Windows 7 Always Go Into Automatic Repair Mode On Start Up
Jan 4, 2011
On my PC with gigabyte motherboard, quad core processor, 4gb ram 32 bit Windows 7 when I start up it goes into the windows 7 automatic repair mode. After running it's tests I'm told microsoft cannot fix this do I want to send the information to MS - (with no internet). I've tried inserting the program cd but no restore points are found and no repair can be completed. Nor are there any backups. Is there a way to run the install -I have an OEM version- as a repair so I don't lose any data?
Have an Advent laptop here, BSODing when booting with the error message above.Cannot run in safe mode and any start up repair attempts have failed.I have run disk checks both in the Windows start up tool and in Linux and they both say no problems but when I try a system restore it says there is one. Here is the .dmp file and the laptops specs.I also ran sfc /scannow but everytime I do I get a message saying there is a repari waiting for me to restart the laptop and that's all I ever get.[code]
i just crashed som1 64 bit lennovo laptop while i opperate a 32 bit pc dont have any windows system with me,it wont start on safe mode,and system repair has failed many times.the laptop was running on low battry and it shut itself,when i tryed to reboot it,it automaticly went to system repair which failed
My Windows 7 desktop will not enter automatic or manual sleep. In both cases the computer does an "unsuccessful shutdown". I have to cycle power to reboot the computer. Restart and Shutdown work normally. I have enabled automatic sleep with both Power Options, powercfg, and BIOS.
Powercfg -energy reports no unusual errors rather than the usual USB devices not entering suspend state. I believe I have performed most of the steps outlined in the tutorial by Brink in the Vista forum "How to Troubleshoot a Vista or Windows 7 Sleep Mode Problem".
Lately my welcome screen became very slow, it takes 3-4 minutes to load and then a black screen with a mouse cursor comes up for 30 seconds then the actual windows come, when windows start the network icon has a red cross on it and says not connected - no connections available but the internet is just fine, and it says failed to load windows service. Is that a virus? i scanned with AVG 2012 and Malware bytes and problem is still there .
when I go to safe mode and hit repair computer they say I have to use a dvd and hit repair. my dvd does not have repair on it I have trouble with startup I do not know how to use the dvd if it has no repair listed
Last night I was on my computer and then I shut it down. Today when I came home from work it keeps saying windows failed to start. I tried hitting f8 and loading to the last good configuration doesn't work, safe mode same thing, repairing nothing, so my last resort was my windows 7 cd. So I went into bios and made my configuration boot from cd/dvd popped it in and restarted, a black screen came up saying windows is loading files, then the windows 7 menu came up, picked my language, next, and first I tried repair my computer, I get the little circle meaning its loading for like 5 seconds them it does nothing, rebooted again but this time I chose, install and I've been on the setup is starting for like 20 min. And forgot to mention, when it boots seem like it does good then comes to the screen where it says windows failed and gives me two options repair our start normal, if I pick repair it just reboots and start normal takes me to like the pick your user screen but its just blank no users, so I can't even restore our access the computer.
My dell n5030 laptop isnt getting past the windows start up screen. It boots up fine up to the part where the four balls become the windows logo, but then freezes there everytime. When i try to select the windows start up repair it blacks out the screen and I cant do anything.
I know its not a faulty hard drive because its newly fitted and this problem occured previously on a different hard drive aswell.
i cant start my laptop in normal mode. when i start in normal ,mode i stuck in black screen only the mouse pointer is appear, when i wait it reboot again but still i get stuck in black screen
I'm talking about search function by using windows explorer's search box.By default search in windows explorer begins as you type - it doesn't wait you to finish typing. I hate that and I want to begin search only when I want that (when finished typing the whole string) - by pushing search lens button on the right for example.
I am using acer laptop,intel Pentium processor,windows7 professional os,my problem is windows is not starting normally and is running safe-mode.when entering normal mode it is displaying "welcome" after entering password "Please wait",it takes a long time to starting window and i'm waiting more than 24 hours but its not starting window normally...but it starting safe mode.
I have a Laptop HP pavilion Dv4 my graphics card is AMD M880G with ATI Mobility Radeon HD 4200, my processor is AMD Turion(tm) II dual core mobile M500. The thing is i was playing Tropico 4 and i paused it then it began to mix pixels i couldn't see nothing, then i restarted and this is what happens:I cant see nothing, all is mixed up. on safe mode runs well.I played driver san francisco, fallout new vegas before and any of this happened.
i bought my hp pavilion dv6 laptop in 2010 and the warranty went out on 2011, i turn on my laptop and i only get the quick web. Every time i try to start window it tells me it cant. i can not even get on safe mode. it asks me to repair my computer but every time i click on that i get a blank blue screen (baby blue color). i have tried to go on safe mode it wont let me, i tried to go on safe mode command prompt and it still wont let me,
I have an error that system32/hall.DLL is missing so I put in my windows 7 DVD ( I Have 4 DVDs for my windows, gateway, I always put the first one) so I could start start-up repair but when the windows files is loaded it keeps starting recovery mangment which gives me options to recover my hard drive to factory defaults (ie delete files on c and reinstall windows) ,why I don't get options to choose startup repair, how can I get it to start start-up repair?
My dell inspiron n5110 is having issues starting up!I was using the computer when all of a sudden it turned off and restarted itself. as it turned on a window popped up named "windows error recovery" with in that it says "windows failed to start. a recent hardware or software change might be the cause.IF windows files have been damaged or configured incorrectly, startup repair can help diagnose and fix the problem. if power was interrupted during startup, choose stat windows normally." The two options i have are launch startup repair or start windows normally. if i do start windows normally it restarts and goes back to this screen. when i did launch startup repair it did its thing and once it was done it said "Startup repair cannot repair this computer automatically"then i clicked on show problem details and this is exactly what it saysProblem signaturei
[code]...
tried doing a system restore but it got an error. Once that happend i went and tried doing a dell datasafe restore to factory settings from a image file. once it was finished a restart button popped up. once i restarted it the computer still said windows failed to start and it took me to the startup repair option again.Please help me out, this computer is not even a week old. i can't bare tell my mother it already isn't working!edit before i did the dell datasafe factory restore when i would enter the system recovery options it would ask for my user name and password that i had on the computer now that i did the dell datasafe restore it automatically puts "administrator" as the username and nothing as the password and it lets me go to the recovery options. so this makes me believe that it was successful in being restored to factory settings, yet i still have this problem?edit edit- i forgot to mention there is a blue screen that pops up real quick before it restarts and gives the two options. there was a stop code on that screen
My pc, which is running Windows 7, is continuously booting to repair mode and 9 times out of 10 just boots to a black screen with mouse cursor at which point I have no option but to do an illegal shutdown. I have tried to run a system restore but an error message 'an unspecified error occurred during system restore (0x80070002)' keeps popping up. On the occasion it gets through to the desktop it says that it was successful. Next time I shut down and go to reboot I have the same problems. Also when I go to the internet the homepage has defaulted [URL] which looks similar to google but without the banner.
I dont think this is malware but possibly a critical windows update that has corrupted. If I get to desktop and then shutdown there are 11 updates that are downloading but on reboot the you can see that the updates are loading properly. The only thing I have changed recently is I have updated the printer drivers. For no reason, all of a sudden the other day the printer stopped working and once I updated drivers it was fine. This pc has worked fine for months until the latest set of updates came through. On further reading it looks like searchnu is malware. Could updating a driver really have installed this.
Problem: This morning I had a brief 1 second power outage while I was using my computer which forced it to shutdown. It just stood there shutting down for about 15 minutes when i decided to click force shutdown. After restarting, computer ran checkdisk and startuip repair because windows was not loading.
Issues; I ran chkdsk a couple times, lots of bad sectors./index files repairing recovering, but it ends up hanging at stage 4 at a certain spot. I left it running at that spot for over 5 hours and just stood there(I went to sleep and woke up at same spot). I booted with windows 7 cd and tried startup repair, the first 3 times it said it couldnt repair. It only showed 2 restore points available and both gave error messages saying they couldnt load. I ran a checkdsk /r again and was fixing a lot of stuff and hung at same spot again. Tried another startup repair, this time it said it worked but still the same problem, windows isnt loading. However, I am able to get to the login screen now after waiting about 10 minutes at the windows logo however my kieyboard/mouse functionaility seems to be gone so i cant even type my password to login at that point. I ran a diagnostic in the boot menu, when checking the harddrive it gave me an error. Ive tried booting to every option available, safe mode, safe mode with networking, safe mode with command prompt etc, nothing works. It brings me to logon screen after a long time but keyboard./mouse dont work at that point. Now, like i said i dont want to reformat my computer and lose all my files. My keyboard/mouse work with the windows 7 bootup cd doing those menus but not when it gets to logon screen booting the normal way. I was thinking of buying an external drive and installing windows on there and booting from there but im not sure if my computer would recognize it since it wont recognize my keyboard and mouse at login screen.
I have a Toshiba Satellite that started freezing up after some windows updates. It would run fine in safe mode but now it gets stuck on the windows startup screen. If I choose startup repair it just keeps searching. I had tried to restore when in safe mode but the computer old me it. Could not find restore point. I have been trying to backup files that I needed before doing a factory restore but now I am lost...
K I have a serious issue right now.. I just put in a new mobo and cpu into my pc...My pc was running oem windows before the upgrade now i cant start windows up nor do startup repair... (im on my laptop) so my main concern is how am i going to get my pc up and running with little to no pain.
Having a problem with my laptop, was originally a vista machine but purchased windows 7 and installed as a fresh copy. All installed ok but when i do the windows updates and system restarts, it always goes into start up repair mode and fails.the error in the log says mpfilter.sys is corrupt.I did run the pc for a couple of months without doing any updates and it was fine, as soon as updates were installed it no longer worked.
Earlier today I tripped over a headphone cord and it flung my computer off my desk. I have an HP omni PC. It's the kind that had the computer and the monitor built together. I picked it back up off the floor. The power cord came out on impact. I set everything back up and was relived to hear it turn on. I selected start windows normally (win 7 64 bit) and it sat at starting windows forever. I eventually manually shutdown the computer. I powered back on and I got an option to start windows normally or use startup repair.
I thought it would be a good idea to go into startup repair. It just sat at the light blue screen with the large white mouse sitting there. Nothing happened. Nothing appeared on screen. I turned off the computer again and am just leaving it there for now. I am worried that the hard drive may have been disconnected from the fall and that's why windows won't start. Or maybe the hard drive was damaged. I tried doing a safe mode boot but it redirected me to startup repair.
When I recently tried to boot up my system all I could get is a blank screen. Tried to boot up using Windows 7 repair disk but it goes into a loop at the "starting windows" screen consequently won't boot up for me.
i Have a PC with i7 Processor running Windows 7 Ultimate and one fine day a blue Screen dropped saying a lot of things like Windows has Crashed, Dumping Physical memory, And It isn't working since then , It says Start up repair Can't fix this Computer,Details:[CODE]
Last night before I went to bed there was a Windows update, and this morning when I turned the pc on, it just went to this screen saying that something was wrong and i needed to repair. I clicked the repair box, but it didn't wanna do that. So I went into the system recovery tool to go back to (the only restore point) which is yesterday, but when I try and do that, it says "Details: An unspecified error occurred during System Restore. (0x80070002)
I don't know alot about computers, and I'm currently writing this on my laptop, since I can't enter my computer in any way
I changed explorer.dll in Windows 7. Then explorer wouldn't start when I tried to do so from task manager. So I tried to reboot. After also being unable to make headway in safe mode (using msconfig), as that also requires explorer, I launched startup repair using my windows 7 CD. Then after it said that it would reboot and fix any additional problems, it has kept rebooting and failing. I can't get to safe mode using f8 either, it just comes up with boot options 'Boot from CD' and 'Boot from HDD'.f I can get out of startup repair, that would be tremendous. At least then I can activate word from task manager and save my coursework!'m going to try using Ubuntu's explorer to change the files back. I'll post back any progress! I'll be checking this wall at least 5 times a day until a solution is found.
sony vaio PCG-71314L on turning on, hangs at "windows is starting" for ever F10 says "disc read error" F8 says "no operating system found" booting/repairing/reinstalling from CD hangs at "windows is loading" for ever
how could i get it to boot/repaired/reinstalled?losing all data on HDD is fine, just need to make it work again.
I have Dell Inspiron 1545,when I start laptop it says windows is loading,it takes sometime and runs start up repair, which fails to fix problem automatically and shutdowns the machine.It's windows 7 home basic 64 bit.I don't get complete system recovery option other than start up repair option.When I go for advanced boot up option - F8, all options comes but whatever option I take whether computer repair,safe mode,safe mode with networking,safe mode command prompt,restore to last known good configuration,it does the same thing loading windows and then run startup repair.In logs I see courrpted registry error message.I did diagnostic test, it passes all test, I have windows 7 professional iso DVD burned which I am using to boot, since my installation disc came with laptop is not working at all.I don't have iso for windows 7 home basic.
I want to do a start up repair but only have a upgrade disk. When I try to do the start up repair and pick the OS on the hard drive it comes up with a error saying the os is not compatible even tho the upgrade was done from this disk. Can I do a start up repair or clean install without losing any software or personal files?This computer has no back up's.My reason for wanting to do a start up repair is yesterday when I woke up my computer from sleep mode the hard drive kept and is always accessing but the CPU was not really doing much so I had to wait and wait and waitIt will say a software is not responding then after a long wait time the file will open or a program will respond.To just open folder takes 5 min, open files 5+. re starting or starting from the off position takes about 15 min
After window installed some new updates my dell laptop was not able to start. It will boot and go in the screen for Window failed to start. "A recent hardware or software change might be the cause. Launch Startup Repair or Start Window Normally." I tired both options but eventually leads back to this page. Then i tried to enter all the safe mode with no luck. I then tried "Last Know Good Configuration" but with no hope leading back to the same screen.
