My system has Windows 8 with UEFI. I want to install Windows 7 Pro on another partition. I have turned off Secure Boot in the UEFI/BIOS. When I try to install Windows 7 Pro from a DVD it shows "windows is loading files" and then gets stuck on "Starting Windows" for ever. This happens even when no USB peripherals are attached.
View 2 RepliesI am trying to install Windows 7 through USB in my Dell studio 1555 Laptop. Every time it gets stuck at "setup is starting".I have already disabled all other boot options except USB. There is no floppy drive option.I have gone through more or less every post related to this problem , but the common solution that is to remove all the USB, Firewire etc. attachments. It does not work in my case as I am installing from USB.
View 2 Replies View Relatedif I try to boot it normally it gets blue screen and dies. The same thing happends if I use fail safe. (crashed at crcdisk)So I thought idd reinstall it. However when i boot up from my windows cd, I only get the 2 possibilities to "setup and recovery". No matter which of those I choose it goes to "loading files" and then to "starting windows".I've reinstalled quite a few computers, with xp and windows 7, and I've never had any trouble doing so. So i thought idd try to take out the hdd manually, but I realised I dont have the cables to connect it to my other pc, and clean the hdd that way.
View 1 Replies View RelatedThe power in southern california today and when it came back on my computer wouldnt boot all the way to windows. I have tried booting fromt he cd but it does the same thing and just stays at the splash screen. I have tried recovery mode and it sticks at the windows is loading files bar. Safe mode doesnt work either as it sticks at one file and stays there the entire time.
View 9 Replies View RelatedI had just put this build together and occasionally when I boot up the computer, it would freeze at "Starting Windows" screen and will not go anywhere else until I hard shutdown the computer and boot it back up and hope it doesn't get stuck again.I reinstalled Windows 7 thinking it's the new SSD I bought but the problem still occurs, I also ran CHKDSK again and no errors have shown up.I haven't ran a memory test program yet to check my RAM but I don't think that is the issue since I do not get BSOD of any kind.I also have another problem that rarely occurs and only happens when watching you tube videos, the screen completely friezes and artifacts show up as if the video card is broken but I never have such problems while playing video games such as BF3 and Starcraft II.Anyhow, I have searched Tomshardware and the web but still cannot find a solution to this and I hope you guys can help me find what the problem is.I'm beginning to question my RAM, Motherboard, or SSD at this moment.
View 7 Replies View RelatedMy laptop decided not to start up today. It shut down last night normally, today it keeps getting stuck on "starting window". I tried safe mode, but it gets stuck at starting windows. I tried starting from disk, it says loading files then it goes start to the starting windows and gets stuck. I tried pressing f8 but there is no repair computer option. Did my ssd die?
View 5 Replies View RelatedDoing a Normal startup, or booting from the Windows 7 cd it will get so far as the Starting Windows screen, the Microsoft copy-write shows up briefly greyed out some, and just sits there. In Safe Mode, it loads everything seemingly, lastly avgidsha.sys, then sits on Please wait...I have narrowed it down to hot the HDD or memory. I've put another HDD with Windows 7 on it, getting the same results. The MemTest 86+ cd actually loads and runs, came up 100% with no errors. Other suggestions that I have found use bootable CDs that want to start Windows first.The Windows 7 CD, Windows Defender Offline, Windows Recovery disk all get stuck at the same place as the HDD, the Starting Windows screen
View 8 Replies View Relatedmy computer crash while rebooting it and every time i try to turn it on it always say "setup is starting services" and it will say to restart it and i did restart it but it always go back to the setup starting services and just ask my to turn it off again. what should i do?
View 1 Replies View RelatedWhen ever I turn my computer on it is always stuck on the Starting Windows screen and when I try and do it in safe mode it works but was I am signed in all that shows up is a black screen with Safe Mode in each corner. I have also tried start up repair but it says it can not find a problem or it will just continually search for a problem (waited 4 hours then I just turned it off)
View 7 Replies View RelatedFirstly my laptop (which is a Dell Inspiron N5030 running Windows 7 64 bit) starting showing up with a black screen when it was trying to come out of hibernation, it gave the status as 0xc0000242 and saying there was a fatal error with the hiberfil.sys and that it would have to restart. This continued for a while with the laptop closing all the applications that I had open when I hibernated, sometimes it would come out of hibernation without any problems at all. Then my laptop started to become very slow and particularly when loading up windows after being shutdown, restarted or hibernated. It was staying on the "starting windows" screen for about 5 minutes before actually starting up. I did a system restore on the laptop but no luck. I did a CHKDSK error check on the laptop but had no luck. I did a start up recovery but once again no luck.
Yesterday I decided to back up all my data onto an external harddrive and reinstall windows 7 completely as I have had the laptop over a year now and it was getting pretty full of junk anyway. I thought the problem had go away but it has had all of the above problems today no aswell, it is CHKDSK checking at the moment and has found several unreadable segments.
I recently purchased a Dell XPS 15 (l521x) that came with Windows 8. The system boots from the hard drive through UEFI by default, so I think the hard drive is already GPT. I am attempting to install Windows 7 from a UEFI bootable USB. The system goes through the 'copying files' phase and then goes to the Starting Windows screen. As the colored dots of the Windows logo are circling, the system freezes. Can someone help me fix this problem? The following are the steps I took in order to install Windows 7:
- Formatted a brand new 4GB USB drive to FAT32
- Downloaded Windows 7 ISO (I have a key)
- Extracted ISO files to USB
- Made adjustments so that USB is UEFI bootable (efi/boot/bootx64.efi)
- In BIOS, set SATA Operation to AHCI and disabled Secure Boot
- Select USB drive from UEFI boot menu
a week ago my windows 7 ultimate crashed in the starting screen showing the dam blue screen and warning me that windows couldn't start. I went to the self repair tool.It tool like 4 hours to fix the issue. Then it said, that windows will start normally after that. What a lie. After the starting screen I got the black screen, just with the mouse. I tried everything I know, scanning the disk surface with other computer, I used the windows 7 installation CD. And that told me it couldn't find any issue starting windows. What can I try now? This happens evenwhen I boot normally or in any safe mode.
View 3 Replies View RelatedI just received my new ASUS HD7850-DC-2GD5 video card. I installed it, booted up Windows, and installed the drivers from the included CD. Then I rebooted Windows. However, my system hangs at the 'Starting Windows' screen. Actually, it seems that only the video hangs--because if I type in my password and hit enter, as if I could see the welcome screen, I hear the 'correct' sound that normally plays when I log in. I just can't *see* what's going on.
I reset the system and booted into safe mode, where I entered Device Manager and uninstalled the HD7850 display adapter. Then I rebooted Windows, and again I'm able to operate normally -- but without the AMD Radeon drivers. I've tried downloading the latest drivers from the AMD website, but installing those leads to the same problem. I get stuck at the 'Starting Windows' screen.
This has me totally perplexed... I bought an ASUS-branded card specifically to try and avoid drama, as I also have an ASUS mobo (the P8Z68-VPRO/GEN3). My CPU is an i7 2700k, not currently overclocked at all. My PSU is an XFX PRO850W XXX Edition Semi-Modular 88Plus 850 Watt PSU, which should be up to the task, right?
I just finished building my first computer in 8-9 years or so. I was quite excited that my computer booted first time I turned it on but my excitement was soon overwhelmed with defeat. Let me start by linking my computers specs. [URL] I downloaded windows 7 from my schools msdn website I have the key and everything. I then burned it to a dvd. After booting from my dvd drive the loading bar continues and finishes. The 4 colorful balls float around then come together and my computer gets stuck.
Now It's very important to note that I was able to get past this screen after restarting my computer 4 times and I was successfully able to load continue on to installing windows only to get stuck in the same screen while booting from my ssd. Then I thought this issue could've been caused by using my SSD. So I unplugged it and repeated the same process using my seagate HD same thing happened. When I try starting it in safe mode the computer continues on to loading windows but I get prompted to restart it in normal mode so that the installation can continue.
I dropped my laptop this weekend. But it still worked for a few minutes before it froze. So I powered it off and tried to turn it back on. It turns back on just fine, but will continuously load the "Starting Windows" screen. I tried doing diagnostics and repairs, nothing. When I load it in safe mode, it loads up until the ClassPNP.sys, and then freezes.
View 7 Replies View RelatedI have a gateway desktop with the windows 7 it is stuck on Saying setup is starting services, I do not have my origional windows 7 setup disk.What do I need to do to get my computer up and running again.
View 1 Replies View RelatedI refuse to believe my 500g Sata Hard drive that has over 400gs of file and information, is all now magically a paper weight. No Physical damage has happened to the Drive at all. This is the Issue:Originally Half of the Drive was Encrypted with True Crypt and the other Half was the System Drive((C drive 50g)) and a "general" Drive/ ((175gigs)). The Problem started when some odd way it seems My Encrypted drive become corrupted to the point it would no longer easily mount. It would take 4~5Min's to mount as opposed to the normal 4~5 seconds.What happens when it did mount, The Drive was not working correctly. I couldn't access my files on that drive at all. Not only that, While it seemed like it did Mount the True Crypt Drive, my entire CPU became Non responsive. I couldn't do anything. I was unable to click on anything on the desktop, bring up task manager or even ctrl+alt+del to log off or anything. It was like it was frozen but I was only able to move the mouse...I waited a while((15~20Min's)) and went to restart the CPU by holding the power button.
Now When ever I try to load or boot from that Hard drive...Nothing Happens....It hangs at the "starting Windows" screen. I have windows 7-64bit ultimate. I tried to load from the Win 7 disk, and it hangs at a blank Screen. When I tried to use the repair feature of the Win Xp service pack 2((Remember windows XP *_*??))It hangs at analyzing the Hard drive "47850 asapii at 0 at 0 something something"..When I try to use the advance options of the Windows 7 boot, Safe mode of all types hangs at lading the drivers, Last Known good Configuration hangs at starting windows. Its Like part of the HDD doesn't want to load for anything in the world . And When I have mentioned Hangs I mean it sits there for 1~2 hours and nothing has changed.
I have ideas in my head But I don't even Know if they are possible. Oh Oh..at when I try to Load the HDD by having a back up 40g hard drive be the main booter it STILL hangs at the starting windows screen. I know its sometimes suggested to try it HDD in another CPU but if its not the main Boot Drive is that the same thing? Really don't have any Mobos that have Sata Slots for me to try that out on.I'm praying a simple chkdsk would Solve everything But there's no way I can Issue that Command. My Question(s) are:s there a Way to force the CPU to do a chkdsk command pre boot?Is there a way to have the HDD disabled at start up and enable it during the back up drives desktop((Via check for hardware changes or the "Manage" feature by right clicking computer from the start menu
I recently built a computer, and tried to install Windows 7 OEM on it, but it gets stuck at the screen where it says starting windows and the logo appears. The logo gets smaller and larger. I've been told it might be something with the RAM, but tested it out and that's not the problem.
View 2 Replies View RelatedWindows wont boot up I get stuck on the "starting windows screen" Startup Repair cannot repair this computer automatically:
Problem signature:
�Problem Event Name: StartupRepair Offline
�Problem Signature 01: 6.1.7600.16385
�Problem Signature 02: 6.1.7600.16385
�Problem Signature 03: unknown
�Problem Signature 04: 21200718
�Problem Signature 05: AutoFailover
�Problem Signature 06: 10
�Problem Signature 07: BadDriver
�OS Version: 6.1.7600.2.0.0.256.1
�Locale ID: 1033
my laptop will not load up. I can get it to the screen where it says repair computer, safe mode and all that. (advance boot options) but anytime I click any off them it goes to a screen where it says I need to put in the windows installer disk. I do not have any disk but I downloaded the repair disc from my other laptop. I put the disk in the computer and restart it and it just goes back to same screen. It does not automatic rebot, or ask me to rebot from disk.
View 2 Replies View RelatedI have had Win 7 installed for a while now).
Here is a summary of my problem:
1) My computer recently got stuck on the "Starting Windows Screen." So I manually held the power button to reboot.
2) On reboot, it said there was a need to run a startup repair, which I did. Everything checked fine, except for the last one which said "System Volume on Disk is Corrupted," which it claimed to have successfully fixed.
3) After rebooting from repair, the system gets stuck on "Starting Windows Screen" for a good 10-15 minutes, after which it runs a registry check. After it completes that I get hopeful -- but the screen then gets stuck on an all black screen with just the mouse cursor and nothing more.
4) Additional note: Attempting to start the computer on "safe mode" leads safe mode startup to become stalled on "DRIVERSCLASSPNP.SYS"
5) The lastest attempt to repair yielded this message: "Startup repair cannot repair this computer automatically.
Problem event Name: Startup Repair Offline
Problem signature 01: 6.1.7600.16385
02: 6.1.7600.16385
03: uknown
04: 21201099
05: AutoFailover
06: 2
07: Corrupt Volume
OS Version: 6.1.7600.2.0.0.256.1
Locale Id: 1033
win 7 stuck on starting windows screen after starting every time so i have to restart the sys tem severel times.i don't know pls give the solution.i'm using win7 ultimate
View 1 Replies View Relatedwin 7 stuck on starting windows screen after starting every time so i have to restart the sys tem severel times..i'm using win7 ultimate
View 2 Replies View RelatedI'm trying to install Win7 on my PC. I'm getting a black screen right before the language screen is suppose to be shown. This is happen right at the beginning : the white installation line is running in the bottom of the screen and then a Windows logo appear, right after that suppose to be the small window with the language selection, but instead , I see a black screen.
I CHANGED the cd's for couple of times, this is not the cd. I also copied the image to a flash drive and tried to install from there - Stuck exactly at the same phase.
I'm trying to install Windows 7 on my PC.I'm getting a black screen right before the language screen is suppose to be shown.This is happen right at the beginning : the white installation line is running in the bottom of the screen and then a Windows logo appear, right after that suppose to be the small window with the language selection, but instead , I see a black screen.I CHANGED the cd's for couple of times, this is not the cd.I also copied the image to a flash drive and tried to install from there - Stuck exactly at the same phase.
View 9 Replies View RelatedRight, straight to the point. I've recently been given a few parts of computer from my friends that has now been assembled into a working desktop.I've got Windows 7 saved as a .iso file on a usb-hdd. I manage to get it working up to the point where i click "Install Now" on the Windows 7 installer programme, then after a couple mins of loading once clicked it comes up with this message."A required CD/DVD drive device is missing. if you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now. Note: If the Windows installation media is in the CD/DVD drive, you can safely remove it for this step."There are 3 options that come up with this pop up being "browse" "ok" and "cancel" After clicking "ok" it comes up with another message saying"No device drivers were found. Make sure that the installation media contains the correct drivers, and then click OK."
View 9 Replies View RelatedI wanted to install windows 7 on my notebook compaq. When I finish most of the steps. The first windows welcome screen can not load and stops just blue screen.
View 2 Replies View RelatedI am trying to install Windows 7 on a new hard drive but it is hanging on the "setup is starting" page.
View 2 Replies View RelatedI am with a friend re-installing Windows 7 on his laptop. Unfortunately the laptop had been infected beyond repair by a virus/malware and would not boot past bios. When installing Windows 7 x32, I make it to the "Setup is starting..." screen and it does not continue. It is not the disk as I have used the same one to install it on my laptop. The laptop is a Dell Inspiron 1545 with 4gb of ram and 500gb HDD space.
View 14 Replies View RelatedA while ago i dual booted windows 7 onto my vista running laptop and it works perfectly. It is a huge improvement on vista, it is faster, better designed and its new features are very useful. Because of this success I know am trying to dual boot it onto my xp running desktop. Unfortunately it doesn't seem to like it.
I have used the same technique that i did on my laptop to install it. I have burnt the iso file onto a disk and run that disk while the computer is running. Checked for online updates and done a clean install. The installation works fine and quite quickly until it comes to the first restart. It restarts and I select "windows setup" on the bios screen as apposed to "an earlier version of windows" which is my xp partition.
It then changes to the starting windows screen that happens just like on my laptop, except the windows logo never materializes and it stays as a black screen with the words "starting windows" on it. i have left the computer on overnight and no change. I have tried reinstalling several times with no luck, both using the same method as before and booting from the disk at startup. Although when I boot from the disk it just skips straight to the same frozen windows startup screen.
I have downloaded the windows 7 adviser software but the program cant seem to make its mind up. Sometimes it announces that my graphics card cant run windows 7 aero and sometimes its fine. I have checked the windows 7 specs and my graphics card appears to meet all the requirements, both dedicated memory and direct x 9 support.
Here are my pc specs:
Dell dimension 5150
XP professional sp3
3ghz intel pentium 4
5 gb RAM
Radeon x300 SE 128mb hypermemory
direct x 9.0
creative SB live! 24-bit
160gb maxator SATA HDD
Setup is starting services.Windows could not complete the installation. To install Windows on this computer, restart the installation.About one month ago I decided I wanted to have a clean install of windows 7 on my acer machine. I did this by using an acer made pre-installed program. It claims to be very straightforward, all you have to do is click a button and they will reinstall windows 7 for you and even back up all your data ,so that after the clean install you don't lose a thing. Sounded great but in reality it has stopped my notebook from working.I am now in a circle-jerk of the error message I stated in the beginning of this topic. Once my computer restarts it just gets me the same error message again. I tried booting from a bootable USB-key with the windows 7 iso downloaded from official sources. But this did not do anything from me. I also went to acer support in my city. They offered me to fix it. All they had to do is copy all the info of my hard drive I wanted to keep and do a fresh install of windows 7. Would take them 3 hours. This is the easyiests option for me. But problem is I live in China and I don't trust those tech support guys for good reasons. I went there with my laptop, the tech-support guy put in a usb-key and started up my computer. It started some kind of diagnostics. After 20 minutes of this he stopped the diagnostics and started running some chinese software on my computer. Presumably booting from the USB-key. After a couple of clicks he was browsing around on my hard-drive. I was right behind him and could see him every move. He was snooping around my folders looking for all sorts of personal stuff. He was going to folders he had no business going to. I think he thought I had no idea what he was doing or would not recognize he was snooping around on my computer. At one point he went into a folder and told him not to go there in chinese. He quickly exited, but then couple of seconds later went back to that same folder to do some looking around. Presumably cause he thought I would not notice. So I do not trust these people one bit. And would not want him to copy all the info of my hard drive to then re-install windows7.
View 1 Replies View Related