Synaptics Serial Driver For W7 64bit
Nov 2, 2009
My Windows 7 64 bit install is all good except for the Synaptics touchpad integrated into my keyboard. It is recognized as a Microsoft Serial Mouse, but the latest Synaptics drivers don't seem to 'do' serial. I have tried the new 14.0 driver, as well as an older 9.0 version designed for 64 bit Vista, but to no avail.
I've also tried a serial to PS/2 to USB conversion, and though the touchpad is then recognized as an HID compliant mouse, I can't get it recognized as a touchpad with scrolling, etc. I can't use it as a PS/2 mouse because my new motherboard only has a PS/2 keyboard connector.
View 0 Replies
ADVERTISEMENT
Apr 28, 2011
I have just tried to install the prolific USB-Serial COM PORT Driver Windows 7 Home 64 bit to connect my Garmin summit. As hard as I have tried I cannot find a driver that works, I am using a PFRANC data cable that worked with my XP Pro PC with out any problems.i have updated my windows drivers.
View 1 Replies
View Related
Jun 20, 2012
I took my computer in for some repairs and requested that I get Windows 7 installed on it since they wiped the hard drive for me to begin with. So they did that and never bothered to ask if I wanted 32bit, or 64bit.My motherboard and so on are 64bit compatible, and the sole reason why I want this is because many of my video-games claim that I don't have enough memory with the 3.25gb of RAM usage to use certain video settings. In reality I have 16gb of RAM ready to be used, unfortunately the 32bit Windows 7 can't use it. Kind of lame that in 2012 all versions can't simply do it, but I'm sure more technological reasons negate it.Now my questions are that my current 32bit Windows 7 serial key can be used with a different install CD that is 64bit? My sister has Windows 7 64bit CD and I'm wondering is that even legal to do to begin with, as well as possible? Oh and I'm aware they must be the same version such as Home Premium, which they are.
View 9 Replies
View Related
Feb 10, 2012
I have a Dell laptop running Windows 64 Home. This was new in November of 2011. After receiving it, I went through the tedious task of updating it via MS Update. I noticed after upgrading, the mouse started behaving very strangely where it would take off and shutter, not respond or be very slow to respond. Contacted Dell and they had me turn off a bunch of stuff on the Dell Touchpad app. This helped but did not fix the issue. I ended up re-installing the OS and made sure the drivers were installed in the correct order using the drivers disk supplied by Dell. Haves since installed the most current driver provided by Dell on their website 15.3.2.1 (April 2011). There continues to be issues with the mouse freezing from time to time. I looked at other threads and removed the Tap to Click feature. There is not much left on and the problem persists.
View 2 Replies
View Related
Jul 11, 2012
I recently formatted my Xnote laptop. The synaptics driver was reset to its original state. The scroll is too jumpy for me, and I tried to update my driver, by going to Drivers | Synaptics. All the download links seem to be broken. How can I get the newest version of the synaptics touchpad driver?
View 1 Replies
View Related
May 31, 2009
When I installed Windows 7 RC on my DELL 1520, the Synaptics Touchpad was recognized as a PS/2 compatible mouse. I missed the scroll function of the touchpad driver. Since the Windows 7 is just came out, there is no dedicated driver for it.
what can i do?
View 9 Replies
View Related
Nov 28, 2009
I just upgraded my father-in-law's HP G70 laptop to Windows 7 Home Premium 64-bit. It is relatively new but had Vista on it. It was an "upgrade" and it appears to have preserved everything pretty well. A large number of updates have ben applied successfully via Windows Update. But -
There's a "virtual scrolling" feature on the trackpad, which no longer works. All the Point Device Properties applet choices seem to be correct... I am not sure why it doesn't work. Anyone got any similar experiences or theories why it wouldn't work?
View 2 Replies
View Related
Sep 5, 2009
I have recently purchased an Acer Aspire 6530 laptop, which comes shipped with Windows Vista x86. I promptly made the restore DVDs, and installed Windows 7 x64, with no issues, except, one rather important one: the TouchPad driver does not work.
When Windows first booted, the driver that comes with Windows worked fine. You did not get the scroll functionality from the side of the pad, which is meant to act like a scroll, but it recognized movement and the two click buttons. After getting on the Internet, Windows automatically went out and found the Synaptics TouchPad driver for me.
Now, according to Device Manager, the driver will function after a restart. TouchPad works fine, go to restart, driver is applied, and.. nothing. The mouse will not move. Any USB mouse if plugged in works fine, but the click buttons and the movement on the pad do nothing.
If you go into Device Manage and uninstall the device, the TouchPad works again! It seems whatever TouchPad drivers that are loaded with Windows 7 work like a charm, besides the built in scroll area, work wonderfully, but the driver that it automatically downloads/installs on boot does not after restarting and applying that driver, even though the device is fully functional according to Device Manager.
Is there any way to FORCE the built in Windows 7 drivers, or a known fix to get the normal ones to work? Does this have to do with 64bit vs 32bit at all?
Note: I have downloaded the driver from the Acer website for Vista and ran it in compatibility mode for Vista, with no change, so it is not just the one Win is automatically finding.
Note2: I tried booting without any internet connection after disabling the driver, but Windows went ahead and installed the driver anyway. It was either still downloaded, or in fact comes with 7 and is not gotten through Windows Update, but is not installed initially? Plug and play is weird sometimes =/.
View 2 Replies
View Related
Oct 27, 2012
I just bought a New Asus x54c notebook, There are some problems i m encountering 1st: my synaptics pointing device driver is automatically disabled at startup .I have to manually start it from Devices and Printers<Mouse Settings. After that it completely works fine. When i bought the laptop it was working fine ,maybe CCleaner did something , i double checked the startup items, its enabled. I checked at MSCONFIG too ..enabled. Cant find anyhting wat to do.
View 8 Replies
View Related
Oct 18, 2009
Hardware ID = USBVID_067B&PID_2303
I have been all over the internet looking for a driver that works with this device. I am running Windows 7 Ultimate RTM 64-Bit. Every driver that I have found that will "work" absolutely does not work. Any ideas on a working driver?
View 9 Replies
View Related
Apr 4, 2012
can you give me PCI serial port driver
View 2 Replies
View Related
Oct 25, 2009
I'm operating on a desktop intel dq35j0 and clean installed window 7 ultimate.
in device manager two errors appeared
pci serial port driver not installed ( code28)
simple communications controller driver not installed (code 28)
checked hardware id's in device manager as follows
pcven_8086&dev_29b7&subsys_4f4a8086&rev_02 for serial port driver
and the same hardware id for the simple com controller
Ive tried to search these drivers on intel site but get lost as to wher I may find these drivers.
the same issue is a problem on two other pc's after cleaninstall of win 7
1.) is an hp dx2000 nt
here the network controller driver has not installed
the hardware id is
pciven_0675&dev_1702&subsys_6692&rev_00
2.) is a hp pavillion dv6 (1125ei) notebook
here an "unknown device" driver not loaded
the hardware id is
acpihpq004 (double zero fout and not thriple zero four).
View 9 Replies
View Related
Sep 27, 2011
pci to sata cardmodal promice pdc20375
View 1 Replies
View Related
Mar 19, 2012
in finding driver for PCI Serial Port on my DELL Latitude E6320 OS: Win7 32-bit
View 1 Replies
View Related
Jan 15, 2011
I mave managed to get USB Storage Devices to work, but things like usb printers are not working. The problems will be described in the following images. The Devices give the error 28 (no driver). Here are some pics- [URL]. I cant find any such driver. No system restore
View 6 Replies
View Related
Feb 4, 2011
upgraded my O/S from windows professional XP 64-bit with a clean install of windows 7 Professional x-64. The motherboard is an Intel D972XBX2, and the PC that it is installed in works just fine. The devices connected to the on-board SATA connectors include a 500GB Hitachi HDD and a Lite-on DVD-ROM drive, and I do not have any problems with these. However, indications in Device Manager are that no driver has been installed for the serial ATA controller, and this is a big puzzle that has me stumped. I am unable to find any compatible driver from either the Intel driver download center, or microsoft windows update, for this component and I am unable to get any assistance from Intel Tech Support. This is simply because the D975XBX2 mother board is no longer made by them. I've had this PC for almost four years, and all hardware passed the Microsoft windows 7 hardware compatibility test which convinced me to follow through with the upgrade to this operating system.
View 5 Replies
View Related
Jun 11, 2012
Download driver for universal serial bus (usb) controller?
View 1 Replies
View Related
Nov 5, 2012
where can I download universal serial bus controller driver?
View 12 Replies
View Related
Jan 22, 2013
casn you istal this driver
View 1 Replies
View Related
Oct 9, 2012
Universal serial bus controllers driver download code 43?
View 1 Replies
View Related
Jul 12, 2012
I recently purchased a Logitech USB headset, and it worked fine for the first few days I had it. I noticed, however, about two days after the purchase that it failed to work. My USB mouse worked fine, however, so I figured it was the headset. I discarded the headset and continued using the built-in microphone. Later, however, when I had to restart my system in order to install an update, my mouse stopped working as well (they work fine on other computers). I looked to see what the problem was in the Device Manager, and my Universal Serial Bus driver was apparently damaged.
As well as my Standard Enhanced PCI to USB Host Controller and my Standard OpenHCD USB Host Controller. I attempted to uninstall, reboot my system, and then let Windows automatically reinstall the drivers, but they always fail to do so in the middle of the installation process. I then attempted to do a system restore the day before both the Windows update and then before the problems with the USB headset, but the problem persisted. If all else fails, I might have to reformat, but I do not want to have to result to that extreme since I cannot salvage anything of value onto an external hard drive.
The PCI to USB Controller has the error: Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)
The OpenHCD USB controller has the error: Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)
The Universal Serial Bus USB Controller has the error: The Drivers for this device are not installed (Code 28). The system cannot find the file specified. To find a driver for this device, click Update Driver.
I currently run on an HP Pavilion dv7 Notebook PC and run Windows 7 Home Premium Service Pack 1 (64-bit)...
View 4 Replies
View Related
Oct 25, 2012
Download driver for universal serial bus(usb) controller for dell inspirion n 5050
View 1 Replies
View Related
Aug 17, 2009
I just installed Windows 7 Build 7600 and I am trying to get the touchpad scrolling to work on my Dell Inspiron 1420. I installed the synaptics drivers from their website (v10.1.8 x64) but when I go to mouse properties and click the synaptics tab it only allows me to configure the right and left click buttons. How can I configure the scrolling of my touchpad? I NEED it!
Also are there any iTunes guru's out there? I have my library all setup on my vista partition. Is there anyway I can get my library/playlists on the Windows 7 side. I don't want 2 copies of my music, I want it to all link to the files on the vista partition but I have a feeling I will have trouble either getting the playlists in or trying to gain access to those files on that partition.
View 9 Replies
View Related
Jan 17, 2009
I have installed the Synaptics Touchpad driver onto my new W7 install. All is working as it should, however I have a very minor problem. Whenever I logon, I am asked whether or not to run the SynTPEnh.exe process (this is the tray icon).
I was never asked in Vista whether or not to run the process, and in W7 I will always want to run it.
How do I get around this minor problem, and set it that it runs by default?
View 5 Replies
View Related
Apr 4, 2009
I installed Windows 7 on my laptop, and let it use the default drivers in most cases. The downside is that I lost the scroll functionality on my touchpad, which I can't see to get back any other way than using the Synaptics software.
The drivers I have on CD are quite old, but the ones from the Synaptics website seem to work fine (plus there are 32 bit and 64 bit editions):
http://www.synaptics.com/support/drivers
View 4 Replies
View Related
Mar 31, 2011
I have a 2330s HP laptop.
Everything worked fine till 1 hour ago or something like that. Then everytime i press the left button it will "left button-click" AND "right button-click" and it actually does the same with the right button.
I have tried to see if the settings have been messed up, but no. Everything is normal. I have tried changing the usage of each button - like changing the right button assignemt to do a "down arrow" instead of a "special click", but then it just does a "left button-click" and the "down arrow"...
I have tried uninstalling the driver, updating the driver, rebooting the computer, changing the settings, used windows recovery...
I really don't know what to do. When I plug in a USB mouse, that works fine. No problems there. It is just the touchpad buttons...
View 3 Replies
View Related
Oct 15, 2011
i have a laptop which has a Synaptics touchpad it use to work well but few days it is not working well when im moving it but it moves slow and jumps here and there i cannot use it always moves from one place to another i dont know why.
View 9 Replies
View Related
Nov 4, 2009
Latest version only for x64 systems 14.0.10.0
View 0 Replies
View Related
Feb 12, 2012
I'm having a bit of a conundrum. My Toshiba touchpad has developed a bad habit of disabling itself at random.The device is listed as a Synaptics Touchpad V7.2.I'll be typing along, or moving the mouse, or just doing nothing at all (waiting for a download to finish, for instance) and the mouse will become suddenly disabled. The only way to get it back is by pressing FN+F9 or sometimes to press the enable/disable button immediately above the mouse. I know I'm not pressing either of these by accident when the mouse turns off.When this happened, I took it as a sign that it was time to reformat the hard drive and start fresh. Even during the Windows installation, the mouse continually disabled itself. After installing the Toshiba Value Added Package and the Synaptics driver, the only change is that now I can see a big icon in the center of the screen alert me when the state of the mouse switches from enabled to disabled.
I'm noticing now too that it's not just disabling itself. If I don't re-enable the mouse right away, it will renable itself after a few moments. This can happen as much as once every few seconds and makes getting any real work done impossible.
View 2 Replies
View Related
Mar 6, 2009
I have researched this problem quite a bit and tried several possible solutions that have worked for many users yet nothing had worked. I have tried several different drivers, tried tweaking settings with no solution in sight.
I am using Windows 7 build 7022.
Can anyone advise?
View 3 Replies
View Related
Jan 27, 2010
Just bought this laptop today, an Acer 5732Z,
The touchpad it uses is a @Synaptics TouchPad V7.0.
Basically, when I type the cursor pauses for 1 second until my last keystroke is finished, I want to DISABLE this feature.
I've checked the driver settings and windows7 properties and I cannot find the option anywhere!
View 7 Replies
View Related
