My dad accidently pressed a button on his monitor and now the image on his monitor looks slightly too wide.Ive pressed the auto adjust button on the monitor to try and fix it, and it says for optimal display I should change the resolution to 1360x768.Ive tried to do this but it just tells me that its "out of range 68.5khz/85hx"
View 5 RepliesDoes anybody know of a add-on for mozzilla firefox so I can set the default settings to make a web page become wider? When I zoom into a web page and then restart mozzilla the web page is back to the default settings.
View 3 Replies View RelatedThe image is smaller than the monator. There is an inch border on both sides
View 2 Replies View RelatedMy screen looks almost bloated, like the scroll bar and task bar are still too large and nothing fits perfectly on the screen, it hangs out over to the left just slightly. It's useable, just obnoxious and it looks awful. The resolution is as high as it will go and my icons are on small.
View 4 Replies View RelatedI've noticed that sometimes the screen does not appear wide enough. Today I needed to see and copy the screen, but could not. I tried to drag the screen wider but could not
View 2 Replies View Relatedi have a Sapphire Radeon HD 4890 Vapor-X 1Gb GDDR5 PCIe x16 card running under Windows 7 64b LAST RC7. It gets around on a ASUS M4A79T Deluxe body & a Phenom II X3 955 3.2GHz engine.
my display will not show full screen at any resolution. it leaves 2 black bars ~ 22-3" on the L & R edges only. fills to top and bottom OK.
If I use Win DVD Maker (WDVDM) to cut a DVD from an .AVI that is wider than 16:9 it plays with the image squashed to fit the 16:9 aspect.Should I use Win Live Move Maker (WLMM) or a third party program to crop the sides or pad the top & bottom of .AVI or other formats, and then WDVDM to cut a disc? Or is there are 'free' third party program that allows me to choose cropping and padding options for extra width .AVI and other formats and encode & burn to DVD in 16:9 or 4:3 ?
View 2 Replies View RelatedCurrently I am running a Windows 7 machine, with a 22 Widescreen LG monitor as my main and a 19 Normal Aspect NEC as my second monitor to the right. I'm also running an nVidia GTX 570. With 285.79 drivers, all is well. However, when I try to upgrade, and I've tried to upgrade to all drivers since, anytime I start up a DX10 or DX11 game (mostly BF3) my main screen offsets approximately 3 inches to the left pushing the game off to the left about 3 inches and leaving a black bar about 3 inches on the right side. This can be fixed by screwing around with the resolution settings and eventually all is fine, but I shouldn't have to screw around with anything.
Other games such as Dragon Age 2 and Battlefield Bad Company 2 actually require me to change my resolution from 1680 x 1050 to 1440 x 900 (I run my screen in 1680 x 1050)
I am looking for a utility that will analyze HDDs of client computers on a Windows Network. I've looked around and seen utilities that will defrag any number of computers on a network, but really I don't want that as they require an agent to be installed, and I don't want to install anything else on the client computers, they are full to bursting. Anyway...So just a utility or program that would analyze the disk of each client computer, and generate some sort of report or list of client computers in need of a defrag that I would preform during off hours, or schedule to run late at night.
View 5 Replies View RelatedI've been looking for some time now for a system-wide graphic equalizer. Basically I play a lot of internet radio on my laptop, so the WMP EQ won't do. Also, it doesn't work on games and streaming vids etc.
I've been hearing a lot about the Realtek HD Audio Driver, but can I install that with an Intel soundcard (at least I think it's Intel)? I've downloaded and installed it, rebooted, and nothing happened. There's no icon in the bottomright, and if I try to find the driver the device manager I can't find it either.
I have a Dell Latitude D800 laptop which is some outdated but served me well with vista. The native screen resolution is 1920x1200, and if I understand correctly the nvidia chipset is GeForce FX Go5200.
I don't need to install the native driver if I could only change the resolution to custom since nothing else appears to be not working.
The problem with the natural drivers is this: when I install the nvidia one it says I do not have a compatible chipset, so it leaves me with the D800 video driver. It has only been released for XP and installing it even with changed compatibility mode freezes my screen on startup.
In Vista no drivers were needed I just changed my resolution to 1920x1200 and all was well, what are my options in Windows 7?
And I have no idea how. I noticed that iTunes deleted more then half of my photos off my ipod, but didnt think anything of it, and then i started yahoo messenger and it said it was corrupted and to run a chkdsk. So I did, and this is what it came up with (below). What caused this? All my photos are back, it said it was recovering orphaned files and stuff. But there was too many to count. [code]
View 1 Replies View Relatedhow to regain full computer wide screen
View 3 Replies View RelatedI saw if some folks screen shots, that there must be a way to cause the open programs on the task bar to display wide.. Referring to sergio's theme, and a few others. I have dug into the taskbar options, but not struck gold, anyone know how this can be done?
View 3 Replies View RelatedHow to block the other systems websites in wide area network?
View 1 Replies View RelatedSystem Wide spell checker? Does Win 7 have a system wide spell checker, something that will highlight all misspelled words with red underlining, then allow you to right-click on it to select the correct spelling? My win 7 was doing it for a while now it has stopped?
View 9 Replies View RelatedOS: Windows 7 Home Premium 32 bit The windows system image backed up on my external hard drive (2TB WD USB3) is not showing while restoring the PC from an image.
The only option available is my hard drive partition on which i also had saved a system image. Though windows recommends External hard drive for backing up image when backing up the system.
Outlook 2007 Task search versus Windows7 computer wide search.
I enter the same keyword (one of the words contained within the title of a completed task) in the Outlook Task search box as I do the Windows 7 orb 'search programs and files.' The Windows 7 search returns the correct search result (along with a lot other results having the same keyword) practically immediately whereas Outlook is still searching...and searching.
If I have index options set to include the C: drive and Outlook, what's going on with Outlook?
I need a little help figuring this out. I made a backup image a while back on my network. Now that I want to re-image, I reboot as requested, wait for it to load, and Windows says it can't find my backup, "if it is on a network, close this window , type the network location."Putting in the network location does nothing, I'm just returned to the screen where it would list the backup image if it had found it, but there's nothing there.Thinking perhaps my NAS was the problem I copied the image onto a portable hard drive, but after rebooting into the restore program, Windows 7 doesn't find the USB drive.
View 9 Replies View RelatedWith either of these two Products, if I create an Image will the Image "include" everything on the Partition?What I'm asking is, in the event I "delete" something from a Partition, and presuming the "deleted" item is not overwritten, will the "deleted" item be part of an Image created AND restorable by Windows or Acronis?
View 7 Replies View Relatedif i do a back up image of my C drive can i then create a partition on the that HDD and then create a second OS using that image of C drive?
hope that makes sense
also can you update images or would you need to create new ones to keep them upto date?
now am using win7 hme basic, can u tel me vch software is helpful 2 chage 2d image to 3d image
View 2 Replies View RelatedI have a three monitor set up. Whenever I open up a browser, either internet explorer or google chrome on monitors 2 and 3, after a few seconds it automatically drags my browser into my main monitor(monitor 1, where my start button and status bar is located)
View 3 Replies View RelatedI have a setup with 6 monitors. Today my main monitor broke and I couldn't find a way to shut the PC down since I couldn't access the main desktop to get to the Start menu.Is there a way to change which monitor is the main monitor without having access to the current main monitor?
View 5 Replies View RelatedI am running a dual monitor setup with my TV hooked up via HDMI to my laptop.
Everything was working fine before, I always had the laptop as my main display yet I could play a video or a game fullscreen on the TV.
Since a couple of days, as soon as I put something in fullscreen, it immediately goes on my laptop, regardless if it's open on my TV or my laptop. I don't remember changing/installing anything that could've changed that...
I checked a bit in the AMD vision software and the Windows control pannel but I can't seem to solve my problem without switching my TV as the main display. I also made a quick search on google as well as here but the problems were mainly with Flash, which isn't in cause here.
Here are my system specs:
Toshiba Satellite L75D
Windows 7 home premium 64-bit
AMD Radeon 6520G
I have just did a clean install of Windows 7 ultimate from XP and I am unable to get my dual monitors to work like they did in XP.
I have a DVI Radeon graphics card plugged into the agp slot, and a Nvidia geforce vga adapter plugged into a pci slot of my dell optiplex 755. When I am in the screen resolution settings the second monitor cannot be detected.
In bios I have 2 options under primary video adapter and they are auto, and onboard card. When set to auto the Nvidia card gets a signal but the Radeon does not. There are no conflicts in the device manager, and all of the drivers are up to date.
When I change the bios option to onboard card the Radeon adapter gets a signal but the other monitor cannot be detected and in device manager there is a yellow exclamation mark next to Standard VGA adapter and a code 10 error that states the device could not be started.
I have powered down, and unplugged every cable, I also tried to use the integrated VGA adapter to the Intel G31/G33/Q33/Q35 Graphics Controller but the computer will not even boot. I get
"System Halted
Attention Unsupported Video Configuration Detected"
I have two monitors, both work fine as standalone but Windows will not detect either as a secondary.
Please help me someone, I am so used to having my helpdesk email open in one monitor and all of my other work in the other monitor.
This computer is running an ATI Radeon HD 2400 Pro. It does support dual monitors...(I've had dual monitors active on this card before, but never on Windows 7.) But since installing windows 7, I can't even get it to detect the second monitor. I want to run the setup with the CRT as the primary monitor and the HD as the secondary.
View 7 Replies View RelatedI recently had an older HP Pavilion Media Center m7760n Desktop PC rebuilt. The old power supply fried the motherboard so I need to get a new power supply and motherboard. Here are my current specs.
Mainboard : Asus P5QPL-VM EPU
Chipset : Intel G41
Processor : Intel Core 2 Duo E6420 @ 2133 MHz
Physical Memory : 2048 MB (2 x 1024 DDR2-SDRAM )
Video Card : Intel(R) G41 Express Chipset (Microsoft Corporation - WDDM 1.1)
Hard Disk : WDC (1000 GB)
[code]....
As you can see from above, the "video card" is actually integrated into the motherboard.The computer works perfectly except for one major problem. I have 2 monitors, one is 22" with 1680 x 1050 resolution and the other is a 15" monitor with 1024 x 768 resolution. At the back of my computer I have a VGA port and a DVI port. The 15" is connected to the VGA port and the 22" is connected to the DVI port.When first starting the computer, the 15" monitor was recognized as the primary monitor while the 22" was recognized as the secondary monitor. No problem. I simply went to the display settings and set the 22" to be the primary monitor and the 15" to be the secondary monitor. Unfortunately, this setting seems to reset as soon as I reboot the computer. The 15" is always set as the primary monitor on start up, forcing me to set the proper settings all over again. What's worse is that even after I have set the proper settings, they sometimes revert back when using Media Center or other programs. Worse yet, sometimes the monitors both go completely black ... as if the monitor settings were about to switch but got locked up some how.I'm assuming that perhaps the on board video has a primary port (VGA) and a secondary port (DVI) but even still, shouldn't Windows 7 be able to over-ride this and save these settings so that the monitor settings remain the same during startup and regular usage?
I am attempting to create a backup image of my Windows 7 OS but when using the native Backup utility I only see a way to create an image with all of my files attached to the image when all I want is just a backup of just the barebones system. I lost my original Windows 7 Install disk so was hoping there was a way to get a copy of the OS since I just recently ordered an SSD. Basically I was hoping to move my OS install over to the SSD while keeping my files on my current HDD intact.
View 5 Replies View RelatedI'm using a television (32p) as a second monitor in extended mode so that I can watch a movie in the TV and play a game in the monitor (this was my main goal). Monitor and TV lays in two different ambients, both connected to the same pc, one by normal VGA cable and the other by HDMI. I managed to differentiate the audio output so that VLC player sends it's audio to the HDMI (so that only the TV plays it) and the rest of system sounds, media players and games outputs to the speakers (basically only the VLC audio is directed to another output device). I reached my goal so that I can watch a movie fullscreen in the TV and play a game in the monitor fullscreen too without any interference from one another (nor audio or video).
The thing is, because I have the TV in another ambient I can't actually see what's going on in it, as I just "throw" the VLC window to the TV from my main monitor. And here's the question: There's a way to see the TV's desktop in my monitor? Without having to set it as main monitor so to not really switch between desktops.. The perfect thing would be if I could see the TV's desktop in a window like in remote desktops applications.
I have AT&T DSL and it just drops out, I have a 2 wire router and the DSL and Internet lights will flash red when it drops, I have had this problem for almost a year and AT&T will run a useless test and tell me everything is fine. I have searched for 3 days trying to find a Broad Band Monitor to let me know when it drops and for how long, also how many times while I am at work, or just not on the PC.
View 2 Replies View Related