has a burn mark... So by luck there is a identical drive in the same machine bought on the same day I unscrewed the pcb from the working drive and gave it a shot and to my surprise my data recovery software - file scavenger was able to recover all the files and folders in their native file structure....I want to now move them to the new drive and have it boot up into that system...I was wondering if I install a fresh os Windows 7 64 on to the new drive and pull that drive out of the machine and put it on the chain of the other computer that has the rescued files on it. Can I then copy the rescued files to the drive with the freshly installed Windows 7 64 on it and over write the files with my old systems files? After doing that and returning the drive to my old system will the old system boot up? Is there any tricks anyone can suggest short of re installing everything. I have a shitload of 3rd party plug ins which would take months to re instal... Not to mention my dsp audio card drivers and host environment, utils and the list goes on.If i can get this up and running I swear I will make a backup image and will never be in the same situation again...
View 4 Replies View Relatedi had Windows 7 in my system but i wanted to format the drive and install a new fresh copy, so i went ahead and i started Windows 7 dvd and i have to mention that the hdd that i had my old win installed in was a partition of a 1tb hdd and it's divided into(195GB &750GB), so my system was installed in the 195GB partition. then i went into installation and i formated the 195GB hdd and when i hit next it gives me this meassage "Windows is unable to install to the selected location (Disk1 Partition1). Error 0x80300024".
View 9 Replies View RelatedI would like to instal a fresh copy of windows 7 on my laptop but don't have the disks. However i found the product keys on the bottom of my laptop that i am sure are windows7. now where do i find the disks?
View 2 Replies View RelatedCan i legally use my copy of a full install W7 on all my pc's or just one!
View 19 Replies View RelatedI have a desktop with Windows 7 & a 1TB HDD, and everything is on the HDD. If I want to add an SSD & put the OS & some programs on it is there an easy way to do that? Perhaps copying all the data folders to an EHD & then making an image of the stripped down HDD & restoring that to an SSD? And then putting the data folders back onto the HDD?Or do I have to start from scratch & re-install a fresh copy of Windows 7 to the SSD?
View 5 Replies View RelatedCan i install printer drivers if the copy of Windows is not genuine?
View 1 Replies View RelatedI have a laptop ASUS G60JX and it came with Windows 7 Home Premium OEM Pre-activated, so unfortunately i have formatted it now i want to install a WINDOWS 7 HOME PREMIUM X64 BIT OPERATING SOFTWARE, so which one should i download a RTM version or OEM version, because i want to download a copy of windows and then i will use my genuine key which is installed under my laptop, reply asap.
View 1 Replies View RelatedI keep getting a restart message upon booting while trying to install a legitimate copy of windows 7 64 bit on an HP Pavillion a6130n. This is a clean install on a reformatted drive.I have added memory and thats about it
View 9 Replies View Relatedi want to do a clean install of windows 7,I currently have windows 7 32bit and i wanna upgrade to 64 bit. Question 1) I only want to upgrade to 64 bit and not clean the entire hdd, so all i have to do is format my local C: drive where the current win 7 is installed right? or i have no choice except cleaning the entire 500 gb hdd,. Pls tell mee its not necessary to clean wipe coz i dont have any place to backup my entire hdd,Question 2) If only C: drive is to be formatted, how do i backup all my installed programs? Will System Backup store all my installed programs that i installed on 32 bit and restore it back on the 64 bit os? or do i have no choice and reinstall all of them? I ahve lots of codecs installed that i dont remember where i found on the internet.Question 3) I have major softwares like Adobe CS4 master collection and Autodesk MAYA installed on D: Drive, so will they still work after i clean wipe the C: drive and install 64 bit instead of 32 bit or do i have to reinstall them too?
View 10 Replies View RelatedSystem SpecsDell Studio 540Intel Q8200Windows 7 64bit Ultimate Edition Retail (came with Vista) I feel kind of dumb not knowing this but here we go. I consider myself very knowledgeable about computers but I'm not sure if there is a utility for what I want to do. My parents computer is having some issues I replaced the hard drive and i used Acronis True Image to copy the hard drive so they wouldn't have to redo all there bookmarks and personal info for there websites and just the general windows settings like wallpaper etc. So since i have done this something just isn't quite right something must of been corrupted from the old hard drive. So anyways I am gonna do a clean install and i was wondering if there is a utility that will allow me to save everyones profiles so that i can just pop in a disk and restore all the settings. I am not worried about any files or programs on the computer I have them all backed up my only concern is windows settings themselves.I just can't figure out how to do this if there even is a way to backup everyones profile settings.
View 8 Replies View RelatedSSD boot drive failed after just 5 weeks. It takes me an entire weekend(at least) to reinstall and reset everything. Not to mention lost saved passwords and some other important data that I did not get backed up which leads me to my question. Can I use my Last Windows Image backup to install on the new boot drive and if so how?
View 2 Replies View RelatedIt's time for me to change HDD. I wanto to go for a fresh Windows 7 x64ultimate instal. Now, I wonder, Can I backup and load something like "control panel settings"? That way I could load them after. On the new Windows 7 installation. Something like:
1) Backup settings
2) Change HDD
3) Mount new HDD
4) Fresh install
5) Load settings.