WINDOWS 7, hard drive flashes once per second and hard drive is running all the time for days now. Have eliminated everything I can think of that could cause this, but on it goes.
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
So, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
I have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
I have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
Me and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
I have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?
I have a USB Webcam 6.1.7601.17514 from Microsoft installed on a Fujitsu Laptop (Windows 7 ) and I want to copy and install it on another Fujitsu laptop (Windows 7).The other laptop the camera is not working and there is no webcam driver installed.
My mouse pointer is flashing busy everytime it shows the regular icon and no problem noted while inside textbox.I performed a full scan. The antivirus installed is McAfee and I also have MBAM installed in my system.System is windows 7 6gb RAM Intel core i5 processor. Mine is comparatively a new one. I read a thread for a similar issue and ended up disabling services.msc. But now also am facing the same issue.
I have window seven Hp pavilion 64 bit, 4 ghz sp1, computer and I have never had so many problems. I have done at least 4 system restores. The screen flashes, I have adjusted monitor display size. Computer will not complete a backup. I hear my dvd drive making noises. The computer is slow. Could not install adobe reader until last night. My last index number was 3.3 to 2.6 and now it says 3.3. I don't know what my default browser is, firefox, and windows tell me they are not.
How do I find out if I have malware, virus and or browser is jacked? My prairie form cleaner shows me my computer is collecting large files or daily activity. Also, I want to know if my computer is recording, how can I tell? I want to make sure the back door is closed. I have scanned with Norton, Windows Defender, Avast and AVG over the time and I have had at least 4 items to return. 3 items were removed 1 quarantined and I have done restores since then.
I have an HP desktop with an Asus MB #M2N68-AM SE2.Sometimes it boots normally but lately it may be as long as 10 to 15 minutes to get past the Windows l7 flashing logo.
I'm planning on buying an Asus Zenbook UX32VD soon and it comes with a standard 7200 rpm drive instead of an SSD. So because of that i want to upgrade it to an SSD drive.But I also want to have the same windows thats installed moved over to the new drive. The drives i've looked at all have data migration tools and one comes with norton ghost but i've never had to do something like this before where i didn't have an optical drive and a windows disk for a reinstall so i'm looking for some help here before i order everything and then do something stupid.i don't mind if i have to lose whatever settings and data i might have setup already, but i just want to make sure i have the same windows and the additions it comes with moved over to the new SSD drive.
I have tried numerous times on my PC to install Windows 7 onto my Sata Drive to no avail. Yet as soon as I plug in my IDE HD it installs fine.I have unplugged all external peripherals USB and internal Card Reader. Set my Bios ok as it sees both the Hard Drive and DVD fine (Both in the bios and during selection of hard drive during windows 7 installation). Yet when I come to install it, it craps out at a random percentage saying cannot read from source or worse yet it crawls so slow through the percentages (I really don't think Windows 7 should take 6 hours to get to 15%!!) Yet both the hard drive and dvd are fine and the disc works great on my other PC without the sata drive in.
My motherboard is a Biostar G31-M7 TE with latest bios now what is odd is that I recently updated the BIOS to the latest one so does my problem come from here or was it always going to be a problem on this board? Also when I do have Windows 7 installed on the IDE drive when I plug in ther sata drive inside the whole system goes belly up (from freezes when transferring large files to just not seeing the drive)
I have an Alienware M14x R1 with a SSD - Crucial M4 in the main spot and the stock HD in the optical drive. I have never had any issues with any of this stuff before this clean install - and I have done clean installs previously. I also used Parted Magic to Secure Erase my SSD and HD before install.I am experiencing some pretty frustrating problems:
1. I have NO INTERNET CONNECTION (everyone keeps telling me to install drivers...how can I do this without internet connection??)
2. Windows is not recognizing my second hard drive in the optical drive even though it did when I was installing and showed it at the section where you can add new partitions etc
3. My display adpater is not working as I have a 1600x900 screen and I can only go up to 1024x768...
make a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?
My system pass POST flashes the Windows scroll across the bottom and then stops loading. Waits exactly +/- 8 Min, then finishes loading. Tried everything.
I recently installed windows 7 home premium 64 bit, previous OS was Vista home premium 32 bit. My desktop is an HP pavilion d4650y. I have the OS loaded on my main HD which is a SATA.
HD & DVD drive worked perfectly before on vista. I tested both devices on another pc with XP and they work fine. I've triple checked the connections but still the devices are not recognized by Windows 7. I've also tried renaming the HD & changing the drive letter, but still no luck.
Both drives are connected to a PCI E card, and are set to cable select, on separate cables. In the BIOS both drives show up. In disk management they do not show up at all.
My HD is a western digital 250 gb EIDE, and the DVD drive is a IDE Pioneer DVD burner (secondary disc drive).
Win 7 on Dell Vostro 64 bit os sp1.Anti Virus: Norton Security Suite 5.1.0.29, Ie 9 is where the issue started if opened it would close instantly. the 64 bit version is / was fine. Opening with no add ons had no change. I uninstalled IE9 only to find the problem stayed, IE8 32 crashes and IE8 64 bit works fine. The no add on for IE8 has no change. Running either as "Runas Admin" no change. Also resetting IE had no change. Logging in as Administrator and running it had no change. Creating a new user and attempting to run it had no change. One other issue that might be related I can not uninstall Java 6 update 25, it states the MSI is missing and I cant find a copy any where to remove or re install and remove.
I have Windows 7 (64bit) and for a while now, when I'm playing Solitaire and click on the Deck to draw a card, sometimes the Solitaire window will flash and in the taskbar, the Solitaire icon moves/shifts to the right briefly. If I click on the deck a second or third time, it'll be just fine. I've also seen the same issue when playing Chess.
I thought it might be an issue with the window getting/loosing focus but I'm not sure what or where to check...any ideas?
I just completed a fresh install of Windows 7 on my Dell XPS 17. For some reason, when the computer is on battery power and is idle, the screen will flicker. Basically if I am on battery power, the moment I stop typing or using the mouse, the screen will flicker after about a second. Then as soon as I resume using the computer, it will flicker again. It will also flash at random other times... Only when on battery power (so far).As I mentioned, I just completed a fresh install of windows 7 after reformatting my drive because of virus issues. I did have some issues with getting drivers installed and still have have that are missing (see attached photo). I have not been able to get these drivers to install. One thought I had is that the screen issue may be a result of improperly installed graphics drivers? Just a thought. System Info:
SYMPTOM: a very brief total blanking of the firefox window--just the webpage area--not the tabs, menu, borders, etc.
If I use the scroll bar instead of the mouse, no problem. If I turn off aero, then I can use the mouse scroll wheel and no problem. Browse with IE--no problem either.
Something wacky going on with the mouse driver?
This issue has happened with several Nvidia drivers put out in 2009.
Anyone else having this trouble with Firefox and scrolling with mouse wheel, with Aero enabled? If so, what video card do you have? Mine is an Nvidia 6800.
Apologies if this has been covered, I have tried looking but can't find any previous mention, although having used this excellent forum for a few months this is my first posting, so sorry if I am not doing this correctly !
I have carried out a clean install of Win 7 Home Rremium (retail full version) on a new hard drive. The problem that I have noticed is that when you are in Computer Management, you can view everything OK apart from Disk Management when you view this it works OK but when you then try to view any other menu (Event Viewer, Device Manager etc.),
the text on the screen flashes like it was refreshing, however it continues to do so until you exit. If you then go back in again and select anything other than Disk Management it works OK until you select Disk Management (which works OK), but on selecting another menu, the screen starts flashing again.
This only happens when you go from Disk Management to something else.
I have reinstalled my old Vista hard drive and everything works OK, so I dont think that it is a hardware issue, but something with Windows 7.
Out of the blue, my interent will stop working and flash at me. The flashing occurs on internet explorer 8. Google chrome will not work at all. I have reinstalled internet explorer and set everything to default settings. I have tried repairing my connection and nothing seems to work.
I have a folder in My Documents that doesn't open up (other folders in my computer works fine). I double click on it and it makes that clicking sound and flashes for a sec but nothing opens up. I can only look at what's in the folder by using Word 2007 then open and select all files. I scanned it with AVG and there's no virus. Most of the stuff in there are not downloaded, it's mainly documents which I typed on this computer, and the few things that have been downloaded I have opened before and there never seemed to be a problem until recently. I made a copy of the folder to an external hard drive and funnily that opens up. I tried to delete the original folder in my documents but it says folder in use and won't let me delete it.
System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 32 bit Processor: AMD Turion(tm) X2 Dual-Core Mobile RM-72, x64 Family 17 Model 3 Stepping 1 Processor Count: 2 RAM: 3581 Mb Graphics Card: ATI Radeon 3100 Graphics, 256 Mb Hard Drives: C: Total - 293563 MB, Free - 84065 MB; H: Total - 953867 MB, Free - 415416 MB; Motherboard: TOSHIBA, Portable PC Antivirus: AVG Anti-Virus Free Edition 2012, Updated and Enabled
I bought this laptop nearly 2 years ago and it's been giving me tons of issues as of late, It flashes and will occasionally crash during games (ex: DOW2, Global Agenda, ME2) The flashing will also happen occasionally happen outside of games and is nearly guaranteed a BSOD within 15 minutes or less from World of Warcraft
When I'm playing certain video games, like Battlefield Play4Free, sometimes, my computer lag spikes and then my screen flashes black. Then the lag's gone. After that, in the tray notification area, I get a message saying, "Display driver Igfx stopped responding and successfully recovered".