I am looking for a utility that will analyze HDDs of client computers on a Windows Network. I've looked around and seen utilities that will defrag any number of computers on a network, but really I don't want that as they require an agent to be installed, and I don't want to install anything else on the client computers, they are full to bursting. Anyway...So just a utility or program that would analyze the disk of each client computer, and generate some sort of report or list of client computers in need of a defrag that I would preform during off hours, or schedule to run late at night.
The data provided by the CBS.log is massive - 5.4MB of text is a years worth of reading. Has anybody figured out a way to quickly identify the corrupted files ?? I have read this Microsoft page
I get BSOD's whenever I do anything even remotely cpu/gpu intensive, be it 3D gaming, watching high def videos for prolonged periods or sometimes even installing software.
I have never had a month without a BSOD. Every time I analyze the dump file, the probably cause is different. All I want is a stable Windows machine that I don't have to worry about when I go to bed. Is that too much to ask? nyway, system info:Windows 7 64 bitRAM: G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500)HDD: all over the place but 2x RAID0 arraysCPU: Intel Core 2 Duo E8400 Wolfdale 3.0GHz LGA 775 65WMoBo: GIGABYTE GA-EP45C-UD3R LGA 775 Intel P45PSU: 700WI built this box In September of 2009 (2 yrs ago)
I was shocked to see how large my AppData area has gotten since the Windows 7 installation. I'm finding it hard to believe that everything in there is still "in play". Is there a way to do a safe, examined cleanup of these directories?
i have some probs now so iv ran sfc /scannow and i got that: "Windows Resource Protection found corrupt files and was unable to fix some of them..."
it also told to look at the folder of the log file to found the cbs.log and then i ran this command to pull out the actual probs: findstr /c:"[SR]" %windir%LogsCBSCBS.log >"%userprofile%Desktopsfcdetails.txt"
This command have created an sfcdetails text file. here: Download sfcdetails.txt
My screen looks almost bloated, like the scroll bar and task bar are still too large and nothing fits perfectly on the screen, it hangs out over to the left just slightly. It's useable, just obnoxious and it looks awful. The resolution is as high as it will go and my icons are on small.
I've noticed that sometimes the screen does not appear wide enough. Today I needed to see and copy the screen, but could not. I tried to drag the screen wider but could not
My dad accidently pressed a button on his monitor and now the image on his monitor looks slightly too wide.Ive pressed the auto adjust button on the monitor to try and fix it, and it says for optimal display I should change the resolution to 1360x768.Ive tried to do this but it just tells me that its "out of range 68.5khz/85hx"
i have a Sapphire Radeon HD 4890 Vapor-X 1Gb GDDR5 PCIe x16 card running under Windows 7 64b LAST RC7. It gets around on a ASUS M4A79T Deluxe body & a Phenom II X3 955 3.2GHz engine.
my display will not show full screen at any resolution. it leaves 2 black bars ~ 22-3" on the L & R edges only. fills to top and bottom OK.
If I use Win DVD Maker (WDVDM) to cut a DVD from an .AVI that is wider than 16:9 it plays with the image squashed to fit the 16:9 aspect.Should I use Win Live Move Maker (WLMM) or a third party program to crop the sides or pad the top & bottom of .AVI or other formats, and then WDVDM to cut a disc? Or is there are 'free' third party program that allows me to choose cropping and padding options for extra width .AVI and other formats and encode & burn to DVD in 16:9 or 4:3 ?
Currently I am running a Windows 7 machine, with a 22 Widescreen LG monitor as my main and a 19 Normal Aspect NEC as my second monitor to the right. I'm also running an nVidia GTX 570. With 285.79 drivers, all is well. However, when I try to upgrade, and I've tried to upgrade to all drivers since, anytime I start up a DX10 or DX11 game (mostly BF3) my main screen offsets approximately 3 inches to the left pushing the game off to the left about 3 inches and leaving a black bar about 3 inches on the right side. This can be fixed by screwing around with the resolution settings and eventually all is fine, but I shouldn't have to screw around with anything.
Other games such as Dragon Age 2 and Battlefield Bad Company 2 actually require me to change my resolution from 1680 x 1050 to 1440 x 900 (I run my screen in 1680 x 1050)
I've been looking for some time now for a system-wide graphic equalizer. Basically I play a lot of internet radio on my laptop, so the WMP EQ won't do. Also, it doesn't work on games and streaming vids etc.
I've been hearing a lot about the Realtek HD Audio Driver, but can I install that with an Intel soundcard (at least I think it's Intel)? I've downloaded and installed it, rebooted, and nothing happened. There's no icon in the bottomright, and if I try to find the driver the device manager I can't find it either.
I have a Dell Latitude D800 laptop which is some outdated but served me well with vista. The native screen resolution is 1920x1200, and if I understand correctly the nvidia chipset is GeForce FX Go5200.
I don't need to install the native driver if I could only change the resolution to custom since nothing else appears to be not working.
The problem with the natural drivers is this: when I install the nvidia one it says I do not have a compatible chipset, so it leaves me with the D800 video driver. It has only been released for XP and installing it even with changed compatibility mode freezes my screen on startup.
In Vista no drivers were needed I just changed my resolution to 1920x1200 and all was well, what are my options in Windows 7?
And I have no idea how. I noticed that iTunes deleted more then half of my photos off my ipod, but didnt think anything of it, and then i started yahoo messenger and it said it was corrupted and to run a chkdsk. So I did, and this is what it came up with (below). What caused this? All my photos are back, it said it was recovering orphaned files and stuff. But there was too many to count. [code]
Does anybody know of a add-on for mozzilla firefox so I can set the default settings to make a web page become wider? When I zoom into a web page and then restart mozzilla the web page is back to the default settings.
I saw if some folks screen shots, that there must be a way to cause the open programs on the task bar to display wide.. Referring to sergio's theme, and a few others. I have dug into the taskbar options, but not struck gold, anyone know how this can be done?
System Wide spell checker? Does Win 7 have a system wide spell checker, something that will highlight all misspelled words with red underlining, then allow you to right-click on it to select the correct spelling? My win 7 was doing it for a while now it has stopped?
All PSU SATA power cables I've seen have only four connectors on each cable. Assuming the rail can handle the load and the wire used is large enough to avoid a voltage drop, is there any reason why there can't be more than four HDDs on a cable?
What I am wanting to do is run an SSD (boot/program) and six data drives (probably 2 TB WD Greens) on a single cable that I can make up (the PSU is a modular Corsair HX750; a bit oversized but that will cut down on heat and, hopefully, increase the life of the PSU) to cut down on cable clutter (the case I want to use is a bit tight; space to put it is a problem so it needs to be small). The original cables are made with 18 AWG wire. By using #14 AWG wire, the calculated voltage drop at the last HDD in the string (the SDD would be first) will actually be less than on the Corsair cable. The computer would read or write to no more than two of the HDDs (and the SDD) at any one time. There will also be two hot swap bays (3.5" and 2.5") in the computer (for making back ups) as well as an optical drive but each one of those three will get their own cable.
I have 2 HDDs that I want to switch the OS of each one to the other. One is a laptop 140GB HD that has Windows 7 64-bit and the other is a Desktop 150GB HD with Windows XP 32-bit. The laptops HD was pre-installed with the OS and the Desktop is unknown. Just as an fyi the laptops cd drive is broken and the desktops doesn't burn. What are my options on how to switch the two?
How to set up my 120 GB SSD as just my OS Drive then use my 1 TB and my 750 and another 750 for data etc. So I have backed up all my data from my current install (right now I am running my OS from the 1 tb and the SSD isn't even being used yet. I just wanted to know the best way to set it up so I can use the SSD JUST FOR THE OS and then install programs and steam etc in the 1 TB (cuz i got at least 500 GB of games from steam). Can I just install the OS on the SSD then format my 1 TB and make 3 folders Users, Program Files and Program Files (x86), and then install programs in to the appropriate folders? User Profiles - Create and Move During Windows 7 Installation.
I am running VMWare Workstation.I am very new to this.After a couple installs of the Workstation, I was able to create and power on Linux VMs on the Workstation.But the thing is it just sees itself (the VM) and the removable devices I put on there, but not the HDDs on my computer.
I'm new around here so, if you've seen this before, please bear with me.I have a computer with 3 hard disks in it as follows.Patriot Pyro 120 GB on Windows 7 Ultimate x64 (installed first).WD Velociraptor 450 GB on Windows 8 Pro x64 (installed second).Samsung something 2 TB storage (forget about this one).The 2 operating systems are completely independent and functioning properly; obviously, the SSD (Pyro) is set to boot first in the bios and, at start-up, there's no boot manager asking me which OS I intend to use. Basically, every time I want to logon on my Velociraptor with Windows 8 I have to press F8 at start-up and choose from the given list of bootable HDDs.Now, I've tried EasyBCD without luck and I've read somewhere that, apparently, the Windows 7 boot manager can't boot a Windows 8 partition so, my question is, is there a way to add my Windows 8 Velociraptor to the boot manager of the first booting HDD, i.e the SSD with Windows 7?
i have an odd 5900 RPM HDD that i need to swap out. i'm going to swap it out mainly because it's better suited for storage/backup rather than being my main HDD for usage/boot-up.
i don't want to reinstall Windows 7 (7100) and i want to copy everything from HDD "a" to HDD "b". any ideas/suggestions/comments?
I've found this guide Windows 7 Installation - Transfer to a New Computer for changing all my components except HDD.My question is, I currently use my install as an HTPC. If I use the sysprep method, will the codecs (ffdshow etc) work correctly afterwards, or will I have to go through installing them all again?I understand graphics drivers will need re-installing.
I installed Windows 7 on a 20GB partition on a 2TB HDD for my PC on a AMD E-350 APU motherboard.
1) Can I use the other partition that doesn't have Windows 7 installed and RAID it with another empty HDD?
2) Will I be able to add another HDD down the road and add it to the RAID without erasing all my data without using a RAID Manager like Intel Rapid Storage?
If Yes: How can I do this?
If No: Is there a RAID Manager that I can use that will allow me to do this?
anybody else got this problem? anybody able to fix this? seems like a bug to me, not sure though. I also sometimes get the message "you DESTINATION file is too big for the file you are copying!" any solutions also?
I was given two External usb HDDs both 80gb each, my friend said they were totally unusable on his laptops they were corrupted but using them on my laptop I successfully formatted and am using them as we speak. I'm just concerned with whether or not I will lose all i've backed up onto these External HDDs because of them not working on my friend's laptops but working perfectly fine on mine!
I recently had Windows 7 Pro installed onto my 80GB HDD. This was the only HDD plugged in when the installation too place.
Now, when I plug in either of my other internal HDDs, windows will not detect either. I have tried different jumper and IDE cable settings but it will not detect either of the other hard drives.
Also, while im thinking about it, what is the best way to set up in terms of HDDS and IDE cables and jumpers?
I guess windows 7 should be plugged into IDE 1 Primary Does it matter if i used IDE 1 secondary or IDE 2 primary/secdondary for disc drives and other internal hard drives? Should I have my windows HDD jumper set to 'master with slave' and any other HDD(s) set to 'slave'?
