Windows 7 Professional 64b.I purchased a Windows 7 installation disc in 2009 and misplaced it when I moved to Australia. Found it last week and installed it. Downloaded its sp1 and tried to install it. Failed.A message stated: ERROR_INSTALL_FAILURE (0x80070643)
I'm out of ideas. I've been running Win 7 on this machine for more than a year without issues in updating etc. Now it will not search or update/install critical items. I'm running Symantec (even tried turning the firewall off without any success). I get an error code 80072F7C. When I run hijackthis, I get an error message that my system denied write access to the Hosts file. I proceed with the scan but am unable to produce a log file. I've included a screenshot from the windows update error as well as the error I get when trying to run hijack this.
My offline files seems to work offline all the time, even when it shows me being online. I sync most of my business files to my laptop for working at home at night. When I edit a file from my Win 7 (pro, 64-bit) laptop, then go to edit it again, I get the version I had changed, but no one else does. This is causing huge difficulty, because my employees will start working in a sales forecast spreadsheet after I reconnect to the network and supposedly sync, but they don't get the latest version. Even doing a manual sync seems to make no difference.
I have a system with 32gb DDR3-2400, a 256GB SSD and a couple of spinners. I have set up 4gb of the RAM to be used as another RAMdisk using the softperfect software. This problem has been going on for some time, but has been more of a problem since I started using the RAMdisk. Not because the RAMdisk itself isn't working well, because the stuff that is stored there keeps getting reset.I have pretty much identified that when updates are installed through windows update (either from Microsoft update or from my WSUS server), the following are reset to defaults
1. Pagefile is automatically managed and stored on the C: drive and is set to 32gb
2. The TEMP and TMP environment variables are reset to the C:users default location
3. The temporary Internet Files location is reset to the default C:users... location
There may be others that I have not discovered.I have manually set my swap file to 1024/2048 on the D: drive (a spinner), on the belief that it should rarely if ever be needed with a system equipped with 32GB of RAM. I'm certainly not inclined to waste 32GB of space on my SSD for an unused object.I have placed the TMP/TEMP files, cookies and Temporary Internet files on the RAMdisk to squeeze a little extra performance out of the system. (Yes, I know, I'm not really getting much benefit).Photoshop and a few other programs also use the RAMdisk as a scratch disk, and were the main reason I set it up in the first place.This is becoming a real pain when it gets reset as I have to manually change everything again. Anyone know a way to make windows leave settings at what I set them, instead of having it continually reset the values to what it wants? I'd prefer to have it my way. I know there will be proponents of "leave things as windows wants it".
Someone told me "The corrupted registry file needs to be repaired and would require performing advanced troubleshooting steps to fix the Windows Update issue" is there anyway i can get this fixed free? The problem this causes is that when i update the brand new windows 7 i just bought and i install then restart the computer so they can take effect ( Graphics Update ) After the Starting Windows Page my screen goes into sleep mode but i hear the starting windows noise. The computer technician told me "Just 149.99$ to fix this problem in one session" which makes me think i am really getting ripped off.
Rebootedmy laptop after latest Windows 7 updates. While closing it started installing latest service pack. Next time I looked at screen it had gone to a black screen scrolling white text. Each line is 'Recovering orphaned file xxxxx into directory xxxxx' has been doinng this continuously for an hour now with 2 or 3 occasional half second pauses. Any ideas what is happening and what I should do next?
I've got a problem with a windows update that won't install.I get an error code of 57E. The update is for Office2003.I tried the troubleshooting for updates but my browser (Firefox) crashes when I try to use it. I did some research about error code 57E and the cure had to do with repair of registry.
The latest Windows update just does not install, it goes until 35% then the puter shuts down and reboots.I tried with the "Fixit" tool from Microsoft, but it doesn't help at all.I'm running Windows 7 Ultimate 64 bit?
Everytime I close the system, I get the message that windows is installing an update but it doesn't update and this has been going on for 2 months. It is a critical update so I can't delete it before I power down. I have updated all my drivers so don't know what to do next. I'm running windows 7 64 bit.
I've built a brand new PC and decided that I would like to install windows 7 64 bit on my SSD, I got a disk+key from my university before christmas so that'd i'd be ready once i'd built it.
I built the PC yesterday and realised that I'd left my external DVD drive at my university accommodation, I'm at my parents house for christmas break so that's a few weeks left. I can't really wait that long so I used my parents laptop (which I'm posting from now) to turn the disk into an .iso and use the microsoft USB utility to make a USB stick that i could install from.
However when I tried the install gets to 'installing features' and gives 'windows cannot install required files' error code 0x80070570 I looked the code up on google which sent me to a lot of threads here, so far I've tried:
Taking all but 1 stick of ram out and the graphics card. Reseting the bios to default Installing again without rebooting after error. using cmd to select the right partition
KB2644615 windows update will not install. I have attempted to install it via windows update and receive an error about encountering an unknown error. I downloaded the file from the MS Download Center and it said some updates could not be installed.
Security Update for Windows 7 for x64-based Systems (KB2479943)I cannot install the above update.. I have tried downloading directly from M$ and still no luck, the dang thing just won't install. Everytime windows update manager states that it has a failed.
my computer is stuck at 3 out of 13 when its installing the updates for windows before it shutdowns, its been stuck for 9+ hours now. i dont know how to stop/ restart the process. When i turn it off and reboot it, it goes straight to the update installing screen.
I am having difficulties with updating Windows 7 on my laptop MSI FX603. Windows 7 came loaded with the laptop, though I do not know if I have windows 7 basic, premium, pro or else.I went on vacations in July, came back in August and I had a bunch of updates. I updated everything at once but I have 8 update files that fail to install from which only 1 error fail to update occur in the update history; therefore I assume this particular error prevents other updates to install correctly.
Update for Windows 7 for x64 based systems (KB2732500) installation date: 8/29/2012 You may need to restart your computer for this update to take effect. Installation status: Failed Error details: code 80071A90 Update type: Recommended
The knowledge base has several links, I tried all of them. 1 of these knowledge base is about downloading a windows 7 little program called "fixit" but after several attempts, I concluded Fixit cannot solve my issue or is not the proper way to solve my issue.The whole updating package files is roughly around 39 megs and I wonder if Windows 7 actually download the packages every time I click on Update or if Windows stores the updates ready to be installed somewhere on my HDD in which case I would need to re-download the update but I do not know how?
System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit Processor: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz, Intel64 Family 6 Model 42 Stepping 7 Processor Count: 4 RAM: 16294 Mb Graphics Card: EVGA 550 ti sc Hard Drives: C: Total - 114470 MB, Free - 60367 MB; D: Total - 240028 MB, Free - 229143 MB; E: Total - 236906 MB, Free - 199477 MB; F: Total - 114470 MB, Free - 100953 MB; Motherboard: BIOSTAR Group, TZ68K+ Antivirus: Microsoft Security Essentials, Updated and Enabled
New computer above and my previous computer have Windows Updates for the same file with no KB number. Both computers have tried to install the update numerous times but fail. It says the file is Windows Internet Explorer 9. I get an error code 9C48 for which I find little info The new machine was put together April 11 and shows IE9 being installed on that date and I am already running IE 9.
I'm having a problem with Windows Update. It's managed to install a few updates, bust most of the updates that it automatically finds fail to install (many important ones too - security updates, etc.). A bit frustrating. For the past couple of days, it tries to install the same two updates every time I turn off the computer. The process takes about 40 minutes. Then it shuts off without an error message. Afterwards, when I turn the computer on again, it doesn't say anything but there are once more two updates that need to be installed - the same ones. It's been quite frustrating. For now, I've got the updates turned off, so it won't try to install them any more, but that's only a workaround and no solution.
I think the problem might be connected with some other installations problems. I've tried to download the updates and install them manually, but it didn't work either; first it said that my virus scanner was interfering (I disconnected from the Internet, deactivated the virus scanner, and tried it again, which got a little bit further but not all the way). At the end I got a kind of dubious error message, which I sadly haven't written down, but it was similar to the ones that I got when I tried to install Microsoft Office and also was unable to get the installation to run through to the end. In both instances, the installation was almost done, after which I got a message that there was a problem with some assembly components, and then it undid the changes. This normally took more than an hour - 30 minutes for the installation to get to the point where it started over, an hour to get it to cancel itself. Haven't found a solution there, and that sucks, because I really need it. I've got a lot of files saved in OneNote format that I can't use and need for work.
The Office error messages led me to a couple of forums where it had worked out because people had updated their .NET framework. I can't do that because .NET is part of the OS framework in Windows 7, apparently. Then I read that some other people had just used Windows Update to update their OS, and then it worked. That's what led me to the discovery that my updates weren't working. I believe that that's got something to do with the problem.I've installed some software, but there's the problem with Windows - I can't install it at all. Not sure what to do here. Windows Update lets me look at the update history. I've found that I get the error code 643 for the two updates that have repeated over the past two days again and again. For the other ones it's a little different; they tried to install once and didn't work. For those, I get following code: 80080005.
Have an HP G70-463CL that refuses to install some updates.Discovered SP 1 has not been made available or installed. Tried the manual install of SP 1 from the MS website and it fails and tells me to "Check for Update Readiness Tool" Downloaded that tool and attempted to execute it and it also fails. The readiness tool reports "Installed encountered an error: 0x8007000d, The data is invalid".The Laptop originally came with Vista and later a Win 7 x64 DVD was supplied, and was upgraded about a year ago. We noticed there was two C++ Security updates that have been trying to update everytime the PC is turned off since JUNE 2011.how I can get the readiness tool to work? If I cannot make the tool work I know I have no chance of installing 46 missing secuity updates.
I am rebuilding a workstation here and I am wonder "when" (In terms of order) do you guy run Windows Update during a bare metal reinstall of Windows 7?I currently do ALL my drivers first (and confirm all devices are working) and then move over to Windows Update. But I see some folks go to WU right after the Windows 7 installer is done and you are placed on the desktop for the first time?
I've heard many people saying you can install Windows 7 upgrade version straight onto an blank computer (just to be clear on what i'm saying, i mean a brand new computer that has never had an OS installed on it in its lifetime).
I just got a new computer, and was on the process of transferring my files from my old computer using Windows Easy Transfer. It was taking a while so I left it on overnight. When I checked on it again, it had reboot to install windows updates. Now, I've got a folder in my Users section that apparently weights 0 bytes, but that is taking up easily 100 GB, which I also cannot access; for trying to do so leaves me with the same explorer window, and unable to return using the address bar or the back arrow. Is there anything I can do about it?
i bought windows 7 ultimate 32bit because my girlfriend has a different mother languagewell i have always update , so i download and update every hotfixescan i get rid of the backups after the updates?i find that link-> Windows 7 SP1 Disk Cleanup Toolthat suggests -> Code: dism /online /cleanup-image /spsuperseded now that article talks about remove the hotfixes after the sp1i did not update sp1 , i will do soonbut now i have lots lots of backups due the many paches/hotfixes installedcan i get rid of them ?
I tried to update itunes and failed because of "Invalid signatures." I cannot only not update itunes but i cannot run any setup.exe like itunes or skype. I also cannot update my malware program or update mozilla firefox. I am looking for any insight on what could be doing this. I will try anything.
I get a message that I cannot install Windows 7 uograge to my HP laptop which is running Vista. I get a messsage that files are missing but no explanation of what files are missing.
I change date in my excel file. I drag it to an SD card for back up or put it on my network to share with my other computers. The new changes are not saved in the transfered files. I must delete the old file on the SD card or the networked computers first.
I have an HP Deskjet 1220C printer connected to my PC running Windows XP. My laptop is running Windows 7 64-bit. When I connect the printer directly to the laptop Windows Update finds and installs the driver, no problems. However, when I connect to the printer over the network, Windows Update fails to install a driver.
I've notice that Windows Update, after just installing the OS, gives you some optional updates, and those updates are the drivers for your devices, and it seems that if an update for that drivers goes out, Windows will let you know so if you want to download it you can do so. Now my question is, Is it better to go to the manufacturers website and download the latest driver manually or is it just the same to let windows search for it automatically and download them when there is an update?...
My computer was installing the latest updates for windows 7 professional 64 bit and the battery died during the shut down process, and now when I start the computer it will allow me to log in but when it hits the desktop it freezes up completely. I have tried using the system restore but somehow my restore points cant be found anywhere and when I tried using the system repair option on the installation cd it says it cant because the problem is unfixable. The error it says it has is in the boot sector and it says the error code is 0x45d, but when I ran it a second time it didn't say that. I really don't want to deal with pulling off all of my personal files and then installing a fresh copy of windows because that would be too much of a hassle, but if i have to i will.
I'm having a major virus/malware issue as my McAfee firewall protection stopped working suddenly. Called McAfee to reinstall the virus software and they were unable to install it. They said that since my Windows Update feature is not working (there is a big red X and updates are not downloading and installing) the McAfee installation is failing. Asked me to fix this issue first and then try McAfee installation.