When I try deploy the apps from server. I logon to client pc I have given all the rights but the apps doesn't appear on client pc desktop and all programs. Instead I have to go to network>serverpc>the share folder and double click in order for it to appear.
View 5 RepliesI have a system with a lite version Windows 7 ultimate. From the lite version the remote desktop connection terminal client was remove. There is any way to install it now?
View 1 Replies View RelatedOS: Windows 7 64 bit
Laptop: ASUS Notebook K60IJ Series
I work from home a lot by remoting in to my PC at work. Last week I was able to remote in just fine, but today could not using my laptop. I could remote in using my wife's laptop just fine, but could not using mine. I get the following error:Could not connect to terminal server can log into the network just fine. I have a random passkey that I enter etc. But, when I put in my workstation ID and try to connect, I get the above error.Again, I was able to log in just fine using my wife's laptop today, but not mine I have not made any changes recently (that I know of)
Update:this seems to be an Internet Explorer issue. I downloaded and tried to remote in using Firefox and it worked just fine. Any ideas why IE is now giving me issues? Is there a setting that changed? I was gonna try to uninstall and reinstall IE, but it does not come up in my list of programs to uninstall...
my office has a terminal server and every time I launch it with dual monitors the terminal server windows do not lock at the maximum size. I can move the entire terminal server window up and down and side to side just by moving the mouse...it is irritating and not allowing me to use the computer efficiently.
If I use 1 monitor, the screen locks. The other guys in the office with Windows XP do not have this problem either.
No mail server client came with Windows 7, that i can find, any recommendations?
View 7 Replies View Relatedits possible to use windows 7 Ultimate as a Server for thin client? I'll be using nc600 as my client terminal. The box says it supports windows 7. Is there any additional software I need to install on windows 7 server machine before I can use the client terminal?
View 4 Replies View Relatediam trying to create one domine in vm ware.i am install one server os 2008 and windows 7 client os.in 2008 installed adds.but in client pc can't support connect to network.
View 2 Replies View Relatedi have following problem. At work we have HP proliant ml350 server with windows server 2008 on it, 3x windows 7 client and 25x win xp sp2 clients. Network doesn't work, clients cant see each other, can't see server and server can't see them in network and sharing center. What could be a problem? Is ipv6 protokol on windows 7 obstructing a server or something else?
View 2 Replies View RelatedI am having an issue with offline files created offline syncing back to the server. I have set up a network share to be available offline on a client computer. All files are available offline without issue. Here is the issue however. If I set the folder to work offline any file I create in the folder when it is offline just disappears when the folder comes back online, there are no conflicts or sync failures reported in sync center. If I create a new folder offline the folder does sync back to the server. Any changes made to an existing file are also replicated back to the server once the share is back online. So the issue is only with newly created files when the share is offline. I have not been able to replicate this error on any other file server in our environment, However I have recreated the issue with multiple shares with multiple Win 7 clients on this file server.
Steps taken so far.
- Checked and reset permission levels on the share.
- Recreated new shares from scratch for testing.
- Disabled and enabled offline files on the client computer and cleared the offline cache.
- Check various registry entry settings.
- Disabled cashing on the File server.
- Tested with XP the issue does not exist with XP.
The clients are running Windows 7 Enterprise 64 bit. The File server is Server 2003 Standard 32 bit with SP2.
I keep getting an error unable to reach server when using Nortel VPN client.The strange thing is sometimes I can connect and other times I get the above error. I have tried rebooting, even reinstalling and the problem comes and goes.
View 3 Replies View RelatedCurrently I'm building a server for a client who wants to run several copies of Diablo 3 on multiple Virtual Machines.Further, they also need the ability to use a hardware unity function.
View 5 Replies View RelatedI can only connect to the network using 64 bit applications on Window 7 Pro SP1.The problem occured after installing the latest version of iTunes (may or may not be related). I uninstalled iTunes with no change. IE 32 bit crashes after opening. Firefox opens but gives Server Not Found error. I cannot connect webservers on the local network with Firefox either. Filezilla will not connect to local or remote servers. VNC will not connect to local servers - IE 64 works fine and command line tools like ftp and telnet to internal and external sites works fine - this is not a DNS, Firewall, or Routing issue.
Same results in Safe Mode
sfc /scannow runs clean.
I reset the winsock, uninstalled all my network adapters, including the drivers and resinstalled them.Rebooted multiple times.Unfortunately I just discoved that System Restore was not enabled so I can't roll back.I doubt this is malware related as I have multiple levels of defense (postini, SpyShelter, Symantec Endpoint) and outside of iTunes have not downloaded or installed anything or even visited unusual websites. I'm about to do a deep scan that will probably take a few hours just to play it safe.
After I close programs that are still pinned to the task bar, can I install another program where the install wizard recommends closing any programs before continuing?
View 3 Replies View RelatedMy problem is windows 7 hangs and freeze when access 2003 server Enterprise edition. This is not a small network, one of the biggest network.i have doubt on individual users on domain. before 2 months we had department wise users mean, for example Accounts@domainname.local. But after we created the individual users like john@domainname.local to all users. this is i believe the cause of problem. When we acess the server via the software it freezed for 5 seconds and then repeat to normal state. And after some time it hangs for 2 minutes.
View 5 Replies View Relatedhow to create your very own Desktop FTP Client using the "Map Network Drive" in "My Computer" that will allow full access to your hosting account instead of using cPanel 11 or simular. You can also drag/drop all your files/folders straight into your "Public_HTML" folder without any issues.I can assure you this is very secure and being a web developer I use this method of access constantly, this is a known method throughout the development world and most of the developers I know use this method because of it's simplicity and ease of access making life so much easier.If you have problems creating your own desktop access leave a post here and I'll try my best to help.Desktop FTP Client
1. From the desktop, click on "Start" then right click on "My Computer".
2. Click on "Map Network Drive".
3. From the screen, click "Connect to a Web site that you can use to store your documents and pictures", and then click Next.
4. Click "Choose a custom network location", and then click Next.
5. Enter the following into the Internet or network address field:
6. Enter your FTP username and account password when prompted.
Then all you do is drag/drop your files/folders that you want to upload onto your hosting/server on My Computer or Desktop and it will upload them for you.If you have any problems don't hesitate to contact me in this thread where i will try and assist you in creating your "Desktop FTP Client". Using this method is just as secure as using your own cPanel or Plesk (Any FTP Client) security.
I'm rolling out Windows 7 to my small company, which is a non-profit, and I won't be setting up a deployment server...so keep that in mind.In the past, with XP, I created a ghost image for each of my hardware devices, and stored them on a server. When I needed to reimage, I'd boot from a custom BartPE disc, access the server share, and use Ghost32 to pull down the image.My older version of Ghost has issues with Windows 7, so I'm looking for a new bootable method. I don't want to use an external USB drive, as I'll be doing the upgrades clinic-style, meaning I'll have several going at once.
View 4 Replies View RelatedThe company that I work for has satellite sites in some remote locations where network access is simply to slow to deploy images through. We would therefor want to put a image of windows 7 with all the drivers, and some of the most common software used included, on a 16 GB USB drive.So far I have been installing Windows 7 on a reference computer, with the drivers and software that I needed, and then syspreped it and used imagex to capture the image.Is there a better way to do what I want? Maybe by using MDT?The image must contain drivers for different Dell models (they seem to use most of the same drivers anyway).
View 2 Replies View RelatedI have a new computer and a backup computer, different hardware (the particular kinds being irrelevant). I also have two Win7 licenses. At each backup I would like to save an image file from the new (primary) computer, restore it to the older one (which I know works with Win7x64), and tweak anything needing tweaking to be able to boot to the old computer under the second license. This saves me the work both of performing sysadmin on the old computer and of backing up the old computer.
View 3 Replies View RelatedI am attempting to test deploy a Windows 7 image to a VMusing VMware Workstation. I have Windows Server 2008 R2 installed as a DomainController with WDS. All network services, such as AD, DHCP and DNS have beeninstalled and configured as well. Both the install.wim and boot.wim files are stored on a separate drive (E)on theWDS server. My problem iswhen I try to PXE-boot the VM to send the image, I get the following error message: CLIENT MAC ADDRESS 00 0C 29 64 E4 5A GUID: 564D90FE-71D7-4F36-3893-38ACA864E45A PXE-E53: No boot filename received PXE-M0F: Exiting Intel PXE ROM. Operating System not found
A quick hunch would leave me to believe that both image files werent stored onthe server, but I double checked and both files were present. I have the network adapter on the serverconfigured with a static IP address (192.168.1.10), as well as DHCP configuredwith a 10 IP address range. (192.168.1.11-192.168.1.20). Ive heard that WDS shouldnt be on the same DC as DHCP and DNS. Does this really matter? Ive checked all of my configurations.
The "Home Premium" version of Windows that comes with most retail computers includes a one-sided (and intentionally crippled) Remote Desktop subsystem that allows my computer to connect to other computers, but doesn't allow other users on my network to remotely control my computer from their desktops. Is there any free software that can take the place of the missing RDP server component? (I'm not ashamed to admit, I'm a cheap S.O.B. who doesn't want to pay to upgrade Windows on all the machines on my home network, especially when this is the only component from the pricier versions that I want or need.)
View 3 Replies View RelatedAt my work place, we are going to deploy Windows 7 to about 20+ computers. I am familiar with WinPE,sysprep , and imagex , but what I am not sure about is drivers for the 3 different models of dell computers I will be deploying to. Models of computers are Dell Optiplex 755 , 760 , 780Do I have to capture an image from each model and put all three images into one wim , then say imagex apply index # for the respective model?Another idea I had was to custom build a Windows 7 install usb (see below)Make a bootable Windows 7 USB stick for install, but replace the install.wim with the .wim from my reference computer (will this even work?)Then using DISM , inject ALL drivers say drivers755 , drivers760 , and drivers780 to the install.wim or boot.wim (not sure which one) so when the installer runs, it finds the neccessary drivers for the model I am installing to.
View 1 Replies View RelatedI curently RDC to my work computer and run the program I need from the work computer and just rely on the screen redrawing. I have the same program on my home computer and was wondering how to map the network drive or what settings to change on the server03 so that I could use that drive on the remote computer as a directory on my home computer for the program I want to use at home.
View 0 Replies View RelatedI'm running a 2003 and 2008 server the 2003 is the primary DC. Most of our PC's are XP and were testing 2 windows 7 machines.
The desktops and some shared drives were stored on a nas box but it was unstable so I shifted the desktops and some public shares to a server on one of the DC's. I redirected the shares using netlogon scripts and they took fine on all computers XP and Windows 7, the desktops were redirected using Group policy, all the XP machines took the redirection, a few needed the users to be reset though. The issue I'm having is with the 2 windows 7 PC's, they have taken the shares but not the desktops. The desktops were working before. I have tried deleting the users and login in again, I have also tried to remove the regedit policies but no success. I have even taken the PC off the domain and put it back on with no success. The same users log in fine on the XP PC's and get the desktop.
I have an windows 7 on my network connected to a domain, and i have on the desktop links to a shared folders to one samba server (AIX). Time to time all links to that server are missing.Everything works fine, all the connections to that server are ok, but no links on desktop, i re-create the links and all works fine for a couple of time.
View 1 Replies View RelatedDoes Windows 7 support terminal Services?
View 4 Replies View RelatedCan not make hyper work with my new window 7?
View 1 Replies View RelatedI have tired everything that I have seen on these forums. Perhaps I am overlooking something simple. I have gotten them to the point where I can see them on each system but when I tried to access them I get "path not valid error". The other thing is it was working before I went on vacation. I used my laptop in Florida and since I have been back I cant get on the network. I don't know what I did to get on the network the first time....
View 3 Replies View RelatedServer - Windows Server 2003 (Small Business Server, if it matters but I think its a Win 7 setting at fault myself)
Client - Windows 7
F: on client mapped to \serverusersmickeymouse
I have a server (HP Proliant ML350 G5) that has a hard disk with Windows 7 Enterprise and Ubuntu (I'll talk about that on UbuntuForums, though). I recently acquired a Dell Dimension 9150. I moved the hard disk from the server to the Dell. Now Windows won't boot. It gets as far as the OS selection. I select Windows 7 from the OS choices. I don't even get the Starting Windows screen. If I try Safe Mode, I get the driver loading screen, but nothing more than that. When I try Startup Repair, it hangs at "Loading Windows Files".I cannot re-install windows because of programs and admin tools found on that hard disk.
View 6 Replies View RelatedLogon to this computer you must be granted the allow logon through terminal services. I have setup a AD in my virtual box and install ts. i also have create a client pc in my virtual box. Whenever from my client pc I connect to the ts web access to get the apps from the server. I key in my id and password it will prompt me this message. But I have already assign the rights. I have already enable this option allow logon through terminal service, allow logon through terminal locally. I have added remote desktop user to permission to it. But it seems like it not working. How I can do it? Or is it the ts license without activating I cannot access?
View 3 Replies View RelatedIn the past, when client workstations were running Windows XP Pro, we could use Terminal Services Manager and take remote control over the user logged into the workstations.
Now that client workstations are upgrading over time to Windows 7 Enterprise (both x64 and x86), I cannot get remote control to work. When I open Terminal Services Manager on a Server 2008 box or Remote Desktop Services Manager on a Server 2008 R2 box and right-click, choose 'connect to Computer' and enter the IP or name of a workstation to connect to, I get 'Access is Denied'.
Every service I can think of on the client is running - remote registry, rpc, remote desktop is allowed, i can remote desktop into the machine (mstsc), no permission issues, etc. The firewall is turned off, etc. but I never get anything other than 'Access is denied'. Neither machine is running multiple monitors, both are updated as much as they can be.
Is there anyone doing this with Windows 7 workstations? There doesnt seem to be a slick alternative to this built in functionality - vnc is not close, logmein rescue is just an added cost, etc.