Windows 7 Gives A Graphics Rating Of 1.0?
May 13, 2012So Windows 7 gives me a graphics rating of 1.0, when I have no graphics card in the computer. Will a 16MB graphics card get it up to at least 3.0?
View 3 RepliesSo Windows 7 gives me a graphics rating of 1.0, when I have no graphics card in the computer. Will a 16MB graphics card get it up to at least 3.0?
View 3 RepliesIn my windows 7 rating i have got 6.3 in gaming graphics but in graphics i have got only 4.9. Why this is happening? A graphics card which is good for gaming is that not good for desktop aero graphics?
View 3 Replies View RelatedI recently bought 3 Hitachi 1tb hdd's (5400 Rpm, 8M cache) and added it to my Samsung, 7200 Rpm HDD 32M cache, So currently i put them on raid 0. My Samsung itself got me 5.9 win 7 rating currently all together 4 hDD's got me 6.5. I was wondering should i replace my Hitachi with 7200 rpm and 32m cache and will it increase the rate?
View 7 Replies View RelatedSystem rating is not available in windows 7
View 1 Replies View Relatedjust put together a hp dv7 1243 with windows 7 and developer using a partition have problem with both windows wont activate wont join homegroup and updates wont work other than that works great almost fine the way it is added ati control panel improved performance cant get a windows experience rating since i installed the control panel could this be a software problem like a driver any body know ?
View 1 Replies View RelatedI just built a new computer everything is completely compatible with each other. I installed windows 7 pro 64 bit and i seem to be having problems accessing certain details in my control panel. I can't run windows rating index or device management the window just freezes up. the same is happening for trying to open the action center the windows just seem to keep freezing. when in safe mode everything runs perfectly fine but when i restart back to normal the same problem occurs anyone know what might be causing this? I don't have a virus the computer has been running for not even a day with limited internet use.
View 3 Replies View Relatedtoday I thought that I haven't updated my WEI some time and ran the assessment. Now all of a sudden my processor's rating dropped from 7.7 to 7.6. Is that normal that it drops for some strange reason or what might be causing this?
View 5 Replies View RelatedIve done all i can think of but i still recive this error. Any Ideas?
View 4 Replies View Relatedbefore i upgraded i had a 5.3 on vista across the board i researched window 7 and it said that the rating was now 7.9 and your upgrade would not affect your computer assessment and gave an example of 2.9 in vista staying 2.9 in windows7 yet when i upgraded my assessment jumped to 6.4. sine ms said that wouldnt happen whats up???
View 4 Replies View RelatedHere my problem, there only 1.0 Rating on my Graphic Card, my spec:
[code]...
Is there something wrong with my graphic card? i have downloaded the latest driver but when i try to get the rating, my pc will shutdown.
before i upgrade wndows vista to wndows 7, my rating is 3.8, but after upgrade my rating 3.3, WHY??
View 2 Replies View Relatedmy windows is 7 ultimate.but I can't activate the aero themes cause the rating is lower..
View 2 Replies View RelatedCannot display and play clips with a 4-5 star rating even though it is an auto playlist.
View 1 Replies View RelatedI just finished building a new computer last week. It runs very well, and it scored a 7.8 out of 7.9 overall on the Windows User Experience Rating. The problem I am having is that I had to reinstall windows (I messed up the first installation) and now when I try to run the assessment again it always crashes on "Direct3D 10 Texture Load Assessment."
I have all the latest drivers and DirectX 11 installed. Any idea why it would do this when it did not on my previous Windows installation?
My i7 990X is currently at 4.65 GHz. I was using MSI afterburner to overclock my GPU, but I confirmed that it is not the problem. Full computer specs in my profile.
i bought a new hp g62 laptop with i5 and ati . i dont know what is the problem with the resolution and the size of the screen..
View 6 Replies View Relatedi have heard a lot of my friends saying that they are unable to play high resolution and high definition games on their pc and told that they are on a low budget to buy a graphics card.here is a solution for that:there is a software named 3-d analyzer available in the internet which acts as a virtual graphics card for playing games. you can enter the graphic card needed from the 4 available graphic cards available and then you can get the attributes of that graphic card..if fine tuned,you can play games at the range of a 128mb ram virutal graphic card on your non graphic card pc. note:graphic intensive games,that requires atleast 512mb of graphics memory can't be played through 3d analyzer if you don't have a graphic card,but you can try running it if you have a 256/128 mb card. steps for using the 3-d analyzer software, *first download the file from here, *then extract that software and open the software, *then,select the exe file of the game that you want to run, *choose the select option, *then you can choose the attributes the options you require to play the game,*the attributes may be pixel shader or disable rendering in the game or emulation or some other options specified, *then,enter the device id and the vendor id for the graphics card you need from the available graphics card on the right.*i would suggest the ati radeon 9800pro to run most of the games like fifa 08/09 or prince of persia two thrones/sands of time, *then choose the run option and then i assure that the game would run for you at a decent/playable speed. note:1.if it shows any error that a file is not found pls reinstall the software.2.if the screen turns black/blank then play with the options in the s/w, by trial and error method,if fortunate,may be,you'll be able to run your favorite game.3.if pixel shader/shader version x.x not found,then select the appropriate shader model and run the game. all the best..happy gaming..if any queries post it below.how to: use 3d analyzer video at Internet
View 9 Replies View RelatedI have a desktop with an ATI Radeon 3200 HD integrated graphics,can that be changed or would i have to change the whole box?
View 9 Replies View RelatedI can't get media player to run on the system.I installed Directx 9.0c.
Also when attempting system rating I get an error saying "could not measure video playback performance"?
Suggestions?
How to switch from onboard graphics to a graphics card
View 2 Replies View Relatedanyone knows how the HD 2500 compares to the 3000 and 4000? I'm mostly looking for improved video transcoding compared to my Pentium G620 and don't really need the "gaming" graphics capabilities. But I haven't been able to find any information as to how the HD 2500 compare.
View 9 Replies View RelatedI've completed a new custom build, but have had problems with BSOD from the beginning with any installation of Intel Graphics drivers or the installation of any graphics card.
When I first completed the build, the XFX-7950 Black was installed. I booted to BIOS without issue, but when I inserted the Windows 7 (64 bit) it would boot through the windows logo screen but immediately BSOD right after going to the first install screen.
I removed the graphics card, and was able to complete the full Windows install without issue. I updated Windows and the drivers on the system but as soon as I installed the Intel 3000 Graphics driver, it would BSOD on every restart. I recovered back prior to the Graphics driver install and installed all other drivers. I updated the BIOS to the latest version.
I have reattempted the XFX 7950 multiple times in different slots, but with the same results. I also attempted my Radeon HD 4550 from my old computer but it gave the same results. It always boots through the Windows logo screen, but BSOD within a few seconds of reaching the password screen.
I broke down and installed Driver Whiz, which did detect multiple outdated drivers that I had not caught, but none of these fix the issues.
I've attached the requested zip. I don't think all BSOD's are showing up, as I've had to use recovery points after installed drivers didn't work. The last .dmp on 19 JUL was a Intel Graphics driver install attempt that I pulled off in safe mode before recovering back to the pre-driver point.
System:
ASUS P8Z68-V Pro/GEN 3
Intel 2600K
XFX R7950 Black Edition
OCZ 850W
Crucial 128 GB SSD
Seagate Barracuda 1 TB HD
Corsair H100
Windows 7 64 bit (full)
I wanted to know if i can run windows 7 with a Intel82845G Graphics Controller i did download the windows 7 upgrade advisor but it had a question mark next to it so i want to know if itll run with that.
View 8 Replies View RelatedI was playing total war shogun 2 on windows 7. Diagonal lines started shooting out of the characters, square block patterns start flashing all over the place. The graphics got progressevley worse and worse so i took in. They tested the graphics card and it was fine so they restarted the computer and then windows crashed. They reinstalled windows 7 and i started putting everything back together.
I just put total war back on my computer and started playing and its started again. I restarted my computer and all that came back was a blinking undersscore. Luckily i shutdown and it started normally but the graphics are still messed up.
I am running Windows 7 service Pack 1, 32-bit on a HP Pavilion, Pentium 4, 3.0 ghz, 1.0GB memory, 250w power source. I had a ATI Radeon 9250 PCI graphics card, 256MB ran great on XP. I know its not compatable with W.7. I play only a few older games, like EA Sports NHL 2008 & Tiger Woods Golf, is there any PCI card I could buy that will work with Windows 7?
View 5 Replies View RelatedI have been using an ATI multi monitor FireMV 2400 card for some time in Win 7 32 bit system, no problem. I am now doing a clean install Win 7 64 bit system, same exact hardware except new hard drive. I have installed the 64 bit driver for the graphics adapter. Device Manager tells me it is working properly but the Windows change resolution etc page does not recognize the card and it does not work. I get an error message from Catalyst that I need to enable the graphics adapter using the Display Manager
View 8 Replies View RelatedI don't know anything about computers, but turn on the computer for windows 7 I have to press f1 because it is looking for an adapter grahpics card. Then when I get to my screen is says "Catalyst Control Center is not supported by the driver version of your enabled grahpics card. Please update your AMD graphics driver or enable your AMD adapter using Display Manager.I only bout the Dell tower and not a new monitor.
View 10 Replies View RelatedHow do I download graphics for HP Mini notebook?
View 1 Replies View RelatedYesterday my 500w powersupply started smoking up so I went out and bought a Thermaltake Lightpower 700w powersupply. After I finished rewiring my computer I noticed my graphics card wasn't working on my computer so I changed my input from HDMI to VGA to use the integrated graphics card.I'm not sure what caused the original 500w powersupply to smoke up and why my graphics card doesn't work anymore. I'm unsure whether the graphics card isn't working because i've made a mistake in wiring the connection from my PSU to motherboard or if the PSU killed it.Yesterday I also received a USB Wireless Receiver for Xbox which I plugged in the top USB slots I never use, could this be a reason for the PSU faulting? Sometimes when I plug in a USB device the metal surrounding the slots spark up a little which is why I mentioned the USB wireless receiver.Below are the specifications of my system:
[code]...
My problem is that sometimes when I start up my computer (from both hibernation and shutdown), windows freezes(sort of) on startup. It will start up after quite some time and everything seem to be running in slow-motion. I can move the pointer and perform actions in 1-2 sec intervals with about 5-6 seconds between them.When starting up in safe-mode it will freeze totally upon loading the file CLASSPNP.SYS.At first I was concerned about some hardware malfunction, but since everything works fine on Ubuntu (dual-boot) I assume this is a software error.The only fix I've been able to apply is using system restore, but this may have to be done several times for the problem to disappear and takes forever since the computer is running in "slow-motion". Also sometimes when i leave the computer off for a day or two (or just use Ubuntu instead) it will boot up win7 just fine.Since the problem occurs quite randomly and without any warnings it's been quite hard to debug/gather information on the system while crashing, but here is what I have been able to figure out so far: * While problem occurs, both cpu cores are working at 95-99%. Processes(random ones) take turns on using 99%. * Screen will glitch heavily and message will appear in tray-bubble: "windows nvidia kernel mode driver stopped responding". Things i have tried: * Installing newest Nvidia graphics driver. * Installing older Nvidia graphics drivers. * Full format and fresh install of windows7. In the reliability monitor i was able to gather this information: * Problem: Windows failed to start because of missing system files Description: A recent driver installation or upgrade might have prevented Windows from starting.* Problem: Video hardware error Description A problem with your video hardware caused Windows to stop working correctly.
Problem signature
Problem Event Name:LiveKernelEvent
OS Version:6.1.7600.2.0.0.256.48
Locale ID:1044
Extra information about the problem
BCCode:117
BCP1:FFFFFA8004DED4E0
BCP2:FFFFF88010020354
BCP3:0000000000000000
BCP4:0000000000000000
[code]....
I recently started up my computer and a weird screen error appeared. Ill try my best to explain it. The screen is split up into 4 sections and its kinda blurry. Its almost like permanent safe mode.
View 9 Replies View RelatedI have recently had some video issues with my HP Probook 6550b.
Basically, I have recently had the heat sink, motherboard and monitor all replaced. My ongoing issue is that now Windows does now not recognize my on board ATI graphics card. If I install the drivers from the ATI website it does not acknowledge that the adaptor exists at all. Conversely, under Device Manager, no display adaptor is listed.
I have also installed the 64 bit BIOS update and graphics drivers from the HP website with no success. Interestingly, If I attach an external monitor, reboot and enter BIOS. I can close the lid, and the external VGA monitor works. However, when I then log into Windows and then try to use the secondary monitor, it does not work.
HP have informed me that as the external VGA out does work, it is not a hardware problem with the graphics adaptor. How do I go about getting this issue resolved? Currently, all video is jittery and the brightness is sub-standard.