I have a flash drive. It works great in ANY PC except mine - It picks up the USB drive but shows it as if it has a raw file format - cannot open the flash drive but it shows up on my comp. Now you might think my PC it the problem, which it probably is, but all other USB hardware (including OTHER flash drives) works fine on my PC. Why does my PC not detect it properly?
View 5 RepliesI just got this new computer, running 64-bit Windows 7 Home Premium. Everything was working fine at first, but then it automatically updated some things. Now, Flash doesn't work online anymore, in any browser. The content starts to load, then the browser freezes, and I have to force quit it.
I have the most recent version of Flash Player, and I can still play .swf files I make myself, so I don't know what to do anymore.
I'm fairly sure that this isn't an isolated problem, as a friend of mine is experiencing the same thing.
In a possibly related problem, .avi and other video files on my hard drive no longer play, nor do music files.
I doubt my specs are needed, since this is almost certainly a software problem, but I'm running on a Dell Studio, with a 2GHz dual core processor and with 4Gb of RAM.
I had problems accessing the internet through laptop last evening. I noted that another network was active. When I went to Network and Sharing Center and clicked on network icon our home computers were shown but the other active network's gateway showed up. I was able to click on its properties and see its mac address etc. I called my provider and their tech section is looking into it. I have an admin password and running encryptation with a password key on my 2 wrie gateway. Does anyone have an idea as to what could be the cause of the other home network gateway showing up in our home network?
View 3 Replies View RelatedHow can you copy one flash drive to another flash drive,on the same computer?
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD Athlon(tm) II X4 630 Processor, AMD64 Family 16 Model 5 Stepping 2
Processor Count: 4
RAM: 3839 Mb
Graphics Card: ATI Radeon HD 4200, 256 Mb
Hard Drives: C: Total - 702932 MB, Free - 657555 MB; D: Total - 12368 MB, Free - 1523 MB;
Motherboard: FOXCONN, 2AB1
Antivirus: Norton 360, Updated and Enabled
I have 4GB of RAM and it uses maybe half a gig. I use an extensive amount of mods and I know that it'll lag the game and cause it to crash. After doing some research I've seen some people allocating more memory to minecraft by creating a .bat file and inserting this coding (assuming I am using the correct words. Feel free to correct me):java -Xmx1024M -Xms1024M -jar "C:UsersAdrianDesktopMinecraft.exe" when i run it, I can only get it to run up to 1524. anything further and it says in CMD:
Error occurred during initialization of VM
Could not reserve enough space for object heap
Could not create the Java virtual machine.
Why is minecraft so slow on my laptop?
Running Windows 7
RAM:4.0 GB
CPU: i3 M330 @2,13 GHz
64 bit operating system
how could i find that what generation of computer is mine?
View 2 Replies View RelatedI have a linksys WMP110 running on a gigabyte M55SLIS4 motherboard every time i try to connect to a wireless connection with the card the OS reboots, But i took the card and installed it on my friend mother running the same release of windows 7 and it worked completely fine no reboot not at all and he ran it for more than a week .
So can some help me out here probably tell me what they need to see why it reboots
Before I even go further: yes, the "hide empty drives" has been unchecked)I had to reinstall my machine and I was able to to see the drive letters for the internal flash card reader. However I think something might have gone wrong when I give my external HDD a drive letter that was held by one of the flash card reader).I wrote "I think" because I am not really sure since I never wanted to use the internal card reader till today so I never noticed there was an issue. Anyway, the internal card reader does not show up even when I insert a card in the reader. Basically nothing happens. I have uninstalled the "USB Mass storage device" and it gets installed without any issue but the problem is still there: I can't see the reader. the INTERNAL flash card reader has a USB slot and when I insert a EXTERNAL flash drive, the EXTERNAL flash drive shows up.
View 4 Replies View RelatedI know, should have a backup, I was actually about to create a backup when the flash drive failed on me unfortunately. My newest backup is from about 5 days ago, so I'd prefer to be able to restore the current files.
I moved the drive over to another computer and tried to save a file but when I checked again the file was gone, like it never saved at all. Subsequently, after removing and plugging it back in the computer did not detect the drive (or see it in disc management). It does show up as a generic USB drive in the device manager, but there are no properties for it.
When I add it to a computer, it still adds drivers for it, but then nothing happens after that. It may also be a hardware problem, since the drive fell on the ground pretty hard a while back, but seemed to be working fine. There isn't an easy way to open it up and check.
I also tried using a few data recovery programs, but they couldn't detect the drive either.
I upgraded from windows vista home premium to windows 7 ultimate. Now my tsstcorp ts-t632a cd/dvdw device no longer works. I uninstalled the device and drivers then restarted my computer. That did not work.
View 1 Replies View RelatedMy DVD drive no longer works on my Asus N81VP-D1. If I connect my laptop hard drive to another computer and then install windows 7 to the harddrive using that computer and then put the harddrive back in my laptop, will it work?
View 4 Replies View Relatedi recently updated my OS from Windows XP to Windows 7. I have two HDD one for my OS install and one for my documents etc. I wiped clean for a fresh install the OS drive which removed XP and now contains Win7. The documents drive however wont open. I keep receiving the same message which is...F: is not accessible.Access is denied.I have tried numerous tutorials and browsed many forums where people have had the problem. The techniques ive tried include changing permissions from the properties, trying to change permission through cmd and all the rest. Another piece of information is that when i look at the properties of the drive it shows that its empty.
Free Space: 0bytes
Used Space: 0bytes
Capacity: 0bytes
The drive contains all the files i backed up from my previous OS and all the files that was originally on it.
I installed a hard drive and upon installing drivers for my nvidia gtx 460, it just gave me a black screen once I got to the login screen. Went back in to safe mode and got older drivers, that didn't work either. I have tried 4 versions of the older drivers and it all goes exactly the same. Clean install of windows 7 Home Premium 64. Or do I just need to get a new motherboard/videocard? Also I have a dual monitor setup and the second monitor doesn't get a signal.
View 8 Replies View RelatedI have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
View 3 Replies View RelatedI originally had been running windows XP on my desktop. About a month ago, I bought a new hard drive and installed Windows 7 Ultimate x64 on it. For the last month, I have been able to dual boot between Windows 7 and XP just fine.
When I tried to boot up my machine this morning, my computer no longer boots and have the following message on screen:
"Reboot and Select proper Boot Device or Insert Boot Media in selected Boot device and press a key"
I checked my BIOS and found that only my new hard drive and CD ROM are detected. I imagined that my old hard drive with Windows XP on it finally died. So I disconnected the old drive, but I am still getting the same issue. I have tried changing the boot order. I also tried booting with the Windows 7 setup CD and tried the repair tools. None of them recognizes the Windows 7 installed on my new hard drive. I started command prompt and was still able to see the contents of the new hard drive, with its WINDOWS directory and all my data/installed programs, so I believe the new hard drive still works. Is there anyway for me to fix this without having to reinstall Windows 7 again and lose all the data/programs I have? Does this have something to do with my XP not being bootable anymore?
OS: Windows 7 Ultimate x64
Motherboard: Gigabyte GA-Z77X-UD3H
Harddrive: Seagate Barracuda 1TB 7200RPM 64MB SATA 6Gbps
after installing windows 7 operating system, i cannot use my external disk drive.everytime I insert a CD/DVD it recognizes it but does not run it.
View 3 Replies View RelatedOn a Compaq laptop, the dvd burner does not work, but it will play a CD.
View 1 Replies View RelatedI recently ran into a very weird windows 7 bit problem after installing it on my desktop. I cannot copy large files/ holders into usb flash drive or write large files to cd/ dvd. The copying/ moving process would stay on for about 5-10 seconds then freezes then I get an error message. That is:
H: refers to a location that is unavailable. it could be on a hard drive on this computer...
I have all the latest drivers.
And windows/ nero 9 can't use my dvd drive to burn files.
Some info about my system: AMD X4 630 CPU. MSI KA780G (AMD 780G chipset) mobo. I have 2 sata hdds, non raid mode. The DVD drive is IDE. 4gb ram ddr2 ram. windows 7 64 bit.
When I put a flash USB drive in my Windows 7 machine it gives a beep and tells me that the drivers have been loaded and the drive is ready for use.But I can't see it anywhere, it shows in 'Devices and Printers' but won't open from there.How do I get it to show up when I open 'Computer' from the Start button please.Tech Suppot Guy System Info Utility version 1.0.0.1OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 32 bitProcessor: AMD Phenom(tm) 9950 Quad-Core Processor, x64 Family 16 Model 2 Stepping 3Processor Count: 4RAM: 3583 MbGraphics Card: ATI Radeon HD 3600 Series, 512 MbHard Drives: C: Total - 305141 MB, Free - 183571 MB; E: Total - 953867 MB, Free - 669909 MB; Motherboard: ASRock, N68C-S UCC,,Antivirus: Microsoft Security Essentials, Updated and Enabled
View 14 Replies View RelatedI have a staples relay flash drive on my dell latitude E-6500 I have down loaded info on it and when I try to recover the info i get no message or icon to tell me it is working I bought it 2 months ago could you tell me what the steps are to use it?
View 1 Replies View RelatedDownloaded MP3 Rocket from Cnet but requires a flash player 11. Downloaded it but kept getting a mesage: "A newer version already installed" which is not true. Tried to install an older version but Adobe won't let me install it as it says there is a new version of it.By the way, I had Adobe Flash Player before and it worked!
View 3 Replies View RelatedI just purchased a new USB 256 GB flash drive to transfer documents from my desktop to the flash drive after the process completed I rebooted the computer when I opened my computer the flash drive was showing invalid characters when I opened a flash drive document they also had invalid characters labeled to them and I get the following error " The filename, directory name, or volume label syntax is incorrect."
View 14 Replies View RelatedI unfortunately forgot my windows 7 password of my netbook. However, I was able to find this bootable iso image that removes and windows password. it works great when burnt on a cd and booted from bios but as u know netbooks dun have cd drives. so my qeustion is is there a way to burn the iso image to a usb flash drive from which i can boot from it?
View 1 Replies View RelatedI tried to install Malwarebytes Anti-Malware on a flash drive to be able to run it on another computer but I get an error message. It appears that the data file containing the list of possible infections was installed on my C: drive. Is it possible to run this program on another computer from a flash drive? The error I receive is 'Run time error 13...Type mismatch'.
View 7 Replies View Relatedi have a question looking for the best light Win7 version and if there is chance someone to explain me how to boot it on my USB flash drive.
View 2 Replies View RelatedHow do I download a file from a flashdrive to Windows 7? I did this once before with no problem, but for some reason was unable to correctly do it today.
View 9 Replies View RelatedIs there a way I can partition my USB flash drive without any third party tools? And, is there any way I can use an autorun.inf file in Windows 7? It works fine in XP and Vista but what about windows 7? I have a batch file on it where it will run silently and take a users documents and transfer the files to the USB.
View 1 Replies View RelatedIf I plug my flash drive into my PC using Windows XP, it works fine.No problems.But when I plug it into my laptop, using Windows 7 it will not load it.It says newhardware detected, installing new hardware, Hardware installation failed.If I go Device Manager, It is listed under Unknown Devices.I have tried to uninstall all the USB Root Hubs, Restart the computer, in-order for it to auto re-install with the USB in / out of the computer. But it still fails.
View 4 Replies View Relatedabout my a4tech pocket usb when i plugged it to my toshiba satellite e1802 it read as generic usb but when i plugged my usb flash drive it doesnt read by my a4tech pocket usb hub.
View 2 Replies View RelatedI know that this question is not associated with this topic but i need help.Ive typed in following command in command prompt bootsect /nt60 and my flash drive is not readable any more...is there any command to reverse mentioned command?I was trying to make bootable usb drive and now i cant access my usb flash anymore and i had some important files on that flash.
View 1 Replies View Related