Windows 7 Don't Start And Can't Even Restore
Aug 21, 2012
I had only one account name anju that was created when I first time started my laptop and this account had admin rights. Yesterday my son created his account test1 and gave admin rights to his account while he was logged in using my account. He also removed admin rights from my account. Now my windows are not starting, not even in the safe mode. When I try to start my computer it give me the option to repair computer. The repair fails and it gives the option for advance recovery, When I choose this option it ask to login. If I choose my account, it does not give option other than repair and it does not work. If I login using my son's account test1 which is now admin, it give the option to restore and dos prompt. If I take restore it says no restore points found. I'm thinking because as my sons account test1 is recently changed to admin, that is why its not finding any restore points. May be the restore points are created under the original admin account which was anju. So I want to assign admin rights to my account anju using dos prompt because windows don't start even in the safe mode.
View 5 Replies
ADVERTISEMENT
Sep 28, 2012
Problem: This morning I had a brief 1 second power outage while I was using my computer which forced it to shutdown. It just stood there shutting down for about 15 minutes when i decided to click force shutdown. After restarting, computer ran checkdisk and startuip repair because windows was not loading.
Issues; I ran chkdsk a couple times, lots of bad sectors./index files repairing recovering, but it ends up hanging at stage 4 at a certain spot. I left it running at that spot for over 5 hours and just stood there(I went to sleep and woke up at same spot). I booted with windows 7 cd and tried startup repair, the first 3 times it said it couldnt repair. It only showed 2 restore points available and both gave error messages saying they couldnt load. I ran a checkdsk /r again and was fixing a lot of stuff and hung at same spot again. Tried another startup repair, this time it said it worked but still the same problem, windows isnt loading. However, I am able to get to the login screen now after waiting about 10 minutes at the windows logo however my kieyboard/mouse functionaility seems to be gone so i cant even type my password to login at that point. I ran a diagnostic in the boot menu, when checking the harddrive it gave me an error. Ive tried booting to every option available, safe mode, safe mode with networking, safe mode with command prompt etc, nothing works. It brings me to logon screen after a long time but keyboard./mouse dont work at that point. Now, like i said i dont want to reformat my computer and lose all my files. My keyboard/mouse work with the windows 7 bootup cd doing those menus but not when it gets to logon screen booting the normal way. I was thinking of buying an external drive and installing windows on there and booting from there but im not sure if my computer would recognize it since it wont recognize my keyboard and mouse at login screen.
View 4 Replies
View Related
Nov 25, 2012
I am using a Lenovo Y450 Ideapad. When I turned on my laptop one morning, windows 7 refused to start up. After starting off with the initial Lenovo start up screen, a second screen of 'Loading Files' appears. It then goes into Startup Repair. After attempting to repair, a message appears stating that Startup cannot repair this computer automatically. It cannot repair and the only solution is to restart the system and the same cycle repeats. I have read some comments about using F8 and F2 but there are also no restore points (which is surprising) or any image points. I have important data and I usually back it up but havent done so in the last couple of weeks due to work. I am hoping that I can at least get the data out. Also, I do have a Windows 7 CD.
View 14 Replies
View Related
Oct 20, 2012
I cannot seem to start the Backup program provided with Windows 7.I go to Control Panel and click on "Backup up your Computer" and nothing happens. What do I have to do to start the Windows 7 Backup program?
View 9 Replies
View Related
Jul 1, 2011
I was having some problems with my computer. Seemed like it had a minor virus that my Norton wasn't getting rid of. I have all my files backed up so I decided to start with a clean slate and just restore my computer back to factory settings.i have a Dell Inspiron laptop. I performed the Dell DataSafe Restore and Emergency BackUp. I followed all the instructions and everything went fine. It told me it was successful and to restart the computer. I restarted and now Windows 7 will not work.i turn my computer on and a screen comes up that says "Windows Error Recovery" it gives me two options to "Launch Startup Repair" or "Start Windows Normally"... Starting normally just sends me backwards. I tried the Start Up Repair and it begins to run and then I get an error that it can not repair. There are some problem details/signatures if that is helpful but I don't understand them.I can't run in safe mode. I never made a set of recovery discs, I only have the disc the computer came with (drivers and software installation).
View 6 Replies
View Related
Jun 2, 2011
I have recently downloaded the windows theme installer and installed a new theme in my computer. After changing to the new theme and wanted to return my window theme to the original windows 7 theme, I was unable to do so.Even when I used the restore to original system file button in the window installer theme.
View 1 Replies
View Related
May 3, 2012
So the SMART program has warned me about an imminent hard drive crash for a while. Yesterday Windows was installing updates when my dad closed the laptop lid, when I come home afterschool today, I open the lid and it is frozen. Windows warns not to power off during the updates but since it is frozen I have no choice so I power it off. I have constantly getting BSODs, and have to do a system restore everyday so I was not too worried when it wouldn't start up. So i hit f11 when i turn on my computer and it takes me to the HP Recovery Manager, HOWEVER this time the option to do a System Restore was greyed out and I can't click it! I don't have working recovery CDs so what can I do about this?? My new hard drive is also coming in tomorrow, but i won't be able to replace my failing hard drive when my Pc can't even start up now, and I can't do a system recovery to fix it...
View 9 Replies
View Related
Nov 25, 2012
I got message in Word that there was insufficienmt memory to perform an operation so I rebooted. My PC wouldn't reboot and there was no last known good configuration so I ended up having to reinstall windows (had only installed it a month ago) Why should there have been no restore pointsa? Doesn't it automatically set them?
View 1 Replies
View Related
Jan 28, 2013
I bought Acer aspire one D270. My computer worked fine for 1,5 week. But I got blue screen at last night.I tried startup repairs and system restore. [code]
View 1 Replies
View Related
Jun 10, 2011
A client of mine (I'm an IT summer temp in a production facility) recently contracted the Windows 7 Recovery virus and contacted me to fix it. Having encountered the XP version recently and resolved the issue, I was able to easily remove the virus and associated rootkit. The difference this time was that unhide.exe failed to restore the start>all programs menu shortcuts, although it did manage to restore the folder structure. I read through and followed the instructions of another thread here: [URL]. Which did not resolve the issue. The output given by SystemLook is as follows:
SystemLook 04.09.10 by jpshortstuff
Log created at 09:14 on 09/06/2011 by debra
Administrator - Elevation successful
View 3 Replies
View Related
Jan 27, 2012
I switched my medion akoya i3 1tb (running windows 7) pc on this morning and up popped startup repair. When it had finished it gave me the option to do a system restore which I tried to do but then I got a message saying
"system restore did not complete successfully. Your computer's system files and settings were not changed.
Details: system Restore failed while deleting the following file/directory
D:windowssystem32catroot{F750E6C3-38EE-11D1-85E5-00004FC295EE}Package"
I dont know what to do as I cant get my pc to startup properly
View 1 Replies
View Related
Jan 13, 2012
Following the windows updates this wed, my pc wouldn't even start from a system restore.It was maybe heading that way as it was taking 20 minutes to boot up - despite 8 Gb RAM to help it along.I think one of the problems may be that it has never seemed top do many restore pointsd and there was only one choice for before the updates but even that didnt work. Now setting about the hours of work working out how to restore files from Livedrive.First thing I notice - can't set the time to 24 hour clock (12 hr clock irritates m,e). Despite going into setting and chhoosing the capital HH for hours it still stays as 12 hour clock.
View 6 Replies
View Related
Jan 30, 2012
My internet company removed a virus along with some of my windows files now i can run my restore disk because i cant open up windows it starts to open but wont go past the windows 7 logo so i am stuck [url]...
View 2 Replies
View Related
Feb 11, 2013
I've had prolonged problems with my computer; blue screen crashes around 5-10 times a day, everyday for past 2 years. Anyway my problem today is that finally it will not start up. I get the start repair (recommend) or start windows normally. The latter of the two just fails and restart the computer. When clicking repair it say it cannot repair automatically, I have also gone into advanced boot settings and tried safe mode which also failed and restarted the computer the same goes with trying last good configuration which also does the same. I have also tried repair disc and back up disc I have but I don't if it some I'm doing wrong but they are not loading.
View 33 Replies
View Related
Jan 13, 2012
At first it started with me downloading Cataclyst Control Center to update my graphics card wich is a X-fire ATI 5000 series. There apeared a black border around my screen of around 1 inch, but wherever I chekked the resolution showed it was my native 1920x1080, while still showing the black border.I tried de-installing CCC at that point but it didn't work, I also tried a system restore, but that didn't work either. I formatted my pc to factory defaults at that point.After a month I started using the pc again, and when playing Battlefield 3 I got an error that my graphocs card was failing or something. So this time I went to the device manager and tired updating it there, but it automaticly installed CCC again and my resolution got screwed again.I found a solution from: [Solved] 4870 not displaying 1920x1080 on Acer H233H - ATI - Graphic-Displays."I just went through this myself with an Acer P235H. The problem has nothing to do with Acer, and everything to do with ATI. You see, ATI assumes that you'll use your HDMI cable to hook up to a TV. Since most TVs are configured with overscan (i.e. the edges of the broadcasted image don't appear), ATI aggressively defaults to shrinking the image by 15% when using HDMI to ensure that the entire desktop will be visible.
The solution is to install the ATI Catalyst Control Center, available from their website. There's a section called something like "desktops & displays." On the bottom of that tab will be an area with a small icon of a monitor. Right click on that and select "Configure..." One of the tabs that shows up has a slider for display scaling. Move the slider to 0%, and voila! It was for my wife's computer. I had already promised to reduce the cable clutter by having a single thin cable for both audio and video, so not getting HDMI working would have entailed a serious loss of face."So I tried looking in the CCC, but found no such option, and then went to the website to update CCC. I got the latest version, and again found no such option. I chose to do a system restore and never again try to update my drivers for the sake of having a normal screen.When the restore was finished it automaticly restarted my pc, and I got to the password screen (with normal resolution now) and typed in my password, after that I got a blackish screen with only my mouse on it, wich I could still move.I restared my pc again then and this time I didnt even get to the password screen, it just straight out went to the blackish screen with my mouse on it after the welcome screen.
View 3 Replies
View Related
Jan 23, 2011
I recently ran into frustration trying to save or make new any files in the root C: directory, with Windows7 Home Premium being set by default, of course, to not allow this. I did a cursory skim of some information online about changing these settings, and made some changes a bit hastily. Specifically, for the C: drive I took ownership of every subdirectory and gave my account full permissions under security. Annoyingly, this didn't fix the original issue of saving to that drive (which I no longer care about anyway), and it caused (at least) two new problems. Now my start menu has far fewer listings than it used to have; I imagine some programs were listed in it based on the previous permissions. I tried to do a system recovery, both through the OS and with a recovery disc, and that does not work either. It lists restore points, but after restarting it says that the restore was unable to complete.Can I fix the permissions and ownership of just the restore directory and program components, enough to run one, and revert?Or, failing that, is there a way to undo recent ownership changes made? I poked around in the Event Viewer, but it's not laid out very clearly.It's ok if it's not possible or easy to do it this way; I can grab just my vital files and completely reinstall Windows if it's absolutely necessary, but it seems excessive. I doubt the system restore files are corrupted. More, let's say, confused.Let me know if you need any of the error message codes. Somehow they never seem useful. Screenshots forthcoming.
View 9 Replies
View Related
Jun 19, 2012
Here is an image of my desktop. The gadget size is big, the taskbar is big, the close restore minimize button size is big, how should I restore them to default size?
View 1 Replies
View Related
Apr 10, 2012
System Restore will not create a restore point or restore to a previous date & time.The error message was: A restore point could not be created: An error was detected in the Volume Shadow Copy Server (VSS).The problem occurred while trying to contact VSS writers. Verify that the Event System Sevice and the VSS service are running & check for associated errors in the event logs (0x80042318).Volume Shadow Copy is started & running (done in system events).Event System Sevice and the VSS service are started and running. But no cigar, SR still broken.
View 9 Replies
View Related
Oct 27, 2012
I have lost my user account and folders and files, music and pictures . I have tried system restore but no success.
View 8 Replies
View Related
Aug 25, 2011
My Windows 7 System Restore doesn't restore. It allows me to set them and tells me they've been done. But on the couple of occasions when I've wanted to use one, no joy. Yes I know I could possibly do it in 'Safe Mode' but that isn't an answer as to why I can't do it in regular mode?
View 2 Replies
View Related
Jul 20, 2012
I had reason to check my System Restore function today and found only 3 points to choose from. One from July 15, 2012, another from 2011 and the last from 2010. Obviously two of them are worthless. I understood that a new restore point should be added each week, or at a major change of some sort. How do I change this so that more points are added as time goes by? One each week would be just fine. I can't find this option in Win 7 as I recall was available in XP.
View 9 Replies
View Related
Jul 17, 2012
I have an old HD that I used to use for backups in a different PC setup, and though I deleted those backups when I moved on to a different HD, the backups were recoverable using Pandora and I believe intact since I never used the drive in question after that time. So specifically, I now have a folder called "Backup Set 2011-02-13 190024" that contains a 84 zipped folders worth 13.1GB that comprise that backup, and I want to restore them in some automatic fashion to see what's actually worth salvaging. (I assume this doesn't have to be done one-folder-at-a-time, drilling down through five layers of branches in the folder-tree, and almost immediately forgetting where I am...) But when I look at "Backup and Restore," I can't bring up this or any target folders - the link "Select another backup to restore files from" produces a blank set of choices, and there doesn't appear to be any way to 'load' a particular folder to restore, as I would have expected.
View 4 Replies
View Related
Jan 14, 2013
I lost 2987 emails by clicking on email tab in windows task manager All the emails disappeared so now >>??? wondering if Sysytem restore restores email as well with Win 7 are do I have to do like Ive seen ? Go to your documents folder and right click on the folder titled Mail the properties and then the previous versions tab.Click on a restore point from before it was deleted and click restore.
View 3 Replies
View Related
Apr 19, 2012
I restored my computer to 4/13/2012 and i lost all of my word adn excel documents, and pictures. All emails are there and appear to be fine.
View 3 Replies
View Related
Apr 28, 2012
I wouldn't go so far to say, I'm totally computer illiterate, but not far from it.. If there's anyone out there, who's up for a challenge I'm running windows 7. I am the administrator. Someone I don't trust at all, used my PC a while back. After he (did whatever he did) I noticed I couldn't access several files. I get a "access denied" or you don't have permission to view this file, owner info etc.. I can see a lot of the files, but their either empty now or I can't view them. I have used restore many times in the past, but now I get a message " no restore points".. I don't know what he did, or if he did anything.. It could be one of my kids changed properties by mistake, before I wised up and created a basic user acct w/ limited access for them.. I almost forgot. When I go into file properties there is a red x by my user name (administrator) Not in every property, but several.. Sometimes there is a red x by other user names, as well, but mostly mine.
View 3 Replies
View Related
Dec 7, 2012
I recently installed some updates in my Proline notebook, but after installing the 30 percent, it failed to restart, with the screen showing nothing (as if it's off). I then tried to restore it to an earlier time via safe mode but the restore point available is only the one as at the time of the update. I tried to create a restore point, but when i tried, i cannot even find system protection when i looked for it and it directs me to system properties where my computer's description is blank and it cannot be edited.Even the updates cannot be uninstalled via safe mode.Is there no other options i can try in order to start my laptop normally again?
View 10 Replies
View Related
Jun 26, 2011
So I cleaned my registry using RegSeaker and now my computer BSODs at the 'starting windows' screen, even if I try to start in safe mode. I created a backup of my old registry before cleaning and I can access it using the command prompt that you can access in the system restore options. However, when I try to update the registry with it I get an error message saying 'cannot import.
View 7 Replies
View Related
Feb 9, 2012
OK, so a couple of days ago, my HP desktop crashed and then went through the whole System Recovery loop(I couldn't login to Safe mode, wouldn't let me past the System Recovery Screen). Well I backed up the entire C drive using Backup your files in the menu. Then it shows you all the file types it will back up; i.e photos, videos, e-mails and bookmarks. So I did that to an external hard drive and it comes out to 143GB.Now comes my problem. I've been able to copy everything from the external hard drive using RecoveryMgr.exe which opens the WIM files and saves them to my C: hard drive under System Recovery Files. However it does not seem to work when it comes to putting in my old Thunderbird e-mails, contacts and such or in Firefox to restore my bookmarks, saved passwords.
View 1 Replies
View Related
Dec 28, 2011
I am trying to restore my computer because it launches into system recovery. After I get to the recovery options I tried to do system restore but it tells me there isn't enough space on the disk.
View 6 Replies
View Related
Apr 17, 2012
not A legel verison of window 7. wont to restore to factory setings.
View 1 Replies
View Related
Jan 18, 2013
I have tried a lot of things and I can't get system restore to work. I don't need to use it but I would like my computer to be working since there is no reason for this not to work. I just keep getting ComPlusStaging failed to obtain original copy from %systemroot%/registration all the time.
View 9 Replies
View Related
