System Rating Is Not Available In Windows 7?
Oct 13, 2012System rating is not available in windows 7
View 1 RepliesSystem rating is not available in windows 7
View 1 RepliesIve done all i can think of but i still recive this error. Any Ideas?
View 4 Replies View RelatedI can't get media player to run on the system.I installed Directx 9.0c.
Also when attempting system rating I get an error saying "could not measure video playback performance"?
Suggestions?
I recently bought 3 Hitachi 1tb hdd's (5400 Rpm, 8M cache) and added it to my Samsung, 7200 Rpm HDD 32M cache, So currently i put them on raid 0. My Samsung itself got me 5.9 win 7 rating currently all together 4 hDD's got me 6.5. I was wondering should i replace my Hitachi with 7200 rpm and 32m cache and will it increase the rate?
View 7 Replies View RelatedSo Windows 7 gives me a graphics rating of 1.0, when I have no graphics card in the computer. Will a 16MB graphics card get it up to at least 3.0?
View 3 Replies View Relatedjust put together a hp dv7 1243 with windows 7 and developer using a partition have problem with both windows wont activate wont join homegroup and updates wont work other than that works great almost fine the way it is added ati control panel improved performance cant get a windows experience rating since i installed the control panel could this be a software problem like a driver any body know ?
View 1 Replies View RelatedI just built a new computer everything is completely compatible with each other. I installed windows 7 pro 64 bit and i seem to be having problems accessing certain details in my control panel. I can't run windows rating index or device management the window just freezes up. the same is happening for trying to open the action center the windows just seem to keep freezing. when in safe mode everything runs perfectly fine but when i restart back to normal the same problem occurs anyone know what might be causing this? I don't have a virus the computer has been running for not even a day with limited internet use.
View 3 Replies View Relatedtoday I thought that I haven't updated my WEI some time and ran the assessment. Now all of a sudden my processor's rating dropped from 7.7 to 7.6. Is that normal that it drops for some strange reason or what might be causing this?
View 5 Replies View Relatedbefore i upgraded i had a 5.3 on vista across the board i researched window 7 and it said that the rating was now 7.9 and your upgrade would not affect your computer assessment and gave an example of 2.9 in vista staying 2.9 in windows7 yet when i upgraded my assessment jumped to 6.4. sine ms said that wouldnt happen whats up???
View 4 Replies View RelatedHere my problem, there only 1.0 Rating on my Graphic Card, my spec:
[code]...
Is there something wrong with my graphic card? i have downloaded the latest driver but when i try to get the rating, my pc will shutdown.
before i upgrade wndows vista to wndows 7, my rating is 3.8, but after upgrade my rating 3.3, WHY??
View 2 Replies View Relatedmy windows is 7 ultimate.but I can't activate the aero themes cause the rating is lower..
View 2 Replies View RelatedCannot display and play clips with a 4-5 star rating even though it is an auto playlist.
View 1 Replies View RelatedI just finished building a new computer last week. It runs very well, and it scored a 7.8 out of 7.9 overall on the Windows User Experience Rating. The problem I am having is that I had to reinstall windows (I messed up the first installation) and now when I try to run the assessment again it always crashes on "Direct3D 10 Texture Load Assessment."
I have all the latest drivers and DirectX 11 installed. Any idea why it would do this when it did not on my previous Windows installation?
My i7 990X is currently at 4.65 GHz. I was using MSI afterburner to overclock my GPU, but I confirmed that it is not the problem. Full computer specs in my profile.
In my windows 7 rating i have got 6.3 in gaming graphics but in graphics i have got only 4.9. Why this is happening? A graphics card which is good for gaming is that not good for desktop aero graphics?
View 3 Replies View RelatedSuddenly my Win 7 Home Premium x64 will not boot. The system starts, POSTs then loads the DVD driver, then the screen goes black (not blank but "lit up" black if that makes sense). Then nothing. If I use Hiren's boot cd I can boot up using the "boot from HDD" option fine and Windows operates normally. System restore to a previous configuration made no difference to the original problem. I cannot boot into Safe Mode. F8 just offers me boot order options.
- Running the Windows 7 DVD I find: "No operating system is listed on the Repair Windows option."
- Running Startup Repair finds the following error: "the partition table does not have a valid system partition" which it claims to have repaired, but the error remains and Windows will still not boot.
I followed this advice:
Boot 7 dvd to system recovery options command prompt. Type: Diskpart
list vol (find the vol letter e.g C or partition number e.g. 1 for the system partition )
Sel vol C ( or sel vol 1, obviously use the correct letter or number)
act exi
My system partition was easily identified and listed as healthy so I selected it and made it active. The problem still remains exactly the same. My system is self built just over a year ago, to my knowledge has been running fine, without any hardware issues. I'm prepared to do a clean install if that's what it takes but if there is a way to fix the partition problem without that I'd like to explore it first.
I have a WIN -7 system with 1 trig SADA hard drive. I also have a Vista system with a 750mb hard drive from my old computer.Can I install the Vista hard drive into the Win-7 system and boot from either system?
View 1 Replies View RelatedWould it be possible to download (My Documents) from my XP 32 bit system to a flash drive and load it in my Win.7 64 bit system?
View 3 Replies View RelatedLiving is south FL can be a bitch when the rains come as there often is a ton of accompanying lightening that plays havoc with the electrical system, even though I have surge protectors inside and outside the house. We just had some very heavy rains with lightening and my computer shut down several times, but I could restart it each time...except for the last time when Windows wouldn't startup. At that point, Start Up Repair came into play. Although I routinely backup on an external drive, of course I never did it this month-DUH!Results from SUR were error free (error code=0x0) on all the parameters tested, however there were the following error codes reported:"Unspecified change to the system configuration might have caused the problem." Failed: 0x1fRepair Action: System FilesFailed: x490There were more options to select for a recovery task, but I didn't try them as they didn't seem to be as salient as the two above.
View 6 Replies View RelatedDid a system restore in Windows 7 and my dual boot system (Windows 7&XP) won't boot. It's looking for a boot device. When I put in a Hiren boot 10.6 disk, the dual boot option is one of a number of alternatives, and it allows me to get into my pc. How can I get back to having the system work like it did before? So it boots to the dual boot option without Hiren.My SSD drive is the main drive for Windows 7 &XP. It has two partitions.
View 1 Replies View RelatedI am having the following system configuration
XPS L401X Base
Genuine Windows(R) 7 Home Premium 64bit (English)
Intel(R) Core(TM) i7-740QM Processor
6GB 1333MHz DDR3 SDRAM (1 x 2GB + 1 x 4GB)
640GB 7200RPM Hard Drive
Lately whenever i try to start my computer it pass the Dell Bios and then directly goes to the screen which states
Repair your system or Start windows normally When i chose repair system , it start downloading windows files and then launch the windows , but hung up at the sky blue login window with only movable cusor . When i choose to start windows normally it gives me BSOD momentarly ( hard to see the message) and then restarts again . i tried with the advanced boot up options like
repair my computer , all safe modes , restore to last good configuration but it does the same and hangs at windows loging sky blue window .I Tried to run the Dell PSA+ Diagnostic and it returns with 2000-0146 error . As per the Dell online solutions for this type of error ,I tried to reinstall the Hard disk but the problem still exist.
"Missing operating system" massage is coming when i start my system and i am not able to start. I think because , i had given "mark partition as active" option for one hard dive (E) in disk management when last time i opened. it did not have any data. i did not know, this will make any problem. Now i am not able to boot windows re installation dvd also. i can only take BIOS settings.
View 6 Replies View RelatedUsing preinstalled Win 7 Home Premium 64bit on an HP 6813w Pavilion. The original hard drive, a Hitachi HDS721010CLA332 1Tb crashed.1) System Recovery discs was made along with a System Recovery with System Image disc.2) A more current System Image was made on an external hard drive.The Hitachi was replaced with the same model. Checked bios to make sure it was installed correctly.Under System Recovery, Image Restore, Select a System Image Backup there is nothing in the table to choose from as far as a source (disc drive or external drive).A) System Recovery (3 discs) has the HP preinstall file folder on the 3rd disc but is not read by the System Recovery program.B) Under System Restore, Image Restore, Advanced, it asks for a network or driver to be installed. That opens up the directory of C: which is the external hard drive. Under WindowsImageBackup the computer name is identified followed by three entries:[CODE]It seems to me the Recovery and System Restore discs are not functional. Am not a technical person but I have taken this as far as I know how at this point.Printed out all the instructions from HP and Microsoft to follow step by step but the failed discs will not allow me to move forward.
View 2 Replies View RelatedI had the brilliant idea to delete the manufacturer's recovery partition on my ASUS Win 7 64-bit laptop, and reclaim that space for my C drive, and now my system is unbootable. I get the error message "autochk program not found" then stop: c000021a Fatal System Error. I have run System Recovery several times to no avail. I tried to do a repair using the Win 7 DVD, but that didn't work either.
View 9 Replies View Related"Missing operating system" massage is coming when i start my system. I think because, i had given "mark partition as active" option for one hard dive (E) in disk management when last time i opened. it did not have any data. i did not know, this will make any problem. Now i am not able to boot windows re installation dvd also. i can only take BIOS settings.
View 2 Replies View RelatedI want to have a Factory Reset of my computer. In order to launch a System Recovery, I need to create Restore Discs. When I launch the Recovery Disc Creation, it says:"This computer does not have a burning drive, which is required to make DVDs. Please contact HP Support for asistance."My computer did not come with a build in CD Drive. Even plugging in a USB CD Drive will not make creating the discs possible. So. I ask you. How can I reset my computer to Factory Condition?
Computer Specs:
Windows 7 Home Premium (64-Bit)
Model: HP Pavillion dm3 Notebook PC
edit: This notebook came with a Recovery Partition built in.
I am looking to upgrade my desktop from an xp to 7. System builders are very cheap which concerns me. What is the difference from a system builder and the regular version.
View 4 Replies View RelatedI want to make a recovery disc to reset my entire 4 partition dual boot hard drive back to its current state. the recovery would reset both xp and win 7 which i have dual booting. can i make one single image to do this without it screwing up my boot loaders etc? what should i use? 3rd party software?
View 9 Replies View RelatedHow to Automatically Create A System Restore Point at Startup ?
View 0 Replies View Relatedis it possible to copy a device driver from one system to another compatible system? I just installed windows 7 pro (64bit) on my Dell Optiplex 380, but no ethernet controller so i cant use it on a network.
View 3 Replies View Relatedwhenever i boot my pc i starts making sounds for like 15 secs and later asks me t choose my operating. this started wheni removed my battery for like 3 weeks and then inserted it back. am using acer mini.
View 5 Replies View Related