I am using a hyperterminal software called Coolterm. I have used it in the past with success, however now when I run it I get an error "No serial ports found, Your system currently does not have any serial ports. Unless at least one serial port is added, this application will no tbe usable".
View 2 RepliesI just installed Windows 7 and updated all my drivers. I am missing two drivers, and I don't know what they are:
PCI Serial Port
PCI Simple Communication Controller
What exactly are these? I own a Lenovo X200 Tablet. Any ideas where I can find the drivers for these two things?
I'm operating on a desktop intel dq35j0 and clean installed window 7 ultimate.
in device manager two errors appeared
pci serial port driver not installed ( code28)
simple communications controller driver not installed (code 28)
checked hardware id's in device manager as follows
pcven_8086&dev_29b7&subsys_4f4a8086&rev_02 for serial port driver
and the same hardware id for the simple com controller
Ive tried to search these drivers on intel site but get lost as to wher I may find these drivers.
the same issue is a problem on two other pc's after cleaninstall of win 7
1.) is an hp dx2000 nt
here the network controller driver has not installed
the hardware id is
pciven_0675&dev_1702&subsys_6692&rev_00
2.) is a hp pavillion dv6 (1125ei) notebook
here an "unknown device" driver not loaded
the hardware id is
acpihpq004 (double zero fout and not thriple zero four).
how can i make a connection with serial port in windows 7 like as i did in windows XP?
View 3 Replies View RelatedI want to connect tv to Dell inspiron 19
View 4 Replies View Relatedin finding driver for PCI Serial Port on my DELL Latitude E6320 OS: Win7 32-bit
View 1 Replies View RelatedI have just tried to install the prolific USB-Serial COM PORT Driver Windows 7 Home 64 bit to connect my Garmin summit. As hard as I have tried I cannot find a driver that works, I am using a PFRANC data cable that worked with my XP Pro PC with out any problems.i have updated my windows drivers.
View 1 Replies View RelatedI recently experienced BSOD while using NetBeans IDE to send commands to my robot(project) through serial port. I actually connected a ZigBee module to my Serial Port and sent commands to my robot using interface created in NetBeans. This occurs everytime i use NB IDE.If using emulator no problem occurs. But i need to send commands through NB IDE only as part of my project.
View 5 Replies View RelatedFreee download pci serial port for hp elitebook 6930p
View 1 Replies View RelatedI have win 7 64 bit desktop with only serial port, com1 i guess. I have an old HP 5P laserjet that has an lpt1 parallel printer cable securely attached to it. i tried to connect a couple of adapters to the cable and plug it into the com port. I don't get any errors and it doesn't print. I took the driver from the hp site. do i need to change the com port settings (baud rate, etc...? What am I missing?
View 4 Replies View Relatedmy laptop appear "serial number not found"Why? how do I can repair? I had arrive all HP VietNam, HCM my laptop's warranty card had expired. I very very disappointed. My family had three laptop HP. my laptop is HP Pavillion DV5T-1000
View 3 Replies View RelatedI followed your idea, but not success
View 3 Replies View RelatedCan I get hyperterminal on a windows 7 machine?
View 1 Replies View RelatedI have used HyperTerminal 6.3 on several XP laptops. I have a new desktop with Windows 7, installed HyperTerminal to monitor a USB bridge application (COM3), but get "another program is using selected telephone device" when USB is connected. SO, I can't communicate with it.
View 1 Replies View RelatedI have a HP dv6910us Pavilion and the DVD is not listed in Device Manager. DVD Tray opens and light comes on but does not play DVD. 1st USB port on left side gets - USB Device Not Recognized.One under it works and one on the right side works.OS Windows7 Ultimate. It is running kind of screwy so I wanted to reinstall Windows7 but with the DVD not operating Can't do it. Seems like maybe something in the register got erased or corrupted. If I can get the DVD and USB port to work I won't have to reinstall Windows 7
View 2 Replies View RelatedI recently installed new software that requires port 8080 to function. When I try to run the software I get an error that port 8080 is being used.How do I check to see what process is using port 8080 so that I can open up the port to run the software? MACHINE: Windows 7x64
View 9 Replies View RelatedI just bought a new computer from a computer shop. It is custom built and has the following:Has 8GB RAM, 3.3ghz intel core i5-2500k, windows 7, Intel HD graphics so upto 1.7GB max video memory, 1 VGA slot, 1 DVI slot.Just to confirm I checked in person and my tower has a VGA port and a DVI-D dual link port.
View 3 Replies View Relatedim having the port error of 01.
View 3 Replies View Relatedmy 2 no usb port and lan port are not working other wise other 1 no usb port working this is new laptop i think driver not installed because when i connect the pendrive there was light showing in my pendrive.so i want drivr
View 2 Replies View Relatedas usual I turned off my laptop and after a while a turned on again to use my laptop but it couldn't reach operating system and showed error : " OPERATING SYSTEM NOT FOUND" !
I tried all instructions to solve the problem and finally run by windows start up CD to re-install new windows. this time I faced error: " No drivers were found. click load driver to provide a mass storage driver for installation"
So the other day I logged on to my computer to find all my downloads gone and not reach able and the folder has a huge error something like File osociated cant be found. I have system restored to the previous today and it didnt work What do I do?
View 2 Replies View RelatedI have recently purchased a copy of Windows 7 Upgrade for my PC. Like an idiot, I upgraded my laptop and PC without realizing that you could only use one serial key per machine. My question is, what exactly happens if you never use an activation key on one machine? I was told that a message just shows up every day? Is it as simple as that or will something much worse end up happening?
View 6 Replies View RelatedDriver update program says new driver available 1.0. Any issues regarding updating this driver. No problems needed. Dell Inspirion laptop Win 7 Home Prem. 64bit 4gb ram
View 7 Replies View RelatedI have a problem, i bought a new HL 340 USB to Serial cable to work on my HP G62 Laptop which runs on a windows 7 64 bit operating system.I keep getting this notice in the device manager (USB2.0-ser!) ever time the cable in plugged in.MY feeling is that the driver is missing and i have looking for a compatible driver ever since. how to find a compatible driver to correct this problem?
View 1 Replies View Relatedjust done a clean install retail Windows 7 Home Premium OS and have not been able to locate driver for the above. I used the disc which came with the computer for drivers etc and managed to install everything that was showing driver needed except for this. I have not used any USB devices as yet so is totally clean.
View 4 Replies View RelatedHardware ID = USBVID_067B&PID_2303
I have been all over the internet looking for a driver that works with this device. I am running Windows 7 Ultimate RTM 64-Bit. Every driver that I have found that will "work" absolutely does not work. Any ideas on a working driver?
I have a USB<->serial converter (several, actually) that I cannot get to work under Windows 7. I know the hardware works.
When I try to open the virtual serial port in a terminal program, I get an error message stating that it cannot open the port. When I try to use the old-fashioned command line method ("copy test.txt com7" from the "DOS prompt"), I get an "Access denied" error message.
More details: My computer is a dual-boot Windows 7 Ultimate 64-bit / Windows XP Pro 32-bit system. The USB serial converter worked immediately under WinXP when I rebooted, and it even works in the WinXP virtual machine under Windows 7. I have the latest certified drivers (from FTDI), which are stated to function under Windows 7 64-bit.
The serial converter appears as it should in the Device manager. My computer has one physical COM port, and I can access that one without any problems.
The serial converter is a USB-RS485-WE-1800-BT from FTDI. I have tried a USB<->RS232 converter (don't have the model number here), but it behaved exactly like the other one. I also started the terminal program as an adminstrator (since I suspected access rights issues), but it did not help.
I have tried uninstalling the drivers, then installing the latest certified driver and the even later non-certified driver, but still had the same behaviour.
I have a Suunto dive computer that's designed to download data to a PC software program called Suunto Dive Manager. The dive computer attaches to the PC via a hardware adapter designed to plug into a serial port. Under Windows XP, I used a USB-to-serial converter to be able to attach this adapter to a newer laptop via one of its USB ports. The Suunto software and the USB-to-serial converter are both a few years old.Today I installed the Suunto Dive Manager software on my Windows 7 laptop. The software seems to basically run okay under Windows 7; however, when the USB-to-serial converter is attached to the laptop, the Suunto Dive Manager software reports that it finds no serial ports on the PC.Are there known issues and fixes for using USB-to-serial converters under Windows 7?
View 6 Replies View RelatedI have a TOUCHMATE PC with me, (Core i5 configuration). It came pre-installed with Windows 7 - Home Premium. I need to get back to the factory settings of this PC, but there is no such thing like that, (as you find in some laptops).So, I needed to install Windows 7 - Home Premium again with the same serial key, that i have.
View 2 Replies View RelatedAnyway, a month ago I bought a laptop which came with Windows 7 Home Premium pre-installed. However, it had issues (for those who know about the issue, it's when "Not Responding" error constantly appears in all applications. Something to do with setting the drives to work in IDE or AHCI mode). So I put Windows XP on it, erasing the 7.
But then 2 days ago I got myself a desktop. It's relatively high end, but it's custom built. Did not come with an OS installed. So I put Ubuntu Linux on it. But I'd like to install the 7.
So can I do it somehow for free? I have the 7 Home Premium serial number on the sticker on the bottom of my laptop, but I don't have the DVDs. Is it somehow possible to download the DVDs of the internet, and then put my serial number in?
I know I could find it on the torrent websites, but I am not sure I want to do that. Would it be legal to download a copy of windows 7 from a torrent website, but then put my serial number during the installation?
i think i entered wrong serial for windows 7 then it doesnt enter to windows what a problem
View 4 Replies View Related