I have a 1TB hard disk and I want to install win 7 on it only. I do not want to store any other data on it or use it for other purpose.
Is it better to partition into 2 parts and install win 7 in a small partition and leave the other partition empty, or is it better to install win 7 without partition the disk?
Ok I have an Eee Pc 1005hab netbook given to me. When booted it had the error message Grub error: no such partition. I searched the internet and managed to get into bios and somehow delete the partitions. Now my problem is I can't install windows onto any partitions I create. I've searched and searched for answers. there is not disc drive, only usb ports. I managed to create a windows 7 bootable USB which will not install.
View 2 Replies View Relatedam trying to install windows 7 on my acer note book and my partitons show cannot install on o disk partition 1 what can i do?
View 2 Replies View RelatedI wanted to create a new partition to try out linux. So I decided to shrink E: by 20 GB. I then formatted the free space into a new drive by right clicking and creating new simple volume. I was warned that the drive would be made "simple", but not knowing the implications, I went ahead with the procedure. Now on rebooting, windows won't load. I had made a repair disc, so was able to use it to check for any start up errors. It reported none. Moreover I used "diskpart" through cmd to find volume c: is dynamic.
View 1 Replies View RelatedI know there are tons of threads on this but as of yet none of them have helped.Trying to do a clean install on a Sony VAIO laptop PCG-71312l (or something close to that)Where do you want to install windows?I have Disk 0 Partition 1 with a total size of 298.1 and free space of 298.0 GB Type is primaryError message below says "Windows cannot be installed to Disk 0 Partition 1. (show details)"The details are:"Windows cannot be installed to this disk. The computer's hardware may not support booting to this disk. Ensure the disk's controller is enabled in the computer's BIOS"Well that's the fun part of the SONY VAIO - you can't do squat in the BIOS except change the date/time and boot order but I read that the VAIO will detect and setup everything automatically.So I Can't do any ACHI/IDE changes.
So if I just click on next I just get an error message of"Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information."I have deleted, formatted, created new partitions and restarted the computer 10 times. Nothing is getting me anywhereOh and I had to create a bootable USB from the windows ISO to USB/DVD program.I have gotten this to work just fine before with the same hard drive which was working just fine an hour ago.
I have a sony PCVRS220. i replaced the original HD with a 1tb WD caviar black. i am installing Windows 7 and i am up to the "where do you want to install Windows 7" screen. but i get a message "Windows cannot be installed to disk 0 partition 1."
I am using a sata to pata adapter
Manufacturer ASUSTeK Computer INC.
Model KIRIN-V
Version REV 1.xx
BIOS Vendor Award Software, Inc.
Serial Number 28000230-3016793
BIOS Version ACPI BIOS Revision 1001
Firmware Version 97.114
BIOS Date 01/08/2003
I am trying to load Windows 7 Pro the are 2 Partitions when i select any of the 2 i get the same massage that Windows cannot be installed to Disk 0 Partition 1 or 3 depending which i choose i then downloaded Drivers (SATA AHCI Driver) Into my USB the i got a massage No device drivers where found. then tried to format it goes up to 20% then fails.
it seems like i can't Excess my hard drive and the Total Size is the same as the Free Space Which means the is no operating system available
I have just built my new computer, and am attempting to install Windows 7 64bit thereupon. I am using a p67 asrock motherboard and 320Gig seagate hdd. Everything is going gravy when it tells me that it can't partition my hdd even though there is no other previously existing partition...
View 1 Replies View Relateda computer with a GIGABYTE GA-EP45-UD3P motherboard, 4 GB of RAM, and 2 60 GB hard drivesI tried to install Windows 7 but after choosing to install it through custom (advanced), it says "Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu." I tried going to the BIOS but quickly discovered i had no idea what i was doing.
View 3 Replies View RelatedWindows cannot be installed to Disk 0 Partition 1. Trying to do a clean install on a Sony VAIO laptop PCG-71312l (or something close to that) Where do you want to install windows? I have Disk 0 Partition 1 with a total size of 298.1 and free space of 298.0 GB Type is primary. Error message says "Windows cannot be installed to Disk 0 Partition 1. (show details)".
The details are: "Windows cannot be installed to this disk. The computer's hardware may not support booting to this disk. Ensure the disk's controller is enabled in the computer's BIOS".
Well that's the fun part of the Sony Vaio - you can't do squat in the BIOS except change the date/time and boot order but I read that the VAIO will detect and setup everything automatically. So I Can't do any ACHI/IDE changes.
So if I just click on next I just get an error message of: "Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information."
I have deleted, formatted, created new partitions and restarted the computer 10 times. Nothing is getting me anywhere. I had to create a bootable USB from the windows ISO to USB/DVD program. I have gotten this to work just fine before with the same hard drive which was working just fine an hour ago.
I resetted computer to factory state, assuming it would go smoother,cannot be installed.
View 26 Replies View Relatedi was try to install wind 7 to dell machine model DCNE, get the following message " windo can not be installed to this disk. this computer`s hardware may not support booting to this disk. ensure that the disk`s controller is enabled in the computer`s BIOS menu"
View 4 Replies View RelatedI'm trying to do a clean install on Windows 7 64-bit on my laptop. I currently have 32-bit Vista running.I initially created a new partition, copies all my data there, then started to do the custom install. I got the message: Quote: Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks. Quote: Esc when booting to take you into the EFI boot manager and select DVD-Drive instead of ACPI (....) string I have tried to go in to the start-up options but I don't see this option. I just keep getting back to the above error message.I have since deleted my extra partition, and intend just re-syncing my laptop's data via Dropbox (9GB - hope it will be ok!).
View 1 Replies View RelatedI want to install win 7 professional x64,i have a Dvd iso...Problem i want to solve is next,i have 1 sata disk ,and 1 ide disk...I want to divide Sata on two partition,c and d,and to install system on c..Next,my Ide disk ,has jumper on cable select,i think it could be the only way that is to pc work properly.Problem is ,when i install win 7 on partition c,next happens ,on My Computer,disk drives are not shown as Sataartitions c: and d: but its mixed somewhat,if i recall,itc c: of sata,and d is given t ide disk... i really want to know is there a solution to have primary sata c: and d: ,and than ide diskProcessorModel : AMD Athlon(tm) 64 X2 Dual Core Processor 4600+Speed : 2.57GHzCores per Processor : 2 Unit(s)Threads per Core : 1 Unit(s)Type : Dual-CoreIntegrated Data Cache : 2x 64kB, Synchronous, Write-Back, 2-way, Exclusive, 64 byte line sizeL2 Cache : 2x 512kB, ECC, Synchronous, Write-Back, 16-way, Exclusive, 64 byte line size[CODE]
View 2 Replies View RelatedThough there is 200 GB space available in my C drive I cannot create a disk partition using disk management , i am getting the available shrink space to be zero when I click the shrink volume.. but I do have free space..My system is Dell Vostro 1440.. How should I make the partition now?
View 1 Replies View RelatedSo, I need to know if I can install windows 7 x64 via direct boot when I start up my computer it is in ISO format. So like my default boot will be my DVD drive to install it. can I do that with it being ISO format?
View 12 Replies View RelatedI bought new hp laptop.. it came with 500 GB harddisk, windows 7 home basic, I didn't get any windows cd apart from recovery in hard disk. My windows is installed in c: and that is the only drive that it have... now the situation..
1) I want to partition my harddisk without losing windows means I don't want to format C: drive
2) I also want to install linux in dual mode with windows..
Second question is related to first one because I don't need any method that may lead to situation like I can't install any other operating system.
I want to setup a Raid 1 mirror from one drive to another using Windows software raid. I know in XP you could not do this on the boot partition (C drive). Is it possible to do this in Windows 7?
View 2 Replies View RelatedNo install disks, no manual just letter telling me to protect customer data entire drive was wiped clean including Recovery partition. Checked disk management it shows all 4 primary partitions used: 200mb (boot), 169gb (C drive), 281gb (D drive), 16.5gb Recovery partition. I tried F9 when booting (nothing) just boots into OS. This setup is completely useless to me. Called Asus ($50.) for install disk they said call Microsoft, call Microsoft ($99. new disk) they said call Asus, I've already paid for Win 7 once and i'll be damned if I pay for it again. Typical corporation bullshit.What I want to do is install Win 7 on 1st part, 2nd (shared NTFS part), Ubuntu on logical partitions.
View 5 Replies View RelatedI currently have a windows seven cd disk that I purchased from retail and recently I have tried to see if I could use the data partition that came on my laptop in order to recover my pc when I tried to launch system recovery from the bios it would just boot to windows normally. instead of trying to start up system recovery using a partition I wanna know how do I make a partition on my pc, and how do I turn that partition into a recovery partition using my purchased copy of windows 7 that would all me to be able to use that partition instead of a disk in order to reinstall windows.
View 3 Replies View RelatedHow to Fix Missing Vista Hard Disk Partition Letter in Windows 7 ?
View 0 Replies View Relatedmy hard disk converted to dynamic.now it is not booting, it have 300 gb data .i need convert in to basic and working normally.
View 2 Replies View RelatedIn my Sister's laptop, running Windows 7 Ultimate x86, all of a sudden, while she was working on the computer, the "E drive" went missing which was a partition on the hard disk (I don't remember if it was a logical or primary partition). She tried restarting the system but to no avail. So, I told her to open the "Disk management" tool in Windows 7 to see if the partition is visible in there. I did this because sometimes, in my computer, my expansion drive wouldn't show but it would be visible in the disk management tool and all I had to do was to re-assign it a drive letter. But, in this case, it wasn't visible over there.
So, now I told her to download "Mini-Tool Partition manager Home edition" and install it on her laptop. On running it, it wouldn't show the partition either. It would just show "C:", "D", "System Reserved" and unallocated space. However, when I added up the size displayed by C:, D:, System Reserved and Unallocated, it doesn't add up to the actual hard disk size. It means the partition is somewhere there but not visible. Is it possible that the partition would show up correctly if the laptop is booted into the bootable image of Mini-Tool Partition Manager?
I am preparing a laptop for sale, and have carried out a fresh install of Windows (booting from recovery CD). During this process, I selected 'Custom installation'followed by the hard disk partition containing my personal data and 'Drive options (advanced)', followed by 'Delete'. Is this a secure method of erasure or should I take additional precautionary steps before selling?
View 3 Replies View RelatedI just got a new hard drive and a dvd drive because both my hard drive and dvd drive both died. So I got it all set up in my comp and everything seemed to be going fine but I keep getting the windows could not format a partition on disk 0 The error occurred while preparing the installation. error code 0x80070057.
View 5 Replies View RelatedI've just purchased a new desktop Extra Value Desktop PC - Desktops | Ebuyer.com along with an OEM Windows 7 64bit. This is a fresh install on a brand new PC. Every time I get the same error message "windows could not format the partition on disk 0. The error occurred while preparing the partition selected for installation. Error code: 0x80070057". I've just removing RAM and still same problem. Even tried install XP and after 3 hours fomating the drive it it came up with this error ""Setup was unable to format the partition. The disk may be damaged."
View 9 Replies View RelatedI am trying to do a clean install of windows 7 onto my laptop, and I keep getting the error, "windows could not format a partition on disk 0. The error occurred while preparing the partition selected for installation. Error code: 0x80070057" . I have reformatted the hard drive and tried clicking next from there. This is the 64-bit version of windows 7
View 9 Replies View RelatedYesterday evening I was having computer problems so I decided to do a clean reinstall of WIndows 7. I cleaned out some partitions and then tried to put WIndows 7 on the fresh partition. The process began and then I got a mesage saying that Windows cold not format a partition on disk 0. This error occured while preparing the partition selected for installtin. Error code 0x80070057I also get a message when I restart the computer saying ¨Missing Operaing system¨ I´m guessing that that means I cant log in to fix this problem
View 3 Replies View RelatedI have an external 3TB hard drive, USB. I used a mac to partition it, 2.25TB is HFS+ (Mac OS extended - journaled) and the other is 490gb NTFS (to use on windows). It would not give me the option to use MBR (master boot record) so i used the GUID table. It works fine on macs, but windows tells me i need to reformat it. It is my understanding that most all 64bit versions of windows can read/write a GUID disk. I do not need to boot off of the drive. this is another addition to the list of "why i hate windows"
View 6 Replies View RelatedRecently I installed ubuntu 11.04. Now I have deleted the ubuntu partition using windows disk management. Now I can't boot the windows os! Even I tried the FIXMBR commands! Now it is showing 'BOOTMGR not found".
View 9 Replies View RelatedA couple of weeks ago a storm blew through and knocked out my power for a moment, then it came back on. Within a few seconds, another wind gust and it ripped our power lines down.Got power back a few days later, and have been busy trying to fix this on my own but to no avail.
My computer booted into system recovery tools, start up problem fixes etc. none of them worked, leading to the decision to format my SSD and try to reinstall windows 7. I get to "windows is copying files" and it stays stuck at 0% for about a minute or two, then I get "Windows could not format a partition on disk 1. The error occured while preparing the partition selected for installation. Error code: 0x8007057.
I concluded that I should try deleting the partition and creating a new one. That however, got me this message:Failed to delete the selected partition. [Error: 0x8007017].So I decided to try and format the drive, to this result:
Failed to format the selected partition. [Error: 0x8007057].
Same result as when I was trying to install. Puzzles me! I've still got a lot to learn.I've tried removing unnecessary RAM, same results.Having the same problem with a Vista 64 bit install disk, and have tried to install on my SSD and HDD with no differences.
System:
ASUS Sabertooth X58 MoBo
Core i7 920
6gb DDR3 1600mhz corsair RAM
RiDATA 32GB SSD (OS drive)
1TB Western Digital HDD
and one other 500GB HDD (I forget the brand)