Windows 7 Update Registry Files Needs To Be Repaired
Dec 19, 2012
Someone told me "The corrupted registry file needs to be repaired and would require performing advanced troubleshooting steps to fix the Windows Update issue" is there anyway i can get this fixed free? The problem this causes is that when i update the brand new windows 7 i just bought and i install then restart the computer so they can take effect ( Graphics Update ) After the Starting Windows Page my screen goes into sleep mode but i hear the starting windows noise. The computer technician told me "Just 149.99$ to fix this problem in one session" which makes me think i am really getting ripped off.
While windows was uploading some updates yesterday, I cleaned my registry using Iolo's system mechanic tool and that's where the problems started. (I already read and understood your message: don't use those tools and stay out of your registry. A lesson I learned too late, unfortunately.)My computer rebooted and after a couple of minutes I noticed the message: " failure configuring windows features reverting changes ". I managed to bypass this loop by running in safe mode and recover my computer to a restore point in the past. This only worked partially: I get windows to run in normal mode but I get this message: "system failed while restoring the registry from the restore point. Restore point damaged or was deleted during restore". So it didn't restore but I can get into my windows now.So I don't get the 'reverting change loop' anymore, so I can access my computer but what's the mess? Well my computer is slow as hell.Like mentioned above, I already looked around on this forum and wrote down what I already tried. [code] My computer is terrible slow because of a registry defrag/optimization of a registry tool (in combination with windows update) --> I need to find a way to get back my old registry files but system recovery ain't working.
Brand new computer, upon installing Windows 7 could not boot into windows due to missing file errors. The HDD I am trying to install onto is a SSD, I will provide system specs at the end of the post. Anyway I unplugged my secondary SATA hard drive and then I was able to install Windows 7 and boot into windows.Now after all my drivers have been installed I am recieving error messages when logging into WindowsI ran SFC.exe and the log output gave me hundreds of lines saying Cannot repair member file. Here is an example:[CODE]
my windows is not updating .. when i diagnosed it says the Following "windows update components must be repaired , problem with background intelligent transfer service(BITS) " and shows the following error code "80246008 "
I've unistalled Amd Driver from Device Manager, Unistalled Catalyst software and ran Driver Sweeper. There is only 3 registeries that the Driver Sweeper CAN'T delete and these are under SYSTEM folder. I've tried to change user privilegies but this far I've not succeeded.
Windows live mail is telling me there is a new up date. If I do download and execute it comes back with message of registry error and how to fix. In my registry the location does not exists. I have reverted to previous version. Question is in order to use the update and that phantom error should uninstall my version ? Now I am guite happy with this version, how do I stop the nag about update?
i have a vbs script to update the registry, but i need to reboot after the changes has been applied,is there a way to update the registry after the changed has been made so that i dont have to reboot?
Mounted .iso image and proceeded to do a clean install, got till the end of the installation and an error saying: "Windows could not update registry data in the installation" popped up and reverted my setup back to Windows XP.
I don't have DVD burner so I don't have the option of burning the .iso to a DVD. I tried setting up a different partition through 'Partition Magic' but was not able to.
Enable or Disable, either or and one can figure the other, but Enable or Disable Drag and Drop of Files/Folders in EXPLORER via the Registry. This is NOT about the desktop, NOT the Internet, Not the StartMenu. That should surely narrow it down i hope
I have a similar post but not for WIndows Xp but not Windows 7 and while I am told its similar for XP/7 I have not found the case..... Vista I am told is slightly different yet. But, I am looking for registry edit/tweak under a similar key such as in the HKCU or HKLM as listed (should be close):
HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionExplorer HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionExplorerAdvanc ed
Whether I was off on the timing/correation I have tried the following Keys/Subkey names: EnableDragDrop, DisableDragDrop, DragDrop, DragAndDrop....... noe of these seem to have an effect.
I toyed with these but were not any of the issue (or before): HKCUSOFTWAREMicrosoftWindowsCurrentVersionInternet Settingsones...
My problem is that while installing windows 7 the error "windows could not update registry data in the installation" keeps poping up during the "Installing updates" step, right after the "Installing feature" is completed. I downloaded the several iso from this and this webpages. Also tried USB and DVD (at 1X speed). Found great help on the SSD / HDD : Optimize for Windows Reinstallation and Clean Install Windows 7 guides, I follow them every time I try an installation. But doesn't matter what I do the error "windows could not update registry data in the installation" keeps poping up.Since I have to keep using the laptop for work I installed Ubuntu 12.10 to finish some projects (worked fine for over a month, no problems) but now I have some days off and I want to fix this. Other things I have tried that didn't worked
*Using only 1 Ram slot *Make sure that the HDD is first in boot priority *Install Win XP *Iso without ei.cfg
I'm running a Dell XPS Studio 15 L502x laptop, so no RAID.
I put my copy of Windows 7 on a USB drive drive to install on my netbook and it gets all the way to the "installing updates" part when it says "Windows cannot update the registry" and the installation quits and rolls back the half-completed install.
I even press "do not update" at the very beginning when it asks if I want to install updates or not before the install.
I'm trying to install on a new partition from my current partition with Windows 7 starter because it doesn't appear that the netbook (Toshiba NB205-N230) has a USB boot option.
I recently had a Gateway LX6810 repaired. The system board, NVidia card and power supply were replaced. It is a 64bit machine. I downloaded a new version of Windows 7 from Microsoft to another PC, then copied each of the 3 files to CD. The Gateway does go through the normal boot process and the drive priority is DVD as first boot. When The drive spins all I get is the white cursor in the upper left corner.
I don't know the best place to post this so please advise me if its in the wrong place. I ran an analysis on my laptop for defrag using auslogics as I haven't done one in a year and it also told me that I had junk files and registry errors etc that I needed to get rid of before defragging. I've run Ccleaner, Glary utilities and advanced systemcare free and it still tells me there are files/errors to get rid of. I don't really want to buy a program atm just to get rid of these if theres a perfectly good free program I can use - does anyone know of anything else other than the ones mentioned that will clear this up? Is it essential that I do
I got a new laptop but it has windows 7. 1 of the extremely huge problems this operating system has is this absurd thing where you cant arrange your own files in the order that you want.Im not gna waste my time ranting on here as it wont make any difference, but it does astound me that microsoft would employ such thickos who were unable to create an OS that was capable of offering such a basic function! i followed the (this) registry-edit steps lastnight to enable free-positioning of my files (unawave. de/windows-7-tipps/disable-sorting-auto-arrange.html?lang=EN).I did it lastnight and it worked perfectly!I then turned my laptop off as it needed to install its daily updates, but when i restarted it i can no longer move my files around in my pictures/videos/or my music folders!Photo/video files in other folders can still be moved around freely, however as all my pictures and videos are saved by default into those 2 folders this causes me a huge problem!
My offline files seems to work offline all the time, even when it shows me being online. I sync most of my business files to my laptop for working at home at night. When I edit a file from my Win 7 (pro, 64-bit) laptop, then go to edit it again, I get the version I had changed, but no one else does. This is causing huge difficulty, because my employees will start working in a sales forecast spreadsheet after I reconnect to the network and supposedly sync, but they don't get the latest version. Even doing a manual sync seems to make no difference.
I have a system with 32gb DDR3-2400, a 256GB SSD and a couple of spinners. I have set up 4gb of the RAM to be used as another RAMdisk using the softperfect software. This problem has been going on for some time, but has been more of a problem since I started using the RAMdisk. Not because the RAMdisk itself isn't working well, because the stuff that is stored there keeps getting reset.I have pretty much identified that when updates are installed through windows update (either from Microsoft update or from my WSUS server), the following are reset to defaults
1. Pagefile is automatically managed and stored on the C: drive and is set to 32gb
2. The TEMP and TMP environment variables are reset to the C:users default location
3. The temporary Internet Files location is reset to the default C:users... location
There may be others that I have not discovered.I have manually set my swap file to 1024/2048 on the D: drive (a spinner), on the belief that it should rarely if ever be needed with a system equipped with 32GB of RAM. I'm certainly not inclined to waste 32GB of space on my SSD for an unused object.I have placed the TMP/TEMP files, cookies and Temporary Internet files on the RAMdisk to squeeze a little extra performance out of the system. (Yes, I know, I'm not really getting much benefit).Photoshop and a few other programs also use the RAMdisk as a scratch disk, and were the main reason I set it up in the first place.This is becoming a real pain when it gets reset as I have to manually change everything again. Anyone know a way to make windows leave settings at what I set them, instead of having it continually reset the values to what it wants? I'd prefer to have it my way. I know there will be proponents of "leave things as windows wants it".
Gets be busy, as with many tabs, two browsers, and several other programs running, when the monitor would go black. Not gray, but black as if it had no power. It would last usually around 15 seconds, occasionally till I did a cold boot. When it came back from a 15 second episode, sometimes colors were strange and or parts of the screen remained black. It acted like my ancient '98 had when out of resources. But that was rare --usually it just came back and we kept going. I contacted HP and they tried some diagnostics (as in, they controlled my cursor), with no trouble apparent. The told me I'd have to mail it to them. Knowing they usually format the hard-drive, and seeing this as a lot of trouble, I insisted they send a tech.
I want to select "Never check for updates (not recommended)" as a default settings for all users and only an administrator can change the option.Is there a registry key to do this?I am building an image so it has to be done in the back ground..
I've just gotten my pc back after basicly everything got replaced, due to being in a building where there was a fire. Since it came back, I've started to have BSOD issues, which pop up randomly while playing games or doing other things. I already ran a Memtest overnight. It ran for 10 hours and came out with 0 errors.I've tried to attach everything stated in the Post New Thread-thread. If I missed anything, please let me know.
I was booting off an ssd originally and have a regular hdd as backup. then i had to get my laptop repaired. i removed the ssd and shipped the laptop off. upon receiving it, i popped my hard drive back in and changed the boot settings in bios to my ssd instead of the hdd.it boots just fine, but my wallpaper was gone and i cant access certain things like my computer, control panel, etc. an error pops up saying that it wont initialize.is there a procedure i must do? i tried sfc scannow and it restored my desktop, but it said somethings were unable to be repaired. im also wondering how come it didnt just work right away as if i never sent it in for repairs. i stumbled upon a guide that said how to re register my dlls.
Windows 7 Professional 64b.I purchased a Windows 7 installation disc in 2009 and misplaced it when I moved to Australia. Found it last week and installed it. Downloaded its sp1 and tried to install it. Failed.A message stated: ERROR_INSTALL_FAILURE (0x80070643)
I recently bought a dell latitude E6410 laptop running windows 7 ultimate. A few days ago it started playing up, at first I thought I had a virus of some sort as my protection had run out, so I downloaded another protection plan and ran a test which came back clean. Then a message came up up from windows saying that I needed to install a "P2P driver" and do a upgrade. So I downloaded the driver and did the upgrade which seemed to work. The next day I started up and it went straight to the start up repair, which came back saying my system cant be repaired automatically. I can get as far as the system recovery options. I tried a "system restore" and that didn't work, and a "windows memory diagnostic" and still nothing. I haven't done a back up disc or have any other discs so I'm pretty much stuck in a loop now. I've been looking into the "system image recovery" but have no idea what that means or what to do.
Rebootedmy laptop after latest Windows 7 updates. While closing it started installing latest service pack. Next time I looked at screen it had gone to a black screen scrolling white text. Each line is 'Recovering orphaned file xxxxx into directory xxxxx' has been doinng this continuously for an hour now with 2 or 3 occasional half second pauses. Any ideas what is happening and what I should do next?
My computer got the BootMGR is missing problem, which I have had in the past which is not that big. I insert the Windows 7 64 Ultimate disk it starts up everything fine, press repair my computer and it finds the installation. But when I press on it and next it has an error pop up saying "This version of system recovery options is not conpattble with the version of windows you are trying to repair. Try using a recovery disc that i compatible with this version of Windows." If I dont select anything but press next it allows me to look at the screen Im supposed to, but if I go to command prompt or click autmatically repair nothing will be saved or changed. This is the same disc I installed Windows with and repaired it several times. But I did have to reset BIOS earlier so this may have affected something.
i bought windows 7 ultimate 32bit because my girlfriend has a different mother languagewell i have always update , so i download and update every hotfixescan i get rid of the backups after the updates?i find that link-> Windows 7 SP1 Disk Cleanup Toolthat suggests -> Code: dism /online /cleanup-image /spsuperseded now that article talks about remove the hotfixes after the sp1i did not update sp1 , i will do soonbut now i have lots lots of backups due the many paches/hotfixes installedcan i get rid of them ?
I tried to update itunes and failed because of "Invalid signatures." I cannot only not update itunes but i cannot run any setup.exe like itunes or skype. I also cannot update my malware program or update mozilla firefox. I am looking for any insight on what could be doing this. I will try anything.
