I have tried to boot into normal mode and it starts but then freezes on the Windows logo, I have also tried last good configuration with the same effect, after this I tried all the versions of safe mode and every single one hangs when loading the drivers; as a result, I decided to try a system repair from disk, I boot from the CD and it loads files and then......it also hangs on the Windows logo.
View 4 RepliesWindows 7 Ultimate 64Bit on desktop PC has been running fine for several months (legit dvd and serial number). It had a pretty old NVidia 6600 graphics card so I decided to replace it with a newer card as the latest 64 bit drivers didn't seem to work and so I reverted to the old drivers some weeks ago and all has been fine since.
On installation of the new graphics card the PC wouldn't boot. It goes to the black screen with the coloured widows logo and wouldn't go any further ( I know the card is OK it came from my sons PC). I tried a repair boot without the cd and that didn't do anything either. I reverted to the old graphics card. Still wouldn't boot past the black screen as above BUT if I leave it I can hear the chime as Skype starts so it would appear as though Windows is actually booting but not displaying the desktop.
I have tried a repair from the boot menu and from the original dvd and they just hang on the blue graphics screen with the birds and the white squiggle. I therefore decided that I would do a reinstall and a new install now hangs at the same screen. If I try a boot to safe mode the boot hangs at classpnp.sys.
Ideally I don't want to do a reinstall but I will if I have to and if I can get it to reinstall.
I bought an Acer Aspire 4530 from an acquaintance that when I got it had an unverified version of Windows 7 Ultimate on it. He found a keygen and it worked to verify it. The next day it was running super slow so I restarted it but it came back with status: 0xc000000f which I googled and its a boot issue. I do not have a disk for it and all the repairs I have came across require a disk to fix the issue. My boyfriend has a disk but its for Windows 7 home premium. Will that work? Both the laptop and my boyfriend's desktop are 64 bit.
View 9 Replies View RelatedI tried to completely uninstall an expired deep freeze in my Computer, I went to registry and deleted the Folders named deepfrz after I rebooted my Computer it won't get past the Starting windows message it stops and flashes and I can see a blue screen then it tries to boot up again, the process repeats over and over, I tried doing a system restore by pressing F8 and the Startup recovery can't fix the issue either, is my Hard disk corrupted?
View 3 Replies View RelatedCan't boot into Windows 7 Ultimate with bitlocker anymore....I know the boot sector is messed up more than likely...I have done all the tricks with bootsec.exe and the commands ..I even tried startup repair it repairs but still doesn't boot ....The bitlocker key is on a usb hard drive and is connected but still the error.
View 9 Replies View Relatedi've been checking everywhere for some info and my problem doesn't seem like anyone elses. i just recently repartitioned my hdd usuing gnome partitioner and reformated to unformated to install windows 7. I've set my boot menu to boot off the disk drive, but when i put the windows 7 disk in it says to insert a bootable disk.
View 9 Replies View Relatednever partioned, dual-booted or anything like that. Hard Drive is... 282 size, 236 free.
View 6 Replies View RelatedI found this site through a google search of "long boot times". Recently and all of a sudden, my boot time has went from about 30 seconds to about 3 minutes, with a long delay between windows logo and welcome screen. I found cluberi's tutorial on obtaining a boot log and I've done so.
I've posted the zipped file here: Boot_Trace.zipx
I built 2 PCs with the following spec:
CPU: Core i5 2500
MB: Asrock H61M/U3S3 (revised esata issue fixed)
RAM: 4GB GSkill Ripjaw X (2 x 2GB)
PSU: 450W Thermaltake PSU
HDD: 1TB Seagate 7200 HDD
ODD: Samsung DVD Drive
On both PCs after a successful clean Windows 7 x64 Ultimate, starts windows for the first time etc etc ask me to select windows update setting, goes into windows desktop then does a auto restart (proper logging off restart etc). At this point, after bios screen when it attempts to boot from hdd the PC just resets inself and goes back to POST, over and over again. I've tried using only one stick of ram, tried using VGA to do a clean install again instead of DVI, tried changing my RAM to a lower clock speed, every other bios setting is default. I also tried updating to the latest bios and again did a clean install (delete and create partition) even tried installing x86 instead of x64.
i have a question: Can you use a Vista Ultimate disk to boot into a Windows 7 recovery partition. What i am attempting is to fix MBR in windows 7 but i don't have a Windows 7 disk and no one i know has one. My 7 wont boot at all but it should with a recovery disk. So can i use the Vista disk to boot to 7's recovery options ?
View 1 Replies View RelatedI have upgraded a machine from an Intel motherboard to an ASUS P8H61-M LX. New CPU and RAM. Before installing the new hardware I changed all drivers to standard drivers, did a system image to an external HDD. After installing the new hardware Windows hangs with 4 little colored dots on the screen (start of win banner?). A safe mode boot stops at classpnp.sys. The same thing happens if I try to boot from the WIN CD. I went back to the old hardware setup and tried to do a sysprep, but that failed with fatal error, but no more info. The HDD is set to IDE, using a PS2 mouse and keyboard. I cannot do a clean install as there is some very old software on the machine.
View 1 Replies View RelatedYesterday I was attempting to wipe my hard drive as I was putting my laptop for sale. Whilst it was wiping my laptop crashed and would not re boot properly but I was able to access the BIOS . I stupidly changed some settings following some advice on a forum I now cannot find and when I tried to re boot it stays on the philips page for around 10 minutes. None of the keys work, like F12, F2 ect. After ten minutes it give me a screen thats says 1.Insert your Windows installation disc and restart the computer.2.Choose your language settings, and then click "Next".3.Click "Repair your computer."If you do not have this disc, contact your system administrator or computer manufacturer for assistance.Status: 0xc000000fThis is how I understand it as my system is in Polish and Polish is not my first language and with technical language I am not fluent and I beleive thats how I made the mistake in the first place in the BIOS.
View 9 Replies View RelatedI have been trying for a while to install mac os x on my windows 7 pc i have followed hundreds of different tutorials and hit a wall at every one.
what is the best way to install mac os x on a single hdd? i no my pc is compatible with it i dont no where im going wrong.
Currently using 400GB HDD #1 working with Vista Ultimate 64Bit OS.Recently bought 500GB SATA HDD #2 installed Win 7 Pro I realize I can just set in bios to use one or the other drive, but that doesn't sound like a best way. In order to use both drives it may be best to dual boot.
View 9 Replies View RelatedMy laptop takes lot of time for boot up.
Config :
Name : Asus K53SV - SX520D
Ram : 4GB DDR3
Processor : i5 2430 2nd gen
[Code]...
I've updated all drivers to latest version. I'm using CCleaner , daily clean files and registry , defragment drives, disabled everything from bootup using ccleaner (in msconfig all options are untick) .
Still laptop takes lot of time before the "Welcome" screen appears and when the "welcome" screen (in between the bg changes to black ). I tried creating boot trace but then I got a BSOD, I used system restore to fix it .
I recently built a system and it has been running relatively smoothly for a while until all of a sudden my boot time at least doubled. I dont think that this is general slowing down due to more programs installed etc. there must be some kind of problem. At first i thought it might have been one of my USB devices so i removed all but my necessary ones (Mouse, keyboard, wireless network and sound.) and it was still very slow so im not quite sure what the problem is. Sometimes it pauses on the welcome screen and sometimes a black screen just before that. Any ideas on how to fix this problem? Also while im asking about this, does anyone have any tips on how to keep my PC running nice and smoothly? Normally i would just defrag/disk cleanup/virus scan when i start to notice it slowing down and physically clean the case if i notice any overheating.
I'll list my system and USB devices below.
Intel Core i5 760 @ 2.8Ghz
Corsair XMS3 2x2GB 1600Mhz
ASRock P55 Deluxe
Palit GTX 460 1GB SE
750W XFX Pro
500GB Seagate Barracuda 7200rpm
Antec 902
500GB Toshiba External HDD
EMU 0202 USB 2.0 Audio Interface
Netgear WN111 Network Adapter (On a 2m USB A-B Cable)
Logitech K200 Keyboard
Logitech G500 Mouse
I have a desktop using a Gigabyte GA-Z68X-UD3H-B3 (revision 1) motherboard. Using the Gigabyte @Bios utility, I updated the Bios to F12. After rebooting as @Bios suggested, I can no longer get Windows to boot. I've noted the following:
1) I have issue accesing the Bios setup. Sometimes I can access it, sometimes I cannot;
2) When I am able to access the Bios, I can confirm the disk Boot Priority, however it's is now showing the drives as SCSI (I only have SATA drives);
3) There is a new setup screen displayed after the Gigabyte logo screen shows. This screen now shows 'Serial ATA AHCI, Version iSrc 1.20E.
Copyright (c) 2003-2008. Intel Corporation.
**This version supports only Hard Disk and CDROM drives. **
Please wait. This will take a few seconds.
Then shows Controller/Bus/Function/Port/Device and lists all harddrives. At the end of the drive list it shows 'AHCI Bios installed'
4. After step 3, it shows the prompt 'Loading Operating System' - the boot hangs at this point.I DID backup the existing Bios before updating it. I have not gone in and copied that file to a floppy to try and flash the Bios using the backup (don't know if this is possible).
As you see in my title it wont boot... It shows the No Boot Disk screen...The only thing I did yesterday was install Warcraft 3and if or is Intel Core i3 and in InsydeH2o Utility it shows No HDD/SSD are connectedscreen[URL]and awhile ago before it started malfunctioning I experienced a BSOD soEDIT:I tryed going into the Advanced Boot thingy which requirespressing f8 but it just shows black screen and everytime i press it beeps
View 1 Replies View RelatedI was running Windows 7 ultimate x64 on my system (specs below), and I usually let my computer go into hibernate as it does that automatically after some time of system inactivity. Usually it will boot back up with no problem but then last week I tried to boot it up, it crashed and said system error.. I can't remember everything it said as it was obviously coded; since then I haven't been able to bring up the same warning screens.
Instead what happened was I reinstalled windows 7 on the same drive, formatted and all, and after installation it would finalize my settings, etc. After which, it would do a final reboot and, after bios goes, the computer hangs on a command prompt type screen with just a flashing underscore. Asking my family members, they proposed it might be a hardware issue so I bought a new hard drive (Seagate Barracuda 1tb.. not sure if that matters) and tried installing windows on that drive; same exact problem.
I also tried different combinations of RAM with my board, including just one stick of RAM, tried taking out the video card, tried taking out the sound card, etc. No dice. So my dad took his drive from his computer, that has an install of VISTA x64, and I plugged it into my computer and it worked perfectly. Conversely, I plugged my drive with the Windows 7 install into his computer and it also worked perfectly. We tried playing around with a few settings in the BIOS, etc. but nothing gives.
SPECS:
MOBO: Intel DP45SG
Chip: Q6600
Ram: Hynix 2x2gb and 2x1gb kingston
Vid card: Zotac GeForce GT 610
Sound: Creative X-Fi Xtremegamer
BIOS: Should be up-to-date, irregardless it ran Windows 7 before
I have windows 7 ultimate and for what ever reason when starting my laptop (HP DV62114tx) Im being requested to enter in the bitlocker key. Now here is the issue, the bitlocker key is on the desktop. (silly me)
Im wanting to know if there is any way to either retrieve the key or is there an over ride code for bitlocker so I can log in to my laptop.
I think moving forward, I will not use Bitlocker or look for an alternate solution, that is once I get the Laptop running again.
I had a new system made up for me a few months back and as I was so insistent on excellent cooling - fans - RAM etc, I didn't pay enough attention to the HDD's.Subsequently the system was installed on an SSD 60GB. For a normal user this would be adequate, but I work with a lot of digital programs that write to the app data folders and I can't safely move those onto the D:Drive where I have programs and Docs - all libraries. I have hard linked everything I could, but the more Windows updates and other updates I do, the Winsxs folder is already 7.2GB.I only have 30GB's left after a very short time and would like to be able to install another Windows 7 x64 on a 1TB drive I can free up easily. Ideally, I want to keep the SSD drive as an OS to use for general use and get all my graphics programs onto a different system for work purposes.I have not ever dual booted before and have no idea how to go about it - or I do but it could be wrong.Is it even possible to have one OS on an SSD and the other on a normal HDD? I do have an extra unused OEM version of Win 7 x64 ultimate and hope that is legal to use two identical OS's on same machine - with different keys..If I cannot dual boot I am willing to erase the SSD, probably use the space for something else, and use a normal spinner. It's that important for me to be able to work without disabling everything and have space left over.
View 1 Replies View RelatedOk so after years of running XP, I finally got an external HDD to back all my crap on and Windows 7 Ultimate. I backed up all my stuff, ran the win7 DVD through start up, reformated my hard drive, installed windows 7.
It installed fine, rebooted a couple of times through the install, finishes, and logs me to the desktop. Its all working fine, I can use the net etc. I shut it down to restart it, and it doesn't start back up. It gets to the bios window where it decides to start off the dvd or hdd, just prior to where it should normally change to the 'windows is loading' screen, and just sits there, blinking and doing nothing.
I've done three installs, I took out the hard drive, reformated it with another computer, made sure it had a ntfs file system, everything, it's working fine. But every single time I install windows 7, It logs me into the desktop for the first time, I can do everything fine, but then if I Shutdown or restart, it hangs on the screen prior to windows loading. I can't even choose a boot option.
I've seen some ideas on other forums, pulling the power out, resetting the bios/cmos, changing boot sequence, unplugging all non-essential hardware.. nothing. It's like as soon as I install windows 7 my hard drive isn't there anymore.
Specs:
Abit AX78 - Latest BIOS version
AMD 9950 quad core 2.6
4GB DDR2-800
ATi HD 5870
Western Digital 500GB
somehow my hard disk partition became dynamic. i formatted system and insttaled windows 7 ultimate in the dynamic disk partition. from then onwards system is not booting. only black screen with cursor on the upper left corner of the black screen.
if i am not wrong windows 7 cannot boot with dynamic disk. i will have to go to the disk management and after conversion of dynamic disk to basic disk with deleting all the volumes (data). it is possible to boot with windows 7.
but system is not booting...not opening..so i cannot go to disk management.
hrad disk is showing some partitions with system reserved. except system reserved all the partitions are shwoing dynamic. and in only one partition formatting option and installing OS option is coming while i booting system with OS DVD.
reinstalltion through OS DVD is possble by booting through OS DVD. but in advanced option repartition option is not coming. the one partition in which i installed OS previously, only in that formatting option is coming. in other partition neither formating option is coming nor extend.
I will start off by stating my relevant PC Specs for this thread:-
Asus P5B Deluxe MoBo
Intel Dual Core E6600 @ 2.40GHz
GeForce 7900 GS 512Mb
2 x 1GB DDR2 800MHz Corsair Value RAM (original) in Yellow Slots A1 & B1
2 x 1GB DDR2 800MHz Corsair Gaming RAM (NEW) in Black Slots A2 & B2
So I have just installed 2 extra GBs of RAM to bring my total to 4GB. After a successful boot and then checking my 'System' info Windows states 4.00GB of memory is installed but only 2.94GB is usable.Therefore I went ahead into my BIOS to enable the 'Memory Remap Feature'.However on reboot the PC gets to the 'Starting Windows' screen and doesn't get any further. The Windows logo doesn't start to appear. It just restarts going through all the usual screens again, eventually giving two options of:-
Launch Startup Repair or Start Windows Normally. The repair never works and Windows will never start normally again until I return to the BIOS to disable the mem remap.I reset the CMOS to Factory Default settings and tried again but did nothing. Also I have never updated the BIOS from the original version as I'm a bit scared to do so.I have looked hear for info on voltages and clocking but didn't get anywhere. Well got an overclock at 3.60Hz but only ran in Safe Mode. Obviously this is slightly irrelevant the above but was just trying stuff out and trying to learn more.
I can't install my Windows Ultimate 64 bit edition on my RAID 0 Western Digital 500GB hdd's because on the boot screen my computer keeps telling me to "Reboot and select proper boot device or insert boot media in selected boot device", I've done both those instructions, rebooted, reinserted, all of it, no solution. I made sure my boot priority is the drive first, and raid drives after. Still nothing. But this is the interesting part, last time I fixed this problem by using my previous computers dvd drive to install instead of the blu ray, it installed and everything was right with the world.
But I have since then thrown out the old DVD drive, and now have nothing to install with. So what I did in the past hour was used a freinds DVD drive to install and it did not work. When my System Config, is set to RAID, it calls both my blu ray and his dvd drive, ATAPI CD, when in IDE, it calls my blue ray a blue ray and his dvd drive a dvd drive. I simply want to do a clean(custom) install of my windows 64 bit on my two RAID 0 HDDs, I've checked the boot priority, I've put both hdds in RAID0 and I've also used someone elses dvd dive to try and install.
I have a new Toshiba Qosmio X770 laptop with Dual 120 Gb SSD drives. From the factory it had Win 7 Home. I upgraded immediately to Win 7 Ultimate x64. I set up the VM to use XP (Have to use XP because current dev projects with work are stuck in old ages on XP for the time being). I can run the XP Mode in VM fine and even Visual Studios functions fine. There is a problem with the 3rd party drivers for the USB comm boards we are using, the USB drivers apparently cannot be shared across the VM environment for the particular ones we are using.
View 1 Replies View RelatedSo my desktop computer had a nasty virus or something on it, and it was originally a 32-bit Windows 7 Home Premium (as it came with the computer).To get rid of it, I decided to wipe the whole HDD and install a clean Windows 7 Ultimate. But I noticed that the boot time for computer now is MUCH slower now. Before on the Home Premium it would only hang at the "Welcome" screen for only about 5 seconds, then go straight to the desktop and I would be able to use it within minutes. Total boot time: probably under a minute.Now on Ultimate, it hangs on the "Welcome" screen for about 30 seconds, then takes another 10 seconds before I can do anything. Total boot time: 1.5 or 2 minutes.I've tried disabling some of the startup programs and ran a clean boot, but nothign wouthe boot time as fast as it was before. I know that Ultimate has a lot more features, does that explain the extra boot time?
View 1 Replies View RelatedMy system dual boots to either Windows 7 or Vista Ultimate, or, at least it is supposed to. Something happened and now the system just boots to Winodows 7 without giving me the choice to boot to either. When I use F6 I find that only Windows 7 is listed in the Operating Systems box.
View 1 Replies View RelatedCan I upgrade from Windows ultimate 32bit ver 6.1 ( build 7600) to windows 7 ultimate 64bit edition and keep all of my installed programs and files ?[meaning not having them moved to a new folder called windows.old]
View 3 Replies View RelatedI bought the full retail Win 7 Ultimate and trying to upgrade Windows Vista Ultimate to Win 7 Ultimate, both 32bit. I get to the Expanding Windows files to 21% and nothing. The program is still running and stuck at 21% but after waiting 3 hours I shut power off and Vista was reinstated. Why can't I get past 21% Expanding Windows files? I want to use the upgrade because I have a ton of programs on my Vista and don't want to spend days reinstalling them.
View 9 Replies View Relatedhow can i change my 32 bit win7 ultimate free dos to 64 bit win7 ultimate?can i do it without charge? where can i get it done?? can i get the iso/disk in downloadable format?
View 6 Replies View Related