Mpfiltersys Corrupt File Takes Windows To Bad Repair Mode
Oct 12, 2012
Having a problem with my laptop, was originally a vista machine but purchased windows 7 and installed as a fresh copy. All installed ok but when i do the windows updates and system restarts, it always goes into start up repair mode and fails.the error in the log says mpfilter.sys is corrupt.I did run the pc for a couple of months without doing any updates and it was fine, as soon as updates were installed it no longer worked.
View 3 Replies
ADVERTISEMENT
Apr 7, 2010
"windows 7 setup.exe corrupt file the file or directory is corrupt"I'm trying to install 7 32bit OEM Home Premium with the legit bought holographic CD (not a burned image of any kind) onto a Gateway laptop with a brand new hard drive.I was getting this error installing the OS the regular way booting to the cd and installing from it, so instead I copied the contents of the cd to a freshly quick formatted NTFS partition on the new laptop hard drive, then used bootsect and diskpart to setup the disk. It boots just fine and also gets the same error installing straight from the hard drive.
View 9 Replies
View Related
Jun 14, 2010
I've just built my own computer with a friend and we installed windows 7 and it worked fine for 3 days. Then it started to not respond. Restarted the computer and it wouldn't start up again, came up with a bunch of errors. So I reformatted and it says "windowssystem32driverwdf0100.sdf is corrupt or missing." I've tried system repair but it won't work. It won't open command prompt or anything.
View 3 Replies
View Related
Nov 26, 2012
It's my daughter's computer. A little e-Machine, 250G HD, Windows 7 32-bit on it. Out of nowhere her computer wouldn't boot up. I can get it to try to boot using the Windows disk, it gets so far, and then the repair fails saying:
The file or directory C:/Boot is corrupt and unreadable. Please run chkdsk utility.
I try to re-install. she had backed up everything on my external just days before. It gets near the end, and then the same error comes up. I cannot get into anything else. Nothing else will load. I don't even know how I can run chkdsk. Unfortunately the computer is about three years old and she can't remember the specifics except there is only one HD in it. She had no internet at her place so it's not because she suddenly installed something. She was using it to watch movies and listen to music mostly. I'm at wits' end, can't figure it out.
View 1 Replies
View Related
Feb 20, 2012
I have run sfc/scannow in win 7, and have followed instructions to run sfc at boot in command prompt, but nothing has solved the errors. i have saved the file sfcdetails.txt to desktop, and have extracted only the problematic parts and saved it in another file problems.txt kindly check the file, as i have attached it here.
all the files are either .inf or with .nlp extensions.windows is running fine. but i want to get rid of the problems before they become a serious issue. I have a pre-installed OEM version of win 7 basic SP 1, and i have a HP G6-1117TX laptop. There is a drive named "System", which is the active and boot-able partition, and is not the same drive where windows is installed.
View 5 Replies
View Related
Aug 8, 2010
I recently took my pc in for repair of the raid drive. The service center used a software which allowed them to change my password, so that they could access the pc. however I believe it damaged my profile because now, I can not change the password from password and outlook no longer remembers any of my email passwords, I must reenter them all each time I run outlook. I am trying to avoid creating a new profile.I am running Windows 7 Professional 64x with a mirrored 2TB drive. Simple peer to peer workgroup
View 6 Replies
View Related
Dec 2, 2012
when I go to safe mode and hit repair computer they say I have to use a dvd and hit repair. my dvd does not have repair on it I have trouble with startup I do not know how to use the dvd if it has no repair listed
View 9 Replies
View Related
Aug 6, 2011
I started the StartUp Repair again and it has this error: Code: Root cause found:
Boot manager is missing or corrupt.
Repair action: File repair.
Result: Failed. Error code = 0x15
time taken = 0 ms
What does this mean?
View 2 Replies
View Related
Aug 19, 2012
charger wire has loose wiring showing and if the black wire touches the red wire the computer completely shuts off, and when you turn it back on you have to go through the whole re-start process and lose unsaved documents. Plus when you run it in the normal mode it takes forever to load anything, and a little window keeps popping up saying "microsoft windows is not responding." but when I run it in safe mode, it works fine. what's wrong here?My theory is that the charget has been short cerciting (i know i spelled it wrong, forgive me) so much that it's been causing damage to the motherboard,
View 2 Replies
View Related
Sep 5, 2012
My sister asked me to install her windows 7 after formating (I did this before, on my laptop and others PC's) this time I met a problem. After selecting partition place for installing, on step 2 - Installing Windows at 7-8% of Expanding files I recive this error : Windows cannot install required files error 0x80070570The file may be corrupt or missing.. Make sure all files required for installation are available and restart installation.The DVD is in good conditio
View 1 Replies
View Related
Aug 19, 2012
I just installed windows 7 on my pc and when I am trying to install firefox aurora or firefox latest versions its showing error "File is corrupt". I used these software in previous version and when I am trying to changing its compatibility. There isn't any option for "Windows 7" compatibility mode. I tried many tips but not successful ...
View 1 Replies
View Related
Aug 30, 2010
I am running OS Windows 7 Pro 64bit in my PC. I keep on having a corrupt file whenever I extract RAR files especially larger files. Almost all larger RAR (more than 3GB) will have this problem. So far smaller RAR I have no issue. I have tried extracting the same under different PC (OS Win XP) but without any issue. Which I believe not the RAR files been corrupted by itself. The corrupt files seems to be random.. Sometimes, I manage successful extraction, but sometimes I don't. I have the same problems even after clean installation. I have run memtest without any error. I am using 6gb ram
View 4 Replies
View Related
Sep 2, 2011
1. Same computer in my signature/specs except for the optical drive.
2. Hardware passes Windows 7 compatibility test.
3. The install DVD can be read properly. Creating an ISO image of it works perfectly. No read errors on the disk itself.
4. The optical drive is practically brand new, the cable is brand new, never had any I/O errors using this drive.
5. RAM passes MS memory testing 6 times. 0 errors.
6. Windows 7 Ultimate install fails at the same point, during file unpacking, 3 times. Says files are missing or corrupt.
The install disk was created at home from an ISO download, student licensed Windows 7 Ultimate, 32 bit but I don't think that really matters. See #3.Is there anything else left to look at? Any ideas why this won't work?
View 1 Replies
View Related
Feb 15, 2012
when i turn on my acer laptop all it does is show a error massage saying windows could not start because bootvill.dll file is missing or corrupt. i dont have a cd-rom because it a notebook. i downloaded a regeristy cleaner to a flash drive but when i put it in the pc still goes to that error massage i also change the boot order to start from my flash drive but it still when back to the error screen . i used the alt + f10 that gotten me into the system restore it when half way done than whent back to the error screen anything else i can try?
View 1 Replies
View Related
Feb 3, 2013
I've been having some frustrating issues with Windows Explorer (on Windows 7), and I've pinpointed the cause to one stubborn wmv file on my external hard drive.Whenever Explorer accesses the location of this wmv file (unfortunately the root directory), the green bar at the top starts slowly running, presumably trying to load the thumbnail of that wmv file. This wreaks havoc everywhere, as any other folders I navigate to then have missing thumbnails that will not load... and when I go to "Computer", it's completely empty and the green bar atop runs indefinitely, but never makes any progress... only heating my computer frustratingly.Furthermore, when I restart explorer, the error "the remove procedure call failed" shows. Logging off or pressing Ctrl+N in explorer have provided temporary solutions so far.
View 1 Replies
View Related
Jan 26, 2012
Just got all the parts yesterday, put i all together today, all is running fine.Just in case i'll post the components:
Gigabyte 990fx-ud3
Amd fx-8120
Gigabyte hd8950 OC
HyperX 2x4GB 1600Mhz
So i bought Windows 7 Home Premium from the same store i got this at (Webhallen, pretty much swedens largest component retailer) to replace the standard Home edition (which i got with my "old" packard bell!).
I have 2 HDDs, one from the packard bell (1tb) and one i recieved from a friend, a 320gb seagate. I ran with both in my packard bell for a while, using the 320gb for the system. It ran without any problems.So, i boot the CD, go through the setup and format the 320GB. (I also formatted some reserved space for OEM files from the Packard bell harddrive since i won't be using the packard bell any time soon).I proceed with the installation.The copying of the files goes very quick and when it reaches the expanding of files it takes ages before it finally comes to the error:Windows cannot install required files. The file may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070017.Immedieatly i whipped up the laptop and googled it, trying the different "sollutions" to no avail, like simply trying to install again without rebooting, taking out a RAM stick and only running with one in the master slot, taking out all excess Harddrives etc etc. i also ran Memtest86, clean, no errors!
I tried install Ubuntu on it, but that didn't go well either. It loaded for ages and then i got a very strange horizontal black and white striped screen, the black stripes being jagged and pixelated.I found my old windows 7 home cd from my packard bell and tried installing with that one. Same result, Error code: 0x80070017.
View 9 Replies
View Related
Nov 22, 2011
I am using Windows 7 Home premium 64bit(genuine) on 2.30 dual core CPU with 3 GB. I reinstalled windows and a month after the reinstall, whenever I right click on only any file to open/cut/copy/rename/delete, it takes too much time, and many times the folder in which file exist goes unresponding. I am using AVAST (after using 60 day trial of Norton) and it is updated regularly.
View 8 Replies
View Related
Sep 29, 2010
having problem with file sharing in windows 7.when i tried to share some of my folders to home network, it takes too long to finish file sharing. (right click file sharing>add user>share).
View 9 Replies
View Related
Jan 21, 2012
installing Windows 7 on a virtual machine.I have 178MB RAM (which I know isn't enough), but it does the Starting Windows screen before the installation, but then it comes up with this error: File: windowssystem32configsystem Status: 0xc0000001 Info: Windows failed to load because the system registry file is missing, or corrupt.
I have no other OS on the virtual machine.
View 2 Replies
View Related
Aug 6, 2011
I have a PC with windows vista installed. I recently bought windows 7 home premium and installed a fresh copy of it. Every time I download some software like Chrome, VLC, iTunes , it downloads fine, but when it has to install it gives strange errors. I have seen all kinds of errors.
E.g.: VLC gives NSIS error.
Microsoft Security Essentials gives "File Corrupt Error".
Got certificate invalid error for some other software. if I download zip files, they fail with CRC check.
Just to be sure it wasn't hardware issue, I installed vista as a second OS and that works fine. I am really uncertain what is causing the issue (seems network related though). I had an old router and just purchased a new linksys router. Other configurations are: Core 2 Quad, EVGA SLI ready motherboard, 4GB DDR2 ram, ASUS EN210 gphx card.
View 4 Replies
View Related
Jan 4, 2011
On my PC with gigabyte motherboard, quad core processor, 4gb ram 32 bit Windows 7 when I start up it goes into the windows 7 automatic repair mode. After running it's tests I'm told microsoft cannot fix this do I want to send the information to MS - (with no internet). I've tried inserting the program cd but no restore points are found and no repair can be completed. Nor are there any backups. Is there a way to run the install -I have an OEM version- as a repair so I don't lose any data?
View 4 Replies
View Related
Jun 13, 2012
My computer crashed and then crashed again during the restart. Windows tried the start-up repair, did its self diagnosis and said I have a corrupt ntfs.sys file.How do I fix this? I have looked on the Win7 installation disk but did not find any drivers.
View 1 Replies
View Related
May 16, 2012
For what ever reason, I have a file on my 1TB WDC drive:
D:usersuser_namedocumentsxxxxx.pdf
that upon trying to open it, I receive a message that the file is corrupt.I have looked high and low trying to find a way to DELETE this file, but to no avail. There's lot of references about running CHKDSK to check the drive, running FSUTIL to query the dirty bit (which is set on this drive, because of this file), and using CHKDSK to clear the dirty-bit. And, I tried them all. This, however, is NOT a hard drive issue. The drive is fine. It's the file structure that is in error. I just need a solution that will let me DELETE the file. I don't want recover it.
1. Use Paragon-Software Hard Disk Manager 12 to copy the hard drive to another drive. The second drive is large enough to hold all the data from the larger drive.
2. Check the file on the drive copy... (yep, it's there... yep, it's corrupt... yep, the dirty-bit is on)
3. Create a filter in Paragon-Software HDM12 for that specific file.
4. Run the disk copy again using the filter.
5. Check the file on the drive copy... (this time the file is not there and the dirty bit is not set)
Having done this, I think I'm ready to copy the hard drive back. I just haven't pulled the trigger. I want to recable the drives to use the copy just to make sure I can reach everything. Then, I'll pull the trigger.
View 6 Replies
View Related
Apr 21, 2011
I have a brand new computer running Windows Home Premium 7, 64 bit. My mouse will not behave. As an example, when I left click nothing happens and I must right click and then select 'open' or 'open link' from a pull down menu. I think something must be corrupted but I don't know how to fix it.
View 3 Replies
View Related
Nov 13, 2009
I have Vista Home Premium 64 Bit and Windows 7 64 Bit. As you see I am dual booting. I had Vista installed first.I installed Win 7 later.Everything was fine.
I installed cuipid a program that monitors,memory,CPU,etc. on Win 7. I used the PC aftyer that for a couple of hours.I shut doem,the next day I booted up went in to Windows 7(set as Default). It was fine.I resarted and arrowed to Vista to boot into Vista.
I got a Black sctreen saying: Windows failed to start. Hardware or software change may be the problem. I went into 7 and restored the system back to before I installed Cuipid,No Luck.
The screen that comes up when I try to boot into Vista says:
1 Insert windows Disk and restart.
2.Choose your choose your language and click next.
3. Click repair your PC./
I tried a repair on Vista and &.
On the page I also get error: File/windows/system/32/Winload exe.
Status: Qxc000000F
then selected entry could not be loaded because the application is missing or corrupt.
I know there is a way to restore the Boot manager from Cmd??
I would appreciate it if anyone could advise me how to restore the Boot Sector.
I have 2 hard drives both partitioned.
C: and D:
E: and F:
View 1 Replies
View Related
Jul 11, 2011
how to delete..
View 5 Replies
View Related
Jan 10, 2012
I have several corrupt files and cannot delete them
View 4 Replies
View Related
Oct 2, 2012
i have this corrupt file on my computer, my OS is windows 7 and no matter what i seem to do the file wont delete. This file is like a ghost, its not on my hardrive and there's nothing in it, its just sitting in my library in my pictures section. The file location is C:UsersStevenPictures, and the file name is 50292_132656813424_564_q. Like i said this file is like invincible to everything i throw at it. Ive tried unlocker and renaming it and also tried using CMD commands to try and delete it but my computer cant find it.
View 9 Replies
View Related
Dec 10, 2010
A certain set of programs take over a minute to run. If I double click the executable it takes over a minute before the program launches.Equally attempting to access the file properties takes a similar amount of time.(the file happens to be audioconverter.exe (part of a set of programs to re-encode mkv's - e.g. strip out of the dts track and reencode with ac3, etc.)Only files in this set of sub-directories seem to be affected, the rest of the machine performs perfectly
View 2 Replies
View Related
Jul 28, 2012
This is perhaps the worst version of Office I have used. 2000 was fine. Skipped 2003. 2007 was innovative. 2010 was very impressive. 2013 is a serious step back. The new UI is extremely laggy on any computer of mine. The stupid smooth page reflow is just dumb, especially for long documents. Waiting for 50 pages of text to reflow takes forever. Plus, the time needed to save files is so long in Office 15. I hit "ctrl+s" and the entire program locks up, taking a good couple seconds to save. On office 2010, saving was almost instantaneous and I could still type as Office saved the file. This is not mentioning the sheer number of times Office 15 has crashed on me.
View 8 Replies
View Related
Nov 17, 2012
My pc, which is running Windows 7, is continuously booting to repair mode and 9 times out of 10 just boots to a black screen with mouse cursor at which point I have no option but to do an illegal shutdown. I have tried to run a system restore but an error message 'an unspecified error occurred during system restore (0x80070002)' keeps popping up. On the occasion it gets through to the desktop it says that it was successful. Next time I shut down and go to reboot I have the same problems. Also when I go to the internet the homepage has defaulted [URL] which looks similar to google but without the banner.
I dont think this is malware but possibly a critical windows update that has corrupted. If I get to desktop and then shutdown there are 11 updates that are downloading but on reboot the you can see that the updates are loading properly. The only thing I have changed recently is I have updated the printer drivers. For no reason, all of a sudden the other day the printer stopped working and once I updated drivers it was fine. This pc has worked fine for months until the latest set of updates came through. On further reading it looks like searchnu is malware. Could updating a driver really have installed this.
View 14 Replies
View Related
