I have just tried to install the prolific USB-Serial COM PORT Driver Windows 7 Home 64 bit to connect my Garmin summit. As hard as I have tried I cannot find a driver that works, I am using a PFRANC data cable that worked with my XP Pro PC with out any problems.i have updated my windows drivers.
View 1 RepliesI'm operating on a desktop intel dq35j0 and clean installed window 7 ultimate.
in device manager two errors appeared
pci serial port driver not installed ( code28)
simple communications controller driver not installed (code 28)
checked hardware id's in device manager as follows
pcven_8086&dev_29b7&subsys_4f4a8086&rev_02 for serial port driver
and the same hardware id for the simple com controller
Ive tried to search these drivers on intel site but get lost as to wher I may find these drivers.
the same issue is a problem on two other pc's after cleaninstall of win 7
1.) is an hp dx2000 nt
here the network controller driver has not installed
the hardware id is
pciven_0675&dev_1702&subsys_6692&rev_00
2.) is a hp pavillion dv6 (1125ei) notebook
here an "unknown device" driver not loaded
the hardware id is
acpihpq004 (double zero fout and not thriple zero four).
in finding driver for PCI Serial Port on my DELL Latitude E6320 OS: Win7 32-bit
View 1 Replies View RelatedMy Windows 7 64 bit install is all good except for the Synaptics touchpad integrated into my keyboard. It is recognized as a Microsoft Serial Mouse, but the latest Synaptics drivers don't seem to 'do' serial. I have tried the new 14.0 driver, as well as an older 9.0 version designed for 64 bit Vista, but to no avail.
I've also tried a serial to PS/2 to USB conversion, and though the touchpad is then recognized as an HID compliant mouse, I can't get it recognized as a touchpad with scrolling, etc. I can't use it as a PS/2 mouse because my new motherboard only has a PS/2 keyboard connector.
I have win 7 64 bit desktop with only serial port, com1 i guess. I have an old HP 5P laserjet that has an lpt1 parallel printer cable securely attached to it. i tried to connect a couple of adapters to the cable and plug it into the com port. I don't get any errors and it doesn't print. I took the driver from the hp site. do i need to change the com port settings (baud rate, etc...? What am I missing?
View 4 Replies View RelatedI just installed Windows 7 and updated all my drivers. I am missing two drivers, and I don't know what they are:
PCI Serial Port
PCI Simple Communication Controller
What exactly are these? I own a Lenovo X200 Tablet. Any ideas where I can find the drivers for these two things?
how can i make a connection with serial port in windows 7 like as i did in windows XP?
View 3 Replies View RelatedI want to connect tv to Dell inspiron 19
View 4 Replies View RelatedI am using a hyperterminal software called Coolterm. I have used it in the past with success, however now when I run it I get an error "No serial ports found, Your system currently does not have any serial ports. Unless at least one serial port is added, this application will no tbe usable".
View 2 Replies View RelatedI recently experienced BSOD while using NetBeans IDE to send commands to my robot(project) through serial port. I actually connected a ZigBee module to my Serial Port and sent commands to my robot using interface created in NetBeans. This occurs everytime i use NB IDE.If using emulator no problem occurs. But i need to send commands through NB IDE only as part of my project.
View 5 Replies View RelatedFreee download pci serial port for hp elitebook 6930p
View 1 Replies View RelatedI took my computer in for some repairs and requested that I get Windows 7 installed on it since they wiped the hard drive for me to begin with. So they did that and never bothered to ask if I wanted 32bit, or 64bit.My motherboard and so on are 64bit compatible, and the sole reason why I want this is because many of my video-games claim that I don't have enough memory with the 3.25gb of RAM usage to use certain video settings. In reality I have 16gb of RAM ready to be used, unfortunately the 32bit Windows 7 can't use it. Kind of lame that in 2012 all versions can't simply do it, but I'm sure more technological reasons negate it.Now my questions are that my current 32bit Windows 7 serial key can be used with a different install CD that is 64bit? My sister has Windows 7 64bit CD and I'm wondering is that even legal to do to begin with, as well as possible? Oh and I'm aware they must be the same version such as Home Premium, which they are.
View 9 Replies View RelatedAHCI Port Error 0 Press F2 to continue. This error shows on my Gateway zx4800 but when I press F2 nothing happens. S.M.A.R.T capable and status BAD.....it also show this above the AHCI error. My hdd works with other PC.
View 2 Replies View RelatedFree (ppt) Wan Mini-port download for windows 7 64bit?
View 1 Replies View Relatedcan you give me PCI serial port driver
View 2 Replies View Relatedpci to sata cardmodal promice pdc20375
View 1 Replies View RelatedHardware ID = USBVID_067B&PID_2303
I have been all over the internet looking for a driver that works with this device. I am running Windows 7 Ultimate RTM 64-Bit. Every driver that I have found that will "work" absolutely does not work. Any ideas on a working driver?
I mave managed to get USB Storage Devices to work, but things like usb printers are not working. The problems will be described in the following images. The Devices give the error 28 (no driver). Here are some pics- [URL]. I cant find any such driver. No system restore
View 6 Replies View Relatedupgraded my O/S from windows professional XP 64-bit with a clean install of windows 7 Professional x-64. The motherboard is an Intel D972XBX2, and the PC that it is installed in works just fine. The devices connected to the on-board SATA connectors include a 500GB Hitachi HDD and a Lite-on DVD-ROM drive, and I do not have any problems with these. However, indications in Device Manager are that no driver has been installed for the serial ATA controller, and this is a big puzzle that has me stumped. I am unable to find any compatible driver from either the Intel driver download center, or microsoft windows update, for this component and I am unable to get any assistance from Intel Tech Support. This is simply because the D975XBX2 mother board is no longer made by them. I've had this PC for almost four years, and all hardware passed the Microsoft windows 7 hardware compatibility test which convinced me to follow through with the upgrade to this operating system.
View 5 Replies View RelatedDownload driver for universal serial bus (usb) controller?
View 1 Replies View Relatedwhere can I download universal serial bus controller driver?
View 12 Replies View Relatedcasn you istal this driver
View 1 Replies View RelatedUniversal serial bus controllers driver download code 43?
View 1 Replies View RelatedParallel port to usb driver windows 7
View 1 Replies View RelatedI recently purchased a Logitech USB headset, and it worked fine for the first few days I had it. I noticed, however, about two days after the purchase that it failed to work. My USB mouse worked fine, however, so I figured it was the headset. I discarded the headset and continued using the built-in microphone. Later, however, when I had to restart my system in order to install an update, my mouse stopped working as well (they work fine on other computers). I looked to see what the problem was in the Device Manager, and my Universal Serial Bus driver was apparently damaged.
As well as my Standard Enhanced PCI to USB Host Controller and my Standard OpenHCD USB Host Controller. I attempted to uninstall, reboot my system, and then let Windows automatically reinstall the drivers, but they always fail to do so in the middle of the installation process. I then attempted to do a system restore the day before both the Windows update and then before the problems with the USB headset, but the problem persisted. If all else fails, I might have to reformat, but I do not want to have to result to that extreme since I cannot salvage anything of value onto an external hard drive.
The PCI to USB Controller has the error: Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)
The OpenHCD USB controller has the error: Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)
The Universal Serial Bus USB Controller has the error: The Drivers for this device are not installed (Code 28). The system cannot find the file specified. To find a driver for this device, click Update Driver.
I currently run on an HP Pavilion dv7 Notebook PC and run Windows 7 Home Premium Service Pack 1 (64-bit)...
Download driver for universal serial bus(usb) controller for dell inspirion n 5050
View 1 Replies View RelatedJust got a new Asus Zenbook UX31E and am having a certain problem where if I plug my external drive (Samsung S2 1TB, USB 3.0, 2.5") into the 3.0 port windows tries to install a driver for the new device but fails. Now the drive powers on when connected but wont load up as an accessible drive and is not found is disc management.I've tried the HDD successfully in another laptop with USB 3.0 and it works fine on my Zenbook's USB 2.0 port so I'm guessing there's no problem with the HDD itself. Also I have tried a small flash drive in the Zenbook's 3.0 port which worked fine.I have tried updating the USB 3.0 driver to the latest version via Asus' driver database but have got the same result.I would of thought with such a prestigious laptop someone else would of run across this problem but all my googling has turned up ziltch.
View 9 Replies View RelatedI recently installed new software that requires port 8080 to function. When I try to run the software I get an error that port 8080 is being used.How do I check to see what process is using port 8080 so that I can open up the port to run the software? MACHINE: Windows 7x64
View 9 Replies View RelatedTo all the computer geniuses out there, I guess this isn't a windows 7 problem but it's about drivers.I have an Asus K53E-B1 with Windows 7 64bit. It comes with 3 USB 2.0 ports and that's it. I went on the Asus website today and found USB 3.0 drivers update.I can't just download those drivers and use them and expect USB 3.0 performance when I have USB 2.0 ports right?
View 4 Replies View RelatedI have a new Toshiba Tecra R840 on Win7 64 bit. Much of the time, it is connected to a Toshiba docking station. My printer is an older, parallel-only HP LaserJet 6L. It's connected to the PC with a Dynex parallel-to-USB cable.
Here's the thing - Windows installs a new printer driver if I plug the printer cable into a different USB port on either the PC or the docking station. So far, I have three of them. What's worse, each printer driver will only print on the USB port that was used to create it. Quite a nuisance.
Can I do something to have a single printer driver work regardless of which USB port is used?
I'm helping my friend fix up his comp, but he lost the drivers to his Ethernet port. He did a clean install of his computer without really talking to me, so all drivers are lost. We installed windows 7 for his main OS, but it doesn't seem to support this driver natively.
He had a 3com 3C920B-EMB integrated fast Ethernet controller for the last driver, but finding it now seems to be impossible. If anyone knows anything specific on how i could get the drivers again, or how if theres an updated driver that would work for the same card thats be great. Im pretty sure the Ethernet port is built on the motherboard, its an old hp computer, before they were really reliable IMO. He does not have any of the driver discs or anything, bad with computers .