I recently had to format my H/D however cannot find my original drivers disc. So I cannot connect to the internet to get drivers.Motherboard is a gigabyte-ga=81865gm-775Have tried the gigabyte site but cannot find the driver there
View 6 Replies
What can I do to make my graphics card work perfect but not messing up the pc I have tried downloading the drivers got hold of various versions tried them but they kept on giving me the problem, with a black screen after window logo loading.
View 9 Replies View Relatedi have instal windows 7. but Ethernet driver was not installed
View 2 Replies View Relatedi've got a problem with my ethernet driver, i have tried many ways to fix it like re-instaling the driver,updating, installing the driver from manufacturer's website,system restore,scanning but all of these failed to fix it... windows tells that there is a problem with the network adapter driver but when i open device manager, it says that the driver is working correctly...
View 3 Replies View RelatedI have a Western Digital 1 TB USB 2.0 that I have connected to a computer that has Gigabyte connection to my NAS which can handle Gigabyte speeds.I am only getting 30.1MB/s.Is there any settings I can do to windows so that it can send faster?
View 1 Replies View RelatedI started everything up and entered my new OS disk,thenit says 'loading operating system...' for not even a second then goes on to say'system boot failure, insert system disk and press enter' I re enter the disk but then it says 'disk boot failure, insert system disk and press enter'. I don't know what to do, I've gone into BIOS and but the cdrom as the first boot device also but nothing seems to work.. everything is brand new and my motherboard is GA-970A-UD3 AMD type
View 4 Replies View RelatedIm trying to install software for my new M6880 mouse but I can't :@
When I run setup I get this error: Could not open the file named: C:labl bla bla bla SETUP.INF
Im trying to install software for my new M6880 mouse but I can't :@
When I run setup I get this error: Could not open the file named: C:labl bla bla bla SETUP.INF
I have just bought two brand new WD 500 GB RE4 HDD's and connected them coorectly for RAID 1. I have changed the BIOS and Pressed Ctrl+F to create the RAID and this has been successful. When installing Windows you obviously get to the aprt where you need to load the floppy drivers to locate the drives...
I have downloaded ever driver from the Gigabyte support drive and loaded them onto a USB, not one driver can be seen when the USB is "Browsed" too...
How important is it that the drivers are on a floppy, as I do not have a floppy drive or access to a floppy and drives. Also what driver should be downloading as I tried the 3.2.1540.17 one and that was not seen, so I just downloaded them all in an attempt for success.
I have been running win 7 for about 6 mths now dual boot with xp. I have done a fresh install and got rid of xp and running win 7 straight up. My system is a Gigabyte AM2+ with a phenomII black edition 4 core., 4gb ram onboard video.
Now for the question. i got thinking today and realized i hadnt installed any chipset drivers etc. I look in device manager and all the drivers are from microsoft and from 2006 ? So i go to gigabyte and get the win 7 download but all it installs is the graphic driver and usb filter driver nothing else. I try driver max and it says my drivers are up to date. What am i missing here.
I have been trying to install Windows 7 x64 Ultimate on a Gigabyte GA-P35-DS3 (rev 2.0)
and everytime i do the install fails and the install is then rolled back.
I currently have Vista x32 installed on Gigabyte Raid 0 (there's also an intel raid option but i've never used it). The Vista install runs fine and i've never had a problem.
When i try to install using the GA-P35-DS3 (rev 2.0) raid drivers from the Gigabytes site i get the usual microsoft grumbles about unsigned drivers but then the install seems to go OK from there until the install completes and reboots. At this point it errors out and reboots into the OS rollback install.
Does anyone know if this is an issue with this driver or does anyone have a link to another driver?
I have vga driver for win xp, but it doesn't work on win 7. My motherboard is Gigabyte GA-8SIMLH. What can i do now ?
View 2 Replies View RelatedIm an owner of the M912M netbook with Windows 7 RC 7100. I bought recently a external network adapter (Rokland N3) based on the Ralink RT2870 chipset and i have a problem connecting it to the netbook.
Installed the software+driver that came with it on CD and when connecting the adapter Windows says "Driver didn't install etc. etc.". Tried a Windows 7 driver which came from Ralink for this chipset and says same thing. Also Windows Update finds the driver but everytime it tries to install it it comes with a error (80070002, to delete all temp files of the WU, done that but same) and doesn't install it.
Same adapter installed and works fine on different laptops, Sony Vaio VGN-A497XP with same Windows 7 RC 7100, Acer 4630Z with Windows Vista so it shouldnt be a driver or OS problem but something specific to the M912.
Contacted Rokland and they guessed that it should e conflicting with the internal adapter so i removed it together with its driver but nothing.
i'm having trouble installing the latest catalyst drivers.the package fails and keeps knocking me back with the INF file was not find.ive installed the package to a folder and tried to navigate via system and update the driver file but get an error regarding the information set or element settings (and the driver doesn't update.my graphics card is still working so to speak, i can enter games although my system crashed 2 hrs ago from dxgmm1.sys and thats what prompted me to uninstall and reinstall my drivers but im running into alot of problems.i've also tried reinstalling through safe mode and still not working (ive used driver sweeper to make sure it's a fresh install)
View 4 Replies View RelatedI thought this was going to be an easy fix, but...Quick Setup: Motherboard is a Gigabyte GA-MA770-DS3 version 1.0; I am setting RAID zero with two WD 160gig HDs. A Pioneer DVD drive and a Lite-On DVD drive. This is a 64-bit install.
I set the RAID config and cleaned the drives. Popped the Windows 7 install disk in my DVD drive and the install began. Set the language prefs and clicked 'Install.' Shortly after I get the following error...Load Driver
A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now. My first guess was not a CD/DVD driver but a RAID driver is needed. I tried using the latest RAID drivers from Gigabyte. I made sure I was using the 64-bit version of the drivers.
When installing the driver, Windows install responds with "can not find the drive." 'Drive' not 'driver.'
There are no drivers available for my two DVD drives. The standard Windows driver has always been sufficient. What driver is the install is looking for? Do you think I may have missed something in the RAID config?
I have been reading for days and don't understand this. When I get a system built using all SATA drives...is the best setting in the bios AHCI?
I know the RAID setting requires drivers and IDE does not but how about AHCI?
Should I even use this setting? Does it require drivers or does Windows 7 have "generic" ones?
So I installed the Windows Seven RC x64 today on my desktop machine after having a great experience on my notebook.
Most things worked out just fine, but the onboard raid controller is giving me alot of trouble (I got two hard disks connected there, should be raid0?), my mainboard is a Gigabyte GA-P35-DS3 an this is SiSoft Sandras report on my disk controllers:
Browsing this forum I found severel interesting posts, for example I tested the drivers of Driver and I tried the mainboard drivers for Vista in compatibility mode, but nothing works. I also looked for the "ITE IT8212 ATA RAID Controller" drivers directly, but there was nothing concerning Windows Seven. After that I tried the Released: Intel Chipset Software 9.1.1.1014 but that still did not solve anything.
Just did a fresh install of Windows 7 Ultimate 64bit. Trying to install the motherboard chipset but got confused with these options. Which one do I install? Asetup or Setup? Motherboard is Gigabyte 880-GMA U2DH rev2.1
View 5 Replies View RelatedThe Gigabyte Z77X-UD5H WB comes with a Wireless Adapter/Bluetooth PCIe card.
Atheros AR5BWB222. Gigabyte calls it a GC-WB300D
The driver is being reported as having an issue by a splat in device manager with the following message: Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52). The Card works fine in another system that also runs Windows 7 x64 Pro.
I have called Gigabyte, uninstalled and the reverse in safe mode also. Done everything I know. Why it works in one system and not this one is the key. Once it was seen to work on another system Gigabyte tossed me into the ditch.
I have tried drivers from the boxed CD and their site. The Bluetooth side of the card which uses its own drivers is OK.
Windows 7 X64 Pro SP1
Gigabyte Z77X-UD5H WB
Intel 3770K
Kingston 16GB 2133 Genesis RAM
Corsair 750Watt Pro Series
Sapphire 6850 GPU
Using Win 7 64-bit with AMD SATA drivers with a strange issue.
When this board boots up it does an AHCI initialization which shows the attached sata drives. After that, Windows 7 loads and runs without a problem. However, when I reboot Windows it sounds like the hard drives spin speed is slowing down then speeding up again.
It does this about 4 times then the computer shuts down. When the computer restarts and goes back to the AHCI init screen it now shows "S.M.A.R.T. Error", but Windows boots without a problem. If the computer is shut down (powered off) the next boot will not show the error.
I've had Windows 7RC 32-bit, and currently also have XP-64 and XP-32 partitions on this machine with no problems at all. If I set the machine to Native IDE instead of AHCI everything goes back to normal with no shutdown issues.
Any ideas?
my laptop is hp pavilion g6 notebook pc >> my problem is with the ethernet controller driver and the network contoller driver >> after i had install a windows 64 bit i couldn't find these drivers.
View 8 Replies View RelatedI have completed my 1st build and I was mighty proud. However I cannot get the ethernet drivers to install so I cant get internet. I have downloaded the latest drivers off the website and I get a error when installing them.
View 2 Replies View RelatedOn a Dell desktop with pre-installed Windows 7, due to a bad HD, I bought and installed a full retail version of Windows 7. Now the ethernet port is dead.
View 8 Replies View RelatedMy laptop is from Toshiba, model L650 PSK1JA OK3017. Here's Toshiba's driver page for my device: Support :: Toshiba ::Computers, Laptops/Notebooks, Tablets, Televisions, DVD and Blu-Ray Players, Camcorders, Storage, Accessories, and moreI recently purchased a blank hard drive along with a copy of Windows 7 Ultimate 64 bit. I've installed all drivers listed on the page for a 64 bit system but when I try to install the "Intel Wireless LAN Driver (For Intel Model Only)" driver or Proset driver, the driver extraction begins, ends, but when the setup is meant to run, nothing happens. I've redownloaded it and attempted to install it twice to no avail.Basically, I cannot connect to the internet and Windows cannot detect my network adapterI can't call Toshiba support because their operating hours are when I'm at school.casionally, when I try running the driver I mentioned before and the extraction is complete, when I select "No" as to whether I want to run the file, Windows gives me the error: "Archive Extractor -- Error occured in system module [-135]".
View 1 Replies View RelatedPreparing to custom install Win 7 but "adviser" recommends downloading a IC Plus Ethernet Adapter 10/100 for Window 7, and it seems one is not available, closer examination of the mini disc reveals a CNET driver (for XP) (and works) but again, no Win 7 driver available at CNET or on mini disc.
And I keep getting directed to some driver all inclusive salesmart, I am upgrading O/S to avoid them in the first place.
I did a windows 7 clean install on my HP Mini 210 4051 nr as part of creating a dual boot with Ubuntu. In Linux the internet works fine, but in Windows 7 it does not. In the device manager I see yellow flags over the ethernet and network controllers. Code 28 (My model does have an ethernet port).
Because the machine cannot connect, I downloaded all the related drivers (everything from the network tab) from the HP website for my model with another computer and then put them all in a folder on the Mini's desktop via USB. When I try to install the drivers through the device manager, and direct it to that folder, it says it finds nothing usable.
Here are the IDs
Ethernet Controller
PCIVEN_10EC&DEV_8136&SUBSYS_338D103C&REV_05
Network Controller
PCIVEN_1814&DEV_5390&SUBSYS_163610C&REV_00
My D-Link router is not working virgin want me to connect my laptop to the router with the ethernet cable,but it appears I do not have an ethernet driver. I need to download one but from where? I have tried system restoring but it hasnt brought it back and they say they cant fix my router until the driver is there. my other driver are realtek and I am using windows 7.
View 3 Replies View RelatedYesterday I completely wiped my computer down to the bone, and found out that my ethernet driver was removed. I am currently connecting with a rosewill wireless usb, although I do want my ethernet card back. The usb gradually makes my internet slower and does occasionally make my computer crash. I am currently using a HP Pavilion Slimline s5710f PC and it is running on Windows 7.
View 8 Replies View Relatedfrom wher can i download hp ethernet cable driver??
View 2 Replies View RelatedI've installed the original Windows 7 Professional x64 on my desktop and it doesn't install the ethernet controllers!!! i've tried everything, even installing the ones on GIGABYTE's website. Btw, my motherboard is a P35-DS3L rev. 2.0, tried a lot of drivers, no one seems to work! what am i possibly doing wrong???
View 10 Replies View Relatedi downloaded a new version of nvdia drivers but it is not compatible. so iuninstalled it..now my pc arising a problem that "current ethernet driver doesn't support -nvidia forceware network access manager"
View 1 Replies View Related
