System-wide Equalizer For Windows 7
Jun 2, 2010
I've been looking for some time now for a system-wide graphic equalizer. Basically I play a lot of internet radio on my laptop, so the WMP EQ won't do. Also, it doesn't work on games and streaming vids etc.
I've been hearing a lot about the Realtek HD Audio Driver, but can I install that with an Intel soundcard (at least I think it's Intel)? I've downloaded and installed it, rebooted, and nothing happened. There's no icon in the bottomright, and if I try to find the driver the device manager I can't find it either.
View 7 Replies
ADVERTISEMENT
Nov 10, 2010
System Wide spell checker? Does Win 7 have a system wide spell checker, something that will highlight all misspelled words with red underlining, then allow you to right-click on it to select the correct spelling? My win 7 was doing it for a while now it has stopped?
View 9 Replies
View Related
May 29, 2011
And I have no idea how. I noticed that iTunes deleted more then half of my photos off my ipod, but didnt think anything of it, and then i started yahoo messenger and it said it was corrupted and to run a chkdsk. So I did, and this is what it came up with (below). What caused this? All my photos are back, it said it was recovering orphaned files and stuff. But there was too many to count. [code]
View 1 Replies
View Related
Oct 19, 2012
How to block the other systems websites in wide area network?
View 1 Replies
View Related
Oct 17, 2011
just upload 2 image to easy to know it
View 4 Replies
View Related
Mar 27, 2012
We used to have for most Audio drivers back in XP days a decent equalizer.Now all we have it seems is a basic Volume control. I just want the OPEN MIXER on the bottom task bar to have some basic equalisation like it did with XP.Any decent FREE generic equalizer -- I KNOW if I'm using VLC or Winamp they have their own equalizers and they work so my Audio (connexant HD) must have the facility available somewhere.I have some applications that just deliver "Bog standard Sound" to the on board sound card -- I'd like to be able to adjust the sound with a decent equalizer - seems we've GONE BACKWARDS here from XP -- the rest of Windows 7 is fine.
View 3 Replies
View Related
Nov 24, 2011
My screen looks almost bloated, like the scroll bar and task bar are still too large and nothing fits perfectly on the screen, it hangs out over to the left just slightly. It's useable, just obnoxious and it looks awful. The resolution is as high as it will go and my icons are on small.
View 4 Replies
View Related
Jul 8, 2012
I've noticed that sometimes the screen does not appear wide enough. Today I needed to see and copy the screen, but could not. I tried to drag the screen wider but could not
View 2 Replies
View Related
Aug 1, 2012
My dad accidently pressed a button on his monitor and now the image on his monitor looks slightly too wide.Ive pressed the auto adjust button on the monitor to try and fix it, and it says for optimal display I should change the resolution to 1360x768.Ive tried to do this but it just tells me that its "out of range 68.5khz/85hx"
View 5 Replies
View Related
Oct 5, 2009
i have a Sapphire Radeon HD 4890 Vapor-X 1Gb GDDR5 PCIe x16 card running under Windows 7 64b LAST RC7. It gets around on a ASUS M4A79T Deluxe body & a Phenom II X3 955 3.2GHz engine.
my display will not show full screen at any resolution. it leaves 2 black bars ~ 22-3" on the L & R edges only. fills to top and bottom OK.
View 1 Replies
View Related
Feb 10, 2011
If I use Win DVD Maker (WDVDM) to cut a DVD from an .AVI that is wider than 16:9 it plays with the image squashed to fit the 16:9 aspect.Should I use Win Live Move Maker (WLMM) or a third party program to crop the sides or pad the top & bottom of .AVI or other formats, and then WDVDM to cut a disc? Or is there are 'free' third party program that allows me to choose cropping and padding options for extra width .AVI and other formats and encode & burn to DVD in 16:9 or 4:3 ?
View 2 Replies
View Related
Jul 12, 2012
Currently I am running a Windows 7 machine, with a 22 Widescreen LG monitor as my main and a 19 Normal Aspect NEC as my second monitor to the right. I'm also running an nVidia GTX 570. With 285.79 drivers, all is well. However, when I try to upgrade, and I've tried to upgrade to all drivers since, anytime I start up a DX10 or DX11 game (mostly BF3) my main screen offsets approximately 3 inches to the left pushing the game off to the left about 3 inches and leaving a black bar about 3 inches on the right side. This can be fixed by screwing around with the resolution settings and eventually all is fine, but I shouldn't have to screw around with anything.
Other games such as Dragon Age 2 and Battlefield Bad Company 2 actually require me to change my resolution from 1680 x 1050 to 1440 x 900 (I run my screen in 1680 x 1050)
View 6 Replies
View Related
Jun 27, 2011
I am looking for a utility that will analyze HDDs of client computers on a Windows Network. I've looked around and seen utilities that will defrag any number of computers on a network, but really I don't want that as they require an agent to be installed, and I don't want to install anything else on the client computers, they are full to bursting. Anyway...So just a utility or program that would analyze the disk of each client computer, and generate some sort of report or list of client computers in need of a defrag that I would preform during off hours, or schedule to run late at night.
View 5 Replies
View Related
May 6, 2009
I have a Dell Latitude D800 laptop which is some outdated but served me well with vista. The native screen resolution is 1920x1200, and if I understand correctly the nvidia chipset is GeForce FX Go5200.
I don't need to install the native driver if I could only change the resolution to custom since nothing else appears to be not working.
The problem with the natural drivers is this: when I install the nvidia one it says I do not have a compatible chipset, so it leaves me with the D800 video driver. It has only been released for XP and installing it even with changed compatibility mode freezes my screen on startup.
In Vista no drivers were needed I just changed my resolution to 1920x1200 and all was well, what are my options in Windows 7?
View 0 Replies
View Related
Mar 3, 2011
Does anybody know of a add-on for mozzilla firefox so I can set the default settings to make a web page become wider? When I zoom into a web page and then restart mozzilla the web page is back to the default settings.
View 3 Replies
View Related
Jan 23, 2013
how to regain full computer wide screen
View 3 Replies
View Related
Sep 8, 2009
I saw if some folks screen shots, that there must be a way to cause the open programs on the task bar to display wide.. Referring to sergio's theme, and a few others. I have dug into the taskbar options, but not struck gold, anyone know how this can be done?
View 3 Replies
View Related
Nov 10, 2009
Outlook 2007 Task search versus Windows7 computer wide search.
I enter the same keyword (one of the words contained within the title of a completed task) in the Outlook Task search box as I do the Windows 7 orb 'search programs and files.' The Windows 7 search returns the correct search result (along with a lot other results having the same keyword) practically immediately whereas Outlook is still searching...and searching.
If I have index options set to include the C: drive and Outlook, what's going on with Outlook?
View 0 Replies
View Related
Oct 19, 2011
Suddenly my Win 7 Home Premium x64 will not boot. The system starts, POSTs then loads the DVD driver, then the screen goes black (not blank but "lit up" black if that makes sense). Then nothing. If I use Hiren's boot cd I can boot up using the "boot from HDD" option fine and Windows operates normally. System restore to a previous configuration made no difference to the original problem. I cannot boot into Safe Mode. F8 just offers me boot order options.
- Running the Windows 7 DVD I find: "No operating system is listed on the Repair Windows option."
- Running Startup Repair finds the following error: "the partition table does not have a valid system partition" which it claims to have repaired, but the error remains and Windows will still not boot.
I followed this advice:
Boot 7 dvd to system recovery options command prompt. Type: Diskpart
list vol (find the vol letter e.g C or partition number e.g. 1 for the system partition )
Sel vol C ( or sel vol 1, obviously use the correct letter or number)
act exi
My system partition was easily identified and listed as healthy so I selected it and made it active. The problem still remains exactly the same. My system is self built just over a year ago, to my knowledge has been running fine, without any hardware issues. I'm prepared to do a clean install if that's what it takes but if there is a way to fix the partition problem without that I'd like to explore it first.
View 2 Replies
View Related
Apr 30, 2012
I have a WIN -7 system with 1 trig SADA hard drive. I also have a Vista system with a 750mb hard drive from my old computer.Can I install the Vista hard drive into the Win-7 system and boot from either system?
View 1 Replies
View Related
Jul 6, 2012
Would it be possible to download (My Documents) from my XP 32 bit system to a flash drive and load it in my Win.7 64 bit system?
View 3 Replies
View Related
Feb 15, 2013
Living is south FL can be a bitch when the rains come as there often is a ton of accompanying lightening that plays havoc with the electrical system, even though I have surge protectors inside and outside the house. We just had some very heavy rains with lightening and my computer shut down several times, but I could restart it each time...except for the last time when Windows wouldn't startup. At that point, Start Up Repair came into play. Although I routinely backup on an external drive, of course I never did it this month-DUH!Results from SUR were error free (error code=0x0) on all the parameters tested, however there were the following error codes reported:"Unspecified change to the system configuration might have caused the problem." Failed: 0x1fRepair Action: System FilesFailed: x490There were more options to select for a recovery task, but I didn't try them as they didn't seem to be as salient as the two above.
View 6 Replies
View Related
Oct 19, 2012
Did a system restore in Windows 7 and my dual boot system (Windows 7&XP) won't boot. It's looking for a boot device. When I put in a Hiren boot 10.6 disk, the dual boot option is one of a number of alternatives, and it allows me to get into my pc. How can I get back to having the system work like it did before? So it boots to the dual boot option without Hiren.My SSD drive is the main drive for Windows 7 &XP. It has two partitions.
View 1 Replies
View Related
Mar 8, 2012
I am having the following system configuration
XPS L401X Base
Genuine Windows(R) 7 Home Premium 64bit (English)
Intel(R) Core(TM) i7-740QM Processor
6GB 1333MHz DDR3 SDRAM (1 x 2GB + 1 x 4GB)
640GB 7200RPM Hard Drive
Lately whenever i try to start my computer it pass the Dell Bios and then directly goes to the screen which states
Repair your system or Start windows normally When i chose repair system , it start downloading windows files and then launch the windows , but hung up at the sky blue login window with only movable cusor . When i choose to start windows normally it gives me BSOD momentarly ( hard to see the message) and then restarts again . i tried with the advanced boot up options like
repair my computer , all safe modes , restore to last good configuration but it does the same and hangs at windows loging sky blue window .I Tried to run the Dell PSA+ Diagnostic and it returns with 2000-0146 error . As per the Dell online solutions for this type of error ,I tried to reinstall the Hard disk but the problem still exist.
View 3 Replies
View Related
Feb 18, 2012
"Missing operating system" massage is coming when i start my system and i am not able to start. I think because , i had given "mark partition as active" option for one hard dive (E) in disk management when last time i opened. it did not have any data. i did not know, this will make any problem. Now i am not able to boot windows re installation dvd also. i can only take BIOS settings.
View 6 Replies
View Related
Oct 2, 2012
Using preinstalled Win 7 Home Premium 64bit on an HP 6813w Pavilion. The original hard drive, a Hitachi HDS721010CLA332 1Tb crashed.1) System Recovery discs was made along with a System Recovery with System Image disc.2) A more current System Image was made on an external hard drive.The Hitachi was replaced with the same model. Checked bios to make sure it was installed correctly.Under System Recovery, Image Restore, Select a System Image Backup there is nothing in the table to choose from as far as a source (disc drive or external drive).A) System Recovery (3 discs) has the HP preinstall file folder on the 3rd disc but is not read by the System Recovery program.B) Under System Restore, Image Restore, Advanced, it asks for a network or driver to be installed. That opens up the directory of C: which is the external hard drive. Under WindowsImageBackup the computer name is identified followed by three entries:[CODE]It seems to me the Recovery and System Restore discs are not functional. Am not a technical person but I have taken this as far as I know how at this point.Printed out all the instructions from HP and Microsoft to follow step by step but the failed discs will not allow me to move forward.
View 2 Replies
View Related
Aug 11, 2012
I had the brilliant idea to delete the manufacturer's recovery partition on my ASUS Win 7 64-bit laptop, and reclaim that space for my C drive, and now my system is unbootable. I get the error message "autochk program not found" then stop: c000021a Fatal System Error. I have run System Recovery several times to no avail. I tried to do a repair using the Win 7 DVD, but that didn't work either.
View 9 Replies
View Related
Feb 17, 2012
"Missing operating system" massage is coming when i start my system. I think because, i had given "mark partition as active" option for one hard dive (E) in disk management when last time i opened. it did not have any data. i did not know, this will make any problem. Now i am not able to boot windows re installation dvd also. i can only take BIOS settings.
View 2 Replies
View Related
Mar 21, 2011
I want to have a Factory Reset of my computer. In order to launch a System Recovery, I need to create Restore Discs. When I launch the Recovery Disc Creation, it says:"This computer does not have a burning drive, which is required to make DVDs. Please contact HP Support for asistance."My computer did not come with a build in CD Drive. Even plugging in a USB CD Drive will not make creating the discs possible. So. I ask you. How can I reset my computer to Factory Condition?
Computer Specs:
Windows 7 Home Premium (64-Bit)
Model: HP Pavillion dm3 Notebook PC
edit: This notebook came with a Recovery Partition built in.
View 4 Replies
View Related
Jun 14, 2012
I am looking to upgrade my desktop from an xp to 7. System builders are very cheap which concerns me. What is the difference from a system builder and the regular version.
View 4 Replies
View Related
May 8, 2012
I want to make a recovery disc to reset my entire 4 partition dual boot hard drive back to its current state. the recovery would reset both xp and win 7 which i have dual booting. can i make one single image to do this without it screwing up my boot loaders etc? what should i use? 3rd party software?
View 9 Replies
View Related
