Just did a fresh install of Windows 7 Ultimate 64bit. Trying to install the motherboard chipset but got confused with these options. Which one do I install? Asetup or Setup? Motherboard is Gigabyte 880-GMA U2DH rev2.1
View 5 RepliesI started everything up and entered my new OS disk,thenit says 'loading operating system...' for not even a second then goes on to say'system boot failure, insert system disk and press enter' I re enter the disk but then it says 'disk boot failure, insert system disk and press enter'. I don't know what to do, I've gone into BIOS and but the cdrom as the first boot device also but nothing seems to work.. everything is brand new and my motherboard is GA-970A-UD3 AMD type
View 4 Replies View Relatedi installed windows7 on my AMD anthelon and i am using s-series m61pme-s2 gigabyte motherboard. mydisplay driver and sound drivers do not support windows7.
View 2 Replies View RelatedI updated the bios to the latest version on a gigabyte GA-Z68X-UD3H-B3, using @bios application in windows. I have two disks in a RAID1 All was working fine but upon boot i was getting a message about enabling ACHI. Stupidly curiousity got the better of me and I eventually I said Yes. The next time i turned off i couldn't boot to windows. I went into the bios and noticed that the SATA was set to ACHI, but the bios still saw my RAID volume set up and everything appeared Normal, so i changed this setting to RAID.
it still wouldn't boot to windows - giving some message about not having access to the drive. i tried using the windows install disk but that gives error messages about RECENV utility not working, use chkdsk. it does show a drive as a volume D: (not C: interestingly) I have tried running repair and that doesn't work. I have tried chkdsk/r and that didn't help. In fact that degraded the Raid so i had to rebuild it, and now that is running Normal.
I also can't see any of my restores when i use the install disk.
I don't want to do a reformat and start again as there is data on there that is newer than my last backup.
So the options i am considering
1. remove the disks - place one of them in an external usb case and try to extract the data to save it - not sure if this is possible? and then do a clean install or try the below.
2. can i go back to the previous bios version? is that just a case of power off everything and remove the CMOS battery? and power back on?
3. go through with a new install of win 7 but don't format the drive and see if it just corrects any bad files.
getting Gigabyte g31 motherboard drivers
View 1 Replies View Relateddoes gigabyte ga-z77-d3h have a motherboard speaker built in
View 4 Replies View RelatedMy motherboard is Gigabyte GA-M61VME-S2.
On their site for windows 7 there is only the realtek audio drivers.
However, there are vistra drivers.
I installed windows 7 and the connection to the internet is working(on xp without the chipset drivers there was no internet connection).
Should I try to install the vista drivers or it is unnecessary? Everything is working ok as far as I can tell.
(I did installed the win 7 nvidia drivers for my graphic card)
I have a Gigabyte motherboard that has just stopped working.Ive tested the PSU CPU RAM etc and they are all fine and the motherboard hasnt got any life at all for some unknown reason.the board is 11 months old and is being picked up by courier on monday and they said they will give me a refund.so in the mean time ive been looking at new boards as the one i have GA P41-ES3G seems to of been discontinued.y old board ran off DDR2 was Socket 775 Intel Q8400 Processor and its hard to track down boards that will take those components.I have seen one:- GIGABYTE - Motherboard - Socket 775 - GA-G41M-Combo (rev. 1.4)It says Rev 1.4 but the ones ive seen for sale either dont say what rev or say 1.2 or 1.3What are the differences in Rev and would it be a problem if its an older Rev i buy?
View 4 Replies View RelatedMine is gigabyte g31 mother board it is taking too long time to install windows 7 or 8 into it , it will asks press any key to boot from CD\DVD and i pressed after that ,it will start loading windows files and logo will appear and it takes more than 3 minutes to show install windows and also after that it takes 3 minutes to show setup is starting up.
View 3 Replies View RelatedNoticed that Gigabyte has updated their downloads for my mobo EP35-DS3R to include Windows 7 specific items for 32-bit and 64-bit.
If you are running a Gigabyte board, might be useful to see if updated Win 7 downloads are available for you.
get sound and audio drivers for a gigabyte motherboard
View 2 Replies View RelatedUpgraded the bios from F4 to F5 and no effect. Can't see any devices that I plug into these ports. Never liked the transfer rate on these ports when they were working.Very slow - like a standard USB port.
View 6 Replies View Relatedcan i set gigabyte motherboard support with dd3 ram with amd Athlon(tm)64x2 4000+ processor
View 1 Replies View RelatedI have vga driver for win xp, but it doesn't work on win 7. My motherboard is Gigabyte GA-8SIMLH. What can i do now ?
View 2 Replies View Relatedi'm having trouble installing the latest catalyst drivers.the package fails and keeps knocking me back with the INF file was not find.ive installed the package to a folder and tried to navigate via system and update the driver file but get an error regarding the information set or element settings (and the driver doesn't update.my graphics card is still working so to speak, i can enter games although my system crashed 2 hrs ago from dxgmm1.sys and thats what prompted me to uninstall and reinstall my drivers but im running into alot of problems.i've also tried reinstalling through safe mode and still not working (ive used driver sweeper to make sure it's a fresh install)
View 4 Replies View RelatedHaving read some threads I am under the impression I won't have to purchase another copy of windows but I was wondering what I will have to do in order to continue using the same copy of windows.
Some people have indicated that I will need to contact Microsoft but I couldn't determine if they meant the automated phone number used to activate Windows or if was another number?
I have a Western Digital 1 TB USB 2.0 that I have connected to a computer that has Gigabyte connection to my NAS which can handle Gigabyte speeds.I am only getting 30.1MB/s.Is there any settings I can do to windows so that it can send faster?
View 1 Replies View RelatedCan we install 32bit windowsXP on 64bit motherboard
View 2 Replies View RelatedI have been running win 7 for about 6 mths now dual boot with xp. I have done a fresh install and got rid of xp and running win 7 straight up. My system is a Gigabyte AM2+ with a phenomII black edition 4 core., 4gb ram onboard video.
Now for the question. i got thinking today and realized i hadnt installed any chipset drivers etc. I look in device manager and all the drivers are from microsoft and from 2006 ? So i go to gigabyte and get the win 7 download but all it installs is the graphic driver and usb filter driver nothing else. I try driver max and it says my drivers are up to date. What am i missing here.
I have been trying to install Windows 7 x64 Ultimate on a Gigabyte GA-P35-DS3 (rev 2.0)
and everytime i do the install fails and the install is then rolled back.
I currently have Vista x32 installed on Gigabyte Raid 0 (there's also an intel raid option but i've never used it). The Vista install runs fine and i've never had a problem.
When i try to install using the GA-P35-DS3 (rev 2.0) raid drivers from the Gigabytes site i get the usual microsoft grumbles about unsigned drivers but then the install seems to go OK from there until the install completes and reboots. At this point it errors out and reboots into the OS rollback install.
Does anyone know if this is an issue with this driver or does anyone have a link to another driver?
Im an owner of the M912M netbook with Windows 7 RC 7100. I bought recently a external network adapter (Rokland N3) based on the Ralink RT2870 chipset and i have a problem connecting it to the netbook.
Installed the software+driver that came with it on CD and when connecting the adapter Windows says "Driver didn't install etc. etc.". Tried a Windows 7 driver which came from Ralink for this chipset and says same thing. Also Windows Update finds the driver but everytime it tries to install it it comes with a error (80070002, to delete all temp files of the WU, done that but same) and doesn't install it.
Same adapter installed and works fine on different laptops, Sony Vaio VGN-A497XP with same Windows 7 RC 7100, Acer 4630Z with Windows Vista so it shouldnt be a driver or OS problem but something specific to the M912.
Contacted Rokland and they guessed that it should e conflicting with the internal adapter so i removed it together with its driver but nothing.
I thought this was going to be an easy fix, but...Quick Setup: Motherboard is a Gigabyte GA-MA770-DS3 version 1.0; I am setting RAID zero with two WD 160gig HDs. A Pioneer DVD drive and a Lite-On DVD drive. This is a 64-bit install.
I set the RAID config and cleaned the drives. Popped the Windows 7 install disk in my DVD drive and the install began. Set the language prefs and clicked 'Install.' Shortly after I get the following error...Load Driver
A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now. My first guess was not a CD/DVD driver but a RAID driver is needed. I tried using the latest RAID drivers from Gigabyte. I made sure I was using the 64-bit version of the drivers.
When installing the driver, Windows install responds with "can not find the drive." 'Drive' not 'driver.'
There are no drivers available for my two DVD drives. The standard Windows driver has always been sufficient. What driver is the install is looking for? Do you think I may have missed something in the RAID config?
I recently had to format my H/D however cannot find my original drivers disc. So I cannot connect to the internet to get drivers.Motherboard is a gigabyte-ga=81865gm-775Have tried the gigabyte site but cannot find the driver there
View 6 Replies View RelatedI have been reading for days and don't understand this. When I get a system built using all SATA drives...is the best setting in the bios AHCI?
I know the RAID setting requires drivers and IDE does not but how about AHCI?
Should I even use this setting? Does it require drivers or does Windows 7 have "generic" ones?
So I installed the Windows Seven RC x64 today on my desktop machine after having a great experience on my notebook.
Most things worked out just fine, but the onboard raid controller is giving me alot of trouble (I got two hard disks connected there, should be raid0?), my mainboard is a Gigabyte GA-P35-DS3 an this is SiSoft Sandras report on my disk controllers:
Browsing this forum I found severel interesting posts, for example I tested the drivers of Driver and I tried the mainboard drivers for Vista in compatibility mode, but nothing works. I also looked for the "ITE IT8212 ATA RAID Controller" drivers directly, but there was nothing concerning Windows Seven. After that I tried the Released: Intel Chipset Software 9.1.1.1014 but that still did not solve anything.
The Gigabyte Z77X-UD5H WB comes with a Wireless Adapter/Bluetooth PCIe card.
Atheros AR5BWB222. Gigabyte calls it a GC-WB300D
The driver is being reported as having an issue by a splat in device manager with the following message: Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52). The Card works fine in another system that also runs Windows 7 x64 Pro.
I have called Gigabyte, uninstalled and the reverse in safe mode also. Done everything I know. Why it works in one system and not this one is the key. Once it was seen to work on another system Gigabyte tossed me into the ditch.
I have tried drivers from the boxed CD and their site. The Bluetooth side of the card which uses its own drivers is OK.
Windows 7 X64 Pro SP1
Gigabyte Z77X-UD5H WB
Intel 3770K
Kingston 16GB 2133 Genesis RAM
Corsair 750Watt Pro Series
Sapphire 6850 GPU
Using Win 7 64-bit with AMD SATA drivers with a strange issue.
When this board boots up it does an AHCI initialization which shows the attached sata drives. After that, Windows 7 loads and runs without a problem. However, when I reboot Windows it sounds like the hard drives spin speed is slowing down then speeding up again.
It does this about 4 times then the computer shuts down. When the computer restarts and goes back to the AHCI init screen it now shows "S.M.A.R.T. Error", but Windows boots without a problem. If the computer is shut down (powered off) the next boot will not show the error.
I've had Windows 7RC 32-bit, and currently also have XP-64 and XP-32 partitions on this machine with no problems at all. If I set the machine to Native IDE instead of AHCI everything goes back to normal with no shutdown issues.
Any ideas?
What can I do to make my graphics card work perfect but not messing up the pc I have tried downloading the drivers got hold of various versions tried them but they kept on giving me the problem, with a black screen after window logo loading.
View 9 Replies View RelatedRecently my computer has been going haywire on a game and only does so for that certain game. Below is exactly what happens every so often and when I went to the game's support I had been told to update my drivers, using the Live Update 5 that you can DL for MSI computers, and below is also a screen shot of what the screen says and when I attempt to download one of them it will say download fail, would it be best to update the MB driver to see if it fixes the problem with the game? and if so, how would I go about finding and downloading them since Live update 5 will not work?
View 6 Replies View Relatedis there 865 vga driver fo windows 7 exist
View 2 Replies View Relatedi have troble my win is xp now i v intal win 7 but i cant find ny m.board driver.
View 3 Replies View Related