USB Address Description Test
Mar 13, 2009Can any one tell me how can i do USB Address Description Test...
I want to do this test manually not with the DTM ..
ADVERTISEMENT
Computer Description And IP Address In Network Folder
Feb 26, 2010When I go to the Network folder, all of the computer names on the network are listed.But the IP Address column is blank. How do I get it to display the IP Address for each computer listed? Also, can I get it to display the Computer Description as well?
View 6 Replies View RelatedSelf-test Status Value : 7 (completed With The Read Element Of Test Failed)?
Sep 8, 2011I'm not sure why this came up?
Also if I just boot it normally I get a picture & it freezes?
Disable Test Mode Watermark But Keep Test Signing Enabled?
Mar 10, 2011I've been using my Ps3 controller as an alternative to an Xbox 360 controller on my PC (to play games with a gamepad) but in order to use my Ps3 controller as a makeshift 360 controller, I need test signing enabled.
Unfortunately with test signing enabled I get a big ugly watermark at the bottom right of my screen, as far as I know the only way to disable this is to disable test signing, otherwise it just won't leave! Is there any way I can get past this and somehow keep driver test signing enabled but get rid of that horrid watermark ruining my gorgeous wallpaper?
'No Internet Access' IP Address Shows Router Not The Modem IP Address
Jul 7, 2012My internet connection shows 'no internet access' even though my ISP shows the connection is coming into the house just fine. I usually use a router (NetGear-WNR3500U) but I right now I have the Ethernet connection plugged directly into my PC. I tried directly plugging into my laptop and the internet works just fine. So I know the problem resides in the PC.
Some troubleshooting things I have tried.
-Power cycled my modem, router and PC.
-Repinged my connection from my ISP(Comcast Xfinity)
-Used the reset option on the router and the modem
-I was walked through the internet options needed with the tech support from my ISP to make sure DHCP was enabled and every other setting was correct, and he cleared me that all settings were correct.
-Tried ipconfig commands to /renew and /release my IP When I tried ipconfig /renew I get the error 'An error occurred while renewing interface Local Area Connection : unable to contact your DHCP server'
-Restored my PC to a restore point where the Internet was working
All of these options did not work.
What I think the problem is and I am not sure how to fix it, when I run the ipconfig /all command my Auto configuration IPv4 Address shows 169.254.112.76 which I was told is a router IP address even though I am plugged directly from the modem to my PC with an Ethernet cord. So I think that's my problem? But I am not sure.
How To Enter A Description For A File
Feb 9, 2012i simply want to type in a file description in the description box in windows explorer?
View 14 Replies View RelatedCan't Change Computer Description
Jul 30, 2009I have one problem. I can't change computer description here. I am running Windows 7 (7600) with administrator account.
I cant write there, it it doesn't allow me, and not showing Text Select mouse only shows me Normal Select mouse.
Computer Description - Change
Jul 30, 2009How to Change Your Computer Description in Windows 7 ?
View 0 Replies View RelatedProcess With No Description Nor User Name?
Mar 23, 2012few days ago i noticed four processes in my task manager that don't have a description nor a user name each one of the uses around 2.5 k of memory and i can't end them so what do you think ???
View 2 Replies View RelatedDescription For Event ID 54 From Source AFD Cannot Be Found
Aug 17, 2012[code] The description for Event ID 54 from source AFD cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.If the event originated on another computer, the display information had to be saved with the event. [code]
View 2 Replies View RelatedWindows 7 Does Not Show Computer Description?
Nov 19, 2011In network explorer PC are shown by computer name but computer description does not appears.
View 2 Replies View RelatedWindows 7 64 Bit Won't Let To Log On After Computer Name A Description Changed
May 12, 2012Windows 7 64 bit Won't Let Me Log On After Computer Name an Description Changed
View 1 Replies View RelatedErrorcode: 0x8007000D Description, The Data Is Invalid
Apr 16, 2009I've recently upgraded to windows 7, and everything is running smooth and nicer than vista, but i'm been getting this notification that when windows is trying to activate, it can't. I got an activation key and everything form Microsoft for it, but i don't know what the problem is. For now its not causing any trouble, but i wonder if it will later on or not adn if i can fix it somehow?
errorcode: 0x8007000D Description, the data is invalid
Modify/Change Pop Up Description And Icon Of RECORDED TV In Start Menu?
Oct 9, 2011Uploaded with ImageShack.us
View 1 Replies View RelatedComcast Address Book To Windows Live Mail Address Book
Apr 24, 2011Having problems exporting my comcast address book to windows live mail address book,Also tyied exporting address book from plaxo without success, please help!
View 1 Replies View RelatedChange The "Type" Description Of File Types In Explorer?
Mar 28, 2012After doing some Googling I discovered that it is impossible in Windows 7 to sort files by file extension -- one can only sort by file type, which depends on the file type description. This means that if I want to sort by file type, I need to rename the type descriptions of all my most commonly used files.
In addition, the only place where I can see a file's extension is in the file name itself, and not e.g. in the status bar when a file is selected. In Windows 7, the file type description (not the file extension) is also in the status bar.
In other words, in Windows 7 all files labelled e.g. "Opera Web Document" are sorted as if they have the same file type, regardless of whether they are .html, .htm, .mht, etc. And if I select a file and look at the status bar, the file's type is indicated as "Opera Web Document", without any clue as to the file extension. The only way for me to see the file extension is to increase the width of the "Name" column until the end of the file name becomes visible.
So... my question is:
Is there an easy way to simply rename the file type descriptions? I see that my JPG files are named "JPG File" and my PNG files are named "PNG" file, which is extremely useful. What I now want is to rename my HTML, HTM and MHT files' file types to "HTML File", "HTM File" and "MHT File", and the same would apply to all file types I often use (e.g. DOC, DOCX, XLS, XML, TXT, etc).
Change Mac Address And Ip Address?
Dec 31, 2012i want to change mac address and ip address on acer apire win 7
View 4 Replies View Related"Code Error:0xc004E003. Description: The Software Licensing Service Reported That License Evaluation Failed"
Apr 7, 2011When i try to activate my copy of windows 7 ultimate i get the following error message: "Code error:0xc004E003. Description: The Software Licensing Service reported that license evaluation failed"
Here are some basic info of my pc:
450 @ 2.20GHz, x64 Family 6 Model 22 Stepping 1 Processor Count: 1 Tech Support Guy System Info Utility version 1.0.0.1 OS Version: Microsoft Windows 7 Ultimate , 32 bit Processor: Intel(R) Celeron(R) CPU RAM: 1014 Mb Graphics Card: Intel(R) G33/G31 Express Chipset Family, 256 Mb Hard Drives: C: Total - 152624 MB, Free - 18127 MB; Motherboard: ASUSTeK Computer INC., P5KPL-VM-MUSTEK-SI, x.xx, MS1C92D09200022 Antivirus: avast! Antivirus, Updated
Edit Windows 7 Os Selection Menu Description Menu?
Jul 17, 2012how to edit windows 7 os selection menu description menu ?
View 3 Replies View RelatedTest CPU Is Dead Or Not?
Jun 2, 2011how test CPU is dead or not? I have i5 750 and whit it My working PC doesn't boot up, when I set it
View 2 Replies View RelatedWEI Test Cannot Be Completed
Oct 30, 2011Keep getting the same error over and over, tried many things (inclduing scf /scannow) but to no avail.Here is the bit from the log:
Code: 1348769 (3424) - winsatlogging.cpp:0815: --- START 20111030 17:15:04 ---
1348769 (3424) - winsatmain.cpp:4301: Command Line = "C:Windowssystem32winsat.exe" formal -restart clean -cancelevent 8e00fb41-d1d6-4e88-8347-83b99be94b73
1348769 (3424) - winsatprocesswinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
1348784 (3424) - winsatmain.cpp:4474: > IsFormal=TRUE IsMoobe=FALSE.
[code]....
HD Tune : How To Test SSD
Nov 11, 2012whats the recommended way to test the SSD with the app.
View 3 Replies View RelatedBsod During Stress Test 0xa
Feb 28, 2012Basically this is a new system, however it does not come with a modem - the modem is required because they use dial-up. So my customer purchased one of his own, ever since the laptop has been experiencing a 0xA bsod. When the usb jack is not plugged in we still experience the bsod.The jack is a Zoom 56K Modem Series 1063 - we installed the 64bit drivers seeing as we have a 64bit OS here.I debugged the dump files myself and received two process names:
win32k.sys
ntkrnlmp.exe
Specs: - Windows 7 Pro x64 - This is the original Acer installation of Windows - OEM - What is the age of system (hardware)? System was purchased on Feb. 1st 2012 - Age of installation is fresh - barely even a month old
Test Drive Crash
Aug 16, 2009when i start tdu, crash me to de desktop, and only crash me when i connect my steering wheel (genius speed wheel 3mt) or my joystick, there are any solutions for this problem ?
View 9 Replies View RelatedAMD VCC LCD - Cannot Load Test Image
Nov 15, 2011When open VCC and go to Displays/DigitalFlatPanels/LCD Overdrive, everything is grayed out. Everything else works, its just this, you can see it, but the text and borders are gray, at one point it worked for a brief period and said "cannot load test image" or something along those lines. is there any 3rd party driver I need to do this?
View 2 Replies View RelatedSmart Test Failure On HDD
Sep 5, 2012The only thing that failed is "Re-allocated sector count: results are value 138, threshold 140, worst 138.I have noticed my laptop heating up more than normal for a couple of weeks. Is this bad news?
View 6 Replies View RelatedTest My RAID-0 Setup ?
Aug 20, 2010I am on the tail end of building my system. It has been quite and experience so far. After an already successful first build, the computer is OC at 3.9 ghz stable but then I felt the urge to upgrade my sole 1TB hard drive ( 32 MB Cache /3 mbs ) into a RAID 0 configuration,using 2 brand new WD 1TB hard drive, 64 MB Cache / 6 mbs, which my Asus supports. I am assuming that this will seriously improve speed and performance.trying to figure out the RAID setup in BIOS and a clean install of Windows 7 64 bit, I finally got it to work. The computer is now operational. But there is only concern I have...
I can't tell any MAJOR improvement ! A slight improvement in speed when I change windows and programs is notice.In addition, the transfer rate when I moved files to the new RAID was quicker at around 88 MBS. Why I am concern is because my Windows system assessment's score for hard disk transfer rate is only at 5.9, which is low and the same as before. Everything else is at 7.5 or higher. Also, I was hoping the load times of my files ( the thumbnail previews ) would increase in speed, but appears to be the same. I am somewhat certain that my RAID setup in BIOS was done correctly. The system is seeing one drive with a 2 TB capacity. I use my computer to do a lot of hd video editing.
1- Is there a way or to test, monitor, or tweak my RAID 0 setup for optimum performance?
2- Am I actually getting the best out of RAID 0 and my expectations were just too high?
3- Are there specifically " one " type of RAID 0 setup? ( I just want to eliminate the possibility of setting up RAID 0 incorrectly in BIOS ).
AMD 965 125 watt
ATI 5770
700 watt psu
M4a87td EVO
8 gigs of ddr-3 memory
Windows 7 64 bit home
WD 1TB hard drive 64 mb cache/ 6 mbs ( RAID O )
Test All Memory At Once With Memtest?
Sep 3, 2011I am trying to diagnose a problem with my machine, and in so doing I have run memtest overnight (to test all 8GB of RAM--which takes about 12 hours). However, I've read various places that memtest is only reliable testing one stick at a time (I have 4x2GB). I didn't get any errors in 7 passes with all memory in. Does this mean that I'm fine, or should I go back and test each individually?
View 2 Replies View RelatedTest Installation Of Windows 7?
Dec 29, 2011I can't get CS4 web premium to install on my desktop. I've contacted adobe, and they have "helped" me several times, each trying the same thing and then moving me up to the next levelWindows 7, but I don't want to lose the one I currently have. Especially if I still can't install CS4. I have an extra hard drive that I could use. If I install windows 7 on this extra hard drive, can I do so without validating it? I just don't want to validate it and find out that my current installation won't work any more.
View 6 Replies View RelatedPrint Test Is Not Is Performing
Mar 30, 2012My HP 6500 all in one will print test pages but will not print from my computer. It worked fine up until a week ago?
View 2 Replies View RelatedMedia Test Failure?
Jun 10, 2012im trying to reinstall windows from my recovery discs and am getting media test failre check cable message. am I missing a set? i cant seem to find reinstall directions anywhere
View 1 Replies View Related
