Upgraded the bios from F4 to F5 and no effect. Can't see any devices that I plug into these ports. Never liked the transfer rate on these ports when they were working.Very slow - like a standard USB port.
View 6 RepliesI have a Gigabyte motherboard that has just stopped working.Ive tested the PSU CPU RAM etc and they are all fine and the motherboard hasnt got any life at all for some unknown reason.the board is 11 months old and is being picked up by courier on monday and they said they will give me a refund.so in the mean time ive been looking at new boards as the one i have GA P41-ES3G seems to of been discontinued.y old board ran off DDR2 was Socket 775 Intel Q8400 Processor and its hard to track down boards that will take those components.I have seen one:- GIGABYTE - Motherboard - Socket 775 - GA-G41M-Combo (rev. 1.4)It says Rev 1.4 but the ones ive seen for sale either dont say what rev or say 1.2 or 1.3What are the differences in Rev and would it be a problem if its an older Rev i buy?
View 4 Replies View Relatedgetting Gigabyte g31 motherboard drivers
View 1 Replies View Relateddoes gigabyte ga-z77-d3h have a motherboard speaker built in
View 4 Replies View RelatedMy motherboard is Gigabyte GA-M61VME-S2.
On their site for windows 7 there is only the realtek audio drivers.
However, there are vistra drivers.
I installed windows 7 and the connection to the internet is working(on xp without the chipset drivers there was no internet connection).
Should I try to install the vista drivers or it is unnecessary? Everything is working ok as far as I can tell.
(I did installed the win 7 nvidia drivers for my graphic card)
I started everything up and entered my new OS disk,thenit says 'loading operating system...' for not even a second then goes on to say'system boot failure, insert system disk and press enter' I re enter the disk but then it says 'disk boot failure, insert system disk and press enter'. I don't know what to do, I've gone into BIOS and but the cdrom as the first boot device also but nothing seems to work.. everything is brand new and my motherboard is GA-970A-UD3 AMD type
View 4 Replies View Relatedi installed windows7 on my AMD anthelon and i am using s-series m61pme-s2 gigabyte motherboard. mydisplay driver and sound drivers do not support windows7.
View 2 Replies View RelatedMine is gigabyte g31 mother board it is taking too long time to install windows 7 or 8 into it , it will asks press any key to boot from CD\DVD and i pressed after that ,it will start loading windows files and logo will appear and it takes more than 3 minutes to show install windows and also after that it takes 3 minutes to show setup is starting up.
View 3 Replies View RelatedNoticed that Gigabyte has updated their downloads for my mobo EP35-DS3R to include Windows 7 specific items for 32-bit and 64-bit.
If you are running a Gigabyte board, might be useful to see if updated Win 7 downloads are available for you.
Just did a fresh install of Windows 7 Ultimate 64bit. Trying to install the motherboard chipset but got confused with these options. Which one do I install? Asetup or Setup? Motherboard is Gigabyte 880-GMA U2DH rev2.1
View 5 Replies View Relatedget sound and audio drivers for a gigabyte motherboard
View 2 Replies View RelatedI updated the bios to the latest version on a gigabyte GA-Z68X-UD3H-B3, using @bios application in windows. I have two disks in a RAID1 All was working fine but upon boot i was getting a message about enabling ACHI. Stupidly curiousity got the better of me and I eventually I said Yes. The next time i turned off i couldn't boot to windows. I went into the bios and noticed that the SATA was set to ACHI, but the bios still saw my RAID volume set up and everything appeared Normal, so i changed this setting to RAID.
it still wouldn't boot to windows - giving some message about not having access to the drive. i tried using the windows install disk but that gives error messages about RECENV utility not working, use chkdsk. it does show a drive as a volume D: (not C: interestingly) I have tried running repair and that doesn't work. I have tried chkdsk/r and that didn't help. In fact that degraded the Raid so i had to rebuild it, and now that is running Normal.
I also can't see any of my restores when i use the install disk.
I don't want to do a reformat and start again as there is data on there that is newer than my last backup.
So the options i am considering
1. remove the disks - place one of them in an external usb case and try to extract the data to save it - not sure if this is possible? and then do a clean install or try the below.
2. can i go back to the previous bios version? is that just a case of power off everything and remove the CMOS battery? and power back on?
3. go through with a new install of win 7 but don't format the drive and see if it just corrects any bad files.
Having installed win 7 I get the following error message
"The drivers for this device are not installed. (Code 28)
Data error (cyclic redundancy check).
To find a driver for this device, click Update Driver."
The mother board is a MSI K9N Neo V3
Any ideas on how to fix, have looked on MSi site and no updates have tried reinstalling and nothing works.
can i set gigabyte motherboard support with dd3 ram with amd Athlon(tm)64x2 4000+ processor
View 1 Replies View RelatedThe system is built around an Intel Dual Core processor, Asus P5K motherboard running 4gb DDR 2 RAM and an ATI Radeon graphics card. I installed a new copy of Windows 7 Ultimate on a recently formatted hard drive and added and an extra PCI 4 port USB card. My issue is that all of the 6 motherboard USB ports are powered (I can charge my phone from each one) but do not recognise any device plugged into them. Have tried keyboard, mouse, usb drive, camera and so on. Windows doesn't blink when anything is plugged in. When I plug a device into one of the 4 ports on my PCI USB card it installs new device and is working perfectly with absolutely no issues. I have done the following:
- Removed power cable and small lithium MBoard battery overnight,
- Flashed the bios several times upto and including the lastest version,
- Checked that USB is enabled in all BIOS settings,
- Downloaded and installed the latest Chipset drivers,
- Checked that Device Manager correctly sees all the USB ports and drivers. Everything is displayed with no errors or flags.
- Deleted and reinstalled all USB components.
- Windows is fully updated including the language packs.
With my 4 port USB card working perfectly am I to assume I have a biffed motherboard? I just cant understand that as they have power and are recognised in Device manager. And were working perfectly with Windows XP Pro installed previously.
I built a computer this past week. I am using a Logitech K270 and Performance Mouse MX with one unifying receiver. My problem is that whenever I plug the receiver into a USB port on the back of my motherboard the mouse cursor becomes jittery. Sometimes it will stop while I am using it, and then I need to lift the mouse to make it move again. However, if I plug the receiver into one of the USB ports on my case the mouse works perfectly.
Cpu: 3570k
Mobo: Asus p8z77-v
Gpu: HIS IceQ Radeon 7870
Case: Rosewill Thor V2
Psu: Rosewill 1000w
Keyboard: Logitech K270
Mouse: Logitech Performance Mouse MX
OS: Windows 7 Professional 64bit
I have a nice new Gigabyte X79-UP4 motherboard, and it is behaving for the most part, however the USB3 ports are not working. Drivers for the port installed fine (from the disk that came with the motherboard) however it is not recognizing either USB3 or USB2 peripherals.
Device Manager reports that the USB3 ports are fine -
I did download the newest Fresco Logic drivers from Gigabyte and the package failed on install with the message below -
Even though the installer failed I was able to go through Device Manager & update the drivers, but unfortunately there has been no improvement in functionality - USB3 and USB2 still do not work.
I have tried several installer packages, from different locations, and all have failed!
The audio jacks that came with the motherboard don't work. I've tried different speakers, restarted my computer etc. It doesn't appear under playback devices. It doesn't seem to appear under device manager either.
Here are some screenshots to illustrate my point:
Device Manager
Playback Devices
Here's the link to my motherboard's page: [URL]
I am building a simple HTPC/Media Center server box and I can't get the OS to install.The hard drives are seen in the bios screens, but when I go to try to install Win7 x64 the machine just hangs on the first Windoews screen. I tried to install a known working version of XP if I have and it reported back that no hard drives are installed[CODE]
View 2 Replies View RelatedI've wiped the HD, Prime tested the CPU, and Memtest + the RAM (all via UBD)
I've installed Windows 7 Pro x64 (which I would like to stay with, but I have the option to use x86).
I can install and get to the desktop, but whenever I restart I would get random BSOD; everything from memory errors to driver errors. However, another restart and everything fine. I download drivers from the Gigabyte site and installed the ATI display/chipset driver (restart BSOD, driver ACHI.sys?).
I upgraded the BIOS to F3 via QFlash(BSOD rdyboost.sys) Now I even tried to put in my win 7 disk and preform a repair and I get a NSFT.sys STOP 0x00000024. I've tried multiple different installs and wipes and now I'm getting a sector error in Boot & Nuke, but Seagate tools says everything is fine.
Final note for today. The HD I'm using was in a ReadyNAS Duo for 1 year and the last SMART check I did before pulling it from the unit said it had 2 unallocated errors, far below a damaged drive. I do not know what todo. I will try another wipe and install this time using the Gigabyte SATA drivers (preload) although why would the system be able to install with generic drivers if I needed to do this.
HTPC:
GA-MA785GPMT-UD2H (rev. 1.0)
- BIOS F3
Athlon II 245
- stock
G.Skill DDR3 1333
- stock
Seagate 500GB
Antec 380W PSU
I restarted my computer to return to the login screen and found i have no control of my mouse or keyboard.I have control before Windows loads (in Bios Settings).I have enabled and disabled in every combination possible for the settings of the USB in Bios Settings.I can not system restore. I have no control in safe mode.Basically if it deals with windows, i have no control. Only before windows loads.
View 3 Replies View RelatedI am not going to tell my problem or trouble but rather to tell what I had done based on what I found out from other responses to "related issues" subjected above.I just thought that I must do this for the sake of others, brothers and sisters in Jesus Christ wanted to go back to the threads that his but I am not that fond of using the search fields and somehow my google search results on this lappy is quite differ from the one i got on the usb-troubled lappy that i used to log into sevenforums. i have read through just about 10 of the related result on sevenforums but not one of them is the one i found out earlier.anyways, what i did was: uninstalled all usb listings in device manager and then just shut down the lappy, unplug all cables including power cable and went out for a smoke. a few minutes later, came back and plugged the power cord and turned on the lappy. and somehow, windows auto-install everything and since the lappy is wirelessly connected to the internet like always, it also download and install everything.then i plug the main cause of the problem (microsoft 5-button intelligent mouse) and wait for the driver update wizard to complete; and now everything not only seems working fine, BUT actually working fine now.
View 1 Replies View RelatedI have 3 USB ports but only one of them is working (OS Windows 7 64 bit.
View 2 Replies View RelatedIs there a repair site for Windows 7? I have severtal USB ports that do not work and also my headset and microphone uotlets do not work. I have seen similar requests on this blog but for XP.
View 5 Replies View RelatedLately some of the usb ports of my computer are not working properly: any device connected to them is not recognized. The problem appeared after I triedunsuccessfully to recover data from a damaged usb stick using umptool2090. This is how the ports appear from the Device Manager (it's in Italian, but it should be understandable):If I uninstall the usb controllers and re-install them automatically (using the device manager), the ports start working, but the problem reappears after rebooting. My motherboard is an Asus M2N78-LA (Violet6) and my operating system is Windows 7 home premium SP1. What can I do?
View 3 Replies View Relatedall my usb ports are not working. it is saying no driver found what do i do?
View 2 Replies View RelatedAll four USBs will not work at all. I recently bought a new mouse because I thought my other one was broken. No, It's the USBs.
View 4 Replies View RelatedI have a Western Digital 1 TB USB 2.0 that I have connected to a computer that has Gigabyte connection to my NAS which can handle Gigabyte speeds.I am only getting 30.1MB/s.Is there any settings I can do to windows so that it can send faster?
View 1 Replies View RelatedMy usb ports are working at all.No matter what i plug into both of my usb ports nothing happens. I have a Toshiba Laptop.
View 6 Replies View RelatedI have three USB ports on my Gateway laptop and none of them are working. I've tried un-installing them through the Device Manager, but the action gets hung up and I have to stop it (I've let it run for 10+ minutes) through the task manager. When I re-open the Device Manager the USB all the controllers are still there.
I bought an expansion drive because I wanted to back up my photos and other files. After I did that I was going to reinstall a clean version of Windows 7 as my laptop hasn't been working well lately.
USB ports would be greatly appreciated.
Both USB ports at my laptop (Toshiba Satellite C650, Windows 7 home premium, SP1, x64) stopped working after plugging in and unplugging several Garmin Forerunner 305 watches in a row. Everything looks all right in the device manage (no exclamations marks). I have reinstalled everything that has something to do with USB in the device manager, several times. Updated BIOS and used Windows update to get all the latest drivers and fixes.I have taken out the battery and let the computer "rest" for several hours without any power supply.I have tried to do some changes in registry key according to these instructions: USB ports suddenly stopped working in Windows 7 RC1 - Microsoft Answers (I managed to delete Lowerfilters).And of course I have tried with different USB-sticks, mouses, external hard drive etc. There is no power in the ports. When I plug in my Garmin Watch it does not charge.I installed and tried two registry cleaners (TweakNow RegCleaner 2011 and Glary utilities). After using them I got some hope back when I got a bit of reaction from one of the ports. A few times after plugging in something it started to install the driver but stopped immediately - telling me that the driver cannot be installed because the device is not plugged in (while it is).
I consider to do system restore to factory settings but before that I have to copy and save everything which is a bit complicated since non of the ports is working. If the restore to factory settings does not work, then I believe there is a problem with the hardware and I have to get the motherboard replaced.