I keep getting an error unable to reach server when using Nortel VPN client.The strange thing is sometimes I can connect and other times I get the above error. I have tried rebooting, even reinstalling and the problem comes and goes.
View 3 RepliesI got following error when I tried to connect by Nortel VPN 10.01.052
View 1 Replies View RelatedI am facing problems with the Nortel VPN client 10.04.016. It says "Activating VPN adapter failed".
View 4 Replies View RelatedI found this error logged in event viewer and would like to know its consequences, seriousness and solution.Win Seven 64 bit laptop with original OEM applied with SP1. [code]
View 9 Replies View RelatedMy internet isn't working too well, it shows great signal strength and says its connected but won't let me access the internet. It works if I reset the router but I keep having to do this as it only works for a limited amount of time sometimes for 5 minutes sometimes for 5 seconds. I keep getting this message when I try to access the internet:Error 105 (net::ERR_NAME_NOT_RESOLVED): Unable to resolve the server's DNS address.
View 1 Replies View Relatedits possible to use windows 7 Ultimate as a Server for thin client? I'll be using nc600 as my client terminal. The box says it supports windows 7. Is there any additional software I need to install on windows 7 server machine before I can use the client terminal?
View 4 Replies View Relatediam trying to create one domine in vm ware.i am install one server os 2008 and windows 7 client os.in 2008 installed adds.but in client pc can't support connect to network.
View 2 Replies View Relatedi have following problem. At work we have HP proliant ml350 server with windows server 2008 on it, 3x windows 7 client and 25x win xp sp2 clients. Network doesn't work, clients cant see each other, can't see server and server can't see them in network and sharing center. What could be a problem? Is ipv6 protokol on windows 7 obstructing a server or something else?
View 2 Replies View RelatedI am having an issue with offline files created offline syncing back to the server. I have set up a network share to be available offline on a client computer. All files are available offline without issue. Here is the issue however. If I set the folder to work offline any file I create in the folder when it is offline just disappears when the folder comes back online, there are no conflicts or sync failures reported in sync center. If I create a new folder offline the folder does sync back to the server. Any changes made to an existing file are also replicated back to the server once the share is back online. So the issue is only with newly created files when the share is offline. I have not been able to replicate this error on any other file server in our environment, However I have recreated the issue with multiple shares with multiple Win 7 clients on this file server.
Steps taken so far.
- Checked and reset permission levels on the share.
- Recreated new shares from scratch for testing.
- Disabled and enabled offline files on the client computer and cleared the offline cache.
- Check various registry entry settings.
- Disabled cashing on the File server.
- Tested with XP the issue does not exist with XP.
The clients are running Windows 7 Enterprise 64 bit. The File server is Server 2003 Standard 32 bit with SP2.
No mail server client came with Windows 7, that i can find, any recommendations?
View 7 Replies View RelatedWhen I try deploy the apps from server. I logon to client pc I have given all the rights but the apps doesn't appear on client pc desktop and all programs. Instead I have to go to network>serverpc>the share folder and double click in order for it to appear.
View 5 Replies View RelatedCurrently I'm building a server for a client who wants to run several copies of Diablo 3 on multiple Virtual Machines.Further, they also need the ability to use a hardware unity function.
View 5 Replies View RelatedMy problem is windows 7 hangs and freeze when access 2003 server Enterprise edition. This is not a small network, one of the biggest network.i have doubt on individual users on domain. before 2 months we had department wise users mean, for example Accounts@domainname.local. But after we created the individual users like john@domainname.local to all users. this is i believe the cause of problem. When we acess the server via the software it freezed for 5 seconds and then repeat to normal state. And after some time it hangs for 2 minutes.
View 5 Replies View RelatedTwo Windows 7 Home Premium 64-bit computers on the same network, the desktop has a printer shared that the laptop would like to access. The oddness began after I managed to get the laptop to access the desktop via Start > Run > \desktop, successfully connected up the printer via filesharing and tested it, but every time I restart the laptop it decides that it can't find the desktop any more.
View 2 Replies View RelatedI have been trying to mount a NFS shared to my Windows 7, but every time I try: mount \serverfolder *It says: Network path not found (error 53) I check the server and folder names and they are fine, so do you have an idea what can be causing this problem?
View 3 Replies View RelatedFor testing i have used a one month trial version of windows 2008 R2 server.Now i need format that windows 2008 R2 version and install XP sp2 over it. when i am trying to install it , with out any boot from Cd option it is directly jumping to 2008 server OS.
View 8 Replies View RelatedOn my laptop... The router signal strength bar says that i have internet access and then it says that i dont. When I try to open a webpage I get the Windows is unable to communicete with the DNS Server message.
View 4 Replies View RelatedNo way to download and configured access client and then my PC is not able to open IE8 and go to internet. I need to restore System and then open IE 8 and go to internet web.
View 1 Replies View RelatedI am currently installing a Win 7 box. When I first set things up I was able to get onto my Linux server in Network -> [server name], by logging in to Win 7 using the same user name and password set up on the Linux box.A short while later I am unable to connect - I get a dialog prompting me to enter a user name and password and a message "Logon failure: unknown user name or bad password". If I re-enter my user name and password the dialog comes back again.
View 1 Replies View Relatedhow can i receive , emails from craigs list ,it keeps telling me default mailclient not installed
View 2 Replies View RelatedWe have 2 x Server 2008 R2 domain controllers and 120+ Windows 7 x64 clients. We have a print server which runs Server 2008 R2.We have several other servers which also run Server 2008 R2. An issue occurs intermittently and apparently at random, whereby a client will be unable to resolve the host/computer name of the print server. When the issue occurs, we have confirmed the following: - The client has a valid IP address.The client DNS server addresses are correct. - The client can ping the IP address of the print server. - The client can resolve the IP address of the print server by using nslookup and the server�s FQDN. - The client cannot resolve the IP address of the print server by using nslookup and the host/computer name of the print server.The issue can occur regardless of which domain controller the client used to log on. - When the output of ipconfig /display is printed to a text file, many of the other servers in our domain are present in the DNS cache but the print server is not. After the ipconfig /flushdns command is executed, the client can resolve the host/computer name of the print server immediately.
View 2 Replies View RelatedI just upgraded my internet connection to 30 Mbps. After running more than 50 speedtests on my computer running windows 7, I came to the conclusion that there was something wrong because I was never exceeding 17 Mbps on speedtest.net! I called my ISP and they told me that if they send a tech he will plug a laptop directly to the modem and if he gets 30 Mbps I would have to pay.. while he kept talking I used my Iphone (which is connected to the 30 Mbps connection through my wireless router) and surprisingly got speeds between 21 Mbps and 23 Mbps ! I then realised my modem or router wasn't the problem.
I tried uninstalling AVG antivirus (saw that on some forums), didn't work. I tried to plug my ethernet wire directly in my computer instead of passing through my router, didn't work. I tried the Enable QoS tweak and set it to 0% instead of 20%, didn't work. I'm using windows 7 ultimate 64 bit - Intel Core 2 Duo 3ghz proc - 8 gb 667mhz DDR3 memory - Onboard 100 mbps network adapter - Geforce GTX 560 (I know it's a waste with the Proc I have but i'll upgrade PC soon). BTW, I upgraded my internet connection from 8 Mbps to 30 Mbps. the 8 Mbps was maxed out on any speedtests or any popular torrents. After I upgraded I'm getting max 17 Mbps... it seems to cap there for an unknown reason !
Unable to download and install mobeestar (new user).
View 1 Replies View RelatedUnable to register sip server
View 1 Replies View RelatedUnable to register to SIP server
View 1 Replies View Relatedi have new flopy drive when i m formatting its showing the error that windows is unable to format the drive
View 1 Replies View RelatedNot sure if this is the correct forum, but I tried a search and didn't find a related thread. I have set up the FTP Server on two Windows 7 (Pro 64-bit) boxes via IIS. I have found that if either PC goes to the screensaver, I cannot FTP to that PC. I get "connection timed out." The second I move my mouse or hit the keyboard to get rid of the screensaver, I can immediately connect via FTP again. Neither box has the screensaver password protected. Is there some setting I need to change so that FTP can connect whether the box is logged on, logged off, or has the screensaver up? This PC will eventually serve as the main image to go out to about 300 remote sites with scripts that run overnight and will need access via FTP.
View 5 Replies View RelatedI have tried searching online for solutions but to no avail. My laptop is just under 12 months old and other than the battery dying already I have never really had any problems until last week. Its a Dell Inspiron 1564, Intel I3 running windows 7 home premium.After my computer has been woken from sleep mode any window I open in full size no longer sits flush with the top of the monitor (its about a cm below top of screen), but my desktop background is still normal and reaching the top of the monitor and I can put my cursor up there. I have updated my video and BIOS drivers from the Dell website yesterday but that doesnt seem to have done anything. If I restart my computer it goes back to normal again until the next time it sleeps but I would really rather not have to turn my computer on and off 15 times a day?
View 4 Replies View RelatedI tried to log onto Firefox and it said something about not able to connect to the proxy server. I then tried to connect to IE, Opera, and safari and they didn't work. I configured my FF settings to let the network choose the server. But for some programs, like MW2 I cannot access Multiplayer, but I can access teamspeak.
View 9 Replies View RelatedI have recently purchased a new laptop with Windows 7 Home Premium x64. I installed Office 2007, which has updated to SP3.Using XP I used to be able to successfully use Outlook 2007 for my office email, which uses a microsoft exchange server. I have not been able to get this to connect using Windows 7 despite using exactly the same settings. I have also tried a number of other combinations as advised from other sites but I can't get anything to work?This microsoft fix was also of no help... Error messages when you try to connect Outlook 2007 to Exchange Server: "The action cannot be completed" or "Your Microsoft Exchange Server is unavailable" or "Cannot start Microsoft Office Outlook".I have tried various username combinations: username or domainusername.I have tried various password security options.This is the error message I get: Outlook cannot logon. Verify you are connected to the network and are using the proper server and mailbox name. The Connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action.
I use the following setting:
Use Cached Exchange Mode - unchecked
Encrypt data between MicroSoft Office Outlook and MicroSoft Exchange
Server - checked
Connect to my Exchange mailbox using HTTP - checked
Proxy authentication settings: Basic Authentication
I just upgraded my fileserver to 2008 R2 (clean install) and also upgraded my home PC to Windows 7 (also a clean install). Both are connected together using a linksys 8-port gigabit switch and each machine has 2 NICs which are bridged. The server has a static IP and the workstation currently has a static IP as well (although I've had it set for DHCP and the problem still occurs). Network Discovery is enabled on both and they are both in the same workgroup.
Now with that being said, here's the issue.....
Periodically, the workstation no longer can "see" the server if I try to browse the network. However I can still ping the server by IP as well as name, browse fileshares and even RDP into it. The only thing that is affected is if I'm using a program on my PC and need to access files that are on a network share, then the server isn't listed under network to allow me to browse to the share.
When this happens, I can usually reboot the server and then it will show up, but there seems to be no set pattern as to when it will disappear. If both machines are left on and not rebooted, the server sometimes will just show up under Network for awhile and then disappear again. One final note, on the server, the workstation does show up when browsing the network.