Windows 7 Periodic Reauthorization?
Oct 25, 2010I've just gotten into an asinine heated debate about XP vs. Windows 7.The individual keeps arguing that Windows 7 periodic reauthorization is a major problem for Vista and Windows 7.
View 9 Replies
ADVERTISEMENT
Periodic Crashes - Critical Event 41 (63)
Mar 8, 2012My PC is just under 2 years old. It's a Dell Inspiron in which I upgraded the PSU (Corsair 550W) and the graphics card running Windows 7 Home Premium 64. Until earlier this year, I had no problems with it at all. I started getting crashes early/mid Feb. I recently (last week) replaced all the RAM, upgrading from 6GB to 8GB (Corsair). I reformatted and reinstalled Windows 7 completely. Including removing all the Dell partitions (was originally setup by them).
Up until the end of Feb 2012 I had Sophos running on my machine but currently need to reinstall virus checker. I try to keep everything updated. I updated the BIOS and graphics drivers; I cleaned my fans. I've run various diagnostics etc but I keep getting these crashes. It seems to happen particularly often when I'm playing Star Wars: the Old Republic but not exclusively. I've included all the files for analysis.
Periodic Black Screens Persists For 3-5 Seconds At A Time
Feb 15, 2013I just built a new computer and it's been running decently up until I tried playing some video games on it. When running games (e.g., World of Warcraft), my screen freezes up for one second, followed by a black screen for a few more seconds. After that, the gameplay resumes, but I'm sitting there wondering what just happened. The sound is still intact the entire time.Sometimes it occurs frequently, and sometimes I can play for an hour or more at a time without any black screens. I've been trying to figure out what has been triggering it (i.e., exploring new territory in-game, etc.), but haven't found anything conclusive.I have a feeling it has to do with my video card (NVIDIA GeForce GTX 460 v2), but I'm not sure. I checked for overheating problems with CoreTemp, but found that the temperature was stable during gameplay. Specifically, right after the crashes I would check the temperature and see that it was average and unwavering.
View 3 Replies View RelatedWindows 8 Accidental Overwrite Windows 7 / Dual Boot Windows 8 And Windows 7?
Jul 13, 2012Hi everyone. I installed Windows 8 today. I did partition the disk like in a guide, however, I missed where to install...I downloaded a Windows 7 iso image today and burned it to a disk, will I be able to install Windows 7 again from a disc? I still have Windows.old folder in my C drive, is there any way to dual boot Win8 and Windows 7?
View 9 Replies View RelatedWindows Boot Manager Windows Failed To Start For Windows 7 Status 0xc0000225
Jun 8, 2011I am getting the following error from past 2 days :-It says "Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. insert your Windows installation disc and restart your computer.
2. Choose your language settings, and click "Next."
3. Click "Repair your Computer".
Status: 0xc0000225.
Since i dont have the recovery disc so i downloaded the one from torrent but of no use as it failed to read from the USB.
Migrate Windows.old After Changing From Windows 7 Ultimate To Windows 7 Home?
Jan 25, 2012I installed Win 7 Ultimate onto my brothers Win 7 Home Edn laptop. I didn't realise at first and he has done quite a bit of work on it since the installation, on iTunes and the like. I only noticed the error when trying to activate windows and, of course, as the laptop is Home Edn, and I used an Ultimate disc it didn't take the key on the laptop. So I have now installed Home edition and have the Windows.old folder present. I basically need to put all the programs and file/folders etc into the new OS.
View 4 Replies View RelatedWindows 7 X-Fi Fatality Pro Windows 7 X64 / Losing Sound After Restart Windows
Oct 18, 2012the XF's are lost after rebooting Windows and it does not happen every time, ie occur alternately eg after 2 and sometimes 10 days...then i go to device manager sound and i have sb x-fi but at sound i havnt sound icon so i click right at sb x-fi icon at dm and uninstall...reboot windows..after rebooting sond install by itself my sound card from motherboard is disabled at bios.
View 7 Replies View RelatedReinstall Windows 7 Old (windows 7) After Installing Windows 7 For 2nd Time?
Nov 26, 2011the stellar customer service at Dell I have had to recently reinstall windows 7. I was running windows 7 prior to this installation and therefore those files have been moved to windows old. How do I reinstall this file? I'm assuming the process is the same as for other versions but being as I'm not that technically savvy I don't know how to change the command scripts to suit my situation.
View 9 Replies View RelatedWindows XP And Windows 2000 Both Allow To Use The Windows Tool ALockout.dll?
Aug 18, 2011I have a PC running Windows 7. It is constantly being locked out, and windows XP and windows 2000 both allow you to use the windows tool ALockout.dll to discover which process is causing the lockouts. Does anyone know if there is a similar program for Windows 7?
View 6 Replies View RelatedTroubles Transferring Windows Mail Vista To Windows 7 Windows Live Mail 2011
Apr 22, 2011MS and their mail systems are giving me grief. I have a Vista 32 PC using "Windows Mail" and want to transfer email folders (lots) and messages to Windows 7 using Windows Live Mail 2011.Windows Mail was a replacement for Outlook express on Vista.Windows Live Mail 2011 is a replacement for Windows Mail on Windows 7.I tried a couple of things.
1) Basic Export and ImportI exported relavent files: Account info, Contacts and all the messages to a folder (in Windows Mail format) on old computer and used the old "Addias" transfer - copied folder to stick and RAN it over to the new computer.
- Imported (using the Windows Mail format) the Account info successfully,
- imported the Contact info successfully.
- Import Messages - appeared at first to be successful
Issue: Message folders appear to be renamed and some folder names have been truncated, not all folders appear to be there. (Looks like "long Name folders greater that 8 characters get truncated)
2) Tried the "Easy transfer mechanism (Vista and Win7 transfer utility) - but couldn't get the new computer to see the Vista even though I could see them on the network. I thought that this would transfer the folder names correctly.I'm about to try a time consuming effort of coping folder by folder (export/Import)What I am more concerned about is that the individaul messages may have the same issue Ie not all coming accross and subject names being lost. Looking for alternative or third party transfer solutions?
Windows 7 Hangs On "Starting Windows" After Finished Expanding Windows
Jul 17, 2012I just bought myself some new parts for a new computer I built. After buying the parts and assembling it I tried to install windows 7, keeping in mind that this computer has no previous os installed in it, completely blank. I somehow managed to get to safe mode and install till the part where it says expanding windows files completing that step fully and rebooting to continue the installation, I have no idea why but after when it restarts, it freezes at the "starting windows" screen with the four orb animation. It should just go to the next screen with the blue wallpaper asking me for the language I would like and what not. But it just gets stuck there and doesn't move on, I tried
rebooting
removing as much devices I had plugged into the motherboard
removing everything but the mouse and key board
removing the graphics card
removing one of the two sticks of ram
[code]...
I have tried everything I know of and I don't think I need to update my bios because no one else has encountered this problem. Swell I am not very good with computers I am very new to this so...I also heard about updating drivers , but don't u need to actually be able to login to your computer to download and install them? I can't even log in, I wait for the windows logo to pass but it never does please help Tom Hardware community.
Add Another Windows 7 To Windows XP/ Windows 7 Dual Boot?
Apr 8, 2011I bought a new computer that came with a Win 7 HP license, however I already have a copy of Win 7 Ultimate on another smaller HDD that dual boots with XP.I have copied the Win 7 HP partition to the smaller HDD that has dual boot Win 7 Ultimate / XP using EASUS Partition Manager. Then I disk copied the smaller HDD to the new larger HDD thus wiping the original contents of the HDD.So far so good, the larger HDD now has C: Windows 7 Ultimate; D: XP Pro; E: Windows 7 HP. Of course the boot manager only has entries for the C: and D: partition.I think I can use bcdedit to add another entry but I am a little confused about how to do this, I've seen examples for Win 7 and XP or Vista but not for 2 copies of Win 7. Can anyone tell me what bcdedit commands I need to run? For instance I could run "bcdedit /create {} /d "Win 7 HP" but I don't know what to put inside of the {}, I think I need a new UUID but I don't know if I should be running "bcdedit /createstore" first or something else.
View 1 Replies View RelatedWindows 7 Hangs On "windows Start" After Windows Install
May 2, 2012Yesterday i wanted to change my OS to windows 7 64bits (I had windows 7 32bits before and worked just fine). The installation goes well but when windows install tries to reboot to complete the installation it hangs on "windows start" and reboot again and again. I tried several solutions such as
- Install using a different cd (3 different cds and same problem)
- Install from USB flash (not even working)
- Fix boot system (from command prompt using windows repair cd)
- Re-install windows 32 bits (same problem)
- boot in Safe mode (same problem it reboots again and again)
- Windows system repair (from cd)
PS:I have a Dell inspiron M 560 (Core 2 Quad, 4Go in RAM).
Windows 7 Toshiba A505 Windows Boot Manager And Recovery Media Failed
Feb 20, 2012I have a Toshiba Satellite A505-S69803; serial number Y9340538Q, with Windows 7, 500Gb HDD at 5400rpm and 4Gb RAM... I think that's all correct.Anyway, long story short, I got a b!tch of a virus, which apparantly was doing all sorts of nasty things to the explorer.exe file in particular. So I backed up all my important stuff: files, Uni work, writings, music and photos etc onto an external hard-drive and went about restoring the laptop to out-of-box factory settings by making the Windows 7 Recovery Media Discs. But when I try to use the discs I get told after about 30 minutes The Toshiba Recovery Wizard "Can't read from the source file or disk: PREINST5.SW5" with options to: Try Again (The same thing happens), or Skip (Same message again), or Cancel (in which case I'm back where I started).After the Recovery Wizard failed I chose the option to erase the hard-drive; it then appeared that when I turn on the laptop as normal I was told <Error>: F3-F200-0002 and the Recovery Media Disks still refuse to work.Now, if I turn on the laptop as normal a message telling me to insert the installation disc, choose language and click "repair your computer". So I put in the recovery disc and get the same message.
Toshiba can't help as my A505 is an American model in Britain and out of warranty anyway. Europe Toshiba HQ don't supply the recovery media for the A505 and the American based Toshiba aren't allowed to send the Recovery Media to Europe; so apparantly I get no help from them. And Microsoft can't help me because my laptop was purchased with everything pre-installed so the codes associated with my Windows and Office are comletely irrelevent.I have been told that I need to purchase a compeltely new hard-drive and purchase Windows 7 brand new to get my laptop back up and running. Purchasing a new OS isn't too much of an issue because I can just get XP for a tenner, validate it with Microsoft and then get a student upgrade onto W7-Ult for �60. So �70 in total, I'm fine with that. But do I need a new hard-drive too? Or can I rescue everything I already had?
Fresh Install Windows 7 Ultimate - Windows Cannot Access The Specified Device, Path, Or File?
Aug 30, 2012I just installed Windows 7 Ultimate on my Dell Optiplex 755. It originally had Windows Vista Business. 64 bit OS. After Win 7 Ultimate installed I immediately want to access files or folders and I'm hit with a Explorer.EXE
Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item.So after doing some research I re-installed a second time this time formatting the drive first. Then installing Windows 7 Ultimate. As soon as I get to the desktop I received the same error as mentioned.
Downloading Files From Internet Nor Windows Player Runs Properly After Installing Windows 7?
Feb 6, 2011I can neither download files from internet nor Windows player runs properly after installin Windows7.
View 1 Replies View RelatedUnable To Download Windows Updates KB2524375 And KB9478321 For Windows 7 Home Premium?
Apr 22, 2011I am unable to download windows updates KB2524375 and KB9478321 for my windows 7 home premium. I have downloaded Hot Fix KB947821 but still get error. Log shows MUM 0X00F0900. Its seems that I have a registration problem but my windows was downloaded on my new acer computer. These are the only updates I have been unable to install.
View 2 Replies View RelatedWindows 7 Update = Mozilla Constant Crash & Windows Explorer Has Stopped Working?
Mar 4, 2012Had a bad storm last night, so I shut down the comp. Restarted this a.m. tried to stream the Arsenal match and mozilla would crash every time I tried to leave the home page. Went to IE, watched the match, and then began to TS moz. After a bit I decided to unistall. Upon trying to reinstall i get a corrupt file error msg during extraction. I then tried to d.l. Chrome and had problems w. that too. Yet amazingly enough, IE works fine. Is this Microsoft just f'in w. me 'cause I'm not amused?I also notice that in my start menu I have no quick select icons for network connections, control panel, etc.
Mobo: Biostar A880GU3
CPU: AMD Phenom II 965
GPU: ATI HD 5770
PSU: Corsair 750w
RAM: 4GB (2x2) DDR 3
HDD: WD 320gb
OS: Win 7 Pro 64bit
Wireless Mouse Doesn't Work Windows 7 64bit But Works On Windows 7 32bit
Apr 12, 2012I've just recently purchased a generic wireless mouse from eBay. more specifically, this one: 2.4GHz USB Receiver Wireless Optical Mouse F PC Laptop | eBay it doesn't work. I'm running Windows 7 64bit and it started installing the drivers, first it was installing "HID Wireless Mouse", then it switched to "USB Input Device" but failed after 3 seconds. now it's listed in Device Manager as "USB Input Device" with yellow sign that indicates it doesn't work. I tested it in 2 other Windows 7 32bit computers and it works just fine! installing drivers and everything. moreover - I testes my bro's logitech wireless mouse on my 64bit Windows 7 computer and it works fine. I think Windows fails on recognizing it. I mean the drivers are there.. the Logitech Mouse works but mine doesn't.. how do I make it work?
[URL]
Formatted Windows 7 Loads Shows Windows 7 Logo And Screen Blank With Cursor
Oct 28, 2011Formatted Windows 7 loads shows Win 7 Logo and Screen blank with cursor
I have an Acer laptop 4551, got hit by nasty viruses and on top no restore intact.
I formatted the hard drive which gave me an error 83% and stopped. Today I turned on laptop to install fresh genuine Windows 7, I popped in the DVD and done everything in BIOS selected Boot from CD. Everything was Ok I hit enter to Continue then comes the Windows 7 logo and after that a blank black screen with Cursor, that's it! I done that some 5/6 times but no luck.
Loaded Windows 7 And Hard Drive Light Blinks Then Starts To Start Windows 7?
Dec 5, 2012I have a lenovo pc 9210 all diags pass all hardware is good. was running xp fine loaded vista ok loaded windows 7 32 bit runs ok, needs windows 7 64 bit...loaded windows 7 64, reboots after load begins first time setup then completes as normalreboots ....and hard drive light blinks .... then starts to start windows 7 but gets the four colored dots then just sits there no more hd lights no , no nothing.
View 2 Replies View RelatedMusic File Properties Not Saving From Windows Vista Comp To Windows 7?
Aug 14, 2012I transferd all of my music files from my old laptop whih is a toshiba windows vista. Most of the files have the artist, album and genre. Howvere, when i view them on my new laptop a lenovo ideapad iwndows 7, it isn't showing the properties for most of them...some yes...but very few. i just dont get it. I tried t save to a hard drive and then save to the new comp and to save to a flash drive and upload...same result both ways. I dont want to have to go through all 2000+ musc files and reenter all the properties..
View 7 Replies View RelatedWindows 7 Ultimate 64bit Installation: Hang After 'starting Windows' Screen?
Jan 28, 2011After i press any key to reboot from DVD, the windows is loading. But when it reach to the screen where we suppose to select language, currency & time format and keyboard layout, the screen become stuck. Mouse cursor doesn't appear and keyboard also not available to use.
View 6 Replies View RelatedChange From Windows 7 Home Premium To Windows 7 Professional Without Losing Files?
Nov 12, 2011Is is possible to change from Windows 7 Home Premium to Windows 7 Professional without losing files? Both are 64 bit.
View 4 Replies View RelatedCan't Connect Print From Computer User Windows Xp 32bit To Windows 7 64bit
Aug 2, 2011I can't connect print from computer user windows xp 32bit to windows 7 64bit?
View 7 Replies View RelatedWindows Live Mail 2011 Installed But Windows Update Not Complete
Oct 25, 2010I applied a Windows Update the other day without realizing that I was doing a major update from Windows Live Mail to WLM 2011. The installation progress window stopped at about 50% complete and just stayed there. After doing some Googling about the update (KB2434419) I read that behind the progress window is another window which asks the user whether all Windows Live apps are to be installed and updated or just the ones that have already been installed. I had been using only Windows Live Mail, so I chose to update only that application to WLM 2011. The installation appeared to run successfully, and I have been using WLM 2011 for two days. It works fine, although I've had to get familiar with numerous changes to its appearance and user interface.
The Windows Update icon is still at the right end of my taskbar, however, and when I click on it, the progress window is still showing "Installing update 1 of 1" about 50% complete as if it does not realize that the installation of WLM 2011 finished two days ago! The only option in that window is a "Stop installation" button. I am afraid to click that button in case it initiates a rollback of the WLM 2011 installation. Why does Windows Update think that the installation isn't complete? How do I terminate the session of Windows Update and not disturb the WLM 2011 installation that completed two days ago? Do I dare kill the Windows Update process that is running?
Windows Update Is Not Working In Windows 7 Professional, Error Code 8024402F
Jul 21, 2012My OS is Windows 7 Professional 32-bit, Unable to update any file from windows update. Same error code 8024402F occurs and Windows could not search for new updates.Whereas my internet connection is working fine and i able to browse and download from internet.Also tried Microsoft Fix it and it says Repair windows update components. After applying it still same error occurs.Even disabled AVG Internet Security 2012 and still same problem.Here is the log detail from windowsupdate.log
2012-07-21 18:19:18:545 1256 8b0 AU ## START ## AU: Search for updates
2012-07-21 18:19:18:545 1256 8b0 AU #########
2012-07-21 18:19:18:548 1256 8b0 AU <<## SUBMITTED ## AU: Search for updates [CallId = {7CB9454F-3210-479E-A30A-D356B61C2A99}]
[code].....
Windows Live Messenger (MSN) Doesn't Minimize To Notification Area In Windows 7
Dec 1, 2008In Windows 7 beta, Windows Live Messenger doesn't minimize to the Notification area, but instead minimizes to the taskbar. This tutorial will teach you how to fix it.
View 0 Replies View RelatedLaptop Windows Boot But Freeze At Animated Windows 7 Logo Screen
Jun 28, 2012i have a desktop computer i used it to install Windows 7 ultimate x86 and i have a laptop i used it to install Windows 7 ultimate x64 the desktop and laptop both support x64 systems, i cloned both computers with Norton ghost and when i restore the cloned image to it's own computer it works with no problem but when i try to restore the image from my laptop to my desktop computer or the image from my desktop to my laptop windows boot but freeze at the animated windows 7 logo screen? i tried to generalize the system with sysprep but i failed cause my computer want start after i used sysprep?
View 9 Replies View RelatedWindows Error And BSOD - Windows Update Installed On Wrong Drive (?)
Jan 31, 2012my computer has been dead for the last few days so to speak. For two days ago I turned on my computer - it started up just like any other day. I saw the Desktop and bang, blue screen of death. This has not happened since I installed Windows on my new SSD Harddisk (I'm running with two disks, one SSD for Windows and a HDD for everything else), so I simply started my computer again. (My computer worked just fine last weekend, no problems at all. I had a Windows Update and then this happened..).During the set-up it stopped after the Motherboard-image - I had to chose between starting Windows Normal or repair it. Starting Windows normally does not help - it just give me BSOD right before or right after hitting the desktop. (Sometimes even before the Welcome-screen). So choosing to repair Windows during the setup is the only thing I can do.
By doing so, Windows searches for errors. I get the following error codes: 0x0 0x490 ..and some with 6 f's.(Today and yesterday I only got 0x0, which apparently stands for 'unknown').Hitting F8 during setup and loading Windows in safe-mode (/secure mode?) does not help either, I get BSOD here as well.I have tried to change the boot location (different disks and from CD). As a standard, its booting from my harddisk - all though it's booting from the wrong disk (the HDD). When I'm choosing the SSD I can't get any further and I get the message: "Missing Bootmgr..". The only way to boot the computer correctly (and maybe fix the missing boot manager) is by booting from a Windows 7 CD. I get the same two options (Normal / Repair) when booting from the CD though.. When I chose repair it seems to be fixing something - but in the end it says it couldn't find any errors. I have also tried to enter the following commands into the CMD: Bootrec /fixmbr Bootrec /fixboot Bootrec /rebuildbcd.The first two are completed with no errors or messages. The last one is unable to find any Windows installations (this happen when using both C and D).
I am able to use a safety backup copy which I took when I all out of sudden got access to the computer.. (Don't ask my why or how!), that is however not solving the problem, it's only allowing me to load the computer once. When it's loading it's checking the disk first and then loading normally -- I just tried that for a few minutes ago and my screen just turned black.
BSOD When Dual Booting Windows Vista 32bit And Windows 7 64bit
Jun 25, 2012I have another laptop and its a HP 2230s. I originally installed Windows 7 professional 64bit. But I have swapped the ram into my Lenovo ThinkPad. So the HP now has 2GB. I created a new partition and installed Vista Business 32bit on it. When I started the install windows .exe program in Windows 7, everything went well until it rebooted. When I rebooted, windows said something like:
Windows Boot manager:
The system cannot boot because of a recent change to files/hardware. (Something like that). Insert your windows disk.
So I just rebooted my laptop with the vista disk inside and installed. After, when everything was working, I wanted to go to the Windows 7 partition to un-install programs and copy some files over to the vista partition, the laptop just booted into vista.
I downloaded the easy BCD editior and visual BCD editor. (in the vista partition), I clicked the auto fix in visual BCD editor. It detected my windows installations. At the boot screen, I can select either Windows 7 or Vista. But when I select 7, the same error message appears.
Then I rebooted my laptop with a USB containing the Windows 7 (64bit) recovery tools. After, I don't have the message again. But when it goes to the starting windows animation, it stops halfway and it gets a BSOD. I tried debugging mode, it worked.
I found out that the larger partition, (Windows 7) is the C: drive. But when I boot into the smaller partition, (Windows Vista), the drive is also C:!. So I don't know what I could do.
I insert the windows 7 disk and repaired my installation, it just boots into windows 7. But when I insert the Vista disk and repaired my installation, it just boots into Vista!