Update For Client Beta For X64-based Systems (KB963660) Error
Feb 24, 2009
Update for Windows 7 Client Beta for x64-based Systems (KB963660)
Install this update to resolve issues with Media Player or Media Center for Windows 7 Beta where multimedia codecs are not functioning on or after 15 March 2009. For complete details of this update, see KB963660. After you install this item, you may have to restart your computer. This update is provided to you and licensed under the Windows 7 Prerelease License Terms.
An update is available that will replace certain audio and video codecs that expire in prerelease versions of Windows 7 on March 15, 2009
Yesterday update installing fail with error 80070643. Tryed manually also install it but no luck, any suggestion how to debug it why it fails or solution for this?
View 9 Replies
ADVERTISEMENT
Jun 29, 2011
I'm using Windows 7 64bit Professional and failed to update x64-based KB2552343. Reported error is Code 800B0100. I strictly followed the solution mentioned What is the System Update Readiness Tool? But nothing changed, still the same error.
View 2 Replies
View Related
Jan 22, 2012
How can I get rid of four beta programs that Update Checker shows need to be installed?
View 5 Replies
View Related
Feb 15, 2011
After I updated my Internet Explorer 9 Beta, the items in my Start menu are no longer expandable and I cannot click on them. I am not refering to the All Programs, but the items in the blue bar such as Documents, Favorites, Recent Items etc. Clicking on the main item (ex: Favorites) will list my favorites and folders, but I cannot click on any of them or expand the items inside. Oddly enough, I can expand and click on Favorites from within IE9.
A shutdown, restart, disk check have all failed to fix the problem. As I stated, this started immediately after I did the latest update to my IE9 Beta dated 15 Feb 2011.
View 1 Replies
View Related
Dec 22, 2012
i have been playing Open Beta-free-to-play, browser-based games with no problems until the other night i turned off the computer and it down loaded windows updates .Now no beta games will load and run on my laptop they just freeze the browser and all tabs open i have to shut them down using the small box at the bottom.it must be something to do with the downloads as i have another computer that they will load on but this is too old and slow to run them on.
View 1 Replies
View Related
Jan 28, 2011
After installing Firefox 4 beta, IE9 Beta and deleting quarantined items from Malware Bytes. After system restarts it keeps going to the Configuring windows screen do not turn off your computer. It goes for a few minutes then reboots. It has done this numerous times...
View 2 Replies
View Related
Nov 25, 2011
Not very tech-literate but here is what I got (+ uploaded required files)
View 3 Replies
View Related
Jul 29, 2011
Recently, a Windows update arrived called Microsoft Security Essentials Client Update Package - KB2544035. Since then my computer started malfunctioning. Whenever, I try to install the update, everything goes fine, and then suddenly goes blank and the desktop returns (but the Windows update screen had closed). When I open Windows update, it shows that the aforesaid update is not installed. And when I try to open Microsoft Security Essentials shortcut on my desktop, the machine is not able to find it and asks to delete it. I can't even open Microsoft Security Essentials manually from Program files. Things return to normal on System Restore. But the Microsoft Security Essentials appears potentially unprotected and asks for a full system scan. But before the scan is complete the Microsoft Security Essentials screen closes and the desktop returns once again. And, once again, when I try to open Microsoft Security Essentials shortcut on my desktop, the machine is not able to find it.
View 8 Replies
View Related
Jan 30, 2011
I'm out of ideas. I've been running Win 7 on this machine for more than a year without issues in updating etc. Now it will not search or update/install critical items. I'm running Symantec (even tried turning the firewall off without any success). I get an error code 80072F7C. When I run hijackthis, I get an error message that my system denied write access to the Hosts file. I proceed with the scan but am unable to produce a log file. I've included a screenshot from the windows update error as well as the error I get when trying to run hijack this.
View 1 Replies
View Related
Oct 30, 2012
A while back, after successfully downloading and installing some updates in the Windows Update, it prompted me to restart the computer to finish the update installation process. However, I continued to use the computer for quite some time before restarting it, and then when it tried to configure the updates on the start-up screen, it showed that it was not successful in doing so. In the past, I noticed that this would typically happen when I did not restart the computer immediately (or within a short time) after the updates finished and I got the prompt to restart. I would have to go to Windows Update and do it over again, and then upon immediate restart, it would always work properly. But this time, it did not, and I keep getting the 8000FFFF error message instead.
Also, now, every time I start the computer, it shows that it's "Preparing to configure Windows... Do not shut off computer" (presumably the updates that never got completely and correctly configured) in the start-up screen... gets to 35%..fails... shuts down (screen goes black)... restarts again... tries to configure again, fails again, shuts down and restarts again... tries to configure again, fails again, and finally it apparently gives up and says "reverting changes" and finally goes to the desktop.I've looked at the answers in several threads at the answers.microsoft.com forum that were started by people with similar problems, and also tried several of the Microsoft "FixIt" files on the Microsoft site, but none of them worked. I'm using Windows 7 Home Premium.
View 8 Replies
View Related
Feb 12, 2011
I am new with Win 7 and am not very experienced. When I tried to write to a forum administrator I get the message "cannot perform this operation because the email client is not properly installed". What can I do to fix this?
View 9 Replies
View Related
Jan 28, 2012
My laptop is almost unusable because firefox, explorer and chrome are constantly crashing. I don't know a lot about computers but have been trying to figure out what is causing the crashes. I tried uninstalling my antivirus avg and it did not help. I also uninstalled chrome and firefox and then added them back with no change. I checked my event logs and found dns client 1012 errors but did not know if that has anything to do with the browsers crashing.
View 1 Replies
View Related
Feb 23, 2010
I purchased an HP Pavillion All-In-One with Window 7 pre-installed on my computer. I successfully downloaded windows live mail. However when I try to send e-mail through my Verizon with msn mail account, an error message appears stating "email client not properly installed". If anybody has any suggestions, directions or help it would be greatly appreciated.
View 2 Replies
View Related
Nov 3, 2011
I have some new Windows 7 machines on my domain. I have an older program that's installed and it needs to allow users to write and excute files on the c: drive (root). I know this is not a good thing but it's just they way they wrote it. How can I accomplish this? I've tried a number of things already like disabling UAC and LUA in the registry. That didn't work.
View 5 Replies
View Related
Sep 7, 2011
I have a Toshiba laptop, using Windows 7 (64bit) with IE9. I use Gmail and have installed their Notifier. When I attempt to use a webpage link to send an email or document, I get the error message, "default email client not properly installed".I have no clue what this means or how to fix it, so I attempted to research it online.I'd like to keep this a simple as possible. Can anyone walk me through the steps? I think I'd like to use Google & not Windows Live (have no idea why though), then I heard Post Box Express was simple, then I was told to press 'options' in my Notifier, but that went nowhere.
View 7 Replies
View Related
Aug 10, 2012
I've been having problems for a while installing this client profile.
Here's the log of the action.
CBS Log: http://www.2shared.com/file/a_VbsVp0/CBS.html
Code: OS Version = 6.1.7601, Platform 2, Service Pack 1
OS Description = Windows 7 - x64 Home Premium Edition Service Pack 1
[code].....
View 2 Replies
View Related
Jul 13, 2012
On July 12th 2012, my computer installed updates. After rebooting and waiting for me on the login screen, I gave it a hard shutdown to check on the BIOS settings (for a little side project, in the end I did not save any changes). After booting and logging in again, I find that many services are not running. I ran a very thorough check for malware and viruses (took over 24 hours to complete), and still no solutions. I have uninstalled/reinstalled my Broadcom 802.11g Wireless Driver several times.
I now look in the Event Viewer and find that the DHCP Client service is not running! It is set to automatic start in Services.msc, but when I try to manually start it, it gives me error 1075 (some dependencies do not exist or are marked for deletion). Running ipconfig, I notice that my system is using an APIPA-formatted address (169.254.x.x), indicating that the computer couldn't find a DHCP server.
My Event Viewer is peppered with:
Event 7003, Service Control Manager
The DHCP Client service depends the following service: Afd. This service might not be installed.
Event 7001, Service Control Manager
The WinHTTP Web Proxy Auto-Discovery Service service depends on the DHCP CLient service which failed to start because of the following error: The dependcy service does not exist or has been marekd for deletion.
And that keeps repeating many times in a minute (about 30-40 cycles of it).
View 6 Replies
View Related
Feb 17, 2012
I keep getting an error unable to reach server when using Nortel VPN client.The strange thing is sometimes I can connect and other times I get the above error. I have tried rebooting, even reinstalling and the problem comes and goes.
View 3 Replies
View Related
Dec 15, 2012
seeing as it had infected my services.exe, part of the fix was to get a new copy of it, or something around those lines; this will come in to play later, I think. Anyway, its been a LONG time, my last update whenever I try running windows update, it runs for a bit and tries to receive the updates, but then stops and displays a message saying it failed to update, and gives me the error code of 80246008. I've looked this up, and I see that it possibly has something to do with the background intelligent transfer service.
View 8 Replies
View Related
Aug 28, 2012
I can't copy to C because of that error.Even though I am checking internet to find fixes, I wanted to get your advices about it.System is 7 Ultimate x64.What does this command mean:
takeown /f c: /a /r /d y
View 1 Replies
View Related
Dec 17, 2012
I want to build an inexpensive but not junk computer. AMD was suggested to me and it sounds good but I have no source of information except from you folks.Could you help me find an inexpensive motherboard for this CPU? On board audio and video would be ideal and USB 3.0 and maximum of 8Gb of memory is a must. What confuses me is that the CPU calls itself AM3 but when I do a search I only find AM3+. I'm not a computer dummy but I'm not up on AMD.
View 9 Replies
View Related
Sep 27, 2009
I'm actually running 7 RC(7100) on my kids ECS 661FX-M7 mobo, and decided to run the 7 Advisor.. it came back with "Go to the mfgr website to d/l the latest driver.." for the SiS 900-based PCI-Fast Ethernet, and also should update the RealTek AC'97 audio driver. As I already have 7 running ok on this, what should I do about these recommendations?
View 6 Replies
View Related
Nov 12, 2009
Where i found the drivers to SiS 900-Based PCi Fast Eternet driver to Windows seven?
View 9 Replies
View Related
Oct 19, 2011
Windows 7 Home Premium 32bit. I had set up daily scheduled restore creation points, only to find that none had actually been created, when I tried to restore. I now have a non-working microphone. The schedules were working some time back, I am sure.....however, I have it set to work whether I am logged in or not. I cannot see any restrictions that would stop it.
Triggers are : time based.
Action :"start a program c:program filesdeltacaddeltacad.exe" (browsed, not entered"
Conditions: Only when on 240V power
Settings: Allow task to be run manually
Stop the task if it runs longer than 3 days
If the running task does not end when requested, force it to stop.
History shows repeated successful completions. Taskeng.exe is trusted in my security system (Comodo) and is running as a programme. Task Scheduler is shown as a Service. I tried scheduling the running of a simple drafting programme that I have (deltacad.exe). The time came and went and nothing appeared to happen. I ran it manually using SCHTASKS.EXE /RUN /TN "task name".
A very brief CMD window opened, and again it looked as if nothing had happened. However when I ran Process Explorer, there were 3 issues of the programme running: apparently one from the scheduled run and the others manual. None of them showed a GUI onscreen, and if I asked to bring the window to the front in Procexp, the option was greyed. running the programme itself, by actually activating it in Windows, resulted in a successful load and run.
View 2 Replies
View Related
Aug 24, 2010
I have a crashed Lacie network storage device, something in it's networking board is fried. It's comprised of 2 separate HDD's, both 500gig. I was afraid they were going to be stripped but it appears they hold their own complete files. I was able to look at the files through a file recovery program on Hiren's bootdisk. Said program was unable to keep file structure however. It seems theres no way to activate it to be read as a disk in windows. Computer management reads both of the disks as having 5 small partitions and a large (476gig) partition on it. No real way to look into that partition though?A couple other programs analyzed the disk and tell me it's 'linux native'. how to pull the files as well as folder structure out of it?
View 1 Replies
View Related
May 29, 2012
I have followed the instructions to search for files in Windows 7 but have found the process very slow and the results bring up lots of irrelevant files. Find a file or folder. By comparison the search companion on XP was much faster and got more relevant results based on file name. If that didn't work there was the option of searching for text within the file. For example I know inside a folder there is a sub folder with the file I am looking for and I know part of the name. Is there a way to make Win 7 search for results based only on the file name? In most cases that would be a lot simpler. Otherwise win 7 will look in the contents of the file which is a time waster.
View 9 Replies
View Related
Nov 16, 2011
I have three computers, one desktop (what my listed specs are for), a laptop, and a netbook. Each are running some version of Windows 7 (Ultimate x64, Home x64, Home x86). On each computer, if I minimize a connected AIM, Yahoo, or MSN account.. Also any Telnet connected windows/Telnet based platforms that are currently connected to a server.. After a good 2-4 minutes of being minimized, all programs are disconnected. At first I thought it was an internet problem, but that isn't the case (program(s) run fine without any hiccups as long as its an active window).
View 2 Replies
View Related
Apr 3, 2012
I am looking for a small cloud based system that would allow the following activities:Finances (Buy Price, Sell Price, Profit etc..) Notes Section for people to share their thoughts Plus and other features that may be possible.I don't mind if it is hosted on a secure site or hosted on a server at someones home and made available to others (Would need making secure somehow).
View 5 Replies
View Related
Aug 10, 2012
This seems like a basic concept, but I can't quite figure out how to make it happen.In a domain environment with Windows 7 systems, I want to create a shared folder that all domain users have access to. However, when any domain user accesses the share, they should only be able to access certain subfolders.For example, assume the shared folder is \servershareme, and it contains subfolders aaa, bb, ccc, and ddd. Further assume that there are three domain users: user1, user2, and user3. How can I allow user1 to browse shareme, but not open any of the subfolders; allow user2 to browse shareme and also open any of the subfolders;allow user3 to browse shareme but only open subfolder aaa?
View 6 Replies
View Related
May 29, 2012
I am looking for a way to create or write a script that will create folders with movies title and date and save empty folder in my Hard drive ?
So Example:
C: My Documents
Movies
300
Cars
etc....
View 1 Replies
View Related
Sep 10, 2011
I have two Dell All in one computers, one is a older 32 bit system and the newer one is 64 bit. Please tell me what the difference.
View 3 Replies
View Related
